• How to check iPhone IMEI? Check iPhone activation by IMEI. How to find out the activation date of iPad (iPhone, iPod)

    You don’t have to worry about whether the iPhone is genuine if the device is purchased at a hardware store or at one of the offices of cellular networks, such as MTS or Svyaznoy. But if you intend to order an iPhone via the Internet (for example, from a Chinese store) or buy a gadget “from hand”, you need to be careful and insist on preliminary verification of the authenticity of the gadget via the Internet.

    This method is the most suitable, because to use it you don’t even need to open the box and take out the device itself. Follow the instructions:

    Step 1. Find the serial number of the device on the packaging - it should be located on the back of the box between the IMEI and the part number (Part No.). The serial number consists of 11 or 12 characters (numbers and letters).

    Source: cheerfuleboway.tumblr.com

    If the iPhone is printed and activated, check the “serial numbers” on the packaging and in the device settings (path “ Settings» — « Basic» — « About this device»).

    If you are interested in the question of how to find out the release date of an iPhone, this article will be a good guide. This question is usually asked by those who purchased an iPhone secondhand. It is important to find out when it was manufactured, as well as when it was activated.

    It is also necessary to be able to distinguish a real smartphone from a Chinese counterfeit. Sometimes it is absolutely impossible to do this externally. In order to obtain the information we need, a serial number is required. We will tell you how to find it out and how to see the activation date of the device, as well as its production.

    How to find out the activation date of an iPhone of any model

    The activation date is needed for more than just knowing when the user purchased it. With its help, we will determine whether the iPhone is under warranty or no longer. Lack of warranty can sometimes be a reason to refuse a purchase. Time of use is like mileage on a car: the device also wears out over time.

    Finding out the iPhone serial number in iTunes

    So, it's time to find out the serial number. The first method is to connect to iTunes. If you have never done this before, you need to download/install the latest version of this program and connect the device using the original cable. We connect, launch, look: in the “Review” tab there is data on the serial number. Let's copy it.

    Increase

    Find out the serial number on the iPhone itself

    We need to go to the main settings of the iPhone and select the "About this device" tab. Information about your iPhone will appear there. There will also be a serial number. Hold your finger on it and copy.

    Increase

    We receive information about the release date

    It doesn’t matter from which device you access the Internet. You will need to follow this link. In a special window you must enter the device number. Then you will see one of the messages:

    1. If the warranty period has not expired, information about its expiration will appear. We subtract the year and get exact information on the date when the user purchased and activated the iPhone. Now we know exactly how long the iPhone was in constant use.
    2. If the warranty period has expired, you will have to take the former owner’s word for it. The only proof can be a receipt. But not everyone keeps receipts even for such expensive purchases if the warranty period has expired. The only thing we can do is find out the production date of the iPhone.

    How to find out the production date of an iPhone

    This is done quite simply: follow the link to a special service. We insert the serial number there. Press one button and all the data is in front of you. The year of production and week are displayed. That is, if we know both the activation date and the production date, we can find out how long the iPhone spent in warehouses. When there was no such service, decryption had to be done independently. There are instructions on the Internet on how to do this, there are special tables. But you won't need it.

    If your iPhone was purchased second-hand, then you will certainly be interested in date of its production. Firstly, sellers may deceive you in order to pass off an ancient device as a more recent one. Secondly, even if the iPhone looks great on the outside, this does not mean that it was not actively used. Please remember that the device's battery is designed to last 300 cycloV fully charged and discharged, after which it begins to gradually die. Therefore, knowing the age of your iPhone is very important.

    Well, if you bought your iPhone officially - in a store - then you will also be interested to know how long it was collecting dust in the warehouse, and then on the showroom shelf, wouldn’t it?

    Today we will tell you how to find out date of production and activation of the device. To do this, you do not need to know any additional information other than the iPhone serial number. By the way, everything written below is also relevant for the iPod Touch.

    For those who have not held an iPhone in their hands, but really want to buy it, we explain how to find out the iPhone serial number right when purchasing. Find a silver icon on one of the device’s desktops "Settings" and click on it:

    Scroll down and select the first item in the third section of settings - "Basic", click on it, then select the top item - "About the device". Scroll down to "Serial number" and you will see an 11-character code like:

    8892 9 KST4NS

    You and I are interested third, fourth and fifth digits this serial number. The third digit shows the year of production. 7 - 2007, 8 - 2008, etc.

    The fourth and fifth digits are the serial number of the week of production of the device. This number can range from 01 to 52.

    Now you can easily determine that an iPhone with the serial number given above was manufactured at 29th week 2009, i.e. during the period from July 13 to July 19.

    If you are interested, the first two digits of the serial number are the identifier of the plant where the device was assembled, and the last six are a code unique to each device.

    For reference, here is the 2009 calendar with week numbers:

    That's not all. By serial number you can also check iPhone legality. Go to https://selfsolve.apple.com/GetWarranty.do and enter the serial number. The location you choose in the list below does not play a special role.

    You will see something like this:

    Follow the link See full coverage details:

    Pay attention to the inscription Estimated Expiration Date: September 12, 2010. This means that the iPhone was first activated in the store on September 12, 2009, and the one-year warranty countdown began from this date.

    If the iPhone has never been activated, which is quite possible if it is locked, then you will see an error like Please activate your iPhone. We are unable to display coverage details because your iPhone has not been activated.

    Good luck with your iPhone purchases and no less successful use of it;) Don’t let the sellers deceive you.

    Often, having purchased an iPhone, be it a smartphone or a gadget, the new owner tries to turn it on. But that was not the case! For some reason the device does not want to turn on. Don't worry: this means that it requires activation, without which its full operation is impossible. But the opposite situation also happens, when the activation period has already expired. Therefore, when buying used tablets and smartphones, be sure to pay attention to this nuance. Let's look at this question in more detail - how to check the activation date of an iPhone?

    Not only the service life of the device, but also the date of its warranty service depends on the activation date. The process of checking the activation date does not have any complicated steps. If desired, each person can find out the activation date of their iPhone.

    But before that, you should find out its unique number - IMEI, which can be determined using one of the methods described below:

    1. Remove the SIM card from the device (for iPhone 3G - 4S models) - the IMEI data is located on the tray.
    2. IMEI can be seen on the back cover (for iPhone 5 - 5S, iPhone 6 - 6 Plus models). The second line is the IMEI.
    3. Remove the SIM card from the device (for iPhone 6S - 6S Plus, iPhone 7 - 7 Plus models) - the IMEI data is on the tray.
    4. Using a special iTunes program. If the device is in working condition, then connect it to the program, go to the main page of the application and open the line under the device information.
    5. If the device is working, you can find out the IMEI by dialing *#06#. The resulting set of 15 digits is what we needed.
    6. Open the “Settings” tab, and from there go to the “General” section. We find the “About the device” section, where the IMEI is stored.

    How to find out iPhone activation date

    The iPhone activation date is determined through the Apple website. Just go to the company's website and enter the IMEI.

    It should be said that the iPhone, like other models (iPod, iPad), can be checked for the activation date not only in printed packaging, but also in sealed packaging, without violating its integrity.

    Checking the iPhone activation date by IMEI through the Apple website has one advantage - it does not require special programs such as iTunes. The verification takes place directly on the Apple website using a PC or other mobile device, such as a tablet or phone, that connects to the Internet.

    So, go to the Apple website and select the “Support” section. Scroll down the page. We need the “Other Resources” subsection, in which we need to open “Checking the right to service and technical support.”

    A verification panel will open, in which we enter the IMEI of your device and click on the “Continue” button.

    If the combination of IMEI numbers and letters was entered without errors, the name and model of your device will appear. The fact that the site recognized your purchase also points to another important nuance: your device is not a fake!

    So, among all the useful information about your device, you can see the IMEI and warranty status of the model. If there is no warranty information on the website, it means that the device has never been activated, that is, it has not yet been used. It is in such cases that the site displays: “You need to confirm the date of purchase of the product.”

    If the site displays information that the date has been confirmed and “Technical support by phone” is still relevant, then the activation date of your device is no more than three months.

    If you see information that the telephone support period has expired, the expiration date for warranty service and repair of the device will be indicated below. It is necessary to calculate exactly a year from this date and we will get the exact date of activation of the device.



    If the text indicates that the right to service has expired, it means that the device was activated more than a year ago.

    After purchasing an iPad in a store, the first thing you need to do is activate it. Without initial activation, the tablet simply will not work. Previously, activation was possible only using a PC (those were fun times), but now an activation option is available without a computer.

    In this article we will look at how to activate an iPad in two ways. We will also answer the question: how to find out the iPad activation date. The instructions are fully suitable for iPhone and iPod Touch, so owners of these gadgets can safely put them into practice.

    How to activate iPad

    Method 1. The most obvious and oldest method of activation is through a computer. This method worked with the first iPad and will work with the newfangled iPad Air and iPad Mini with Retina.

    1. To do this, first install the official application from Apple - iTunes (for Windows, in OS X iTunes is a built-in program).

    2. Connect the iPad to the computer via the cable supplied with the tablet.

    3. Press and hold the power button on the iPad (it is located on the top end) until a white apple appears on the screen.

    4. iTunes will launch and the iPad will be activated for the first time.

    Method 2. Activation directly from the tablet. For this method, you only need a Wi-Fi network with the Internet. It's much simpler than the first one. This feature became available with iOS 5.

    1. After unpacking the iPad, turn it on while holding the button (the Power button is on the top end).

    2. We act according to the instructions that will be shown on the screen. These instructions will include steps that will activate the iPad.

    This is called initial device setup. If you are not confident in your abilities and knowledge, then follow the instructions for Firmware for iPad to iOS9. Initial setup. The activation screen is not shown in those instructions, because I was flashing iOS 7 on an already activated tablet, but you will have it - don’t worry.

    How to find out when iPad is activated

    What is this for?

    1. You buy an iPad secondhand. Use these instructions to find out when your iPad was first activated. That is, the real “mileage” of the device.

    2. From the moment the device is activated, its warranty begins to apply. Not from the moment the tablet was delivered to the store, not from the moment of purchase, not from the moment you gave it as a gift, etc., namely from the moment the iPad was activated!

    So iPad activation date can be very important. In order to find out, we need the iPad serial number. You can find the iPad serial number in two ways.

    Method 1

    Connect iPad to computer. Launch iTunes. In iTunes, find your iPad and click on it. The Device Information (Overview) displays the Serial Number.

    In the menu you can select Edit->Copy serial number and this number will be on the clipboard.

    Method 2

    On iPad go to Settings->About this device. Among all the useful information there will be a serial number.

    If you hold your finger on it, you will be prompted to copy it to the clipboard.

    Next, we try to find the activation date using the serial number. We go to the Apple website using a special link. And paste the serial number into the empty field. Click the Check button.

    Now two situations are possible. If your warranty has not expired (that is, less than a year has passed since activation), then you will see this picture.

    The date in the screenshot, May 7, 2014, means that the product was activated on May 7, 2013, which is exactly one year before the specified date.

    If you see a picture like the one in the screenshot below, it means your iPad was activated more than a year ago.

    Should we be content with only this information? Not really. We can find out the production date by the serial number. But as practice shows, the production date may differ greatly from the activation date. The devices may lie in warehouses. But for general development, let's find out.

    How to find out the iPad production date

    There is a service on the network that, based on the serial number, will determine when and where the device was manufactured. .

    Read more: