How to make a backing track from a song? Make a minus online in excellent quality

Creating a backing track using various programs and services is not a problem. In this article we will look at what programs and resources are suitable for this process.

How to make a minus in Adobe audition

Adobe audition is a well-known assistant in editing audio files and creating backing tracks. The program supports most audio formats and is included in the Adobe Creative Suite.
First of all, you need to launch Adobe audition.
Next, open the audio file from which you want to make a minus.
On the main page of Adobe Audition, click on the “File” inscription and select a song that is in the memory of a personal computer or any other media using the usual overview menu.

Important: the track must be in waw format. You can also use the mp3 format, but in this case the composition must be in good quality. Otherwise, creating a minus in the standard way will not work.

Advice: Don't rush into saving a minus. First, listen to the entire recording.

How to make a minus in FL studio

How to make a minus in Audacity

Audacity is a sound station for music creation. Audacity is one of the programs used by professional composers.
To create, follow the instructions below:
First of all, you need to launch the program, after which the main page will open. In the upper right corner you need to click on the inscription “File”, and then click “Open”.
You need to select the desired song using a special file browser.
After completing the previous step, in the upper left corner you need to select “Split Stereo Track” (in Russian: split the stereo track).
There were two entries. Select mono or stereo mode for each song.
Next, you need to select one of the resulting compositions, after which you need to select the “Invert/Effects” item.
The minus creation process is complete. All that remains is to upload the file to your PC; to do this, you need to go to the “File” menu, and then click on “Export”.

Review of online services for removing vocals from a song

Online services are also popular among users.
The most famous services:

• Vocal remover
• Ruminus
• Vocalremover.PRO

Advice: To work with the service, it is best to use the Google Chrome browser. Do not use the Mozilla Firefox browser, as lags have been repeatedly noticed when working with it.

• To process a piece of music, follow the following Link.
• Click on the words “Download audio file”.
• Select the desired file and wait for it to be downloaded and subsequently processed.
• To listen to the result, left-click on the “Play” inscription. If you want to save the received recording, click “Download file”.

• Follow the Link.
• Left-click on the “Browse” tab and select the desired track, then click on the “Download” inscription.
• Next, you need to click on the “Make crush” button. The process usually takes no more than thirty seconds.
• Next, you will have the opportunity to listen to the resulting minus and download it to your PC.

• Follow the link.
• Click on the “Browse” tab and select the desired composition.
• Type the text suggested by the resource to check.
• Click on the inscription “Create karaoke Track”.
• Wait until the file is processed.
• To download the minus, click on the inscription “Download”.

How to remove background vocals

Is the online service capable of making a backing track without crushing?

Karaoke lovers and people who connect their lives with creating music often wonder how to remove vocals from songs. The cost of professionally performed “cons” is very high. What to do if you don’t have enough money, but you really want to buy a song without vocals? A program for creating a backing track will help you get a “voiceless” track. The user just needs to be patient and use his imagination.

FL Studio

The application is suitable for those who need a utility for high-quality processing of tracks with a large number of options. FL Studio is a program for creating a backing track from a plus track. The application is quite difficult to master. The developers tried to make the interface as accessible as possible. The utility allows you to create and process music on your PC.

The program has a large number of different effects. The user has access to the option of internal mixing. The application has support for DirectSound and ASIO drivers. If the user wishes, the sound of a synthesizer, piano and other instruments is added to the track. During operation, the program for creating a backing track may cut off high frequencies.

To make the interface clearer, you should download a freely available localization code along with the utility. The license cost is $99. In the trial version of the program, you will not be able to save the result. The application is suitable not only for professionals, but also for beginning music creators.

Cubase

This is the best program for creating backing tracks (in Russian). The Cubase application is one of the main competitors of the FL Studio utility. The program has many high-quality project templates. The user can work with a built-in mixer and a set of filters and effects. The latest version of the utility was released in Russian.

The authors of the project offer many tools for working with notes. If necessary, you can load several tracks into the program at once. Thanks to VST extensions, a professional studio has almost unlimited functionality. A program for creating backing tracks from songs is often used to change the sound of tracks in real time. Among the disadvantages, it is necessary to note the demands on PC hardware and the high cost of the license.

Audacity

This utility is the most popular program for creating backing tracks (in Russian). Using the application, the user can record sounds from any sources, digitize analog recordings, apply special effects, turn on a timer, and edit tracks and metadata. The program allows you to download several audio tracks at once. Songs can be combined into one audio file. The user has the option of aligning tracks according to various parameters.

The most commonly used functions are to create a backing track by removing vocals from a recording, eliminating noise and silence, adjusting the volume level, and turning on the equalizer. Among the shortcomings, it is worth noting the inconvenient interface. To export the file to the desired format, you will need to download the LAME codec.

Sony Acid Pro

The program for creating a backing track provides the user with the opportunity to obtain professional-quality music. The application has no restrictions on the number of songs you can download. The basis for the compositions are looped fragments and MIDI tracks. Using software, you can create a soundtrack with a surround sound effect and add audio to a video. The application is stable.

Songs created using Sony's utility can be exported to files in various formats. The installer size is 145.2 MB. The program for creating backing tracks is distributed free of charge. The utility interface is in Russian.

Adobe Audition

With this program, music creators remove noise and vinyl "clicks". A professional digital studio can also be used to create a backing track. In order to get the desired result, you need to cut songs without vocals and “glue” them together into a single whole. You can create a separate track for each instrument and then mix the melodies. To make a backing track in the application, you need to launch the program and cut out the first part of the song with the voice.

Then you need to find a fragment that best matches the track with vocals and delete it. Then you need to compare the resulting segments so that silence does not end up in the backing track. Next, you should mix the fragments into one file. To remove “traces” of vocals, you need to hold down the Alt + Z keys and determine the main frequencies of the voice. The exact value is selected in the Notch filter.

It opens by pressing the Ctrl button. Then you need to copy the music to the end and mix it. The second verse is edited in the same way. It is unlikely that you will be able to make a full-fledged “minus”, but it’s worth a try. The result should be saved in any supported format.

GoldWave

Users who are interested in (backing track) often encounter this paid application. The utility differs from analogues in a large number of musical effects. The user can experiment with a trial version of the utility. To do this, you need to open the main window and transfer the sound file there. Then you need to select the “effects” section in the menu and check the “stereo” item.

On the last tab, the user will have to work with the “reduce vocals” effect. Here you can remove the voice or frequency. The desired result will not be obtained immediately. The user can enable the Stereo Center effect. Then you need to select the line “remove vocals”.

The FFT setting allows you to achieve the most acceptable ratio between distortion and echo sound. Using the “overlap” option, you can make a smooth transition between fragments. Next, you should enable preview and save the resulting file. To make a backing track using the “channel mixer” function, you need to select the “cut vocals” line in the submenu. It is worth noting that different effects may be suitable for each individual track.

AIMP3 player

This is a free application familiar to many users. The utility interface is in Russian. The player is designed for listening and recording music. Not everyone knows that the program allows you to create backing tracks. To complete this task, you need to launch the utility and select the desired track.

Then you need to go to the “sound effects” section in the settings. Then you should switch to the “voice manager” tab and select the “vocal removal filter” line. The player will create a backing track from any added track. Among the disadvantages of the utility, it is worth noting the inability to save the result. A user who wants to disable this feature must uncheck the corresponding item in the settings.

You will need

• - computer;
• - sound editor;
• - additional programs for processing and recording sound;
• - basic technical skills;
• - if possible, record a song;
• - studio equipment for recording.

Instructions

There are two main ways to create. The first, simpler one, allows you to make a minus from an already recorded song. This option is suitable for performing songs written by other composers. The sequence of actions is minimal.

Load the audio recording of the song into any audio editor. Sound engineers often prefer programs such as Audition, Cubase, Sound Forge, and less commonly Audacity. Choose the application that is clearer and closer to you.

Using program tools or additional processing tools, cut out the mid frequencies of the track. This is where the vocal part is usually located. The algorithm of actions varies in different editors. Listen to the result to ensure success. The disadvantage of this method is that either the voice does not disappear completely, or a number of accompaniment parts disappear with it. As a result, the backing track sounds either with a muffled voice or with some emptiness.

The second way to record backing tracks is to record from scratch. It differs little from recording a regular track, the only difference is the absence of a voice part.

When recording a backing track from scratch, much attention is paid not only to the equipment, but also to the acoustic properties of the recording room. As a rule, a professional recording studio satisfies all the requirements: the amplifiers convey all shades of sound quite clearly, the walls have good sound insulation, and the sound engineer can control the process with a sufficient degree of professionalism.

The order of recording instruments is traditional: drums first, then bass guitar and the rest of the rhythm section (for example, rhythm guitar). Then echoes, from low to high. After this, the sound engineer equalizes the volume of the parts, removes noise and combines the tracks into one track. Detailed entries are provided in the link below the article.

Sources:

• Tips for beginning sound engineers
• how to make a quality electric guitar yourself

We may need backing tracks quite often. For example, you need to make a number for some event or concert, design a video, in the end, some people just want to sing at home, delighting or infuriating their household members. The easiest way to download the backing track is on the Internet; there are specialized sites where you can find quite a lot of similar material. However, it is not always possible to find the necessary backing track, or you can only download it for a fee. Let's try to make a backing track from the song ourselves.

Instructions

To get started, download a music editor called Audacity. This is a fairly convenient and, most importantly, free editor with a very clear control panel. Install the program on yours and run it.

Click the "File" tab, select the audio recording you need. It will open as a spectrum in your program. Then grab the edges of the track with your mouse and stretch it - this will make it more convenient for you to work with it. Divide your track into two - right and left. To do this, select the appropriate one in the track management menu. Set each channel to Mono so that they have the same sound.

Select one of the channels by clicking on it with the mouse, call the “Invert” function in the “Effects” tab. Now listen to what you got by clicking the button in the main menu of the program.

Compose the parts of all the instruments in the track one by one in this order: drums, bass, the rest of the rhythm section, backing vocals. Lastly, insert the vocal tracks and process according to your needs.

Mix the track: remove overtones, balance the volume of each track, adjust the frequencies. Add effects in the final stage. Save the file in .mp3 or .waw format depending on your purpose.

Sources:

• Voice programs
• how to remix

Every person has a favorite artist whose songs they always want to listen to. Having an ear and experience in audio/MIDI editors, you have the opportunity to perform tracks of a famous musical personality yourself. To do this you just need to create backing track to his song. A backing track is a musical composition in which any part is missing, be it vocals, guitar, piano, saxophone, etc. There are a great many options for creating backing tracks, but only a few are simple and effective.

Instructions

To create your own backing track, first of all, you need a program on your computer to work with audio/MIDI. To create it, you can use the Sonar 8 program. It is quite effective for solving this problem.
First of all, you need to import the audio file into the sequencer (software for recording and playing midi files). Then you should align the first beat to the beginning of the bar.

Next you need to choose the tempo. The best option is when it has no slowdowns or accelerations, that is, at an “even” pace. Then you should turn on the mitronome and align the peaks with the bar lines. Tempo is also possible using the Tempo window. To do this, click on it. The “Click here to tap tampo” button will appear in the window. If you click on it to the beat of the song, you can roughly calculate the tempo.

If the tempo in a song is not even, you will have to have different values ​​in the tempo map for each measure.
Next, you need to open the Piano Roll, and listen to the material in parts, and write out the parts note by note. It is also possible to play them on, which is synchronized with the cord using a cord.

You can then choose which instrument to register first. The selection of tools is quite simple. You need to look through all the plugins and samples, which will help you choose the sounds that are most similar to the original instruments.
When listening, you need to write down unclear parts in triads. Arranged verses and choruses can help with further navigation.

Next, you need to mix the previously created musical parts. Tackle the less important instruments first, then you can mix the rest. You should regularly check the overall balance and ensure that all areas of the range are filled evenly.

For that? so that the guitar produces a more or less decent sound, amplifier simply necessary. But it is not at all necessary to spend a lot of money on its acquisition. The amplifier is not so difficult to assemble at home if you have the necessary parts.

You will need

• - circuit for amplifier$
• - digital receiver$
• - DAC$
• - operational amplifier$
• - stabilizer for microcircuits$
• - active filter$
• - printed circuit board$
• - housing for amplifier/

Instructions

Purchase and arrange all the necessary parts on the desktop. In order for the sound not to suffer, do not regret it. Remember that if you do something, then do it well and with high quality. Besides? It is advisable to have some experience in soldering or at least carefully study this issue, and then start assembling. Because illiterate actions can reduce the chances of enjoying excellent sound to zero.

Prepare the PCB. You can make it yourself, buy it at the market or even from people who make such things. But it is impossible to answer unequivocally which method will be more reliable. It's up to you to decide. Remember that the convenience of purchasing a board on the market is that you can buy other spare parts at the same time. In any case, when you have a printed circuit board, consider that all that remains is to strictly follow the instructions. Carry out the assembly very carefully, carefully avoiding mistakes. Otherwise, all your work may end up going down the drain.

Arrange and secure all the parts from the list in their places according to the diagram. Next, you need to seal and recheck all the parts. Only after you have made sure several times that you have done everything according to the diagram and have not made a mistake anywhere, you can proceed to connecting the device for further use.

Buy good speakers or use the best ones you have at home. Only high-quality equipment can fully demonstrate the results of your work. Good speakers can also help identify defects during assembly if the sound is not completely satisfactory or not to your liking at all. And if everything is in order, then they will certainly pass on all the work and effort you put into working on this unit.

Video on the topic

Tip 8: Printer calibration: how to do it professionally

When printing your own photos at home, do not forget about calibration printer for each series of photographs. Modern printers are equipped with all the capabilities that allow you to adjust the print color automatically, but only the trained eye of a photographer or artist can choose the shades he needs.

You will need

• - Adobe Photoshop software;
• - photo printer;
• - ProfilerPro plugin.

Instructions

If you look closely at the printing process, you can see some of the subtleties of the materials used and processed. For example, the ratio of paper and paint is an integral element of printing, where paper is not just a white sheet, but a kind of storage, the type of which will make the finished photographs look different. Therefore, each type of paper must undergo another printer.

It is not yet clear to a beginner in this business whether calibration is being done, but an experienced photographer or artist will point out such a “standard” print. The image you see on your monitor may be very different from what you see on the photo you just printed.

Professional photographers use different programs when processing photographs; many prefer the already famous Adobe Photoshop program. This graphic editor is not difficult to install, and the capabilities it offers should be enough for any photographer. To calibrate the color gamut of the output image, you can use the ProfilerPro plugin.

After installing this plugin, you must select the Adobe RGB workspace in the program settings. When you launch this plugin, you need to make a choice from two items: activate the ProfilerPro item.

In the printing settings window that opens, go to the “Color Management” block, select “Print Profile”, then activate the Same as source option.

In the settings itself printer You need to disable the color correction option. By these actions we specify printing without processing internal program filters and printer.

This way you get a “clean image” that will look the same as on the screen. If you need to change the gamma or adjust one of the colors, this can be done through the internal interface of the plugin.

« Hip-hop" means "word", "rhythmic fast speech with accompaniment." Mastering the technique of this style of music usually does not cause any difficulties, but there are often problems with superimposing well-read text onto sound. As a rule, beginners use ready-made “backing tracks”, but you can create them yourself.

You will need

• FL Studio, MixVibes DVS Pro, Dance Ejay, Hip Hop eJay.

Instructions

First, find out what bits mean cons. The word “beat” refers to the rhythm of the song, the drum part, which serves as a support during the creation of a rap composition.

Nowadays it is quite easy to find and download a cons program on the Internet. The difficulty lies only in choosing the right program. FL Studio is considered to be the best program for creating music, as it is quite simple and easy to use.

Transitions play a major role in creating hip-hop backing tracks. In other words, it is very important to make a bit change at a certain moment. This usually happens during the verse change, the kick begins. Or vice versa. The main thing is that the transition should only complement the composition, but in no case spoil it. After that, arrange a part of hi-hats (hi-hats) or percussion (percussion).

Once the beat is ready, create a hip-hop melody. It is also important to choose the right tool. You can use orchestral sounds or synthesizer sounds. When creating music on a computer, VST (Virtual Studio Technology) can be used, which you can choose to suit your taste.

Having at least the skills to play any musical instrument, create a melody. Use sampling when only one part of a sound recording is used, for hip-hop this is a sample (as a separate part or one instrument in a new hip-hop recording). This is usually done using a sampler, which is included in the recording equipment and is part of it, or a special program (FL Studio).

Once the melody and beat are complete, start working on the bass. And in order for the track to have an interesting sound, add some effects at the end.

The last stage – mastering and mixing – is the most difficult. With the help of mastering, you need to turn your creativity into real art. And with the help of mixing, a set of tracks turns into a complete piece of music and, thereby, completes the creation of a hip-hop minus.

Sources:

• creating rap cons in 2019

The backing track of a song is a phonogram in which the part of one of the instruments or vocals is missing. Backing tracks are widespread because... enable the performer, by turning on such a phonogram, to learn the part of his instrument or sing to it. “Cons” are often used in karaoke, KVN performances, and at various holidays.

Currently, on various websites you can find backing tracks for almost all famous songs. Some of them were recorded in professional studios, and some were created by folk craftsmen who synthesize sound effects on computers.

The largest and most famous sites from which you can: http://a-minus.org/, http://x-minus.org, http://b-track.ru/, etc. They differ from each other only in the interface and the set of tracks available for downloading. There are no problems in downloading the backing track of a song to your computer from one of these resources. You don't even need to register. Using the search system installed on the site, you need to find the required track and download it with one click. At the same time, the site may have several backing tracks of one song, differing in their quality. Therefore, you can choose the most suitable option.

If none of the sites listed above has the backing track you need, or it sounds unsatisfactory, then don’t despair. Continue your search on the Internet, most likely the record you need will be found on some resource. It may be that the song is new and the backing track for it is simply not available yet, then you just need to be patient and wait.

How to make a simple cannon in Minecraft without mods

The simplest and most primitive weapon is designed to shoot dynamite. For construction you will need the following items:

Solid blocks;

Red dust;

Repeaters - 4 pcs.;

Bucket of water;

A button designed to activate the gun.

Initially, find the most optimal place to place the gun, since it will not be portable. Then build a T-shaped foundation using obsidian or other hard blocks. There should be a cavity in the center of the base into which water should be poured.

At the back end of the building, place several restrictor blocks that will help not block the water source when you add dynamite. Install repeat and connect them using red dust. The button will help your cannon detonate successfully.

Place sticks of dynamite, as well as a shell, into the cavity of the gun.

How to build an advanced cannon in Minecraft

A successfully created simple cannon can only be improved to create a more powerful weapon. You will need:

Red dust.

Add a small amount of sand to the structure and pistons, which should be connected with red dust.

How to build a dynamite cannon in Minecraft

You will need:

Obsidian;

Dynamite sticks;

Redstone torch.

The process of creating a dynamite cannon is quite simple and consists of making a column of obsidian 5-10 blocks high and 1 block thick. Create a platform on a column of obsidians on which to place 8 sticks of dynamite and a redstone torch. This operation should be performed in the form of a square, in the center of which there will be a torch.

The principle of operation of this weapon is as follows: 4 pieces come into contact with the torch, then detonate and launch the remaining 4 dynamites at various distances.

Many of us are karaoke lovers. Many people have the desire to sing the words of their favorite song to their favorite music, but they don’t always have the right track, free of vocals, at hand. In this case, online resources will come to the rescue and help you remove vocals from the composition you need. In this article I will tell you how to remove a voice from a song online, what online services exist for this, and how to work with them.

How to remove a voice from a song efficiently online

There are several popular services on the Internet that offer to cut vocals from a song online (i.e., perform a backing track online). At the same time, to get a decent result, you need a basic audio file of good quality with a bitrate of at least 192 kbit/s (optimally 320 kbit/s).

Quite often, after the backing track is completed, the vocals remain audible in the background, albeit in a muffled form. If such a result is not acceptable to you, then you can search for the required backing track on special resources that have databases of backing tracks, and also turn to a professional for help (for the appropriate fee).

The best services for creating backing tracks online

So, how to remove words from a song and leave only the music using online services? Below I will list the relevant network resources and also explain how to work with them.

Service "Capital Records"

This service belongs to one of the Moscow recording studios. In addition to various commercial sections, the resource also has the ability to create backing tracks online.

To implement this, go to the resource, click on the “Select file” button, and point the system to the path to the desired audio file on your PC. The system will upload your file to the resource, and then offer three options for processing the track:

• Remove vocals from a song (standard backing track);
• Change key (raises or lowers the key of the track by the required number of semitones);
• Change track tempo (increases or decreases track speed).

After you check the box next to one of the processing options, click on the “Process” button below. After processing is complete, you can listen to the result and download it to your PC.

Vocalremover service

The second online service that allows you to suppress vocals in a song is the Vocalremover service. I’ll note right away that it works best with the Chrome browser and other browsers based on the Chromium engine, but when working with the Mozilla browser, this resource has problems.

Service Vocalremover.PRO

Another resource that allows you to make a backing track online for free. The resource has an English-language interface (which is not always convenient for domestic users), but using its capabilities is no less simple than the resources listed above. The advantages of the resource also include the ability to create backing tracks from the music of YouTube videos.

RuMinus service

Another service that allows you to perform high-quality backing tracks online. Its functionality is similar to the services described above, and you will not see any differences here.

Services with backing track databases

You can also use a set of services that have a fairly large database of backing tracks. In particular, the social network Mixiple (vkmonline.com/minusovki) offers a search in its database of backing tracks; you can also use the services X-Minus, Mixpromo, BackingTracks and other analogues.

Working with these services is simple. Just type the name of the desired composition (or artist) in the search bar, the system will look for matches and give you the result, which, if desired, you can download to your PC.

Video

To remove a voice from a song online, it will be enough to use one of the resources I listed above. At the same time, it is not always possible to obtain high-quality backing tracks at the output; much depends on the quality of the base file itself. If you are not satisfied with the quality of the resulting processing, then you should look for a ready-made backing track on the appropriate resources, or turn to paid help from professionals.

Want to create an instrumental version of your favorite piece of music? Perhaps you need to create a back track? Or do you already have a song but no original tracks and need to change the vocals? Be that as it may, you can remove the voice from any song using the free audio editor Audacity.

Things to Keep in Mind Before Removing Vocals from a Song

If you're going to cut a voice from a track that you don't own the copyright to, remember that the resulting recording can only be used for personal use. Using a "homemade" version of a song, for example, as a backing track in concert performances is illegal. On the other hand, you may want to remove vocals from your own composition to create a certain atmosphere.

How does it work and is it possible to properly remove a voice from a song?

It’s worth noting right away that removing a voice from a song without degrading the sound of the original composition almost impossible. The process of voice cutting simply boils down to cutting out certain frequencies (corresponding to a person's voice) in a song. In other words, along with the voice, all other sounds in a given frequency range are cut out of the song. Typically this range is from 500 to 2000 Hz.

How to Cut (Delete) Vocals in a Song Using Audacity on Windows, Mac and Linux

Open the official Audacity website, download and install a free audio editor(versions available for Windows, Mac and Linux). If your device has an outdated version of the program, update it to Audacity 2.2.0 or higher. The program has been partially translated into Russian.

Note. In addition to the above option, there are other editors that allow you to remove vocals. Essentially they are all the same.

1. Click "File" → "Open" to select the audio file you want to edit. Once the file is downloaded, play it back and identify any areas where vocals are present.

2. Select the desired area in the track where you want to remove the voice, or double-click anywhere in the song that opens to select the entire song.

3. Go to menu "Effects" → Vocal remover.

The filter offers three options: "Simple", "Remove frequency band" And "Retain frequency band". Start with parameter "Simple" and use the option "Listen" to preview the result. If you are happy with it, click OK. Otherwise, use other options until you find a better solution. If you accidentally use a tool with the wrong settings, you can undo the action using Ctrl + Z (⌘Cmd + Z on Mac) or “Edit” → “Undo”.

After you are done, use the option “File” → “Save Project” to save changes. To create a new MP3 file, open “File” → “Export” → “Export as MP3”.