• My meizu m3 note phone is getting hot. How to fix the problem with fast discharge of Meizu M5 Note. The Wakelock Detector utility will help you find energy-consuming applications.

    Good afternoon, friends. There was a problem - Meizu M3s Mini out of nowhere, started get too hot and the charge began to drain quickly, even on the desktop, without running applications and games. It turned out that this “multimedia” process began to idle the processor by 80% 24/7, which is why heating occurred, which is why the charge was leaking. The problem is solved! And it can be solved very simply - by updating the software to a newer one, the same one that you already have (firmware).

    I want to help everyone who has encountered this problem, so I will try to explain in as much detail as possible what you will need to do. Don’t be alarmed, there will be a lot of text, but only because everything will be described in detail. In fact, this is done in about five minutes maximum. Please, before starting the update, read the entire instruction to the end, understand it, and only then start from the first point.

    1. Export contacts. — We will update the firmware of your smartphone, and therefore all your data will be reset. Therefore, we need to save contacts from the phone and SIM so as not to lose them:
      Go to Contacts => three dots in the upper right corner => settings => Manage contacts => export contacts => all => export => save to phone memory (weighs a couple of kilobytes).
      Contacts saved. Now, after you have a clean firmware, you simply restore them from this file (import from disk => 00001.vcf)
    2. Saving other data. If you have any games/applications in which the process is extremely important to you, you can save your achievements from them too. Find out how to do this yourself; I can’t describe it in detail, since I don’t play. Also, don’t forget to remember all your passwords, logins for your applications/mails/playmarket - you will need them, since everything will be reset and you will need to configure it again. Also save unsaved but necessary numbers from SMS correspondence. SMS correspondence will also be erased.
    3. Go to settings, look at the current version of your firmware: settings => about phone => details => firmware version. I currently have 5.1.3.2G (the letter G means that the firmware is global). I was upgrading from version 5.1.3.1G. You, also, if you have global firmware installed, can download any global one, but not older than your current one. (example: you cannot install 5.1.3.1G on your installed 5.1.3.2G, but you can do the opposite). You also cannot update the firmware if the letters are different! (example: from firmware A you cannot use firmware G, but you can download the same one as you have and update to it - the letter in the firmware must match). Download the archive with the firmware, connect the smartphone to the computer via cable. Rename the archive with the firmware to “update.zip” without quotes, where “zip” is the file extension. And copy the resulting archive to the smartphone’s memory. Disconnect the cable. Attention! The charge level should not be below 30% - recharge.
    4. On the smartphone, on the desktop, go to the “Explorer” application => Local files => scroll down and select our archive (update.zip). Flym will ask you: “A reboot is required to update the system.” We put a tick on “ reset data» => update now.
    5. The smartphone will automatically update the firmware. Don't be alarmed, this may take about 5-10 minutes, just wait without pressing anything.
    6. The smartphone will reboot after finishing, we are taken to the language selection page. Here, choose a language, set the parameters to your taste.
    7. Let's exhale. Now we have clean firmware. To prove this, the curtain will display the inscription “successfully updated.”
    8. Go to contacts => three dots in the upper right corner => settings => Manage contacts => import from disk => 00001.vcf => import. Congratulations, all contacts are in place.
    9. Well, that's all, you can use it. In my firmware 5.1.3.2G Google Play was already installed, so I just went into it and downloaded what I needed. After such an update, the glitch with the “multimedia” process or the “fly” process disappears. In fact, this process can be considered flashing a smartphone. But all this is done through semi-automatic updating, through a regular “update”, so no difficulties should arise.

    Many Meizu owners complain about the rapid discharge of batteries in their smartphones. If this happens when the device is actively used, then there is nothing unusual about it, since under heavy load the processor consumes a large amount of energy. If the battery dies even when the phone is in rest mode, this may indicate a malfunction of the mobile device or its incorrect configuration. Let's look at why Meizu Pro 6 and Meizu M5 Note discharge quickly and how to fix the problem yourself.

    Reasons for the accelerated discharge of Meizu smartphones

    It's no secret that the Android OS is battery-hungry. To extend autonomy, almost all Meizu are equipped with good batteries, the capacity of which is enough for several days of moderate use. However, if your Meizu M3 Note with a 4100 mAh battery or M5 Note with a 4000 mAh battery needs to be recharged daily, most likely there is a malfunction in their operation.

    Meizu batteries can discharge quickly for the following reasons:

    • as a result of a decrease in the capacity of the power supply element;
    • due to incorrect OS settings;
    • through a software glitch.

    Let's look at each case in more detail.

    Battery problems

    The batteries used in Meizu M3 Note, M2 Mini or any other smartphone have an indicator such as working life (number of charge/discharge cycles). After it is exhausted, the product’s capacity decreases by almost 50%. Therefore, if you actively use your phone for a long time, you may need to replace the battery with a new one.

    You can check the battery status through Meizu:

    Overheating negatively affects the condition and service life of the battery. Therefore, try not to use your phone while charging and do not play “heavy” games for a long time.

    Incorrect operating system configuration

    If the Meizu M5 Note was purchased recently, then problems with accelerated discharge will most likely be associated not with the battery itself, but with incorrect settings or malfunctions of Android. In this case, it is worth trying to change some operating system parameters:


    If the battery on Meiza quickly runs out, it would not be a bad idea to try activating the economical operating mode on it. This can be done through the Battery Doctor program:


    Software malfunctions

    Some programs (especially those downloaded from third-party resources) place a heavy load on the central processor, which leads to rapid battery drain. Therefore, if your device dies after installing such software, it is better to remove it immediately.

    The Wakelock Detector utility will help you find energy-consuming applications:


    By identifying and eliminating the reason for the rapid discharge of the battery, you will not only increase the autonomy of Meizu, but also extend the life of the battery, saving a considerable amount on its premature replacement.

    It happens that suddenly the smartphone begins to discharge on its own. It seems like you don’t do anything with it, but the battery melts before your eyes. Who is to blame, what to do and where to find a solution to the problem? Now let's figure out what can lead to such an unpleasant problem.

    Operator

    The operator may be primarily to blame for this. Networks work differently, in one place the signal from the tower is better, and in another - worse, so this hits the battery. Poor signal reception from the base station forces the transmitter in the smartphone to operate at maximum power, compensating for the loss of the signal, hence the increase in power consumption. Frequent changes in network mode also affect survivability, for example, when reception jumps from 3G to LTE and back. The same can be said about Wi-Fi, although solving problems with your home network is much easier than communicating with your operator about improving the quality of communication. Therefore, if you live far from base stations, all you have to do is stock up on powerbanks or don’t go far from the outlet.

    Cold

    Modern phones have Li-Pol batteries that don't like the cold. At subzero temperatures they lose up to 30% of their rated capacity. This is normal, warm up the device and the problem will disappear.

    Wireless connections

    It happens that an application can use your phone's resources even though you are not using it. This is especially true for geolocation functions; GPS can drain the battery in a matter of hours, so when the first hint of problems arises, it is worth checking maps, taxi call services or other similar programs. Even a weather widget can affect battery life by periodically checking the phone's position and quietly draining the battery.

    To avoid problems, you can quickly turn off GPS altogether using shortcuts in the notification shade, turning on the function only when necessary. At the same time, functions such as Bluetooth or NFC are very economical, working in the background, they are invisible against the background of the overall energy consumption of a smartphone.

    Applications

    You can monitor the activity of your smartphone through Settings - Power Management. The most resource-intensive functions over the last 12 hours of phone operation are highlighted here. If you wish, you can monitor how the battery drains on a graph using visual statistics. We go to Settings, then we study how the battery is doing. The system itself will show where the energy goes if you study two categories of data. The first is programs - these are applications in the smartphone’s memory that run in the background; the phone wastes battery resources on them. If you suspect that the application is too active and consuming battery power, then you can close it right here. The second - hardware functions - shows all other power-hungry processes that are not related to the operation of software. This includes wireless modules, as well as display operating time. Let me give you a few examples.

    Google Play services often take the lead in energy consumption, what should we do with them? This is a standard Android feature, and you can’t get rid of it? Try clearing the cache by deleting old data. You need to go to Settings - Applications - All programs - select Google Play Services there, and then click on the Clear cache button. For prevention, this operation can be performed monthly.

    Another option is that the screen comes first. Reading, watching videos, using the camera, and almost all functions lead to the display consuming a lot of energy. For more efficient energy saving, you can reduce the display operating time by setting a minimum delay for turning off the backlight. In addition, you can change the brightness not automatically, but manually.

    Let's say that checking your smartphone through the built-in functions has led to nothing; you cannot identify the culprit of the rapid battery drain. Then you can go further and install specialized software. The program has proven itself well Wakelock Detector: download (Google Play).A very useful application will determine what is wrong with the device. But there's one catch: you need root for it to work. Fortunately, it is very easy to root Meizu smartphones, so if you read these instructions, you can easily do it on your phone.

    After installing the utility, you just need to charge the smartphone and wait a while, leaving it alone for 2-3 hours, or better yet, overnight.The program will show in detail what is working in the background and does not allow the device to lie still, conserving charge. There are several types of data sorting: screen and processor activity, device awakening, operating and startup time. Simply put, they will highlight the most energy-consuming functions, showing those that the standard application on the phone cannot track.If you go further and launch “Advanced Mode”, then you can monitor system processes.

    Mobile devices have become quite powerful and perform most of the functions that previously only desktop computers could offer. However, the big drawback remains battery life. Today we will look at a question that users often ask: why does the Meizu smartphone discharge quickly?

    Why does it erupt quickly?

    The simplest answer is that the battery installed on board the smartphone does not have enough capacity to meet your expectations regarding autonomy. But this will not solve your problem in any way, so let’s talk constructively. First, you need to determine whether there are any hardware problems with the battery: power controller, loss of capacity, and so on. Secondly, if everything is fine with the hardware, then you need to check whether charge consumption is being properly recorded. For example, if the charge level drops to 1% and the smartphone still holds for another 5-7 hours, then this is clearly a problem with the software - reset the settings, in most cases it helps.
    Also, a common problem is that apps consume too much power using 3G/4G, GPS, NFC and so on. Optimize the number of applications, permissions for them, disable unnecessary features and services.

    How to fix

    If your Meizu smartphone is under warranty, then you can contact the service center with this issue if you are sure that the problem is in the hardware and not in the software. If the device initially performed poorly, it is better to return the device within 14 days. But as for the hardware, the problem may be with the controller, which reduces the battery life, or there may be a short circuit on the board. In such cases, you definitely need to either exchange it for another one of the same type, or demand a refund.

    Reset settings

    If the problem is in the software part, then you just need to reset the settings, unless, of course, the problem is in the crooked firmware. In this case, you only need to look for a newer version of Flyme, update your smartphone, or flash it on a custom one if it is more stable.
    Of course, do not forget that there is a possibility of a banal infection with viruses; if the “infection” is deep, then a hard reset will not solve the problem; you will need to flash the firmware with full wipes.

    Read more: