Why doesn't my Epson printer print? Why does my printer print with a purple tint?

As a rule, the main problems that a printer user encounters during operation can be solved independently with proper diagnostics. Impressive volume possible problems Related to color rendering, when the printer prints colors incorrectly. This could be printing in one color, most often black or red, or incorrect mixing or confusion of colors. Sometimes the causes of problems lie not only in printer operating errors, but also in low-quality consumables, so you should be careful when choosing the right ink.

Possible color rendering problems

There are several common situations that cause problems with adequate color transfer to paper.

• The printer prints in one color.

The essence of the problem is that the cartridges of a standard 4-color printer are divided into two blocks: black and color. That is, one cartridge contains black color, and the other contains the other three colors, cian (cyan), yellow (yellow), magenta (magenta). During the printing process, colors are mixed with each other, creating all the necessary shades. When a problem occurs, the device prints in only one color, ignoring all others. For example, users may ask why the printer prints in red, or mixes colors together to print only pink or only green. This occurs because the cartridges for other colors may be clogged. Also, working with one color is possible if the cartridges are filled incorrectly, the print head is clogged, or the jumpers between the cartridge capacities are damaged.

• The printer is mixing up the colors.

This problem most often occurs in earlier device models due to the characteristics of the print head or the installation of non-original cartridges or CISS. When the printer is idle, the print head moves to a position that prevents air from reaching the nozzles to prevent the ink from drying out. During this time, the ink present in the nozzles enters the print head, and during printing, the colors may mix or change over a number of prints.

• The printer does not print one or more colors.

Most often, such problems can occur after the device has been idle for a long time due to drying or thickening of the ink. It is also possible that the print head may become airy after replacing one of the cartridges, or the printer may not correctly perceive cartridges from different manufacturers.

• The printer only prints in black.

At correct installation and full cartridges, the printer can only print in black. This problem often occurs at the beginning of use, when the default Color setting in the printer driver is set to black.

Possible troubleshooting solutions

Ways to solve the problem of why the printer prints in one color (epson) are quite simple and anyone can do it. First of all, you should clean the cartridges. With frequent refills, ink residue can accumulate as it is not used. To completely remove ink residues, you can use a cartridge holder or special latches that are used when transporting them. If these steps are ineffective, you can clean the cartridges with hot water.

If the printer prints the wrong colors, using identical cartridges and installing appropriate color profiles for them will help. It is important to use cartridges from the same set from the same manufacturer, since cartridges for the same printer are from different companies may differ significantly in design. In case of problems with the print head, cleaning it will help so that all the air escapes through special holes. First of all, it is necessary to perform a nozzle test, and then, based on the test results, determine the need to clean the head or replace it consumables. The same sequence of actions applies when the printer ignores one or more colors. If the printer is printing the wrong colors, it may also mean that the cartridges are low on ink. Sometimes the printer does not print specific color, even if there is ink left in the cartridge, but its level is below the minimum level. In this case, you need to refill the cartridge or replace it with a new one.

To install color printing By default, you need to select the desired tab in the driver properties and change the Color value from black to color.

You can usually fix most problems with your printer printing a different color on your own. Otherwise you need to contact service center for more serious diagnostics.

Among all possible reasons related to problems with the printing system - one of the most unpleasant moments is when, when printing documents or images, one color is not printed. Another symptom of a problem of this nature may be a situation in which colors are greatly distorted.

Why is this happening? There may be several reasons, but most often there is one - one of the cartridges of the printing device has run out of ink. Sometimes the problem lies in the print head; it can simply become clogged. In addition to running out of ink, the problem may be that the cartridge is not refilled correctly.

You may have run out of paint in one of the colors. the printer should signal this. The lights on the printer or a window on the computer monitor should notify you of this. If there is ink, the cartridges are not yet empty, then the print head may be clogged or dry.

It is necessary to clean the printer's print head. To do this, in your printer settings, you need to find the “print head cleaning” item in the service section and carry out the cleaning procedure. Perhaps even several times.

But if the printer for a long time stood without work, the channels could have dried up completely. You need to remove the head from the printer, blow through its channels and soak it in a special liquid. However, there is also a possibility that the paint in the nozzles has dried so much that it will be impossible to restore functionality. In this case, you can try to buy new cartridge(if it comes complete with the print head). If the cartridge and head are sold separately, then most likely the cost of a new print head will be close to the cost of a new printer.

Epson printer does not print one color - some problems

1. The protective film has not been removed from the nozzles ink cartridge. Protective film is present on the cartridge nozzles if you bought a new cartridge or if you brought it in after refilling.
2. The protective film has not been removed laser cartridge. This film is usually found in new HP and Canon cartridges. It prevents toner from getting onto the magnetic roller. When installing a new cartridge (from the box), you must remove it.
3. There is a problem with the printer driver. If you find problems with the printer driver, you need to reinstall it. Go to the control panel, then to printers and faxes.
4. The cartridge is broken. Inkjet printers When a cartridge breaks, they usually give an error and block printing. Laser printers can produce a white sheet if the cartridge is broken. In this case, you can try to remove the cartridge, wipe its contacts with a dry cloth and reinstall it. If the problem persists, you must contact the service center.

Printer problem

If the cause of the white sheet is the printer, then you need to open the cartridge cover, remove and reinstall the cartridge. Check that all covers are properly closed. If the problem persists, you must contact the service center.

Epson printer does not print red color

Doesn't print red? It's simple! Either your CISS is not ready for work (its holes are closed), or its ink plume is crushed. Air may also get in, preventing ink from reaching the cartridge.

Check the ink level if the device does not print pink! There simply may not be enough of them. Or perhaps you haven’t used the printer for a long time, and the ink has dried out.

What to do? There are several options:

• install air filters in the CISS, move it to the working position;
• Place ink containers at the correct level;
• check the location of the ink plume to ensure it is not squashed;
• pump air;
• clean the printing system using the driver;
• make a test print.

Strange spots, all printed with a pink tint. Printed plain text is not perfect, there is a simple explanation for all this that will surprise you.

All you need to do is take a couple of simple tests that will help solve your pink problem.

Why does the printer print pink?

Conventional printing technology processes color in four colors on a page; cyan, magenta, yellow and black. This color model is called CMYK and works by creating different color combinations with four colors to produce best color for printing. At the same time, ink cartridges in inkjet or color laser printer divided into four colors. From time to time one color may run out before another. For example, if you are printing the sea and the sea is pinkish in color after printing, that means your cyan cartridge is running low. If there should be red beach huts in that seaside photo, but now they're an unnatural shade of pink, you've run out of yellow ink. A modern printer will automatically try and make up for the color missing from what is left in the remaining color cartridges, but you will always have a dominant color. In this case, the dominant color is purple.

How to fix the problem?

If you're having trouble achieving accurate colors when printing, there are a few simple tests you can run to determine what you need to do to correct the problem.

Most likely the problem will be an empty cartridge, so first, you should check your printer's ink levels. You won't need to open the printer to do this, as you just need to access the printer's maintenance utilities. This can be found either through the start menu on your PC or from the navigation screen on the printer's LCD, if it has one. Where this is located depends on the make and model of your printer. After you use the maintenance utilities, you will be able to see which cartridges are low.

If your ink levels look normal but you are still not getting what you need high-quality printing, it may take time to check the test print or check the nozzles. From this, you will be able to determine which color cartridge is causing the problem since the test separates the colors cyan, magenta, and yellow.

It is also necessary to check the nozzles. Checking the nozzles is necessary when you have not printed long time and the cartridges are dry and may be clogging the nozzle. By checking the nozzles, the printer will clean them, freeing it from clogged particles. It is best to check the nozzle last as this process requires large number ink.

With these simple tests you can determine which ink cartridge probably needs replacing and this will in turn help keep your printer in working order.

Dear Igor! For an accurate answer to asked question Many details need to be clarified: how and what kind of ink was refilled, whether the color match of the ink being filled was determined correctly, what condition the cartridge was in before refilling, etc. On at the moment we can only assume the cause of the malfunction.

Most likely the cartridge is simply full of air. Try refilling the cartridge and pumping out the air from the outlet hole in the cartridge (where the cartridge fits onto the print head fitting).

However, I do not rule out the possibility that the red inkjet nozzles are clogged (since other colors appear to be printed). Therefore, you may have to repeat the cleaning procedure.

Let us remind you! The restoration process is very delicate, and if the instructions are not followed or there are mistakes, it will be even worse! Do not attempt to restore cartridges that have clearly expired. this procedure will only help young samples. Never expect full return to print quality. All manipulations should be carried out with only two liquids: distilled water (ordinary water is not suitable), and special liquids (each cartridge has its own), but it is better to use water.

In order not to write a lot, we will divide cartridges into three groups: with an absorbent sponge, with vacuum ink retention, and with a separate head. Let's start in order... If the cartridge with a sponge inside dries out, you should try to soak the sponge. To do this, place the cartridge with nozzles in the distillate for a day. It is important to pour little water so that only the nozzles are immersed in it. Then the cartridge is filled with ink. It doesn't hurt to pump the ink through the suction cup with a syringe, but don't use too much force. Pull the syringe slowly, without sudden jerks, and when the ink begins to come out evenly and in large quantities(no more than 10 ml) it is better to stop the procedure. Before inserting the cartridge into the printer, wipe it clean of any remaining ink, and pay special attention to the electronics contacts. Do 2-3 head cleanings and print a test page. If it was printed normally, then you are lucky, but if the quality is unsatisfactory, then you will have to put up with it: this type cartridges are very difficult to restore.

Air-filled cartridges are more interesting to reanimate, and positive results are more common. First, pour 10 ml of distillate inside and shake, pour out the water. Repeat three times. Place the cartridge with nozzles in the distillate for a day. Again, it is important that only the nozzles are in the water. Then fill the ink, seal the cartridge, and suction the ink through the nozzles. If the suction device is not included in the kit, then do not improvise; it is better to find a device, since it is very easy to damage the nozzles and electronics. Never pump out more than 10 ml of ink. After making sure everything is in order, insert the device into the printer. Do 2-3 head cleanings and print a test page.

And finally, separate print heads. They are, in fact, restored, because if problems arise with the tank, they simply throw it away, because nothing can be done with it. Do not try to immediately apply radical methods to the heads; try performing the software head cleaning procedure implemented by the printer drivers several times. If this does not help, then remove the head (to do this, the printer is disassembled, disassembly instructions specific models can be found on the Internet). Do everything as carefully as possible, and also carefully place the head to soak in water for 1-2 days. Then reassemble the printer and clean the heads. If after 5-10 times there is no result, then relax - it will no longer be there. There are more radical methods, such as cleaning nozzles with ultrasound, but ordinary user They are not available, so we will not describe them. Take the printer to a service center.

Remember, cartridges cannot be restored: those with hardened sponges, damaged electronics, mechanically damaged nozzles, broken seals (cracks, damage to bags), those that are too dry or clogged.

And more! The native software that comes with the printer has several utilities for checking color settings, ink levels, etc. Check if the red ink has not yet run out, clean the head again with the appropriate utility, most likely the printing surface has dried out. This happens when inkjet printers are rarely used...