• Connection to tp link. Setting up WiFi TP-Link: tips for users. Preparing for setup

    TP-Link is a large manufacturer of a wide variety of network equipment: home wireless routers, Wi-Fi network amplifiers, Wi-Fi adapters and much more. In this article we will take a detailed look at the process of setting up WiFi on TP-Link, step by step and with screenshots.

    Network equipment TP-Link

    To begin with, it’s worth saying a few words about the equipment manufacturer TP-Link itself. This large company has been a supplier of modern equipment for Internet access for many years. Many users have routers and adapters from this company at home, so the question often arises about setting up WiFi on TP Link, how to do it correctly and achieve maximum Internet performance on wireless devices.

    The manufacturer offers a wide range of equipment: home routers, Wi-Fi amplifiers, ADSL and 3G modems, Wi-Fi adapters, smart home equipment, access points, antennas, etc. For the correct operation of these devices, they require proper configuration.

    Connecting a TP-Link home router

    In order to configure WiFi on TP Link we need the following:

    • the router itself;
    • computer or laptop (a device that can be connected using an Ethernet cable);
    • twisted pair;
    • network cable through which the provider provides access to the Internet.

    Connect the router to the power supply, make sure that the indicators on it are lit (the fact that the device is correctly connected to the network is indicated by a steady glow of the POWER indicator).

    Then connect the WAN cable entering the apartment from the outside to the connector (this is necessary so that after configuration there is access to the network). The ports on the router look like the photo below. The connector for the cable from the provider is highlighted in a different color.

    Connect one end of the twisted pair to any of the LAN connectors (yellow), and the other to the computer’s network card connector. The WAN and LAN 1 indicators on the router should be lit.

    Configuration via WEB interface

    After this, you need to enter the interface to configure WiFi on. To do this, you need to enter the IP address of the router in the address bar of any browser. Typically this is 192.168.1.1 or 192.168.0.1. If none of these addresses are suitable, the correct one can be found on the information sticker on the router case.

    After this, in the authorization field that opens, you need to enter the login admin and exactly the same password. Again, if the data is not accepted, you need to check the sticker. If no entered values ​​are accepted, it is recommended to reset the router settings by pressing the Reset button.

    So, after this you will be taken to the router configuration interface. He looks like this.

    It is worth noting that setting up WiFi on TP Link is convenient because most models have a standardized web interface that is intuitive even for an inexperienced user, and the official website offers emulators for all popular equipment models.

    To set up a wireless network, select Wireless in the menu on the left, and Wireless Settings in the submenu that opens.

    The following window will open.

    This is where we will set the basic settings of the access point.

    1. In the SSID section you need to enter the name (name) of your wireless home network. It may consist of Latin letters and numbers.
    2. Choose the region you are in.
    3. In the Channel line, you can leave the value “Auto”, then the router will select the most unloaded channel every time you reboot, or you can select any other by analyzing the networks in your home using special utilities. It is important to note that if you use Apple devices, you need to select channels in the range from 1 to 11.
    4. Leave the rest of the settings as default and click the Save button.

    The basic wireless network settings are now complete.

    Setting up a password

    Go to the Wireless Security section, where you can set a password for the network. To do this, just check the box WPA-PSK/WPA2-PSK and enter the desired password. For security, it is better to use the most complex combinations of lowercase and uppercase Latin letters and numbers.

    The basic setup of the TP Link WR841N WiFi router can now be considered complete. Advanced users can use the official emulator on the manufacturer's website to configure advanced settings to suit their needs.

    Setting up a wireless network on an ADSL modem from TP-Link

    Many Internet users from providers such as Rostelecom connect using ADSL technology. Modern modems using this type of connection can distribute a wireless network. Let's figure out how to configure WiFi on TP Link TD W8961ND.

    Since the setup is performed using a telephone cable, make sure it is connected to the appropriate connector on the back of the router. This is the gray connector and is a different shape from the four LAN connectors highlighted in yellow. This is what it looks like.

    Logging into the interface is performed in a manner similar to that described in the previous paragraph, but visually the settings screen is slightly different.

    In the menu at the top, select the Interface Setup section and go to the Wireless tab. Here's what you'll see:

    Here all settings are located on one screen. We are interested in the following points:

    1. Make sure there is a dot next to Access Point (Activated).
    2. From the list of countries, select Russia and set the desired wireless network channel. It is not necessary to change the remaining settings in this block.
    3. Next, go to the bottom of the page and enter the desired network name in the SSID line, enter WPA/WPA2-PSK in the Authentification Type field, TKIP should be set in Encryption.
    4. Enter the password at your discretion.

    As you can see, setting up WiFi on the TP Link W8961ND is not difficult at all. After all the data has been entered, restart the router, find your network in the list of available ones on wireless devices and start using the Internet.

    Features of settings for Rostelecom

    In some regions, TP Link devices are provided by the largest Russian provider, Rostelecom. In addition, modems and routers from this company can be purchased independently.

    Setting up TP Link WiFi routers under Rostelecom is practically no different from the settings for other providers.

    If you are using an ADSL modem, then enter the data in the same way as the previous point. In addition to setting up a wireless network, you may need to set the connection type on the modem. As a rule, Rostelecom uses a PPPoE connection, the login and password for which can be clarified in the technical service.

    When connecting using GPON or Docsis technologies, the router is used as an auxiliary device. The connection itself is made through the terminal or In these cases, the router will be connected using an additional network cable to the main network device.

    In order to configure WiFi on TP Link for Rostelecom, you need to go to the web interface in the same way and enter the desired data. Typically, the provider does not place any restrictions on the operation of the wireless network.

    Tip: if the setup was performed by a specialist when connecting to the service, it is recommended to change the default network name and password, because devices with default data are most often hacked.

    Setting up a wireless extender

    A Wi-Fi network amplifier, or repeater, is a device that allows you to use wireless devices over a much wider area. It is connected in cases where the area of ​​the apartment exceeds the coverage area of ​​the router.

    Let's look at how to configure the WiFi TP Link amplifier.

    When a device connects for the first time, a basic setup is performed so that the device knows which router it will interact with in the future.

    1. Connect the repeater to your computer using a network cable.
    2. In the browser, enter the IP address 192.168.0.254, log in using the standard login and password pair.
    3. You will be taken to the Quick Settings menu. Follow the recommendations on the screen. As soon as you select a region, a search for available wireless networks will begin. Select yours and click "Next".
    4. Enter the SSID and password for your network, go to the next screen, make sure the settings you entered are correct, and complete the wizard.

    This is what the TP Link repeater quick setup screen looks like.

    Through the same web interface, after completing the basic settings, you can configure other parameters of the wireless network, for example, set the encryption type and the network key.

    Connecting a repeater

    After WiFi TP Link is completed, plug the repeater into an electrical outlet in the place where the signal from the main router is decreasing, make sure that the indicator on it is lit.

    Press the WPS button on the main router, and within 30 seconds after that, press the large button with a lock icon on the repeater. An indicator will appear showing the wireless network strength. Two or three bars on it indicate that Wi-Fi will work at a good level.

    How to choose a Wi-Fi adapter

    Often you need to connect a device that does not have a built-in Wi-Fi module, for example, a desktop computer, via a wireless network. In such cases, special adapters are used to allow such equipment to receive a wireless network signal.

    The range of such devices is very extensive, so depending on the required functionality, you can choose the appropriate adapter.

    If you use a laptop that does not have a built-in Wi-Fi module or this module is damaged, you can use a compact adapter, for example, TP-Link TL-WN725N.

    In cases where you need to work via a wireless network on a desktop computer located far from the Wi-Fi source, it is better to purchase an adapter with an external antenna.

    The Wi-FI adapter can be connected via a USB connector or PCI (internal).

    Step-by-step setup

    Let's look at how to configure the WIFi TP Link adapter below.

    1. First, connect it to your computer using the appropriate connector. If the system unit is located on the floor, it is recommended to use a USB extension cable to position the adapter higher for a better signal.
    2. Next, driver installation is required. It can work automatically - then you will immediately see available Wi-Fi networks, but if the operating system does not load it immediately, you can install it from the disk that comes with the adapter, or download it from the manufacturer’s official website.
    3. If you download the driver yourself, you need to know its version - it is indicated on the package or sticker. There are versions V1 and V2.
    4. Download the driver, run it and follow the instructions on the screen. Just click “Next” several times without changing any settings, and the driver will be installed, after which you will have access to the wireless network.

    By setting up the equipment according to these instructions, you will be able to connect to the Internet anywhere in the apartment without cluttering the space with a large number of wires.

    As you can see, setting up WiFi on TP Link is not very difficult for users. An intuitive interface, publicly available firmware emulators and a large amount of accessible information make this process very convenient for everyone.

    To ensure that your wireless network works properly, we will give you a few recommendations.

    1. No device can operate uninterruptedly for a long time, so it is recommended to reboot the equipment at least once every two to three weeks.
    2. When using a large number of devices connected via Wi-Fi, it is best to use a router that supports the network at a frequency of 5 GHz. It is important to remember that many budget or older smartphones and tablets may not be able to connect on this frequency.
    3. In apartment buildings, the same Wi-Fi network channel can be occupied by a large number of devices. You can analyze the network with special utilities and change the channel in the settings to increase the speed of the Internet over a wireless network.
    4. When giving preference to budget models, you need to remember that they can work very efficiently and stably, but they often maintain a speed lower than what may be stated by your provider. Therefore, when buying a new router, always pay attention to the technical specifications.

    Many users believe that wireless technologies are significantly inferior to a cable network connection, but if you use the technology correctly and follow the basic rules of its operation, you can achieve very good results.

    Conclusion

    It is already very difficult to imagine working on the Internet without the ability to connect devices via a wireless network. In this article, we looked at the basic WiFi settings on TP Link. Our recommendations will allow you to always stay in touch and do your favorite things online.

    Hello! Now we will connect and configure the Tp-link TL-WR841N Wi-Fi router. If you have a TL-WR841ND model, then these instructions will also suit you. Let's look at the entire process of connecting the router, setting up the Internet, Wi-Fi network and setting a password for the Wi-Fi network.

    All this with photos and detailed descriptions. So you shouldn’t have any problems setting up the Tp-link TL-WR841N router. Just follow the instructions.

    A few words about Tp-link TL-WR841N (TL-WR841ND). A very successful Wi-Fi router model that is very popular. Indeed, a successful model, with an excellent price/quality ratio. It seems to me that for home use, an undemanding user cannot find a better router. I myself, in practice, tested the operation of the Tp-link TL-WR841N. It has been working perfectly for more than five years, distributing Wi-Fi to a large number of devices. It works very stably, I don’t even remember that the Internet was lost on it or something else. You can read more about Tp-link TL-WR841N at. There you will find a short review and my review.

    If you have already purchased this router, then it’s time to move on to configuration. Let's do everything according to this scheme:

    • Connecting the Tp-link TL-WR841N router.
    • Setting up an Internet connection (WAN).
    • Setting up a Wi-Fi network on the TL-WR841N.
    • Setting a password to protect your Wi-Fi network.
    • Changing the admin password, which protects the router settings.

    Connection Tp-link TL-WR841N

    Connect the power adapter to the router and plug it into a power outlet. If the indicators on the router do not light up, then turn on the power using the button located on the rear panel.

    If you configure the router via cable (which comes included), having connected it to a computer or laptop, then take a network cable and connect the computer to the router. On the router, connect the cable to the LAN connector (one of 4):

    We connect the second end of the network cable on the computer to the network card connector:

    Connecting and setting up a Wi-Fi network

    If you want to configure the router via Wi-Fi, and not by connecting via cable, then just connect to the Wi-Fi network, which will appear immediately after turning on the power on the Tp-link TL-WR841N router. The network will have a standard name (something like this: "TP-LINK_084313"), and will not be protected.

    You can even connect to this network from a tablet or phone and set up a router without a computer.

    You probably found a disk included with the TL-WR841N. There is a utility for configuring the router. So, we will configure without a disk, through the router’s web interface. We will not need the disk in this instruction. If you want to configure via the utility from the disk, you can do this according to the instructions.

    The Internet must be connected to the router. And your computer, tablet, laptop, etc. must be connected to Tp-link via cable or Wi-Fi. The router's power must be turned on. If everything is ready, then you can proceed to setup.

    The router settings will open.

    And if the router has already connected to the provider and is distributing the Internet, then you can continue setting up.

    Setting up a Wi-Fi network and setting a password on the Tp-link TL-WR841N router

    To configure Wi-Fi, you need to open the tab on the settings page Wireless - Wireless Settings. On this page we need in the field Wireless Network Name come up with and write down a name for your Wi-Fi network, and in the drop-down menu Region select the country where you live. Leave the rest of the settings as they are in the screenshot below.

    To protect our wireless network with a password, go to the tab Wireless - Wireless Security. There you need to select the security type WPA/WPA2 - Personal (Recommended).

    In the field PSK Password create and write down a password that will protect your Wi-Fi network. You can read more about setting a password on the TL-WR841N router in the article.

    Save the settings by clicking the button Save.

    Change admin password. Protecting your router settings

    I already wrote in a separate article about how to do this in the router settings. Let's, while we are in the settings of the Tp-link TL-WR841N, immediately change the password that is used to protect the settings page. So that everyone who connects to your network will not be able to go into the router settings and change them.

    Open the tab System Tools - Password. Enter your old username and password first (default - admin). Then enter your new username below (you can leave admin) and a new password. I advise you to write down this password somewhere so you don’t forget. Save the settings with the button Save.

    That's all, the configuration of the Tp-link TL-WR841N router is complete. All that remains is to reboot the router. This can be done by turning off/on the power, or from the settings. On the tab System Tools - Reboot, you need to click on the Reboot button.

    After setup and reboot, a Wi-Fi network will appear with the name that we set during the setup process. And to connect to a wireless network, use the password that we also set when setting up the router.

    You can already connect your devices to the router. If you set up via cable, but want to connect via Wi-Fi, then you can disconnect the laptop from the router and connect via a wireless network.

    You can leave your feedback and questions in the comments!

    In the 21st century, people are unable to live without the Internet. However, compared to the beginning of the century, when all devices were connected via wires, connections are now made through wireless routers. Let's look at the features of setting up a TP-Link router. Models from this company are popular for their price-quality ratio. All actions are successfully applied to almost all TP-Link routers.

    Regardless of the model, the TP-Link router and its configuration do not cause problems even for inexperienced users. In most ratings, the Chinese company's routers are leaders in various categories, delivering better performance than their competitors.

    Appearance

    Visually “Wi-Fi » TP-Link routers are attractive and have rounded shapes. The plastic is glossy, which is a slight minus due to its dirtiness. The delivery set is standard and includes:

    • power adapter;
    • short network cable;
    • disk with software;
    • manual and warranty.

    Indicator lights are placed on the top part. Due to the large number of holes, the router does not heat up. At the bottom there are rubber feet, thanks to which it does not slip, and a sticker with data, ranging from the standard password to the login address to a special administration page. There are ports and buttons at the back. And antennas are placed on top.

    Where to install

    The question is often asked about where to install the TP-Link modem. The main thing is that you cannot install it on devices whose operating frequencies are 2.4 and 5 GHz. It is better to attach it to the wall, hanging it by special devices, or install it on an open shelf in a table or closet away from mirrors. Fix the antennas in a vertical position.

    Connection and preparation for work

    The process of connecting TP-Link to a computer or laptop will not cause much trouble. To do this, you need to insert the cable provided by your provider into the connector on the back of the device. Then plug the power adapter into an outlet. In about a minute, the router will be ready to use. This will be “told” by the light indication that has stopped changing.

    How to properly configure a TP-Link router

    Setting up wi-fi on any TP-Link router is unified and does not cause any problems. Moreover, you can do both a quick setup of the TP-Link router and a more thorough, manual method.

    Automatic setup

    In order to understand how to quickly set up a TP-Link router, you should go to the IP address indicated on the sticker on the bottom of the device. Typically this is 192.168.0.1. The login and password fields will open. The standard username is admin, the password is the same – admin. Then go to the “Quick Setup” tab. After that, click “Next”, select the country, provider, connection type.

    Connecting to the Internet manually

    It's a little more difficult to do everything manually. The IP address, gateway, subnet mask and other precise settings for the TP-Link modem, ensuring its correct operation, should be found out from the provider, select the desired connection type and then fill out all the fields yourself to gain access to the Internet.

    "Dom.ru"

    For example, let's look at how a TP-Link router connects to the network of a provider called Dom.ru. In the past, you had to find out the mac address, but now this archaic method does not exist. You need to open the “Network” section, then go to the WAN submenu.

    In the “Username” and “Password” fields, indicate the login and password that are specified in the concluded agreement. Select the Always Active checkbox. As a result, after saving, the Internet should work.

    Rostelecom

    First, open the “Network” section and go to the WAN submenu. Then select the connection type, most often PPPoE, but the settings are identical for other types. Enter in the login and password fields the information specified in the concluded agreement. Check the box “Always active”.

    "Beeline"

    When setting up TP-Link for Beeline, go to the administration page at 192.168.0.1 and then to the “Network” item. The WAN Connection Type field is set to L2TP/Russia L2TP, and, accordingly, the login and password issued by the provider when concluding the contract are written in the required fields. You should check the box next to “Automatic connection”. In general, the settings make it easy to connect to a TP-Link router, regardless of the provider.

    Wireless network

    The wireless network for TP-Link is configured on the Wireless – Wireless Settings tab. In the special Basing settings field, you can set the name of the network that you created yourself. By logging into Wireless Security, you configure connection security using a password and encryption.

    Configuration in repeater, amplifier, adapter or access point mode

    To configure TP-Link in repeater (repeater), amplifier, adapter or access point mode, you should go to the wireless network settings field, where in the “Operation Mode” select the required option from the drop-down list.

    IPTV

    Modern TP-Link routers support IPTV - interactive television. It is possible to set up and watch IPTV over Wi-Fi on any device. If there is a special set-top box, it is recommended to allocate the required LAN port for it, working as a bridge. All this is done in the “Network” tab, where you need to go to IPTV.

    Individual user connection settings

    There are no options for adding additional users with individual settings through the web interface of the equipment for TP-Link models.

    Dynamic DNS

    To enable dynamic DNS in TP-Link, you need to go to the DDNS tab. If you are registered on the resources presented in the drop-down menu, enter your login, password and domain, check the “Enable DDNS” checkbox and click “Next”. If the transition is not possible, click on the hyperlink and register.

    Security Settings

    To protect your data, you should change the password set by the manufacturer. To do this, find the Password field and enter a new password. In the “Protection” tab, subsection “Configuring basic protection”, check the box to enable the SPI firewall. You can install specific computers from which the interface is locally controlled. To do this, in the “Protection” tab, go to the “Local Management” submenu, where you enter the MAC addresses of computers that are allowed access to the setup interface with administrator rights.

    To exclude the possibility of remote access, you should go to the “Remote control” sub-item and set its IP address: 0.0.0.0. Any other IP address is a potential vulnerability; for example, entering 255.255.255.255 in the field opens remote access to any other computer.

    It is necessary to update the software on a regular basis, because the manufacturing company regularly releases “patches” that protect the device from being hacked by intruders.

    Parental Controls

    On the router page, select the appropriate tab. You should check the box next to “Enable parental controls.” After this, enter the MAC address of the host computer in the special field. It’s easy to copy the address of the PC on which the settings are made: by pressing one button.

    Below are the MAC addresses of all monitored computers. The schedule can be configured: day, time of action. A “white” list of sites is formed for unhindered visiting.

    Changing the function of the buttons

    There is no standard mechanism for redefining buttons in the configuration interface for TP-Link models.

    Setting up a torrent client

    There are no standard ways to configure torrent clients on the TP-Link interface page. However, third-party firmware dd-wrt is installed, which turns almost any router with a USB port into a torrent client. It is also possible, without using computer resources, to download torrent files to a USB device connected to the router.

    You should go to the official website of the firmware developer dd-wrt. In the field that opens, check the compatibility of the specific router model with the firmware. If successful, select and download one of the versions. Be sure to make a “backup” of the router’s factory firmware, and then install dd-wrt via a patch cord. Then you will need to download the Optoware program and install it on a Linux-formatted USB drive. During the setup process, the Transmission utility will be installed - an analogue of a torrent client. Through the Transmission Remote utility, it is remotely controlled, during which torrents are added or removed, speed is limited, etc.

    It is worth noting the low value of this procedure. Firstly, installing third-party firmware voids the manufacturer's warranty on the router. Secondly, it is objectively much simpler and more convenient to use a computer as a torrent client, and specific configuration of a router is quite labor-intensive even for professionals.

    Setting up the printer

    As with all modern modems, the router settings include a print server function. Of course, this is done using standard Windows 7, 8, 10 tools, but it is much easier to use the specialized TP-Link USB Printer Controller utility, the installation file of which is located on the official TP-Link website.

    Setting up DLNA on the router

    Since 2011, after the May firmware update for TP-Link routers, support for the “Media Server” function appeared in the settings menu. Using a standard player or even a regular game console, shared access to media files is provided. To do this, you need to go to the modem settings, select “USB Settings”, and then “Media Server”. After that - shared folders. After starting the player, it will find the created media server.

    VPN service

    The question is how to establish a VPN connection between two modems. For the first, the router settings are set to “Server” mode, and for the second, accordingly, to “Client”.

    To configure the “Server”, go to the VPN tab, select the Ip Address Pool field, where the necessary addresses are added using the Add button. In the L2TP/PPTP Tunnel tab, the PPTP protocol is set, and the Mode is set to Server mode. The new login and password are filled in in a special field. Tunnel is set to LAN-to-LAN. After this, all that remains is to confirm the activation.

    The “Client” setting is identical, except that the Mode field is set to Client mode.

    Possible malfunctions and ways to eliminate them

    If the router does not respond to connection to the power supply, the indicators do not light up, you should check the power button. The router may have burned out.

    If the router does not distribute the Internet, there are options:

    1. Due to problems on the part of the provider. In this case, you should either just wait a while or call technical support. If experts say that everything is fine on their end, then the problem is related to the router. It's worth trying to reboot the router itself. In the vast majority of cases this will be the solution.
    2. There were some problems with the settings. The easiest way is to reset to factory settings using the Reset button.

    How to connect to a TP-Link router to update the firmware

    The software is being improved, patches, improvements, and additional functions are released. Accordingly, the question arises of how to install the current one. You can do this in two ways:

    Via web interface

    Go to the website, select the version you are interested in and download. To avoid losing your settings, you only need to update the firmware using a network cable via a computer. The WAN cable is disconnected - from the provider - and the router is connected to the computer via a patch cord. And then proceed according to the instructions of the installation program.

    Via mobile application

    Tp-Link has created an application for smartphones and tablets called TP-Link Tether. Operates on Android and iOS. Using this program, you manage, configure and update your Wi-Fi router. Everything is intuitive, as in the vast majority of modern applications. Just go to the page, select the router, go to the system settings and click “Update”.

    Resetting the TP-Link router settings to factory settings

    Sometimes people make mistakes, don’t know how the router should be connected, forget to write down personal data, or accidentally delete something. The question arises, how to reconfigure the router. You should use reset settings to default. Do this either through the “System Tools” tab or by clicking the WPS|Reset button. The parameters will be reset to the original factory settings.

    Conclusion

    It is worth noting that questions about how to connect a TP-Link router and then configure it should not cause problems. It is enough to understand the general principle of operation, then, regardless of the device, you will be able to correctly connect the network and use the Internet. The example considered is also suitable for configuring routers from other manufacturers, because the differences lie in the details.

    Pros

    The advantages of TP-Link routers are:

    • Powerful signal that easily covers a large area.
    • Availability of WPS button.
    • Low heat.
    • Reliability.

    Cons

    The disadvantages, first of all, include the not very attractive design of the administrator interface; competing companies have a more stylish design. Also, most routers have crevices that make it difficult to remove dust. But the disadvantages, of course, are unable to “outweigh” the advantages.

    Hello! Very often they ask how to connect the router? So we bought a router, brought it home, and how to connect it, and what to do with it next, so that it would distribute the Internet via Wi-Fi and cable. In this article we will talk specifically about TP-Link routers. I’ll tell you in detail and even take a photo of the TP-Link connection. Where and what cable to connect, how to connect the router to the provider, computer, modem, etc.

    In fact, there is nothing complicated about it. You just need a little time and patience :) After purchasing any router, in our case this is a TP-Link device, you will have to connect and configure it correctly. If you connect incorrectly, you will not be able to configure it. The setup process itself is a topic for another article, or for instructions on a specific model. Well, in this article we will analyze in detail the process of connecting a TP-Link router.

    The article is suitable for all models: TL-WR940N, TL-WR740N, TL-WR841N, TL-WR842ND, TL-WA701ND, TL-WR743ND, etc. I will show it using the TL-MR3220 as an example. I would like to show you how to connect (it's more popular), but now I only have the TL-MR3220 at hand. Well, okay, they are practically no different.

    Connecting a computer to TP-Link via a network cable

    First of all, we need to connect the power adapter to the router. Just plug it into the POWER connector. You definitely won’t miss there :) Well, plug it into the mains. If the indicators on the router do not light up, then check to see if it has a power button and is turned off.

    Further, if you configure (and/or use the Internet via cable) router from a computer? or laptop, then take the network cable that comes with the router and connect one end of the cable to your computer's network card, and the second to the LAN connector of the router. On TP-Link, LAN connectors are usually yellow and there are usually 4 of them.

    We connect the TP-Link router to the Internet provider or modem

    Everything is clear here. So that the router can distribute the Internet (and this is his main task), you need to connect to the Internet. Most likely, you have a regular network cable installed in your apartment, or your Internet is connected to an ADSL modem.

    We need to connect cable from the Internet provider to the WAN connector TP-Link router. The WAN connector is usually blue. Or, connect the cable from the modem to the WAN connector (for connection you can use the cable that comes with the router).

    This one looks something like this:

    That's all, the Internet is connected, and you can start setting up the router. Go to the settings of your TP-Link (see) and configure the router. You can set it up according to the instructions using the example. The setup will most likely be the same.

    It may also happen that immediately after connecting the router, the Internet will work on your computer and other devices that you connect. This is possible if your provider uses a Dynamic IP connection type, or you have a modem connection. In any case, you will need and.

    It seems like I haven't forgotten anything. As you can see, the instructions are simple and clear, anyone can connect. If something doesn’t work out, write in the comments, we’ll figure it out.

    Modern mobile devices are no longer solely a means of communication; most of them are multifunctional devices that can connect to the Internet using a built-in Wi-Fi module. In enclosed spaces, a wireless connection to the global Internet is provided through routers.

    A good solution for obtaining high-speed Internet with a wide range is TP-Link Wi-Fi routers. They are easy to use and allow you to get rid of unnecessary wires in the house, providing access to the Internet to several mobile devices at once. But to do this, you need to know about the rules for using the device; it is possible to connect a TP-Link Wi-Fi router yourself, you just need to use our step-by-step instructions. In this article we will talk about how to properly connect the router to a PC and then configure it.

    How to connect to PC?

    After purchasing a TP-Link modem, you need to open the package and check the kit for compliance with the description in the documentation. In addition to the device itself, the box should contain a power supply, cables, software disk and instructions.

    Once you have ensured that the device is fully equipped, you should select a suitable location for its installation. In any case, it should be close to the computer, since the LAN cable is short. If necessary, you will have to buy an additional long cord. In principle, this is not a problem, because It is inexpensive and is sold at every electrical and accessories outlet.

    Before connecting the router, it is important to familiarize yourself with its connectors and buttons. There are several of them:

    1. power button;
    2. connector for connecting the power cable;
    3. WAN connector is designed to connect the router to the Internet;
    4. LAN connectors – there are several of them (mostly 4) and are designed for connecting computers via a network cable;
    5. off/on QSS options button;
    6. button designed to reset settings.

    Once you understand the purpose of the connectors, you should connect one end of the power supply to the router, and the other to a power outlet. The Internet cable provided by the provider is inserted into the WAN socket (i.e., Internet access is provided). Typically, the WAN connector on the device is highlighted in blue. One end of the LAN cable is connected to the router (you can use any of the four ports), the other to the corresponding socket on the computer.

    Settings

    Even if we are dealing with a completely new TP-Link router purchased in a store (where it can be tested by the store’s employees), experts advise first resetting the installation to factory settings.

    After the reboot, you can proceed to step-by-step configuration of the router. To do this, you need to open a browser on your personal computer and enter the numbers 192.168.0.1 in the address bar. or 192.168.1.1 (selection based on the firmware version) and press “Enter”. Next, the “Setup Wizard” page will open.

    First, you need to write your login and password (admin) in the appropriate fields.

    It is better to change the password, which will protect the TP-Link router from unwanted use of your Internet by your neighbors (especially if you live in an apartment building).

    In the case when the provider uses Dynamic IP, or the router is connected via a modem, then after connecting it, the Internet on the computer and other devices can start working immediately. But even in this case, you will have to configure Wi-Fi and install a new secret code.

    To do this, you need to enter the tab, System Tools, click on it, and click on Password. In the fields of the old password and login you need to enter admin, and enter the new password and login in the appropriate fields (New Password and User Name). It is not necessary to change the User Name, only the password is important. After entering new data, you must confirm the actions by clicking on Confirm New Password. Next, to save the updates, click on Save.

    As experts advise, on the settings page you should update the firmware by downloading the latest version. This is done using System Tools, by clicking on it, go to Firmware Upgrade. Next → “Overview” → open the downloaded firmware file for the TP-Link router you are using, downloaded from tp-linkru.com. Then you need to go to Upgrade. Please note that licensed firmware can be downloaded for free only from official sources.

    The next step is setting up the Internet in the TP-Link router. This is done using the Network and WAN tabs. First you should select the type of network; information about this can be obtained using the Hot-line provider whose Internet you use. Selecting the network type requires saving (click on Save).

    Setting up a Wi-Fi network

    To start setting up Wi-Fi, go to the Wireless tab. Enter the name of the network in the Wireless Network Name column. Additionally, you can enter your country in the box below. All changes made must be saved by clicking the Save button.

    To protect your wireless connection from unauthorized access, you need to go to the Wireless Security system and come up with a difficult, but memorable secret word for you, and enter it in the PSK Password field. After saving all changes, the device should be rebooted by clicking the Reboot button in System Tools. This action, like the others, requires confirmation.

    And so, connecting a TP-Link Wi-Fi router consists of the following basic steps:

    • Enter the “Setup Wizard” tab;
    • Change password;
    • Firmware update;
    • Network selection;
    • Setting up Wi-Fi;

    Perhaps video instructions are more convenient for you:

    By completing all the above steps, you can easily configure the router yourself, thereby saving time and money on the services of a specialist.

    Read more: