How to put a protective glass on your phone. Necessary materials and tools. What to do if the glass glued to your smartphone comes off

How to stick glass on an iPhone?

Additional safety glass for the phone - this is a modern alternative to the usual films for screens. This accessory will protect your smartphone from all types of mechanical damage to the display (scratches, abrasions, cracks from dropping the device).

If you decide to purchase a protective glass for your iPhone, check out the basic tips for choosing this accessory:

The thickness of the glass determines the level of protection of the phone from falls and shocks;
select the type of glass - matte or glossy. The second option is cheaper. Glossy products protect the screen from impacts, but not from scratches;
Frosted glass completely protects your iPhone from bumps, abrasions, drops and glare.

Installing a protective accessory on your phone screen does not require special skills. Let's take a closer look at how to stick protective glass on an iPhone in a few simple steps.

Step 1: Clean the display

Bring workplace in order. Make sure there is no dust on the surface that could end up trapped under the film. Then open the package and place all the elements on a clean, flat surface.

Clean your smartphone screen using a cloth and glass cleaner. Carefully wipe the surface of the display and wait for it to dry completely. This action will remove even invisible dust particles. Try not to touch the iPhone screen directly anymore, so as not to create new stains and specks of dust. Wipes for initial cleaning of the phone are included with the protective glass.

Step 2: Unpack the protective glass

On next stage Unpack the accessory and prepare it to stick on your phone. Take the screen and peel off the protective layer, which, once glued, will be in contact with the phone's display. After removing the protective layer, try not to touch the protective glass, otherwise fingerprints will remain on the product.

Step 3. Gluing

Turn the protective glass over to the side that was removed from the film. Place the accessory above the smartphone screen without touching it. Try to match everything as evenly and accurately as possible to avoid uneven gluing.

Further action must be done very quickly. Gradually apply the glass to the iPhone display in the direction from the top of the case to the bottom. Release the film so that the side sections stick to the phone themselves. By cleaning the display well, bubbles will not form.

Step 4. Smoothing the surface

Users do not always know how to stick glass on an iPhone. As a result, the result may not be ideal. To remove small bumps or air trapped inside, take a piece of microfiber (included with the glass) or a clean cloth and gently wipe the phone, moving from the center of the display to the sides, pressing lightly. In this way, flaws can be eliminated.

A film is also glued to the outside of the protective glass. Remove it immediately after all defects have been eliminated. Now turn on the device and check the responsiveness of the sensor. Normally, the additional screen should not affect the smartphone in any way.

Eliminating errors

If too many dust particles and dirt get under the protective glass during gluing, it will be inconvenient to use the smartphone. The sensor may respond less well to touches, and appearance such a phone will not be the best. Many users are wondering how to re-glue the glass on an iPhone and is it possible to do it at all? Yes, you can.

If the accessory does not stick properly the first time, carefully remove it from the display and set it aside on a clean surface. Thoroughly wipe the iPhone screen again and make sure there is no more dust or dirt on it. Only after cleaning the screen, stick the glass again. There is no need to peel off the accessory anymore.

How to remove glass from iPhone?

As a rule, users only need to remove the protective glass in one case - when it breaks during a fall or impact. It is very important to remove the accessory correctly so as not to damage the main display of the smartphone with fragments.

Take a plastic card and use it to pry the edge of the protective glass. Then slide the card under the glass until it is completely removed. This method allows you to create some kind of barrier while waiting for the display and a damaged protective accessory.

Any DIY instructions iPhone repair You can find it on our website, or call a specialist for to any place convenient for you.

A smartphone is an expensive thing. Even when purchasing a budget-class device from 5 to 15 thousand rubles, we want it to serve for a long time and faithfully. The fidelity of the gadget, in turn, depends on two parameters: internal and external. And if we cannot influence the first one (represented by the hardware), then we can overcome external factors We just can do it. We can protect our smartphone, if not from drowning, then certainly from mechanical impact. And the glass on the phone will help us with this. How to glue it? This is what we will talk about today.

Why do you need protective glass?

It is difficult to disagree with the fact that prolonged use of any smartphone does not imply the appearance of chips, cracks, scratches, or abrasions. This fate is typical not only for the side edges, top and bottom ends and back panel, but also for the front part. And there is located almost the most important element- smartphone screen. Protective glasses were invented precisely to protect the display of the device. You can also use film, but it has a lower protection factor. In any case, it is important to know how to properly glue protective glass to your phone.

What does it represent?

The appearance of the protective glass is similar to the exterior of the film. Indeed, the tasks of these two elements are similar to each other. However, it is rightfully considered to be a more reliable component, since it has a higher density compared to film. In addition, it is transparent and flexible, and this also has a certain importance. Of course, it will cost more than film. However, it is worth it, especially in cases where there is either a high probability of mechanical impact, or when the gadget is truly expensive. This level is different for everyone, but most users prefer to buy glass if their devices cost more than 10-15 thousand rubles. By purchasing, the user reduces the likelihood of damage to the main screen to almost zero, since the component described above will take the entire blow. Before we talk about how to glue it to a phone, I would like to focus on the advantages of the element.

Functions and useful properties

Not much can be said about the functions of protective glass. From its name it is clear why it was developed and what it is intended for. Either it’s a matter of features that you can talk about for hours. Their list, for example, includes resistance to scratches and other similar damage. Someone may doubt this parameter, but usually all doubts disappear after a demonstration test. For this you can use ordinary keys. Run the sharpened edges across the glass and you will see that it really doesn't leave marks.

Second useful property The protective glass is shock absorbent. We have already mentioned this briefly above. A large number of smartphones, when dropped with the surface of the screen downwards, receive physical damage, up to the complete breaking of the display. With protective glass, this problem will be solved, since instead of the screen it will break. By the way, the word “break” here should also be understood a little differently from its usual meaning. The shards from the telephone protective glass do not scatter to the sides. Finally, we can note the fact that the glass holds very, very reliably. Especially if we compare it with a simplified element - film. Users who so often ask questions about how to properly glue glass to a phone can be glad to know that this operation does not require any special experience.

We are considering the package

Very large number queries are related specifically to how to glue the film (glass) to the iPhone 6 phone. However, it should be understood that the process is generally similar for other devices. Why then dwell on specific models if the operation can be described universally? First of all, let's see what is included in the package with protective glass? Various manufacturers They offer different equipment, but usually there is the glass itself, an alcohol wipe and a cloth made of a special material. If there is no cloth or napkin, then you can use improvised analogues, this is not important.

Glass on a phone: how to glue it? Preparing the surface

If you have previously installed film or glass, these components will need to be removed. To do this, remove the cover, if there is one, then hook the element by the edge. To prevent the appearance greasy stains on glass, you should thoroughly wash your hands and dry them beforehand. By the way, preparing the workplace remains an important step. You need a flat horizontal surface and powerful lighting. This could be, for example, a table. Lighting will help avoid the occurrence of unnoticed stains and dusty areas. So what does it take to integrate glass on your phone? How to glue it? The operation will only be correct if the “bare” screen is treated in advance.

Why is cleaning necessary?

The screen, freed from film or glass, should be cleaned with a damp disc or alcohol wipe soaked in alcohol. The screen should be wiped thoroughly to ensure that no dirt remains on it. After this, you should wipe it with a special cloth, if it is included in the kit. If it is not there, then you need to find an analogue. Now it's time to put the glass on the phone. How to glue? Let's find out further.

The most important stage

There is a special film on the adhesive side of the glass. It needs to be removed. After this, we apply the glass itself to the screen. Care should be taken to ensure that it is aligned with the edges of the device and aligned with the speaker and control elements. By the way, you need to remember that you can only hold the protective glass by the edges. Only in this case there will be no traces after the operation. When the fit is complete, simply lower the component onto the screen. The glass will stick on its own. Great, now we know how to glue glass to a phone.

Are there any disadvantages

Yes, like other elements, protective glass has some disadvantages. Some users who are interested in the topic may think that the main disadvantage is the indicative complexity of the integration process. Like, if you stick it wrong the first time, then you can’t do anything later. In fact, this is not what we are talking about now. The main disadvantage of this component is the fact that the device on which you will glue it will become bulkier and heavier. However, if this does not bother you, and you are not very sensitive to the weight and dimensions of the phone, but want to protect it, then you can contact the salons cellular communication. They will offer not only the best products, but for additional money they will be able to glue glass with high quality.

Pitfalls and tricks

Most users are afraid of air bubbles. Or rather, they will remain. Few people can boast that they glue the protective glass carefully the first time, and there are no bubbles. However, they can be easily dealt with with a dry cloth. The procedure is terribly simple: we simply squeeze out the bubbles from the center to the periphery. The ability to glue protective glass will save money, which is charged for this procedure in mobile phone stores.

Prices

Nowadays, safety glasses are quite important and common accessories. Therefore, a large number of companies are engaged in their production. Budget options are presented mainly by Chinese companies, as one might expect. However, they are not that bad. Glass from different brands differs from each other only in the degree of hardening. However, one should not think that glass is from Chinese company will not provide the required degree of security. Now that we have learned how to glue tempered glass on your phone, you can move from words to action.

Technological progress does not stand still: telephones, which previously could only make calls, today combine a huge number of functions without which we can no longer imagine our lives. A huge variety of accessories are sold for our “favorites”: cases, protective glasses and films, plugs for the headphone slot, pendants - it’s too much to list. Some of this is just decoration, some is a necessity. The latter also includes protective glass for your phone. How to glue and what functions does it perform? And is it really necessary?

Why is it necessary?

Before you figure out how to properly glue the protective glass onto your phone, it’s worth understanding why it’s even needed. In terms of its functions, glass is the same as film, but the latter can only protect the screen from scratches; in the event of a fall, the probability of a happy outcome is very small. Those glasses that are widely available are tempered, so that if the phone is in danger of being broken, it will take the entire blow.

It may crack, individual pieces may break off, but otherwise everything will be fine - replacing it is much cheaper than the entire display. There is another type of protection, currently available only in China - liquid glass. It is applied to the screen like a regular varnish, and after drying, according to the manufacturers, it will be able to protect the screen from water. In fact, such a coating increases the sensitivity of the sensor and also visually increases the brightness of the display, but does not perform any protective functions at all. This type of protection is not visible on the display. That's why everything more people Today people are wondering how to glue protective glass onto a phone, iPhone, or device from any other company in order to save money on repairs.

Where to glue?

So, how to glue protective glass to your phone screen? Firstly, it is better not to improvise, but to follow the instructions on the package. In addition, often in places where such accessories are sold, stickers are offered as additional service(for a certain fee most often). If you decide that this is too simple, then proceed to gluing yourself.

Required Equipment

So, we have a protective glass for the phone. How to glue it yourself? First, you need to stock up on everything you need for this simple operation. The glass set includes wet and dry wipes - one degreases the surface, and the other removes dust and small debris from it.

You will also need tape or adhesive tape to remove dust; they can also be used to pre-fix the glass, adjusting it to a specific smartphone (most often the glass is universal, so it will also need to be correctly positioned on the display, taking into account the features of a particular model).

Preparing the display

How to glue protective glass on a Samsung phone, iPhone, Lenovo and others? Before starting work, you need to wash your hands with soap - this will help get rid of excess fat. In addition, you need to clear your workspace.

Next, the display is degreased (to do this, you need to use one of the napkins from the kit, but if there are none, just moisten a cotton pad with alcohol or perfume) - you need to wipe it very carefully, without leaving a single streak. Excess alcohol is removed with a dry cloth, dust particles are also wiped off (the most persistent ones will have to be removed with tape, simply pressing it to the dusty place) and the remaining stains are wiped off.

And gluing

So, we have prepared the display. How do you glue the protective glass onto your phone? First, if it is dirty, it is wiped off in the same way as the display. After this, you must, holding the glass by the edges so that it does not get dirty again, remove the film covering the adhesive layer from it.

Holding the glass as close to the screen as possible, you should find the optimal position for it (you need to align it with the main button and speaker), and you can help yourself with the help of narrow strips of adhesive tape that can be glued along the intended border of the glass. Once the correct position is selected, the glass is pressed against the display.

Troubleshooting

So, we figured out how to glue protective glass to a Lenovo phone or any other smartphone. But what to do if there is an air bubble underneath? In this case, you need to press the cloth tightly against the glass and move it up and down, as if squeezing out excess air. As for dust, which can also get underneath it, something flat (for example, credit card) pick up the edge of the glass, and then carefully remove it.

If you remove it too quickly and without special care, you can damage the plastic as well as the adhesive layer, which means you will have to buy a new one in any case. Having removed it and holding it with the adhesive side down (if you turn the glass over, dust and debris will instantly attach to the glue, and cleaning it is not at all easy), you need to wipe the display from any debris (you can also use tape, small pieces of which can easily remove dust), after which, following all the instructions, the glass is glued again.

Doesn't hold up!

But what should you do if you bought a protective glass for your phone, you know how to glue it, but it still doesn’t stick to the screen? In this case, there are two possible options for such “disobedience” of the accessory: either the protection and/or display were poorly prepared (it is clear that in this case you will have to repeat the entire operation, strictly following the instructions), or the glass does not fit on specific model smartphone and does not stick due to the fact that its edges touch the protruding parts of the phone (the same start button).

In any case, if for some reason it does not stick immediately or comes off, you need to start all over again, try again, and then, in case of failure, if possible, consult with a specialist who can point out errors, if any. There is.

Conclusion

So, protective glass is not just an alternative to film. It will not allow the display to break if dropped even from a height of human height - the protection itself may crack, but the main thing is that the smartphone will not be damaged. Special tests were carried out which showed that the protective glass would not withstand anything other than a direct blow with a hammer - but a collision with such force is very unlikely in real life. Replacing the entire display (and most often it is this that is replaced, since it is usually impossible to separate the glass and the sensor itself) will cost almost half the cost of the phone, while the protective glass is several times cheaper, and you can replace it yourself without overpaying specialists. Therefore, to avoid disappointment, use this type of protection, which will save your smartphone and your nerves.

Screen protection is one of the main conditions for the durability of any modern smartphone with touch screen. Due to the fact that the fragile surface may not survive a fall even from a small height, it is better to purchase a suitable coating immediately after purchasing the phone. Thanks to ease of use, the most optimal choice It is glass, since films serve more of a cosmetic function and protect only from scratches, so now we will tell you how to stick protective glass on your phone yourself.

Preparatory operations

First of all, you should make sure that the room in which the operation will be performed will be very clean. Even those specks of dust that are suspended in the air can interfere with the successful completion of the procedure. Clinging to the statically magnetized surface of the glass, they will provoke the appearance of air bubbles on its surface, which will be impossible to expel from under it.

Therefore, it is worth doing a few simple things:

Scissors – useful for cutting tape.
Any bank card or similar flat thing wide enough to span the entire width of the screen.
A cloth is usually included with the glass itself, but it would be a good idea to prepare your own, preferably made of microfiber so that it absorbs liquids well.
Scotch tape - for eliminating minor defects.
Alcohol or other volatile liquid that can quickly degrease the screen surface.

When everything is ready, you can start gluing. It won't take much time if you do everything according to the instructions right away.

It is worth noting that the preparatory stage is practically the main component of the entire process. Step by step it looks like this:

Degrease the surface. This is a mandatory procedure; any foreign stain will prevent the two flat parts from adhering well.
After treating with the product, you need to wipe the entire surface of the screen dry. In this case, you will have to make sure that no dust flakes get on it.
Take the glass and remove it from one of its sides protective film. The stickers on the edges should tell you which side to use - you need to remove the one that is either indicated by the screen icon or the number “1”.
Match all the cutouts on the glass with the corresponding ones on the screen. Lean it against one of the edges, preferably the bottom or top.
Gently lower the glass and let it stick to the surface. This process will be visible, it resembles a wave spreading across the screen.

After the protective glass has stuck, carefully examine the resulting result. There should be no bubbles on the surface of the display. If something goes wrong and they are still there, you need to take a card or other flat object and expel the air outside the screen. This may not work if there is a speck of dust inside the bubble. Then you will have to peel off the glass partially and remove the piece with tape. For this it is better to use a regular transparent one. It will not damage the adhesive structure of the surface.

Video instructions for glueing the protective glass correctly and without bubbles

Having picked up a brand new, cutting-edge smartphone for the first time, the new owner of a convenient, functional communication device understands: the display is the most vulnerable area. But it is he who is the main center of communication between the device and the user. How to protect the display from mechanical damage? If we are talking about a smartphone, for example Xperia, experts do not recommend gluing the film for the reason that the vast majority of models modern smartphones You can purchase special protective glass. Currently, many variations of this accessory are presented in abundance on the most advanced trading platforms.

As practice shows, no matter how reliable the standard smartphone display glass is, extra protection will not hurt it. Accidental impacts and falls, active use, carrying the device in a pocket or bag - all this will invariably lead to scuffs and cracks appearing on the glass.

Protective glass, the thickness of which varies from 0.2 to 0.3 mm, consists of five layers:
Oleophobic layer. Allows your finger to glide across the screen freely and smoothly. The layer effectively repels moisture. Fingerprints can be easily removed with an ordinary cloth.
Protective layer (hardness 9H). Gives glass resistance to mechanical stress (impacts, scratches).
Anti-blocking layer - prevents the screen from fading.
The so-called containment layer. Even if you somehow manage to break the screen, this layer will prevent it from falling into pieces.
Silicone base. Reliably fixes the protective glass on the screen.

The process of sticking such a protective glass onto the smartphone screen is very simple; you just need to follow the recommendations specified in the instructions. Usually, the protective glass kit includes everything necessary to fix it on the smartphone screen:
cloth for pre-cleaning glass;
wet and dry wipes for degreasing and wiping;
adhesive strip designed to remove settled dust;
a couple of small adhesive strips to properly fix the glass on the device display.

The protective glass is glued to the smartphone very quickly. To do this, you just need to use all the materials at hand for their intended purpose, following the instructions exactly. If during the process of attaching the protective glass an air bubble has formed under it, you just need to gently push it with your finger, move it to the edge and remove it.

We invite you to watch the video instructions on how to stick protective glass on a smartphone, using the example