How to turn a landscape page into a book page. Making a sheet with landscape orientation in Word. Setting landscape orientation in any document

The orientation of pages in an MS Word document can be portrait or landscape. Most often, when formatting text, pages are in portrait orientation. But it also happens that a drawing, graph or inscription in large font does not fit on the page in width. In this case, you can make one or several landscape pages in Word. I will talk about this in this article.

How to make all pages in landscape orientation in Word

This is the simplest question. Open the document you want, then go to the tab "Page Layout". In the section "Page Options" Click on the “Orientation” button and select the appropriate item from the menu. After this, all pages of the document will become landscape orientation.

How to make landscape orientation for several pages in Word

Now imagine that you have several pages in a Word document for which you need to set the orientation to landscape. All other pages should remain in portrait orientation.

To do this, select all the text on the desired pages, go to the tab "Page Layout" and in the section "Page Options" click on the small arrow in the lower right corner.

A dialog box will open. In it, in the “Orientation” section, put “Landscape”. Then, in the Apply field, select "to selected text" and click "OK".

Selected pages became landscape orientation, while all others remained portrait.

There is another way to make several landscape pages in MS Word. To do this, put italics at the beginning of the text, on the page from which the landscape ones begin, go to the tab "Page Layout", click on the “Breaks” button and select from the drop-down list "Next page".

Now place italics at the beginning of the page where the portrait pages begin again, and repeat all the steps. When non-printing characters are enabled, the following message will be displayed: "Section break (from next page)".

Put italics on one of the pages that will be landscape, go to the tab "Page Layout" and in the section "Page Options" click on the arrow. In the next window, select landscape orientation, and in the "Apply" field select "to current section". Click OK.

All pages that were in the current section became landscape orientation.

How to make one landscape sheet in Word

If you need to make one landscape page in Word, then you can use the methods described in the previous paragraph. Only apply them to one page.

Now you can easily create book or landscape pages in your document. Moreover, you can change the orientation for both several and one page.

Rate this article:

When working in the Word text editor, portrait page orientation is not always suitable. Sometimes it is necessary for the pages to be like in an album, i.e. located horizontally. It's not at all difficult to do this. It is much more difficult to create a landscape page in Word in the middle of a document. This is where you have to work hard.

Default O The page orientation in Word is portrait, but it can be changed to landscape if necessary. How to do this?

This may be necessary when creating reports from or for an album.

Select a team – File – Page Options...

2. In the window that opens “ Page Options » select the tab « Fields" In the section " Orientation» click on « Landscape" and save by clicking the " OK ».

If you want your document to have only one or more sheets in the middle of the document in landscape orientation,

then place the cursor on the page that should be landscape and select from the menu – File – Page Options . In the window that opens " Page Options " on the " tab Fields" in the section " Orientation» install « Landscape" Below in the section " Sample" in the window " Apply" in the drop-down list, select " until the end of the document " and click the " OK ».

Next, place the cursor on the page from which the book format will again appear, and do the same. Just select " Orientation » — « TOlower " And in the section " Sample" in the window " Apply" set also "to the end of the document".

As you can see, nothing complicated.

The same can be done in a text editor Word 2007/2010. To do this, open the menu Page layout and to the right of the block name Page Options Click on the little black arrow. A window will open Page Options .

Do everything else in the same way as described above.

This is how you can make a landscape page in Word in the middle of a document .

If you have Word 2007 or 2010 installed, you can watch a video tutorial on changing the page orientation:

Setting the sheet orientation to landscape is one of the most common tasks that users encounter when working with the Word text editor. In some cases, you need to change the orientation of sheets for the entire document, and in others only for one or a few pages. If you are also faced with a similar problem, then this article will be useful to you. Here you can learn how to make a landscape sheet in Word 2003, 2007, 2010, 2013 and 2016. We will also tell you how to make a landscape sheet for only one page of a document.

If you want to make a landscape sheet in Word 2003, then to do this you need to open the “File” menu and select “Page Setup” there.

This will open the Page Setup window. Here you need to select the “Landscape” sheet orientation and click on the “Ok” button.

This way you can make landscape sheets throughout your Word 2003 document.

How to make a landscape sheet in Word 2007, 2010, 2013 and 2016

Word 2007, as well as more modern versions of this text editor, uses the so-called ribbon interface. This is an interface in which all the tools are distributed into several tabs.

Therefore, if you use a modern version of the Word text editor, namely Word 2007, 2010, 2013 and 2016, then in order to make a landscape sheet you need to perform slightly different operations. To get started, you need to go to the “Page Layout” tab. All the main tools designed to control the appearance of the page are displayed here. Among other things, there is an “Orientation” button, by clicking on which you can choose one of two options: “Portrait” or “Landscape”.

By selecting the “Landscape” option, you will convert all sheets of the Word 2007 (or 2010, 2013, 2016) document to landscape orientation.

How to make a landscape sheet in Word only one page

If you want, it will be a little more complicated than converting the entire document to landscape orientation. After all, this will require dividing the document into sections. Below we will demonstrate how this is done using the ribbon interface of Word 2007, 2010, 2013 and 2016 as an example. But, these instructions will be useful even if you have Word 2003, since the same principle is used there.

So, first you need to enable the display of non-printable characters. This will make it much easier to work with sections.

The next step is to place section breaks. In order to make a landscape sheet in Word on only one page, you need to insert a so-called “Section Break” before this landscape page and after the landscape page.” To do this, place the cursor on the page that comes before the landscape one, go to the “Page Layout” tab, click on the “Breaks” button and select “Next Page”. Next, place the cursor at the end of the page that you want to make landscape, and again set the section break after the next page in the same way.

After that, place the cursor on the page that you want to make landscape and change its orientation to landscape.

If you did everything correctly, then you will receive a landscape sheet of only one page, and not the entire Word document. After this, you can turn off the display of non-printable characters and continue to work with the document as usual.

People are accustomed to preparing all office and work documents using Microsoft Word. Beginner users often wonder how to flip a sheet horizontally in Word. By default, the program produces vertical, or book, pages - long but narrow. Find out how to turn a page in different versions of Word.

How to make a landscape page in Word for the entire document

To print a wide table, chart, or insert an image, it is best to use a horizontal page view. For regular text, standard book format is suitable. To change the paper orientation, you do not need to install additional editors or programs, you just need to follow the steps and steps from the instructions below. It is important to remember that when using different versions of the program, you should use different sequences and algorithms. Learn step by step how to create landscape orientation in Word.

In Word 2003

The oldest, but still no less popular version of the text editor does not differ in functionality from the newest ones. Additional options, new fonts and beautiful design are added every year, but the base remains unchanged. The position of the document is one of the main criteria of the editor. How to make a landscape sheet in Word 2003? Making these changes is easy and simple, you just need to remember the algorithm once:

Open the File tab. To find it, look at the upper left corner.
In the menu that opens, find and click “Page Options”.
On the “Page Orientation” line, select the icon depicting the desired orientation.
Using the same menu, you can return the classic page position.

For Word 2007

The algorithm is simple:

Since you can make a landscape sheet in Word only using the menu, you need to expand the “Page Layout” column in the top menu bar.
The word “Orientation” will be located on the bottom line; it should be the leftmost one. You have to click on it.
Two items will open: “Portrait” and “Landscape”. Once selected, you can change the layout of the pages of the entire document.

In Word 2010

The new and latest versions of the Word program are not very different from the seven: the design has changed a little, the color scheme has changed, but the functionality meets the highest requirements. Changing the position of the sheet using the tenth year version is as simple as in older ones. To do this you need:

On the Navigation Panel, select “Page Layout”.
Among all the functions: theme, color, effects, margins, size, background, border color, line numbers, breaks and others - you need to find “Orientation”. It will be closer to the left edge, but you shouldn't look for it by looking at the corner of the menu.
After clicking on this button, you should choose from two options that appear: “Portrait” or “Landscape”. The first is vertical, and the second is horizontal. After these simple steps, the document will acquire the desired appearance, and placing the necessary information will become much easier.

How to make one page in Word landscape

If you have figured out how to turn a vertical sheet into a landscape one, all that remains is to learn the last secret, how to delimit each page and give it its own arrangement. You can set a new sheet to have a different orientation than its neighbors. Here are the steps to take:

We need to make it active. To do this, you just need to place the cursor on this sheet, highlighting any line or word.
Open the familiar “Page Layout” tab.
On the expanded window, among all the options, you need to click on the small “expanding” arrow - “Page Options”. It will be in the lower right corner.
The characteristics window appears. Mark the desired location.
For the bottom column “Apply” you need to select “until the end of the document”.
Click "OK".
After this, all pages, starting with the selected one, will change orientation.
To make only one sheet horizontal, you must continue to follow these instructions.
Make the next sheet from the document active. And do all steps two through six, only changing from landscape to portrait, and not vice versa, as you did from the very beginning.
As a result, only one page stands out from the crowd.

When working in the MS Word editor, you often need to make a landscape sheet in Word. Sometimes in landscape format you need to type the entire document, and sometimes you only need to type one page while the rest of the document remains in portrait orientation.

This article will tell you how to make a landscape sheet in Word.

How to make a landscape sheet in Word

In order to make our sheet landscape, you need to open the document and go to the "Page Layout" tab. Here you need to click on “Page Orientation” and select the “Landscape” view in the settings.

One landscape page in word

The page becomes like a landscape sheet. Although sometimes, simply clicking "orientation" is not enough. Then we place the cursor on the page that is in front of the page where you want to make the landscape.

Go to the "Page Layout" tab, click the settings page button, it is located in the "Page Settings" block. If you need the next page of the document to be in landscape orientation, then click the “Landscape” button. Then in the settings, “Page Settings” you need to open the menu and click “Apply to the end of the document.

Then close the window. As a result, all pages that follow later will switch to landscape view. To change them back to portrait orientation, place your cursor on the next page and open the Page Setup menu, select "Portrait Orientation" and apply it to "end of document." As a result, you will get a text document in which one sheet is in landscape orientation, and all the rest are in portrait mode. You can also make a “landscape” sheet in Word, using “section breaks”. To make it easier to work with section breaks, turn on non-printable characters.

To make a page landscape in Word, you need to set a "section break" on the previous page, and at the end of this page. To do this, place the cursor on the page that arrives in front of the one that should be in landscape orientation. Then open the "Page Layout" item, click the "Next" button. After this, place the cursor at the bottom of the page, which should be in landscape view, and re-set the “section break” on the next page. Afterwards, you can change the page orientation to landscape. Now you know how to make a landscape page in Word .