Engineering menu for meizu m3 note. Meizu M3 Note engineering menu: what is it and how to get there. How to unlink Flyme account from Meizu smartphone

Many of us, in the process of using our smartphone, have more than once caught ourselves thinking that in fact it would be better to configure this or that function: “Here I would do it like this, but here I would tweak it a little.” Agree, it would be very convenient to have such an opportunity. And I must say that there really is such an opportunity, it’s just that smartphone developers are not too eager to convey this information to a wide audience.

Almost every smartphone based on the Android operating system has a special " Engineering menu". With it, each user can debug their phone for themselves and make it much more convenient to use. What we can configure from the main menu of the device is only a small part of its fine-tuning capabilities.

However, this menu is hidden from prying eyes for a reason. It should be understood that such opportunities are designed primarily for specialists and are far from always intuitive. Inexperienced users, instead of making their smartphone better, are more likely, on the contrary, to harm it. However, if you communicate with electronics on you or just a neat person who is used to following instructions clearly, then you have nothing to fear.

Today we will tell you about Engineering menu» Meizu M3 Note. The menu of this smartphone is quite friendly and easy to use, in addition, it is as similar as possible to other engineering menus of Chinese brand smartphones based on MediaTek chips. This information will undoubtedly be useful to both Meizu M3 Note owners and users of most other Meizu smartphones. Happy reading.

What is the "Engineering menu"?

« Engineering menu» allows you to manually set the necessary parameters for a particular equipment involved in the device. " EngineerMode”is intended primarily for smartphone developers. With its help, the company's engineers carry out the final configuration and testing of all systems of the device, as well as check it for errors and malfunctions. Secondly" Engineering menu» is often used by specialists from service centers to set up phones after repair or in cases where the problem can be solved without resorting to more serious interventions. In the same time " Engineering menu" was never intended for ordinary users, therefore, in the event of a device failure due to interference with " EngineerMode» The owner of the smartphone is likely to lose the warranty.

« Engineering menu"In the vast majority of cases, it is built right into the Android software. However, very often, after all the necessary settings, developers intentionally remove it in order to protect the smartphone from outside interference. In such cases, get into EngineerMode"In a simple way, it becomes impossible and you have to use special programs that can be downloaded from services like Google Play or (as an option) use firmware written by third-party developers. Also the presence or absence of Engineering menu” may be affected by the chipset used in the smartphone. So, on the chips of the company MediaTek " Engineering menu” will be present with a high probability, while at the same time, when using Qualcomm chips, its presence is a much rarer fact.

As for " Engineering menu"In Meizu smartphones built on MediaTek processors, and Meizu M3 Note in particular, then, of course, it is present in full. Moreover, this menu in Meizu phones is quite easy to call and is a fairly friendly interface, which we will talk about with you later.

Login and review of the "Engineering menu"

To enter the " Engineering menu»Meizu, you need to enter the code in the smartphone’s proprietary dialer: *#*#3646633#*#*. By the way, such a code is used not only in Meise, but also on most other smartphones built on the Android operating system. So if you are reading this article, but do not own a phone from Meizu, you can also try to call a special menu on your smartphone using this code.

It is also important to note that in order for this code to work, it must be typed manually. If he tries to copy this code or dial it using the phone book, then most likely it will not work and nothing will happen. In the case of correct operation, you will immediately fall into the " EngineerMode". On Meizu phones, this menu will look a little more archaic than the main menu of the phone, but nevertheless it is quite easy to use and is controlled by ordinary clicks on the screen.

After activating " EngineerMode"On Meizu M3 Note, you will be presented with six main tabs, which include the following items:

« Telephony» (« Telephony»). This tab is completely devoted to setting up communication and related modules. So, here you can set up automatic call reception, test the signal reception level or check the compatibility of your device with mobile operators. Of the less popular functions, there is also the ability to disable support for certain network bands and configure the 2G / 3G / LTE modem parameters.
« Connection» (« Connectivity»). This tab is responsible for wireless data transfer. Here you can test, as well as very finely tune the operation of the Bluetooth and Wi-Fi modules.
« Component testing» (« hardware testing»). As the name implies, in this tab you can test almost all important elements of the smartphone. Including you can work with the display, sound, test the sensors and the main modules of the device.

« Location» (« location»). Again, according to the name, this tab is designed to work with technologies responsible for determining the location of the smartphone. From useful it is possible to note the ability to disable location determination by cell towers. This feature will not be useful to all users, and disabling it can reduce overall power consumption. Of the minuses - the location of the phone will become much longer, so try not to forget what exactly you turned on or off in " Engineering menu».
« Debugging» (« Log and Debugging»). This section contains various built-in utilities and tests from MediaTek and other smartphone component suppliers, as well as a wide variety of logs.
« Other» (« Others»). This section includes all those tests and settings that, for various reasons, did not find a place in the previous five tabs. Of the interesting, it is worth highlighting the ability to change the size of all types of fonts in the subparagraph " Settings Font».

How to increase the sound in the headphones to full volume?

Very often Meizu M3 Note users " Engineering menu”I am primarily interested in precisely in terms of adjusting the volume of the sound of the smartphone in the headphones. By default, on almost all Meizu phones based on MediaTek processors, the maximum sound volume in the headphones is significantly lowered. This is done in order to protect the hearing of users, but for some music lovers this level of maximum volume is often not enough.

« EngineerMode”, in turn, allows you to bypass this limitation and fine-tune the volume level to the value that you see fit. To do this, you need to open " EngineerMode” as shown above and follow the next few steps.

Step one. Scroll " Engineering menu» to the third page titled « hardware testing'and select ' Audio».
Step two. Go to sub-item " Volume", and then - in the sub-item" Audio Playback».
Step three. In this subparagraph, find the value " Heatset PGA' and customize it as you wish. By default, this value is set to 100, while the maximum value you can set is 160.
Step four. Scroll to the bottom of the page and confirm your settings by clicking the " set».
Step five. Roll up " Engineering menu” and restart your smartphone for the changes to take effect.

That's all the settings you need to make your Meizu M3 Note sound significantly louder when using headphones. Try experimenting with other items as well. Engineering menu” to better customize your phone. But do not forget that you need to do this carefully and only at your own peril and risk.

Buying a new smartphone, a person immediately thinks about how to customize the device for themselves. For full-fledged work, you need to customize the gadget by authorizing a user account, select a ringtone and select other parameters at your discretion. Meizu smartphones have similar settings. This is due to the fact that the company's devices run on Flyme OS (this is a shell that differs markedly from the standard Android). Accordingly, the design and functionality are practically the same. The exception is some details. This material will tell you how to set up your Meizu phone.

Getting to know your smartphone

Before you turn on your smartphone and start setting up, you should familiarize yourself with the appearance of the device. This will answer many questions regarding the management of the gadget. The company's smartphone has a screen on the front.

By tapping on it, you can start video, music, open the necessary contact, turn on the radio or take a screenshot.

To enter information on the display, a virtual one is used, which at any time will help you dial SMS.

Above the screen is a speaker, a front camera and an indicator showing a missed notification. At the bottom there is a microphone, a USB connector and an aux. At the back there is a main camera with a flash. There is no need to talk about the case materials, since the case will still close the back panel.

Primary settings

The first time you turn on your Meizu M5s, Meizu M6 or other company smartphone, you will first be prompted to select a language. The global firmware already has a Russian version, so there should be no problems.

By the way, a Flyme account can later help you find a smartphone if it gets lost. In this case, through a computer, you can track the location of the gadget or block the device.

Firmware update if necessary

Everyone wants Meizu U10, M5 Note, M3s or M5s to be up to date, so it is important to check the OS is up to date. Meizu smartphones run Android in the Flyme shell.

To check the relevance of the firmware, you need to go to "Settings", select the item "About phone" and enter "System Update". If the installed OS version is not up to date, you will be prompted to update the OS.

Unfortunately, not all firmware are installed over the air. In some cases, you have to resort to the manual method. On the official website of the company there is a section with firmware, where you need to select the model used and the required version. To install the downloaded OS, make sure that the battery is sufficiently charged and perform the following steps:

Open the downloaded zip file as a normal file;
Clean up the information after making a backup copy;
Click "Start" and wait a few minutes.

After completing the installation of updates, you can restore deleted information if a backup was previously made.

Create a backup

Anyone who is looking for an answer to the question of how to set up Meise will probably want to update the gadget to the current version. During the flashing process, it may be necessary to clear information, so it is important to take care of creating a backup. A backup copy is needed not only in this case. It will always be useful, whether you have Meizu M5 Note, M3 or U20.

To make a backup, you need to follow the instructions and tips:

Go to "Settings";
In the item "About phone" find "Memory" and click on "Backup";
Click "Make a backup".

Backup will avoid accidental deletion of important files, after which you can safely upgrade to the desired version of Flyme. With a backup, the storage of files will always be under reliable protection.

Installing Google services if needed

It happens that a smartphone bought in China, for example, Meizu M3 or Meizu M5 comes without Google services by default. This indicates that the seller sent the Chinese version of the device, and not the global one. In this case, do not despair.

Google services familiar to Android are installed in no time, so even a “teapot” can figure it out. To install the Play Store and other applications, you need to go to "Meizu AppCentre" and find Google Installer. After installing this application, the system integrates all Google services into the smartphone.

Setting up the fingerprint reader

The main security element in most smartphones (Meizu M5, M6, M6 Note and others) is a fingerprint scanner. With the help of the mentioned sensor, the device is unlocked.

To register, you need to go to the "Security" item of the smartphone settings, then - "Manage fingerprints". Meizu will ask you to press the scanner several times so that it remembers the fingerprint. You can add multiple fingerprints for different users at the same time.

Another way to secure your smartphone is a password. It is also configured in the "Security" item. For those who do not know the password, the gadget will be inaccessible.

Traffic consumption setting

Most often, mobile operators, such as Tele2 or Megafon, provide users with tariffs with a limit on the amount of downloaded data per month. In this regard, the question of the rational use of traffic becomes relevant.

Therefore, the owner of the same Meise M6 settings of the presented type should not bypass.

Manipulations should be carried out in the menu item "Traffic Management".

In it, you can set monthly limits, as well as prohibit some applications from spending traffic.

Special game settings

It's no secret that smartphones are often used by people as gaming gadgets. Technology allows you to play gaming products, getting maximum pleasure, thanks to chic graphics. Of course, it all depends on the processor.

A weak MTK has less performance than a nimble Snapdragon. Be that as it may, Meizu has provided a solution for all models that support Flyme 7. In this version of the OS, a game mode has been added that automatically optimizes the settings for good performance.

Discharging in this case will be faster, but the quality of the graphics can surprise.

To turn on the game mode, you need to go to "Settings", then to "Game Mode" and turn on "Game Acceleration" in it.

Call recording

Someone does not need to configure this function, but still it is impossible not to note the usefulness of such a function. Recording calls will help save an important conversation.

You just need to go to the settings of the Meise model M5 or any other, and then tap on the “Call Recording” item.

Thanks to this, the audio of the conversation will be converted into an MP3 file that you can use as you wish.

Reset

An extreme measure often used when reselling a smartphone. The developer has provided in Meizu devices the ability to reset all saved settings.

The action plan is the following:

Turn off your phone;
Press the volume up button and the power button;
In the window that appears, click "Clear Data".

After cleaning, which takes place in just 6 seconds, the smartphone will become like a factory one.

Conclusion

Proper smartphone settings help to avoid many problems. For example, a well-chosen configuration will not force you to run to the store to make a return because of a device you don't like. Be sure to register a finger to recognize the owner, create a Flym account, turn on the Russian language and, if necessary, reflash the smartphone.

In this user manual, we will consider the most basic questions regarding Chinese Meizu smartphones and the answers to them, as well as tell you how to set up literally everything on your Meizu phone and how to use it to the maximum. The guide will be useful to owners of all Meizu devices: M3/X/E/S/Max, M5/M5S/Note, MX6 and Pro 6/6S Plus.

How to check Meizu phone for authenticity

To check the origin of your Meizu smartphone, you need to follow this link http://service.meizu.com/product to the official website of the company. In the right corner there will be a login shortcut to your Flyme account, log into your account and follow the further instructions in the service.

There are also many services for checking the IMEI of a smartphone on the Internet, but alas, they do not determine whether your phone is original or not. These services simply show whether the smartphone is certified in your country.

You can also use the AnTuTu application to check the originality - just run the benchmark and compare the characteristics of your smartphone with those declared by the manufacturer.

How to install Google Play Market on a Chinese version of a smartphone

If you buy Meizu products in Chinese stores, there is a chance to get the Chinese version without localization. They are practically no different from the global one, except for the lack of the Google Play app store. Instead of it, there is a pre-installed Meizu's own content store. To install Google services and the app store, follow these instructions:

swipe down to open the notification shade
click on the Wi-Fi icon and connect to the network
open the Meizu AppCenter store
Type "Google Installer" into the search bar
the icon of this application consists of 4 multi-colored squares and the letter "G"
click Install
after installation, open the application and run the installation
after the installation is completed, find Google Play on the home screen
Google settings and services have been successfully installed on your phone

How to enter the Meizu engineering menu

To get into the engineering menu on a Meizu smartphone, it is enough to dial the following command code in the pre-installed Phone application *#*#3646633#*#* . That's all, after that you will be taken to the service menu.

How to turn on, turn off and restart your Meizu phone

To activate a Meizu smartphone, just hold down the power key for a couple of seconds, it is usually located on the side edge next to the volume rocker. After the company logo (Flyme OS) lights up on the screen, release the key.

What to do if the smartphone does not turn on? Try connecting it to the network through the included charger and try to activate it in a couple of minutes. If after that it does not turn on, you may not have a working smartphone.

To turn off or restart the device, simply hold down the power key and select the appropriate item in the menu that appears: shutdown or restart.

How to unlock Meizu if you forgot your password

It often happens that when setting up a new Meizu smartphone, you forget the set password, pattern or PIN. To regain access to the smartphone, you need to reset the password. How to do this - this step-by-step instruction will tell you:

turn on your smartphone
in the password field, enter the last code that you remember
repeat ride 15 times
after that, the password recovery menu will appear
enter your Flyme account password
set a new password in the recovery menu
this is all

This is the most effective way to reset your password in Flyme, but for this you need to know the username and password for your account on your smartphone. Another method that sometimes works is a full hard reset, how to do this is described later in this article.

How to do a Hard Reset on Meizu

To perform a hard reset on Meizu smartphones, just follow these steps:

hold the lock key until the smartphone is completely turned off
after the phone turns off, hold down the lock key and the volume up at the same time
in the recovery menu that opens, select "Clear data"
and press the right key "Start"

Hard Reset in some cases helps to reset the password on the smartphone, how else can you do a reset -.

How to find a lost Meizu smartphone via Flyme

Meizu devices have a smartphone search built into the Flyme firmware in case of loss or theft. To do this, your account must be activated on your device. Follow this link to Meizu website http://finder.flyme.cn/browser/index.jsp , log into your Flyme account and follow the instructions to find your device.

By the way, here you can also click on the lock icon and remotely lock your smartphone. As soon as he connects to the Internet, the attacker will receive a blocking notification and will not be able to access your personal data.

How to take a screenshot on any Meizu

Everything is simple here, taking a screenshot is as easy as on any other Android smartphone. To do this, simply hold down the power key and the volume down (on some models up) at the same time and find the screenshot in the gallery.

How to open Task Manager on Meizu

To call the task manager on a Meizu smartphone, just swipe up from the bottom of the screen - a swipe up gesture. If everything is done correctly, you will see a manager of all running applications for further work with them.

How to close all running applications

This manual is suitable for all Meizu M3 Note, U10 / 20 etc. phones that work on firmware. To check/close all open applications, you need to launch the task manager (swipe from the bottom of the screen or touch key from bottom to top), and then click on the cross icon. All running applications will be deleted from the device memory and closed. Please note that if the application is locked (Lock feature in Flyme 6), then it will not close. To do this, swipe down on it and disable the lock.

How to start multi-window mode on Meizu

To begin with, it is worth saying that not all applications on Meizu devices support windowed mode. Therefore, be careful and don't be alarmed if some of your applications do not want to run in split screen mode.

To enable multi-window mode, launch the two applications you want and drag one of them to the top of the display until it locks into the window. Then, click on the second app and it will open in windowed mode just below the first one.

How to update Meizu firmware

To check if there is a firmware update for your smartphone, go to the built-in Updater app and check if there is a ROM available for download. If there is, connect to Wi-Fi and download the firmware, make sure that your smartphone is at least 30-50% charged and start installing the update. Before updating, we advise you to backup important data to the Google Cloud or Flyme Cloud.

How to enable T9 on Meizu keyboard

If you are using the stock TouchPal keyboard then go to Settings > Keyboard > TouchPal > Smart Engizu and check the first item "Curve - entering words with a stroke" (here is such a translation of the firmware) to activate T9 and uncheck the box to disable T9 on your Meizu smartphone.

How to remove keyboard vibration

For a preinstalled keyboard, follow the following chain: Settings > Keyboard > TouchPal > General settings > Vibrate keystrokes and turn off the vibration sensor and keyboard vibration feedback. For third-party keyboards, like Gboard, the settings are individual.

How to put your ringtone on a contact

In Meizu smartphones, you can assign your own ringtone to each contact. To do this, go to contacts and click on the "Add field" item. Scroll through the menu that appears to the very end and click on "Ringtone". In this menu, you can set a standard ringtone for a contact, or third-party downloaded music from your player.

How to connect meizu to computer

If you have an original smartphone and a whole USB cable, then there should be no connection problems. The device can be connected as a flash drive with files, or as a digital camera for transferring photos.

What to do if Meizu does not connect to the computer? Check if the USB port of the phone and PC is working - whether it is charging from the computer. Try connecting your phone with a different cable and into a different USB port. If your computer does not see your smartphone, it may be damaged.

How to transfer and set up contacts on Meizu

To do this, you can use one of two convenient methods. You will need Flyme or Google account. First, sync contacts on your old smartphone with Google Cloud or Meizu Cloud. Then, on the new device, sign in to your account and sync your data. Thus, the contacts will automatically appear on your new smartphone. The Google account method is also suitable for moving numbers from iPhone to Meizu.

How to Create a Folder on Meizu Home Screen for Applications

To create a folder for your applications, simply drag and drop one program onto another and hold for a while until the container is created. By tapping on the folder name from above, you can rename it, for convenience, you can even add special characters and emoticons.

How to increase the volume in the headphones and make the smartphone louder

Attention, this method is valid for Meizu smartphones based on MediaTek processors. In the stock Phone app, dial the following code *#*#3646633#*#* . In the HARDWARE TESTING menu that appears, find the AUDIO > Headset Mode tab and in the lower limit Max.Vol 0~160 set the maximum value to 160 and save. Do the same in the Headset_LoudSpeaker Mode menu. Now your smartphone will sound louder, both in the headphones and through the main speaker.

How to backup data in Meizu

To backup important data on your Meizu smartphone, go to Settings > About phone > Storage > Backup. Here you can choose which data and files to back up, the necessary ones should be ticked. The backup is saved and available at the following address in the file manager - Disk / Backup. Before completely resetting your smartphone, we recommend that you save a copy of the device to external media.

How to put a photo on a Meizu contact

Flyme allows you to put images on a call contact in HD resolution. To set a contact photo, click on the desired contact, then on the “…” icon at the bottom of the screen, then on the photo icon and set the desired photo or picture from your gallery.

How to connect wireless headphones

For example, take the Meizu EP51 headset, activate Bluetooth on your smartphone and search for compatible devices. In the window that appears, select EP51 and sync. That's all, the headphones are ready for use. The instructions are also suitable for other wireless headphones and Bluetooth headsets.

How to unlink Flyme account from Meizu smartphone

If, for example, you are going to sell or donate your phone to someone, you should first untie your Flyme OS account from it. To do this, simply exit it on this device, and then do a complete data reset (Hard Reset). How to do this is described above.

How to share Internet via Wi-Fi from a Meizu phone

To use your Meizu smartphone as a modem and share the Internet via Wi-Fi on another device, open the quick settings curtain and click on the "Access Point" shortcut. In the menu that opens, set up access and a password for Wi-Fi and start distributing the Internet.

These were the most common questions and answers regarding Meizu smartphones and Flyme OS firmware. If you have additional questions, feel free to ask them in the comments.