How to disable double click on the mouse. Mouse error, double click instead of one? Quick problem solving

What to do if the mouse began to make a double click instead of a single one (constantly or from time to time), although you press the button only once? Here are the causes of this problem and how to solve it.

Causes

Microswitch wear

The most common cause is the wear of the microswitch, as a result of which contact bounce began to occur. There are always more clicks on the left mouse button than on the right (and vice versa if you are left-handed and configured the mouse for the left hand), and the microswitch is designed for a very large, but still limited number of clicks. You can fix it yourself, it will take your accuracy and half an hour of time. If your mouse is a few years old and you don't want to deal with repairs, the easiest way is to go to the store and buy a new mouse.

Software problem

Double-clicking instead of single-clicking is not necessarily a mouse malfunction. This may be purely a software issue with drivers or additional software.

To determine what is the cause in your case, try connecting the mouse to another computer or laptop. If the symptoms persist, then it's obviously a microswitch.

Solutions

Solution for driver problem

If you have Windows, this method can help: through the Control Panel, find the mouse in the list of devices, remove it from there and reboot. The mouse should then reconnect. Perhaps the problem with double clicks will disappear (unlikely).

Software solutions for microswitch wear

MouseFix

There is a purely software solution to help with microswitch bounce: Daniel Jackson's MouseFix utility (for Windows). It intercepts clicks that occur a very short time after the first, since such clicks can only be associated with contact bounce in a microswitch. This utility can be used at least as a temporary solution.

Download the MouseFix utility and extract it to a separate folder.
In the All Programs → Startup folder, create a shortcut pointing to MouseFix.exe.
Log out and log in again (or just run the utility manually for the first time).

Left Mouse Button Fix

Open the mouse. Different mouse models open differently. Often two screws (for a small Phillips screwdriver) are located under the sliding pads glued to the bottom of the mouse in its back - to get to them, these pads need to be pry off with something sharp and temporarily peeled off. In this case, there are latches in the front part - be careful not to break them when removing the upper part of the case.
Mouse disassembly
Locate the microswitch under the button. If access to it with the case open is still difficult, remove the board on which it is installed. You may have to disconnect the cables and / or unscrew something else to do this.
Remove the microswitch cover by prying on each side with something thin and sharp, such as a needle. At this stage, there is a risk of breaking the latches, be careful. Please note that there are non-separable microswitches - in this case, soldering will be the only way out.
Microswitch under the left mouse button
When you remove the cover, a small button (usually white) will fall out of it. Don't lose her.
Micro switch cover and button
Now you need to remove the spring-loaded copper plate from the microswitch - this is the point. Over time, the tongue-spring unbends, the button returns worse to its original position and the click is not clear - then erroneous double clicks occur.

Instruction

If your computer is running Windows 7 or Vista, click the Organize menu in any Windows Explorer window and select Folder and Search Options. The Folder Options dialog box opens.

Now all commands that previously had to be double-clicked will be one click away. For example, to open any file or run a program, it will be enough to click once on the icon.

If you have a mouse model that has additional buttons, you can set one of them to activate commands with one click. To do this, use special software from the mouse manufacturer, with which you can configure additional buttons.

Helpful advice

Please note that some models of manipulators have an additional button that is automatically configured to activate system commands with one click. Usually such a button is located directly on the left mouse button, closer to the wheel.

Sources:

how to set up a mouse with one click

How will they open on the computer folders, in what form they and the files contained in them will be displayed - it all depends on what settings for the folders are selected. All the necessary parameters can be configured in the dialog box " Properties folders". To do this, you need to perform several steps.

Instruction

Open the window " Properties folders". This can be done in several ways. Open any folder on your computer from any directory. Select "Tools" from the top menu bar. In the drop-down menu, left-click on the line " Properties folders”, the appropriate dialog box will open. Another way: open the "Control Panel" through the "Start" button. In the Appearance and Themes category, select the icon Properties folders". If the "Control Panel" has a classic look, the icon you are looking for is available immediately.

In the window that opens, on the General tab, set the settings for the display and ways to open folders on your computer. If in the "Tasks" section you have a marker in the "Display a list of typical tasks in folders" field, the area of your open folders will be visually divided in two. On the right side there will be icons of files contained in folders, on the left side - tasks that can be performed for these files (rename, copy, delete, and so on). The marker in the "Use regular folders Windows" means that the task field will be missing.

In the Folder Browse and Mouse Clicks sections, set options for how folders are opened: folders to a folder, all actions can take place in the same folder, or each folder can be opened separately, and they themselves folders can be opened with either one click or double click. For example, the path My computer / Local disk C can be done in one folder, or you will open two at once folders: the first is "My Computer", the second is "C: /".

Controlling a computer with a mouse is based on an event mechanism. And the simplest trick is pointing. Often it allows you to open a submenu or, for example, get a tooltip with additional information.

Another close technique is the rillover. It consists in the fact that when the mouse pointer is hovered (moved) over the control, it changes shape. For example, the buttons are recessed, and then pop up again; the counters turn one turn, the drawings are animated ("come to life"). The Windows operating system itself does not use this technique, but it is used on Internet Web pages and in some programs. Sometimes it is useful to move the mouse over graphic illustrations to see something new that is hidden from a superficial glance.

For example, double-click the My Computer window and the Recycle Bin window. In the My Computer window, get acquainted with how many disks are in the computer, and in the Recycle Bin window, see which documents and programs have been previously deleted. If the Trash is empty, then someone has already emptied it :). Do not close open windows yet - they will be useful to us, but in the next article;).

P.S. I want to remind you about the folder - My Documents - how do you approach it? Consumer or professional? Link to article: .

Causes

Microswitch wear

Place the mouse pointer on this word and double click the left mouse button. Place the mouse pointer to the left of the document window next to the line and double-click with the left mouse button. Place the mouse pointer to the left of the document window, next to the first selected line, press the left mouse button, move the pointer to the last line to select, and then release the mouse button.

Place the mouse pointer inside the paragraph and click the left mouse button three times. Move the mouse pointer to the left of the window and click the mouse button 3 times. You can also use the Select All command from the Edit menu. To deselect a word or piece of text, simply click anywhere in that text with the left mouse button.

Software problem

Double-clicking instead of single-clicking is not necessarily a mouse malfunction. This may be purely a software issue with drivers or additional software.

To determine what is the cause in your case, try connecting the mouse to another computer or laptop. If the symptoms persist, then it's obviously a microswitch.

Text formatting is mostly done using the toolbar. It offers the fastest solutions for changing key text parameters. Text formatting includes character formatting and paragraph formatting. In addition, edge size, page size, and orientation can affect the appearance of text.

Character formatting is the definition of their appearance and refers to the type and size of the font used, as well as their style. Formatting a paragraph consists of setting the parameters for the entire paragraph. A paragraph can be centered, right-aligned, indented left or right, or only the first line of that paragraph can be indented. You can also set a specific spacing between the lines of a paragraph.

Solutions

Solution for driver problem

Software solutions for microswitch wear

MouseFix

To change the text format, select the desired piece of text and change its format - choosing from the functions available on the toolbar to format the text as needed. Text can also be formatted in other ways. The dialog box displayed as a result of selecting these commands has a number of text formatting options. The upload window helps you manage and manage your shipments. For the convenience of the user, information about all shipments and access to downloaded files is provided in one manager window.

Download the MouseFix utility and extract it to a separate folder.
In the All Programs → Startup folder, create a shortcut pointing to MouseFix.exe.
Log out and log in again (or just run the utility manually for the first time).

Left Mouse Button Fix

The mouse that took part in the shooting has been successfully working for a year and a half after the operation.
How to open the download window?

Hi, I have a logitech mouse on a laptop, it started to involuntarily double-click the left button, with one click. This is an abnormal phenomenon, nothing more than a problem that we will solve today.

There are two ways to resolve the situation, your solution may differ from mine, since our mice and systems are different, we are doing diagnostics! There are two solutions here, mechanical and software, now you will understand everything.

Download window settings

Disclaimer: If you find that you no longer need to upload a file, click the "Cancel" button in the file description area. The line will be less busy, other downloads or browsing will be faster. The file is open. If you want to open the downloaded file at the end of the file, double-click in the send area. Reset: If the file was not sent or the session was dropped, you can try to resend the file.

How to open the download window?

The download window not only stores information about all items and is stored in one place, but there are also tools to perform different deliveries. Pause: You can pause the file at any time by clicking the "Pause" button in the corresponding field. This command can be useful if, for example, when sending a large file, you need another file more urgently. Selecting one of the most used files from one file at a time and using this command can speed up downloads. While waiting for the download, a Continue button will be displayed.

Problem

In this article, we solve the problem of an involuntary, double click, which should not exist in principle. That is, we fix glitches and software violations, and possibly mechanically adjust the rodent ...

If you just want to change the double click to a single one, in order not to disturb your parents to sleep, By the way, if you still don’t know how to install Android applications, Odnoklassniki, VKontakte, games and applications, read this post.

Analysis

I came to the conclusion that my problem lies in the mouse itself, this was prompted to me by Windows itself, most recently, I switched from 7 to 8.1 and the double-click problem remained.

As a conclusion, we can assume that the problem is in the mouse itself.

How to fix, mechanically, a little lower. Now, you need to think, do a little analysis.

Perhaps you changed the OS recently, but dv. click left?

This can also be confirmed by removing the device drivers, reinstalling.

If you have a cool, gaming device, then 100% of it comes with a disk with firewood.

Delete the old drivers and install again, or better, visit the manufacturer's website and download the latest driver for your operating system. How to determine the real office. site and distinguish it from a double read (important!).

But in this way we reinstall the standard mouse driver in Windows:
Start => Control Panel => Device Manager =>

Choose your mouse. Right-click to call the context menu, "Properties".

The "Driver" tab, and uninstalling the "Uninstall" driver.

We do not argue with all Windows warnings, we agree.

If everything goes smoothly, then the driver will be completely removed, after which the mouse will stop working.

Now remove the connector and restart the computer, this is not necessary, but it definitely will not be superfluous.

Since the mouse is disabled, we use the keyboard to restart the computer.

Click Start, use the arrows and the Tab key to select "Shut down", and press Enter.

After the reboot, plug the mouse back into the connector, the system will automatically detect the device and reinstall the driver.

If the double click did not disappear anywhere, but simply went to drink tea and returned, we conclude that the solution lies not in the provision, but in the device itself. And it needs to be edited for this:

And so, we take a chisel, a hammer, a file and act like this guy on one of the forums:

But seriously, let's see how it's done.

mechanical method

We disassemble the mouse by unscrewing a few bolts from the bottom, my problem was that the deflection of the plate increased, changed to an indecent state in the micro switch of the left mouse button, the figure shows how to disassemble and fix this nuance:

With care and consistency:

1. Unscrew the screw
2. We take out the microcircuit
3. Disconnect the power from the microcircuit
4. We bring the microcircuit to the light

5. We straighten the plate.
5.1. With a knife we disconnect this box.
5.2. We remove the plate with our hands, bend it almost to a flat state.
5.3. We install it back.
5.4. We hold the nutcracker with scissors for clamping and place it in the box.
5.5. With the same scissors, we take the entire structure by the nutcracker and insert the box back.
5.6. We snap our fingers, it snaps into place and that's it.

6. Connect the power cord back to the chip.
7. Insert the chip.
8. We twist the screw (s).

The log of your actions may differ slightly from mine, since the designs are different, but the essence of this does not change.

conclusions

As always, everything depends on the quality of workmanship, as a consequence of the cheapness of our choice.

Yes, and from the manufacturer, of course, for example, when buying his problematic logitech mouse, the sales assistant simply blew it ** that the company is simply a leader in the niche and you simply cannot find such quality, at a price of 250 rubles.

So, guys, I wish you fewer problems, and a good choice!

Did my advice help you? Do you have any questions?

Be sure to write in the comments, the topic is topical and perhaps my recommendations are not enough!

And also, do not forget to repost the article in your social networks, I will be pleased

Suddenly having problems with your mouse in Windows? The left button sometimes does not work and you need to click 3-4 times to launch a program or shortcut on the desktop? Why does this problem occur and what to do to fix it.

One of the most annoying problems with a mouse is a problem with its left button. A situation arises when suddenly, for no apparent reason, the left mouse button does not work, or it starts responding to user clicks every other time.

Every fourth or fifth click is not perceived by the system, this behavior is very annoying, because it makes it difficult to work on the computer - instead of double clicking on the program shortcut, sometimes you need to click 3 or 4 times. This also applies to performing any actions - we want to quickly select, for example, a group of shortcuts on the desktop, to drag them with the mouse cursor, but it turns out that the left button does not work. Why does the left button not always respond to user clicks?

Of course, the problem may be in the mouse itself and the damage is purely technical. The left button is worn out and does not always respond to clicks. In this case, you need to repair it or buy a new mouse.

But before doing this, you need to check whether it works on another computer or - if possible - connect another working mouse to the computer. Thus, you can exclude or confirm its technical malfunction. But if you connect a problematic mouse to your friend's computer and it works correctly, then this means that there are problems with your PC. Then it makes no sense to buy a new mouse - you should look for a solution in the Windows 10 settings.

Step 1: Connect the mouse to a different USB port

Look through which input your mouse is connected to the computer. In most cases, the connection is made through the USB port, but occasionally there are devices with a PS2 connector.

The first step is to check the health of the USB port, because it can be damaged and cause problems with operation. Connect the mouse to another port without turning off the power of the computer - it should be detected in a few seconds.

Step 2: Check the settings in Windows Device Manager

If the above method does not work, the controller responsible for the operation of the USB ports may be the culprit. The system is equipped with a function that disables or reduces the activity of individual computer components as part of a power-saving mode. There is a possibility that the mode affects the USB driver and therefore Windows 10 sometimes "does not catch" left button clicks.

In Windows 10, right-click on the Start button and go to Device Manager or call it with the command "devmgmt. msc"

Expand USB Controllers. Here you will find items such as "Generic USB Hub" and "USB Root Hub". Double-click to open each and go to the "Power Management" section.

Uncheck "Allow the computer to turn off this device to save power". Repeat these steps for each item in the USB Controllers section.

Step 3: Check your power settings

The next step is to configure the power options for the active profile. To do this, go to the Windows 10 Control Panel and type in the search box in the upper right corner "Power Options".

A window will appear with a list of primary and secondary plans. One of them will be marked, i.e. the one used by the system. Click next to it on the item "Change plan settings", and then in the new window select "Change advanced power settings".

Find USB Settings - USB Pause Setting and select Disabled. Then check how the device works.

Step 4Turn Off Touchpad Delay (Laptops)

Windows 8.1 and 10 come with features that are useful for laptop users, including a feature that slows down response to clicks as you type. Have you ever been typing on a laptop and accidentally touched the touchpad with your palm, causing the mouse cursor to jump?

Touchpad delay serves to prevent such situations. When the laptop detects that you are typing, a click delay is activated. However, this feature may not be convenient for players who play on laptops with mice, and here's why.

It turns out that in some cases the function blocks the action of the mouse buttons connected via USB. If you play on a laptop, then your hands, as a rule, are on the keyboard all the time - other input devices, according to the system, should not be involved.

The delay function treats the game in the same way as typing, and blocks mouse clicks for a short period of time, and, unfortunately, periodically (the button works every other time). In this case, the delay function on the laptop can be disabled.