• The Imac plays quietly through the headphone jack. Reasons why there is no sound on MacBook Pro and Air and what to do. There is no sound - reasons

    A faulty audio jack is a common reason why sound does not work on a MacBook. Most often, the breakdown is caused by the careless attitude of the owners themselves to the gadget. If you disconnect a peripheral device by pulling the cord, sooner or later the integrity of the connectors will be compromised. The audio output will also be damaged if moisture gets on it, which causes oxidation of the metal parts of the element.

    In addition to mechanical influences, software errors that you can fix yourself can cause a lack of sound. Sometimes there is no sound in a certain program, or it is missing only from the speakers or headphones. You can accurately and quickly determine the cause of the malfunction at a service center by diagnosing your computer.

    Why doesn't sound work on MacBook?

    The following factors can cause sound loss on a laptop:

    • incorrect system configuration resulting from an accidental failure or incorrect reinstallation;
    • the version installed is older than the operating system released with the device, the latest updates are missing or they are installed incorrectly;
    • if the sound is played only through headphones, then the reason for the silence is probably a speaker that is damaged due to damage or water ingress, which must be replaced;
    • The audio jack is broken due to natural wear and tear or rough handling;
    • After water got in, the sound card failed.

    Repairing or replacing a connector or board at home is problematic. To replace a part you will need experience, deep knowledge of technology, and special tools. Even if you have a tool, it will be difficult to replace a faulty component due to the close arrangement of the elements inside the device. Amateurish repairs usually lead to expensive resuscitation of the MacBook in the workshop.

    If you are sure that the sound on your MacBook disappeared due to incorrect settings, then you can restore it by doing the following:

    • After turning off external devices, you should look for built-in speakers in the System Preferences in the Sound panel. If they are displayed, check that the checkbox is unchecked and that the volume level is not at zero.
    • Update the system and reinstall the drivers.
    • After going into the settings, check the output to the speakers and headphones.

    If, after taking the measures, your computer is still silent, then it should be taken to a service center.

    Where to go when there is no sound on a MacBook

    Engineers and programmers of the DrMac service center will take care of your MacBook Air and return it to its former sound in the shortest possible time. Before starting repairs, the technician conducts a comprehensive diagnosis that will identify the defect that caused the loss of sound, then:

    • will inform you of the optimal repair plan, cost and repair time;
    • disassemble the device and install a new element;
    • will test the laptop;
    • will provide a guarantee for the replaced spare part and for the work performed.

    Cooperation with us is beneficial for many reasons:

    • we guarantee that all replaced components are of original origin;
    • repairs will take minimal time, since we employ specialists who know all the intricacies of laptop repair, and having our own warehouse allows you to quickly find a replacement part;
    • To deliver a broken computer to a workshop and a repaired one to your home or office, you can use a free courier service;
    • current promotions help make repairs much cheaper;
    • We work not only with individuals, but also with legal entities, we accept applications from schools and enterprises.

    You can place an order by filling out an application on the website or by calling. Our specialists will fix the breakdown, no matter how complex it turns out to be.

    Everyone may experience a situation when, waking up in the morning or coming home from work in the evening, you turn on your wonderful MacBook, but it does not please you with its wonderful sounds, but only displays a gray window in which it is written that there is no sound. And the equipment does not react in any way to adjusting the sound.

    In this case, before you run to the service center and shake your warranty card or your money there, you should try several options for solving this problem. After all, maybe everything is not as serious as you initially thought. Especially if when you turn on your Mac, a welcome sound is played.

    So, here are a few solutions to the problem of missing sound that you can do yourself:

    • 1) First, try a simple maneuver, just insert and remove your original Apple headphones. Maybe your contacts are simply blocked.
    • 2) Another simple way is to take a toothpick and lightly touch the walls of the connector that is flashing red.
    • 3) Try using safe mode boot. While booting your Mac, hold down the Shift key.
    • 4) Delete the BazelServices. Then restart your laptop.
    • 5) One of the least favorite methods among Apple users is resetting PRAM or NVRAM memory. Turn off your laptop. Hold down the Option + Command + R + P keys and do not release the next time you turn it on. We wait until it reboots twice. After this operation, you will lose certain settings, such as screen resolution, speaker volume, time zone, and boot volume selection.
    • 6) The last method is to restore access rights. Hold the Alt button while rebooting, go to Disk Utility in the menu and select restore access rights.

    Troubleshooting sound problems in a service center

    If none of the above options suits you, then perhaps you should think about a service center. You will probably have to spend a little money on this matter, but at least they will tell you in detail the reason for the loss of sound and fix it in a short time. But, as a rule, the loss of sound can be solved on your own, through simple operations.

    Any digital technology is subject to malfunctions. This problem has not escaped Apple devices. A common complaint is that the sound does not work on a MacBook.

    The malfunction may lie in both the MacBook hardware and software. The average user is quite capable of configuring the software himself, using the appropriate manuals. But if the reason is the computer’s hardware, then this cannot be dealt with without the help of a qualified technician.

    If you notice there is no sound signal on your device, find out to what extent this problem extends. Check your speakers and headphones separately. It happens that sometimes the sound disappears in certain programs. This problem can be solved by simply setting up the software. But if there is no sound at all, then there are several factors that could influence this.

    There is no sound - reasons.

    The most common reasons:

    • Incorrect system settings. They could simply have gone wrong, or an error was made during the initial settings;
    • Outdated version of the system. MacBooks are released with a pre-installed operating system, information about which is recorded on the computer. If you install an OS version older than it was originally, the device will not function correctly;
    • Lack of sound card driver updates;
    • If the sound signal coming from the headphones is normal, then the speaker is faulty. There are several reasons for this: water ingress, blockage, mechanical damage;
    • It happens that the speaker is working, but the headphones are silent. The external device itself may be damaged. Or the headphone jack is damaged;
    • The sound card has failed. The main reason is water ingress. Then you need to quickly seek qualified help.

    We fix problems.

    Setup. Before doing this, you should turn off any connected external audio devices. System settings will be required. To use them, you need to click on the Apple icon. Select the “Sound” section. There you will need the “Exit” item. Go to “Built-in speakers”. Here you can see the following picture - the built-in speakers are available for selection, but are not activated. Let's turn them on. If there is a checkmark next to “Mute sound”, uncheck it.

    Even Mac computers can experience audio problems from time to time. The problem can manifest itself in different ways: the sound may be interrupted, looped, or have background noise. In most cases, restarting the operating system will eliminate errors in the audio system. However, if the problem still exists, we can offer some options to solve it.

    Method 1

    The first step is to ensure that your playback devices are configured correctly. To do this, we go to “System settings” - “”, in the “Playing sound effects” column the correct output device must be indicated. You can check the sound using warning signals.

    Method 2

    Find the “Audio-MIDI Settings” application in the “Utilities” folder. Here you can see all currently connected audio input or output devices. In some cases, switching settings can fix audio playback problems.

    Method 3

    As a fallback, we can also suggest restarting the macOS audio process. This can be done through the “Terminal”.

    • Launch the command line. Paste the following command into the application window: sudo killall coreaudiod
    • We confirm our actions using the administrator password.
    • After restarting the computer, the problem should be resolved.
    Read more: