How to remove a voice from a song online in two clicks. Make a minus online in excellent quality

Creating a backing track using various programs and services is not a problem. In this article we will look at what programs and resources are suitable for this process.

How to make a minus in Adobe audition

Adobe audition is a well-known assistant in editing audio files and creating backing tracks. The program supports most audio formats and is included in the Adobe Creative Suite.
First of all, you need to launch Adobe audition.
Next, open the audio file from which you want to make a minus.
On the main page of Adobe Audition, click on the “File” inscription and select a song that is in the memory of a personal computer or any other media using the usual overview menu.

Important: the track must be in waw format. You can also use the mp3 format, but in this case the composition must be in good quality. Otherwise, creating a minus in the standard way will not work.

Advice: Don't rush into saving a minus. First, listen to the entire recording.

How to make a minus in FL studio

How to make a minus in Audacity

Audacity is a sound station for music creation. Audacity is one of the programs used by professional composers.
To create, follow the instructions below:
First of all, you need to launch the program, after which the main page will open. In the upper right corner you need to click on the inscription “File”, and then click “Open”.
You need to select the desired song using a special file browser.
After completing the previous step, in the upper left corner you need to select “Split Stereo Track” (in Russian: split the stereo track).
There were two entries. Select mono or stereo mode for each song.
Next, you need to select one of the resulting compositions, after which you need to select the “Invert/Effects” item.
The minus creation process is complete. All that remains is to upload the file to your PC; to do this, you need to go to the “File” menu, and then click on “Export”.

Review of online services for removing vocals from a song

Online services are also popular among users.
The most famous services:

• Vocal remover
• Ruminus
• Vocalremover.PRO

Advice: To work with the service, it is best to use the Google Chrome browser. Do not use the Mozilla Firefox browser, as lags have been repeatedly noticed when working with it.

• To process a piece of music, follow the following Link.
• Click on the words “Download audio file”.
• Select the desired file and wait for it to be downloaded and subsequently processed.
• To listen to the result, left-click on the “Play” inscription. If you want to save the received recording, click “Download file”.

• Follow the Link.
• Left-click on the “Browse” tab and select the desired track, then click on the “Download” inscription.
• Next, you need to click on the “Make crush” button. The process usually takes no more than thirty seconds.
• Next, you will have the opportunity to listen to the resulting minus and download it to your PC.

• Follow the link.
• Click on the “Browse” tab and select the desired composition.
• Type the text suggested by the resource to check.
• Click on the inscription “Create karaoke Track”.
• Wait until the file is processed.
• To download the minus, click on the inscription “Download”.

How to remove background vocals

Is the online service capable of making a backing track without crushing?

How to make a backing track? This question plagues many (especially beginning) vocalists.

How to make a backing track using a regular computer, without having professional programs at your disposal? Indeed, why does the performer need unnecessary problems. Everyone wants the task of removing a voice from a song to be solved in two simple clicks. But in practice it is somewhat different.

Once again I want to note that it is impossible to make a high-quality minus using all the methods I described. In any case, after all the operations performed, it is not possible to completely get rid of vocals. In addition, you will lose a lot in quality (the instruments will sound much poorer). You can only make a really high-quality minus by writing it from scratch.

So let's get started!

How to make a backing track in Audacity

Option one (Mono)

1. Launch the program, select File/Open or Ctrl+O and download the required file

2. In the upper left corner, next to the name of the composition from the list, select the item Split Stereo Track(split stereo track).

Now we have two tracks.

3. In the same list, select mono mode for each track.

4. Select one of the tracks and select a menu item Effects / Invert

5. Save the result. Let's choose File / Export (Ctrl+Shift+E), indicate the export location and file type.

Let's listen to the result

Option two (Stereo)

1. Launch the program and open the required file.

2. Select an item Effects / Vocal Remover (for center – panned vocals)…

3. Set the following parameters:

A . Remove vocals or view Help – Remove vocals(vocal removal);

IN . Removal choice – Remove frequency band(removing a frequency band);

WITH . Frequency band lower and upper limit – 200 16000(lower and upper limits for frequency band removal; set experimentally, depending on the composition).

Click OK.

4. Save the result Ctrl+Shift+E

Aria - Ice Shard (before processing)

Aria - Ice Shard (after processing)

This backing track can be used at local performances or at home parties. Larger events require a completely different approach.

In this article I talked about it in the free audio editor Audacity.

Clearing any composition from the performer's voice is used quite often. Professional audio editing programs, for example, can handle this task well. In cases where you do not have the necessary skills to work with such complex software, the special online services presented in the article come to the rescue.

Sites have tools to automatically process audio recordings to try to separate vocals from music. The result of the work done by the site is converted into the format of your choice. Some of the online services presented may use the latest version in their work.

Method 1: Vocal Remover

The best free site to remove vocals from a song. It works in semi-automatic mode, when the user only needs to adjust the filter threshold parameter. When saving, Vocal Remover offers you to choose one of 3 popular formats: MP3, OGG, WAV.

1. Click the button "Select an audio file to process" after going to the main page of the site.



2. Select the song to edit and click "Open" in the same window.



3. Use the corresponding slider to change the filter frequency parameter by moving it left or right.



4. Select the final file format and audio bitrate.



5. Download the result to your computer by clicking the button "Download".



6. Wait for the audio recording to finish processing.



7. The download will start automatically via your internet browser. The downloaded file looks like this:

Method 2: RuMinus

This is a repository of backing tracks of popular performances collected from all over the Internet. It has in its arsenal a good tool for filtering music from voices. In addition, RuMinus stores the lyrics of many popular songs.

1. To get started with the site, click "Select file" on the main page.



2. Select the composition for further processing and click "Open".



3. Click "Download" opposite the line with the selected file.



4. Start the process of removing vocals from a song using the button that appears "Make a crush".



5. Wait until the processing process is completed.



6. Preview the finished composition before downloading. To do this, click the play button in the appropriate player.



7. If the result is satisfactory, click the button "Download the received file".



8. The Internet browser will automatically begin downloading the audio recording to your computer.

Method 3: X-Minus

Processes downloaded files and removes vocals from them as far as technically possible. As in the first service presented, frequency filtering is used to separate music and voice, the parameter of which can be adjusted.

The process of removing vocals from any song is really difficult. There is no guarantee that any downloaded song will be successfully separated into musical accompaniment and artist's voice. An ideal result can only be obtained when the vocals are recorded in a separate channel, and the audio file has a very high bitrate. However, the online services presented in the article allow you to attempt such a separation for any audio recording. It is quite possible that from the composition you have chosen you will be able to get karaoke music in a few clicks.

You will need

• - computer;
• - sound editor;
• - additional programs for processing and recording sound;
• - basic technical skills;
• - if possible, record a song;
• - studio equipment for recording.

Instructions

There are two main ways to create. The first, simpler one, allows you to make a minus from an already recorded song. This option is suitable for performing songs written by other composers. The sequence of actions is minimal.

Load the audio recording of the song into any audio editor. Sound engineers often prefer programs such as Audition, Cubase, Sound Forge, and less commonly Audacity. Choose the application that is clearer and closer to you.

Using program tools or additional processing tools, cut out the mid frequencies of the track. This is where the vocal part is usually located. The algorithm of actions varies in different editors. Listen to the result to ensure success. The disadvantage of this method is that either the voice does not disappear completely, or a number of accompaniment parts disappear with it. As a result, the backing track sounds either with a muffled voice or with some emptiness.

The second way to record backing tracks is to record from scratch. It differs little from recording a regular track, the only difference is the absence of a voice part.

When recording a backing track from scratch, much attention is paid not only to the equipment, but also to the acoustic properties of the recording room. As a rule, a professional recording studio satisfies all the requirements: the amplifiers convey all shades of sound quite clearly, the walls have good sound insulation, and the sound engineer can control the process with a sufficient degree of professionalism.

The order of recording instruments is traditional: drums first, then bass guitar and the rest of the rhythm section (for example, rhythm guitar). Then echoes, from low to high. After this, the sound engineer equalizes the volume of the parts, removes noise and combines the tracks into one track. Detailed entries are provided in the link below the article.

Sources:

• Tips for beginning sound engineers
• how to make a quality electric guitar yourself

We may need backing tracks quite often. For example, you need to make a number for some event or concert, design a video, in the end, some people just want to sing at home, delighting or infuriating their household members. The easiest way to download the backing track is on the Internet; there are specialized sites where you can find quite a lot of similar material. However, it is not always possible to find the necessary backing track, or you can only download it for a fee. Let's try to make a backing track from the song ourselves.

Instructions

To get started, download a music editor called Audacity. This is a fairly convenient and, most importantly, free editor with a very clear control panel. Install the program on yours and run it.

Click the "File" tab, select the audio recording you need. It will open as a spectrum in your program. Then grab the edges of the track with your mouse and stretch it - this will make it more convenient for you to work with it. Divide your track into two - right and left. To do this, select the appropriate one in the track management menu. For each channel, select Mono mode so that the sound in them matches.

Select one of the channels by clicking on it with the mouse, call the “Invert” function in the “Effects” tab. Now listen to what you got by clicking the button in the main menu of the program.

Compose the parts of all the instruments in the track one by one in this order: drums, bass, the rest of the rhythm section, backing vocals. Lastly, insert the vocal tracks and process according to your needs.

Mix the track: remove overtones, balance the volume of each track, adjust the frequencies. Add effects in the final stage. Save the file in .mp3 or .waw format depending on your purpose.

Sources:

• Voice programs
• how to remix

Every person has a favorite artist whose songs they always want to listen to. Having an ear and experience in audio/MIDI editors, you have the opportunity to perform tracks of a famous musical personality yourself. To do this you just need to create backing track to his song. A backing track is a musical composition in which any part is missing, be it vocals, guitar, piano, saxophone, etc. There are a great many options for creating backing tracks, but only a few are simple and effective.

Instructions

To create your own backing track, first of all, you need a program on your computer to work with audio/MIDI. To create it, you can use the Sonar 8 program. It is quite effective for solving this problem.
First of all, you need to import the audio file into the sequencer (software for recording and playing midi files). Then you should align the first beat to the beginning of the measure.

Next you need to choose the tempo. The best option is when it has no slowdowns or accelerations, that is, at an “even” pace. Then you should turn on the mitronome and align the peaks with the bar lines. Tempo is also possible using the Tempo window. To do this, click on it. The “Click here to tap tampo” button will appear in the window. If you click on it to the beat of the song, you can roughly calculate the tempo.

If the tempo in the song is not even, the tempo map will have different values ​​for the measures.
Next, you need to open the Piano Roll, and listen to the material in parts, and write out the parts note by note. It is also possible to play them on, which is synchronized with the help of a cord.

You can then choose which instrument to register first. The selection of tools is quite simple. You need to look through all the plugins and samples, which will help you choose the sounds that are most similar to the original instruments.
When listening, you need to write down unclear parts in triads. Arranged verses and choruses can help with further navigation.

Next, you need to mix the previously created musical parts. Tackle the less important instruments first, then you can mix the rest. You should regularly check the overall balance and ensure that all areas of the range are filled evenly.

For that? so that the guitar produces a more or less decent sound, amplifier simply necessary. But it is not at all necessary to spend a lot of money on its acquisition. The amplifier is not so difficult to assemble at home if you have the necessary parts.

You will need

• - circuit for amplifier$
• - digital receiver$
• - DAC$
• - operational amplifier$
• - stabilizer for microcircuits$
• - active filter$
• - printed circuit board$
• - housing for amplifier/

Instructions

Purchase and arrange all the necessary parts on the desktop. In order for the sound not to suffer, do not regret it. Remember that if you do something, then do it well and with high quality. Besides? It is advisable to have some experience in soldering or at least carefully study this issue, and then start assembling. Because illiterate actions can reduce the chances of enjoying excellent sound to zero.

Prepare the PCB. You can make it yourself, buy it at the market or even from people who make such things. But it is impossible to answer unequivocally which method will be more reliable. It's up to you to decide. Remember that the convenience of purchasing a board on the market is that you can buy other spare parts at the same time. In any case, when you have a printed circuit board, consider that all that remains is to strictly follow the instructions. Carry out the assembly very carefully, carefully avoiding mistakes. Otherwise, all your work may end up going down the drain.

Arrange and secure all the parts from the list in their places according to the diagram. Next, you need to seal and recheck all the parts. Only after you have made sure several times that you have done everything according to the diagram and have not made a mistake anywhere, you can proceed to connecting the device for further use.

Buy good speakers or use the best ones you have at home. Only high-quality equipment can fully demonstrate the results of your work. Good speakers can also help identify defects during assembly if the sound is not completely satisfactory or not to your liking at all. And if everything is in order, then they will certainly pass on all the work and effort you put into working on this unit.

Video on the topic

Tip 8: Printer calibration: how to do it professionally

When printing your own photos at home, do not forget about calibration printer for each series of photographs. Modern printers are equipped with all the capabilities that allow you to adjust the color of the print automatically, but only the trained eye of a photographer or artist can choose the shades he needs.

You will need

• - Adobe Photoshop software;
• - photo printer;
• - ProfilerPro plugin.

Instructions

If you look closely at the printing process, you can see some of the subtleties of the materials used and processed. For example, the ratio of paper and paint is an integral element of printing, where paper is not just a white sheet, but a kind of storage, the type of which will make the finished photographs look different. Therefore, each type of paper must undergo another printer.

It is not yet clear to a beginner in this business whether calibration is being done, but an experienced photographer or artist will point out such a “standard” print. The image you see on your monitor may be very different from what you see on the photo you just printed.

Professional photographers use different programs when processing photographs; many prefer the already famous Adobe Photoshop program. This graphic editor is not difficult to install, and the capabilities it offers should be enough for any photographer. To calibrate the color gamut of the output image, you can use the ProfilerPro plugin.

After installing this plugin, you must select the Adobe RGB workspace in the program settings. When you launch this plugin, you need to make a choice from two items: activate the ProfilerPro item.

In the printing settings window that opens, go to the “Color Management” block, select “Print Profile”, then activate the Same as source option.

In the settings itself printer You need to disable the color correction option. By these actions we specify printing without processing internal program filters and printer.

This way you get a “clean image” that will look the same as on the screen. If you need to change the gamma or adjust one of the colors, this can be done through the internal interface of the plugin.

« Hip-hop" means "word", "rhythmic fast speech with accompaniment." Mastering the technique of this style of music usually does not cause any difficulties, but there are often problems with superimposing well-read text onto sound. As a rule, beginners use ready-made “backing tracks”, but you can create them yourself.

You will need

• FL Studio, MixVibes DVS Pro, Dance Ejay, Hip Hop eJay.

Instructions

First, find out what bits mean cons. The word “beat” refers to the rhythm of the song, the drum part, which serves as a support during the creation of a rap composition.

Nowadays it is quite easy to find and download a cons program on the Internet. The difficulty lies only in choosing the right program. FL Studio is considered to be the best program for creating music, as it is quite simple and easy to use.

Transitions play a major role in creating hip-hop backing tracks. In other words, it is very important to make a bit change at a certain moment. This usually happens during the verse change and the kick begins. Or vice versa. The main thing is that the transition should only complement the composition, but in no case spoil it. After that, arrange a part of hi-hats (hi-hats) or percussion (percussion).

Once the beat is ready, create a hip-hop melody. It is also important to choose the right tool. You can use orchestral sounds or synthesizer sounds. When creating music on a computer, VST (Virtual Studio Technology) can be used, which you can choose to suit your taste.

Having at least the skills to play any musical instrument, create a melody. Use sampling when only one part of a sound recording is used, for hip-hop this is a sample (as a separate part or one instrument in a new hip-hop recording). This is usually done using a sampler, which is included in the recording equipment and is part of it, or a special program (FL Studio).

Once the melody and beat are complete, start working on the bass. And to make the track have an interesting sound, add some effects at the end.

The last stage – mastering and mixing – is the most difficult. With the help of mastering, you need to turn your creativity into real art. And with the help of mixing, a set of tracks turns into a complete piece of music and, thereby, completes the creation of a hip-hop minus.

Sources:

• creating rap cons in 2019

The backing track of a song is a phonogram in which the part of one of the instruments or vocals is missing. Backing tracks are widespread because... enable the performer, by turning on such a phonogram, to learn the part of his instrument or sing to it. “Cons” are often used in karaoke, KVN performances, and at various holidays.

Currently, on various websites you can find backing tracks for almost all famous songs. Some of them were recorded in professional studios, and some were created by folk craftsmen who synthesize sound effects on computers.

The largest and most famous sites from which you can: http://a-minus.org/, http://x-minus.org, http://b-track.ru/, etc. They differ from each other only in the interface and the set of tracks available for downloading. There are no problems in downloading the backing track of a song to your computer from one of these resources. You don't even need to register. Using the search system installed on the site, you need to find the required track and download it with one click. At the same time, the site may have several backing tracks of one song, differing in their quality. Therefore, you can choose the most suitable option.

If none of the sites listed above has the backing track you need, or it sounds unsatisfactory, then don’t despair. Continue your search on the Internet, most likely the record you need will be found on some resource. It may be that the song is new and the backing track for it is simply not available yet, then you just need to be patient and wait.

How to make a simple cannon in Minecraft without mods

The simplest and most primitive weapon is designed to shoot dynamite. For construction you will need the following items:

Solid blocks;

Red dust;

Repeaters - 4 pcs.;

Bucket of water;

A button designed to activate the gun.

Initially, find the most optimal place to place the gun, since it will not be portable. Then build a T-shaped foundation using obsidian or other hard blocks. There should be a cavity in the center of the base into which water should be poured.

At the back end of the building, place several restrictor blocks that will help not block the water source when you add dynamite. Install repeat and connect them using red dust. The button will help your cannon detonate successfully.

Place sticks of dynamite, as well as a shell, into the cavity of the gun.

How to build an advanced cannon in Minecraft

A successfully created simple cannon can only be improved to create a more powerful weapon. You will need:

Red dust.

Add a small amount of sand to the structure and pistons, which should be connected with red dust.

How to build a dynamite cannon in Minecraft

You will need:

Obsidian;

Dynamite sticks;

Redstone torch.

The process of creating a dynamite cannon is quite simple and consists of making a column of obsidian 5-10 blocks high and 1 block thick. Create a platform on a column of obsidians on which to place 8 sticks of dynamite and a redstone torch. This operation should be performed in the form of a square, in the center of which there will be a torch.

The principle of operation of this weapon is as follows: 4 pieces come into contact with the torch, then detonate and launch the remaining 4 dynamites at various distances.

Singing is an activity that very, very many citizens love to do, even though some of them simply cannot sing. However, no lack of hearing or voice can reduce a person’s immense love for singing, even if not on the big stage, but at least in the shower or karaoke bar. And it doesn’t matter what emotions the involuntary witnesses of such a gorgeous performance experience, the main thing is that you feel confident and absolutely wonderful. But, in order not to seriously injure the delicate ears of the public relaxing in a karaoke bar, you can rehearse your favorite songs in advance, performing them to a minus soundtrack, which can be made on your own from almost any audio file that contains vocals.

So, if you decide to make a backing track for yourself, it will be useful for you to learn how to remove the voice from the song, leaving only the instrumental accompaniment. First of all, you must make sure that the song recorded on your computer is a stereo file. If the recording is monophonic, then it will be impossible to remove the voice component from it using improvised means. The easiest way to remove vocals from a song is Audacity. It needs to be installed on your computer. This is done very quickly and simply. Since it is a cross-platform program, it works great on a wide variety of operating systems.

Next, you need to open the selected audio file in it and click the arrow pointing down to the right of the track name: a menu should appear in which you should select the “Split stereo track” item. You will see two waveforms, each for a different channel. Select the bottom one, and then click "Invert" in the "Effects" menu. To remove a voice from a song, you need to turn each of both tracks into mono. To do this, use the menu that will appear whenever you click on the above arrow and select “Mono”. The result must be saved as a separate file, and then listen to it: you should get a minus soundtrack.

If you are not satisfied with this method of how to remove a voice from a song, try in the same program, opening a stereo file, entering the “Effects” menu and selecting Vocal Remover. In the window that appears, select the Removal Choice function and the Simple (entire spectrum) item. Click OK and wait a few seconds, after which you can listen to the recording again. However, it is also worth knowing that the voice will not be completely removed, but its volume will decrease quite significantly against the background of the rest of the music, so when you start singing to the resulting minus, extraneous sounds will not bother you.

Another way to remove a voice from a song is the Audition program. You also need to install it on your computer and open the desired composition in it. Just like in the previous program, you will have oscillograms. Using the mouse, you need to select the required area on which you want to remove the voice, then enter the Effects menu, in which select the Filters item, where, in turn, select Center Channel Extractor. A window with settings will appear. In it you will need the Presets function located on the right where you select Vocal Remove and click OK. Now you need to wait a little while the program finishes processing the selected fragment. The phonogram is ready, you can listen to it and save it as a separate file.

Knowing how to remove a voice from a song, you can make a backing track for yourself at any time and amuse yourself and your friends by singing to an almost complete soundtrack. Moreover, Audacity has a feature that allows you to record your own performance. This will allow you to listen to yourself from the outside and finally decide whether it’s time for you to go to the big stage, or whether it’s worth holding off on this idea for now.