• How to read mms on android. Reasons for not sending MMS from Android to Tele2

    After purchasing a new smartphone, the user may wonder how to set up MMS on MTS. This service allows you to exchange not only text messages, but also music, pictures and videos. However, to use it on an iPhone 6 or a smartphone with the Android system, you will need the appropriate settings.

    If the network data is entered incorrectly, the subscriber will not be able to receive multimedia messages. They will be saved in the gallery. The message will only contain a link to go to this operator’s resource.

    How to set up Internet access to send MMS

    Internet access is required to exchange multimedia messages. For most MTS subscribers (MTS Russia, MTS Crimea), the Mobile Internet service is automatically activated on their phone. If this does not happen and the network is not available, there are four options.

    1. Managing services in your personal account. Go to the page where the available options are displayed. Connect to Mobile Internet.
    2. USSD command. To activate the service from your device, you need to dial the combination *111*18# “Call”.
    3. SMS message. To 111 send 2122.
    4. “My MTS” is an application from the operator.

    Important: connection to the Mobile Internet service is free.

    How to order settings for your device

    As soon as the device is registered on the network for the first time, the question of how to set up MMS on MTS is resolved by itself. The user is sent a service message with settings that need to be saved. Next, all parameters on an “Apple device”, for example, an iPhone 6, or on an Android smartphone, are entered automatically.

    If this does not happen, settings can be ordered. To do this you need:

    • send an empty message to number 1234;
    • call toll free number 0876;
    • go to the website www.mts.ru.

    To order settings for free on the operator’s website, first indicate your region on the main page. In the tab "Mobile Internet" you need to find the item “Support”.

    In response to requests (via a form on the official website, a message or a USSD command), the client is sent the parameters necessary for exchanging MMS. The received notification should be saved and the device rebooted. To activate the service, an MMS text must be sent to 8890.

    Another option to set up MMS on MTS is to contact the nearest operator’s office. There, a trained consultant will enter all the necessary parameters into the device menu.

    How to set up MMS on MTS if all attempts have been unsuccessful and it is not possible to visit a communication salon? All that remains is to enter the parameters manually through the device menu. The progress of the operation may differ depending on the operating system: on iPhone 6, feature phone or Android system.

    Correcting data on iPhone 6

    To send and receive MMS on iPhone 6, the user needs to go from the main page to the following menu items: “Settings”, then “Cellular” and "Cellular data network".

    Then enter the following parameters:

    • in the line with the user name - mts, the same in the password field;
    • APN – mms.mts.ru;
    • as the start page – http://mmsc;
    • MMS proxy – 192.168.192.192:8080;
    • message size limit is limited to 512000.

    As in the case of ordering parameters from an operator, to activate the service on iPhone 6, an MMS text is sent to 8890.

    How to send MMS messages on Android OS

    To enter the correct network data on the Android OS, you need to go to the following menu items: from the settings section to "Wireless communication", then “Access points” and “Create APN”. Fill in the fields that open.

    1. The title is MTS MMS Center.
    2. Enter mts in the username and password lines.
    3. Access point – mms.mts.ru.
    4. The home page is http://mmsc.
    5. Proxy – 192.168.192.192.
    6. MMS Port –
    7. Protocol MMS – WAP 0
    8. MCC 250, MNC 01, type APN – mts.

    The Android operating system is popular among users. Such smartphones are easy to use and available at a relatively low price.

    How to enter network data on a feature phone

    Sending MMS messages is also possible on a regular phone. In your device, from the main menu you need to go to the settings section, then find a link there to create a new access point.

    In the network parameters on the phone, enter the following data:

    • the name for the profile is set to MTS MMS;
    • home page address – http://mmsc;
    • channel – GPRS;
    • mts is specified as the username and password;
    • APN: mms.mts.ru;
    • IP address enter 192.168.192.192;
    • The information in the WAP port line depends on the model: if WAP version 2 is supported, enter 8080. For devices that work with WAP version 1, enter 9201.

    Important: V Depending on the model, the names of the parameters on the phone may vary, for example, password/password or APN/access point.

    Algorithm for sending and receiving multimedia messages

    When the question of how to set up MMS on MTS is resolved, all that remains is to figure out how to send them. To do this, you need to go to the messages section and create a new one.

    To turn a regular SMS into a multimedia message, just add a photo, video or melody to the text. If the volume goes beyond the set limit, the device scales the contents and brings them to the optimal size.

    When everything is ready, all that remains is to select the recipient from the contact list or enter the number in the appropriate line. After clicking the “Send” button, MMS messages are sent to the recipient.

    Important: When sending an MMS message, the recipient's number must be entered with the country code +7.

    You should set the option to automatically receive MMS on your phone. To read a received message, you only need to open it.

    If this checkbox is not checked, before opening the files you need to click on the “Extract” button. The attachment will then be available for viewing.

    Before setting up MMS on MTS, you need to make sure that the device supports this function. Otherwise, the subscriber will only receive an SMS with a link to the gallery. To read the message there, you will need to enter a password.

    Why are MMS not sent from Tele2? There may be several reasons. As a general rule, the service is activated automatically and free of charge for Tele2 subscribers; you do not need to take any action to do this - just insert a SIM card into your smartphone. But often users have problems sending such messages. We offer a list of the most popular problems that arise, as well as ways to solve them.

    Briefly on the topic

    Most often, problems sending messages are associated with a failure in the settings or incorrect Internet settings. To solve these problems, you need to check all the settings or call 679

    Problem #1

    The service settings have disappeared or are missing altogether:
    Perhaps the most common reason why MMS does not work on Tele2. Most relevant for owners of so-called “outdated” phones. What to do in this case?

    • Make a call to number 679 and request the correct working parameters. They will come to your mobile phone, and you just need to apply them.
    • Alternatively, call the operator at 611 . But the first option is preferable.
    • You can also debug the service for sending and receiving multimedia yourself. Go to the settings of your phone/smartphone and fill in the fields by analogy:

    You will find information on how to connect MMS in Tele 2.

    Problem #2

    Incorrect Internet settings. Another reason why MMS does not load on Tele2. To solve this problem, the operator also offers several methods:

    • Order the correct parameters by calling 679 , similar to requesting settings for multimedia messages;
    • Through your personal account on the Tele2 website;

    • Or manually enter the following data into the settings of your communication device (they are the same for phone owners on any platform, be it Android, IOS, etc.)

    In case of failure, we advise you to follow the above instructions. Most problems can be resolved by following these simple steps. We also note that any service received is free. Tariffing is included only if a multimedia message is sent - its cost is 6.5 rubles (the price is indicated for Moscow and the Moscow region).

    MMS should have lost its former popularity. But this did not happen for various reasons: firstly, not all people have access to the Internet, and secondly, sending MMS messages is much faster than in some messenger.

    Advantages of MMS

    MMS on Android

    With the Android operating system, in most cases they support data transfer using MMS. You just need to configure it. You can change configurations on Android using automatic configuration, you can immediately contact your mobile operator, configure it manually, or order settings on the operator’s website.

    Automatic MMS setup

    This method is very convenient because the technology will do everything itself instead of the user. The likelihood of making a mistake or damaging your mobile device is close to zero. The only negative: you can use the automatic configuration only once (when registering for the first time in the mobile operator’s network). How to set up MMS automatically:

    1. Install a SIM card.
    2. Launch your mobile device and enter your PIN if prompted.
    3. Receive settings in the form of SMS messages from your mobile operator.
    4. Run the configuration and wait for the installation to complete.
    5. You can now read sent messages.

    Asking an operator for help

    Unlike the previous method, you can ask the operator for help an unlimited number of times. But here the user will have to strictly follow the instructions in order to achieve a positive result. Each mobile network operator has its own toll-free technical support number. You need to ask to send MMS settings to mobile phone number:

    • MTS – 0890;
    • Megafon – 0550;
    • Motive – 111;
    • Beeline - 0611.

    After ordering settings, you must accept them, and then reboot the device to start using and sending messages. It happens that the service does not connect the first time and requires additional activation. In this case, you need to call technical support again and ask to enable the service for this cell phone number. After all manipulations, graphic messages will be activated.

    Setting up MMS manually

    If it is impossible to get through to the operator, and the MMS service is needed any minute, then you will have to install it on your own. Instructions:

    The next steps vary by operator. Only some columns are the same for users of Beeline, Megafon, MTS, Tele 2, Motiv. This is the “access point type” - mms and the “MMS port” - 8080 (there is an alternative code 9201 for MTS and Tele 2 subscribers). Example of settings for the mobile operator Beeline.

    You can specify any username(use Latin characters). The access point is mms.beeline.ru. The login, or username, will be beeline and the password will match it (also beeline). In the MMSC column you should enter http://mms/. The IP address for this mobile operator is 192.168.094.023.

    You only need to enter the specified information and leave the rest of the columns unchanged. Afterwards, you only need to save the entered data and restart your mobile device.

    Order settings on the mobile operator website:

    1. Go to the mobile operator's website.
    2. Select the model of your cellular device from the list listed and enter your mobile phone number.
    3. Click "send".
    4. Over the course of some time, the phone will receive settings that will need to be installed.
    5. Reboot your device when installation is complete.

    If you are unable to achieve success, then the problem is most likely in the user’s actions or in the settings of the phone itself. If you fix the problem It is impossible to do this on your own, you should contact the service center of your mobile operator.

    Picture messages open in the same way as text ones. If the sent file is not displayed, you need to look at additional settings for receiving and sending MMS messages.

    Today, to send media files, users mainly prefer to choose email or social networks, for example, Odnoklassniki, VKontakte and others. But, in principle, there are still people of the old school who still want to work with MMS rather than with e-mail. Why, you ask? There are hundreds of answers: email can be hacked, it is difficult to register a mailbox for individuals, it is very difficult to remember your address rather than someone else's, you constantly forget your password and much more. In this case, we decided to describe in detail how to set up MMS on your Android and what is needed for this!

    In principle, the setup process is no different from previous generation devices, when we specified all the settings manually or automatically. We will describe all the methods for the main mobile operators.

    The article will contain the following operators:

    • Beeline;
    • Megaphone;
    • Tele2.

    Initially, you need to check whether the service is activated for your number at all or not, because in some regions, oddly enough, it is disabled for certain numbers. Call your operator's customer support center. All calls are free!

    At all, The easiest way is to call the same service center and ask the operator to send you the settings. In this case, all operations will be carried out automatically, and for MMS to work correctly you will only need to restart the device and use this technology to the fullest.

    Usually the operator is told the phone model, after which the settings are sent and saved automatically. But it often happens that the user needs to do everything manually.

    For Megafon

    If you have a SIM card from Megafon, then you will need to use the instructions described in this subtitle!

    Automatic setup. Send a free message without text to 5049. In a few minutes, a message will be automatically sent to your number with the necessary parameters specifically for your model. You need to save them and reboot your phone. After that, you can try sending MMS to your friends.

    Manual setting. In the Android operating system, go to “Settings”, select the “Wireless networks” tab and then “Mobile network”. Here you will need to click on the “Access Points” tab. Now carefully review what data must be filled in!

    Please note that all submitted data must be filled out exactly as described above. Each entry is written in a separate tab. You will see all these fields when you go to the “Access Points” item in the menu. Next, all you have to do is click the “Save” button, restart your phone and check the functionality of the MMS.

    For Beeline

    If you use a SIM card from Beeline, then you need to set up MMS based on the instructions in this subheading!

    Automatic. Call the toll-free number 06741015, after which all MMS parameters will be automatically sent to you. They can be saved directly in the dialog menu after opening the incoming SMS. Beeline also has the option of setting up this technology using your personal account.

    Manual. Go to “Settings”, select the “Wireless Networks” tab and go to “Mobile Network”, click on “Access Points”. Here you will need to specify settings specifically for Beeline! They will be as follows:

    For MTS

    If you use an MTS SIM card, then you need to perform the settings according to the instructions in this subheading.

    Automatic. It is necessary to send an SMS message with empty content to service number 1234, after which within a few minutes the subscriber will receive a response SMS from the operator with the settings for their device. You need to save them and restart the phone, after which you can send MMS. MMS setup is also available using the “Internet Assistant”, where each user independently manages the options on their phone.

    Manual. To manually configure, you need to go to “Settings”, then to “Wireless Networks”. Select “Mobile network” - “Access points” and enter the settings described below:

    Save all the specified parameters and reboot your phone.

    For Tele 2

    Despite the fact that Tele 2 has not been around for very long, you can also configure MMS for it, both on a regular device with support for Java applications, and on modern devices with Android and iOS.

    Manual setting. Go to the “Settings” menu item, then select “Wireless networks” and click “Mobile network”. Go to the “Access Points” tab and set the following parameters:

    Conclusions

    In general, we can conclude that setting up MMC on Android is not difficult, regardless of which operator you use. Just keep in mind that sending one MMS costs about 7 rubles, and this is not very profitable, given the capabilities of modern technologies that allow you to send high-quality media files completely free of charge.

    In the Android operating system, do not forget to activate the mobile network, because... It may be disabled by default! Attention! If you do not activate the mobile network, sending MMS will not be possible. To do this, go to the main menu “Settings” and select “Wireless Networks”. Click the “Mobile Network” tab and activate it.

    Also in Android OS, on the quick tabs panel, you can enable data transfer with one click.

    Read more: