• How to find out the serial number of the motherboard. How to Find the Serial Number of an Asus Motherboard Where is the serial number on an asus motherboard

    Sometimes you may need to find out the model of your computer's motherboard, for example, after reinstalling Windows to subsequently install drivers from the manufacturer's official website. This can be done either using the system’s built-in tools, including using the command line, or using third-party programs (or by looking at the motherboard itself).

    You can also use third-party programs that allow you to view information about the manufacturer and model of your motherboard. There are quite a lot of such programs (see), and the simplest ones, in my opinion, are Speccy and AIDA64 (the latter is paid, but also in the free version allows you to get the necessary information).

    Speccy

    When using Speccy, you will see information about the motherboard in the main program window in the “General Information” section; the corresponding data will be located in the “Motherboard” item.

    More detailed information about the motherboard can be found in the corresponding subsection “Motherboard”.

    You can download the Speccy program from the official website https://www.piriform.com/speccy (at the same time, on the download page, below, you can go to the Builds Page, where a portable version of the program is available that does not require installation on your computer).

    AIDA64

    The popular program for viewing computer and system characteristics AIDA64 is not free, but even a limited trial version allows you to view the manufacturer and model of the computer's motherboard.

    You can see all the necessary information immediately after starting the program in the “Motherboard” section.

    You can download the trial version of AIDA64 on the official download page https://www.aida64.com/downloads

    Visual inspection of the motherboard and search for its model

    And finally, another method in case your computer does not turn on, which does not allow you to find out the motherboard model using any of the methods described above. You can simply look at the motherboard by opening the system unit of the computer and pay attention to the largest markings, for example, the model on my motherboard is indicated as in the photo below.

    If there are no clear, easily identifiable model markings on the motherboard, try searching Google for those markings that you can find: with a high probability, you will be able to find what kind of motherboard it is.

    Whether you need to update drivers, check hardware compatibility, or are just curious, checking your motherboard number can be done with these simple tricks—it's easier than opening the case and searching for that coveted character set with a flashlight.

    Why do you need a motherboard number?

    Knowing your motherboard number important if you're thinking about updating drivers, buying new hardware (for example, you'll need to know the memory slot format), or just want to test your motherboard's capabilities if you're planning on upgrading your entire computer.

    If you have saved the documents that came with your computer (or individual components), you can often find this information there. But, even then, it's best to check to make sure the documentation is correct. Instead of opening the case and looking for the model number on the board itself, use tools in Windows to check the motherboard number.

    Check the number from the command line (or PowerShell)

    If you're comfortable using the command line (or PowerShell, where these commands also work), you can easily check various motherboards and hardware statistics using Windows Management Interface (WMIC), a command-line interface from Microsoft.

    With WMIC you can enter a query baseboard– to check motherboard statistics and then use additional modifiers: get Manufacturer, Model, Name, PartNumber, slotlayout, serialnumber, or poweredon– to get more detailed information about the motherboard.

    As an example, let's check the motherboard manufacturer, model number and serial number using WMIC.

    Open Command Prompt in Windows using the Run dialog box (Windows + R) or by searching for "cmd" in the Start menu—no need to run Command Prompt as an administrator. And as we already mentioned, you can also use PowerShell if you prefer. The commands work the same in both shells. At the command prompt, enter the following text (note that there are no spaces between the comma modifiers), and then press Enter:

    Wmic baseboard get product,Manufacturer,version,serialnumber

    The information received tells us that we are using a motherboard from ASUSTeK, PRIME X370-PRO board, and the serial number. That is, we received all the information we needed without opening the case or using any third-party tools.

    Checking Model Number Using Speccy

    If you prefer to use a GUI (this method also provides more information than the WMIC tool), you can download the free Speccy tool. This is a convenient application.

    After downloading and installing Speccy, launch it. You can see your motherboard's model number right on the summary page along with the current operating temperature (assuming your board is reporting this data). You can also see basic information about other system components.

    Click the Motherboard tab on the left to see even more information about your motherboard, including details about the chipset and voltages, as well as the types of slots included on the board, whether or not they are currently in use.

    1. I would be grateful to your site if you give me some advice how to find out the motherboard model And ? I bought the computer secondhand, and of course there was no box with drivers and instructions for the motherboard. I installed the Windows 7 operating system, immediately went to Device Manager and found many yellow circles with exclamation marks (devices for which drivers were not automatically installed). I know that there is a program called AIDA64 that can show all the devices installed in the system unit, but I don’t want to install it.
    2. Hello! Please tell me how to find out the name of the motherboard, I opened the side cover of the system unit, but there is no name on the motherboard? And is it possible to somehow find out the model of the monitor, there are no identification marks on it either.
    3. Explain how to determine the model of the motherboard of my laptop, should I not open it?
    4. . Evgen.

    How to find out your motherboard model

    Hello friends! Of course, this question will seem simple to an experienced user (for example, you can find out the model of the motherboard by simply typing the command wmic baseboard get product on the command line and the name of the motherboard will immediately appear),

    But believe me, even people involved in computer repair have had situations when they had to grunt and tinker, and even say a strong word, in attempts to determine whether the motherboard belongs to one or another manufacturer. And not always, when you open the cover of the system unit, you will see the inscription ASUS, GIGABYTE, ASROCK, MSI, sometimes there is simply nothing there to hint at the name of the motherboard. What about laptop owners?

    In our article we will tell you how very simply find out your motherboard model, video card, processor, monitor and almost everything that you have installed in your system unit.
    With this question, you can help in several ways. Firstly, you can open the cover of the system unit and see its full name on the motherboard itself, secondly, you can use the AIDA64 program, if you do not want to use this cool program, then in most cases you can find out the model of your motherboard on the website http://www .intel.com. So let's get started. With the computer turned off, open our system unit and see the model of our motherboard.

    If you don’t find any name there, but you still have a beautiful box from your motherboard, then the name can be seen on it. Maybe there is still an instruction manual, in it you can also find out the name of the main component of your system unit.

    If everything suggested above does not lead to success, then we use this method. Since most modern motherboards consist of a chipset (chipset) from Intel, the model of your motherboard can probably be found on the Intel website!
    Follow the link http://www.intel.com/support/ru/siu.htm Click on the button Identification of software and hardware on your computer.

    Your computer components are analyzed

    and here is all the information about the components installed in my computer

    SYSTEM BOARD INFORMATION
    Manufacturer ASUSTeK COMPUTER INC.
    Model P8Z77-V LX2

    Let's say the first two methods did not help us, then we use one good and very simple program. It is paid, but for the first 30 days of use it is free, as if allowing you to get to know yourself better before purchasing.

    Let's go to the website of the AIDA64 program at https://www.aida64.com/downloads/ , click on the button Download.

    Download the program in the installation file, click on AIDA64 Extreme Edition Trial version, self-installing EXE package, Download.

    Downloaded, run the file aida64.exe.

    Very easy installation of the program

    In the main program window, click Computer.

    Summary information.

    Everything that we have installed inside the system unit is very clearly presented:
    Motherboard model
    Asus P8Z77-V LX2 (2 PCI, 2 PCI-E x1, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Video, Gigabit LAN)

    and its chipset Intel Panther Point Z77, Intel Ivy Bridge

    QuadCore Intel Core i7-3770 processor, 3833 MHz (39 x 98) video adapter, sound card, RAM, monitor, hard drive, BIOS type, and so on and so forth.

    If you left-click on the name of the motherboard, a small menu will open, with which we can go to the official website of our motherboard, find out complete information about it and download drivers for it.

    To download drivers on the official Asus website, select "Support", then "Download"

    Read the next article “How to download and install drivers on the motherboard”

    - today we will look at how to find out the model of the motherboard on a computer. Updating drivers, checking hardware compatibility, and purely out of curiosity - ... using the methods given in this article to check the motherboard model is much easier than disassembling the computer and studying the stickers inside the system unit.

    You can simulate quite a lot of situations in which it is very important to know the model of the motherboard: a banal driver update, buying new hardware (find out what can be added to the system and whether there are the necessary slots for this, for example, to expand RAM)…

    If you still have the documents that were issued with the computer (or individual items for components, if you selected the components yourself), you can find out the answers to your question there. This is probably even the best way, because you can check the compliance of the real situation with what is indicated in your documents.

    In principle, I will not tell you how to find out the name of the motherboard by opening the system unit - in the modern situation this is absolutely not necessary, because software methods will provide information more than just a visual inspection of the motherboard.

    Of course, I don’t deny that you can recognize the model by looking at the board itself (I’m not so stubborn as to say that this should never be done), and an advanced user probably knows where and what to look... but for us, I recommend using the simplest and most correct methods

    Method 1. Find out the name of the motherboard through the command line

    If you enjoy using the Windows command line, then you can easily find out your motherboard model using Microsoft's powerful WMIC tool.

    With WMIC we can perform a baseboard query to check the motherboard and several additional parameters such as serial number, revision and other detailed information about your motherboard. Let's try, using an example, to find out the manufacturer of our motherboard, model and serial number using WMIC.

    The program is in English, but this will not be a problem for us; we are specifically interested in the line Motherboard - this is the name of our motherboard.

    Despite such a small size (less than 1 megabyte in archive) the program can tell you a lot about your computer, but I wouldn’t recommend using it... find out what kind of motherboard is on your computer - it’s great, for everything else there are more convenient analogues.

    Method 3. AIDA64 - find out the motherboard model

    There are several editions of AIDA64, the Extreme Edition is perfect for us (the application costs money, but the 30-day trial version, indicated on the download page as TRIAL)

    After installing AIDA64, launch the program and find the “Motherboard” icon on the left side. In the window that opens, the second line “Motherboard” will display the manufacturer and model of the motherboard. As you can see in my computer the name of the motherboard is Asus P8H67.

    If you scroll down to the bottom of the window, you can find a link to the page for downloading the latest BIOS (Line “Download BIOS updates”). This can be useful if the purpose of determining the motherboard's firmware is a new version of the BIOS firmware

    Method 4. Piriform Speccy - a good program from the developers of Ccleaner

    If you have ever used the Ccleaner program and it left you with only positive emotions with its results, then the small program Speccy from the developers of the same Ccleaner (Piriform) will answer the question of how to find out the motherboard model. As always, you can download it from the official website:

    Launch the application and on the left side go to the “Motherboard” tab. On the right side in the “Model” line there will be an answer to our question - in our case it is P8H67 (LGA1155)...

    Not only did the program correctly determine the name of the motherboard installed in the computer, but it also showed its socket (1155) and a lot of other useful information (such as voltage, BIOS version and system temperature)

    Method 5. CPU-Z - will tell you not only about the processor

    CPU-Z is a very popular utility for identifying a processor, but it is perfect for identifying the motherboard model on a computer. The program is absolutely free and does not require installation, just download the current version from the official website

    After launching the utility, go to the “Mainboard” tab and in the “Model” line there will be the name of the installed motherboard. I have a P8H67 motherboard on my computer (for now readings all applications are the same)

    For many, the BIOS block will be useful; the firmware version and manufacturer are displayed here...

    Method 6. HWiNFO32 - detailed information about the motherboard

    To download the program, go to the official website (there are several versions of the program - HWiNFO32 for 32-bit systems and HWiNFO for 64-bit). In my case I downloaded HWiNFO64.

    After installing the appropriate version of HWiNFO, launch it (the launch may take a long time while collecting information about the components of your computer). The program will automatically display the "System Summary" screen, where the motherboard model will be shown in the "Motherboard" section

    By the way, please note that HWiNFO correctly identified the video card... I should add it to the note about video cards

    Method 7. Sisoftware Sandra - an underrated program

    When I was looking for information on how to view the motherboard on a computer, I never came across such an application as Sandra Lite in the reviews (this is what we will use, since specifically Lite- distributed free of charge). As usual, you can download it on the official website, avoid left-wing sources...

    After installing Sisoftware Sandra Lite, launch the program and go to the “Devices” tab. In the window that appears, double-click on the “Motherboard” icon and wait until the utility collects all the necessary information. Detailed information about your motherboard will open in a new window, in the “Model” line and there will be an answer to the question: How to find out the model of the motherboard?

    This section displays not only the name of your motherboard, here you will find a lot of other useful information about your motherboard. For example, you can find out how much memory and how many slots there are for it... or the model of the chipset on which your system is built

    BONUS! Information about the motherboard in the HTML report

    This application is called LookInMyPC and you can download it from the developers’ website (in English, there is a portable version that does not require installation)

    http://www.lookinmypc.com/download.htm

    After launch, you can choose what exactly to generate a report about, but we leave everything as it is and click the “Generate Report” button... all you have to do is wait for the report to be generated - it’s quick.

    The report file will open in any browser, in the “BIOS Information” block in the “Board Product ID” line and there will be the name of our motherboard.

    In fact, the report contains a lot of interesting and useful information, and as for the English language, Google Chrome translates everything wonderfully.

    The report generates quite a lot of data about the software part, and you can view it at any time without the program itself - this is very convenient

    What have we learned about the motherboard? — Conclusions

    Friends, we have looked at several ways to find out the motherboard model. As you understand from the note, this is quite possible to do without disassembling the system unit - there are more civilized methods.

    What to do with this information? - even if you need to visually look at your motherboard, it is quite possible to find its image and specifications on the official website by the model name.

    Hello.

    Quite often, when working on a computer (or laptop), you need to find out the exact model and name of the motherboard. For example, this is required in cases of driver problems ( same problems with sound:).

    It’s good if you still have documents after the purchase (but most often you either don’t have them or they don’t indicate the model). In general, there are several ways to find out the model of your computer's motherboard:

    • using special programs and utilities;
    • visually look at the board by opening the system unit;
    • on the command line (Windows 7, 8);
    • in Windows 7, 8 using the system utility.

    Let's take a closer look at each of them.

    Special programs for viewing PC characteristics (including motherboard).

    In general, there are dozens (if not hundreds) of such utilities. It probably doesn’t make much sense to dwell on each of them. I will give here several programs (the best in my humble opinion).

    1) Speccy

    To find out the manufacturer and model of the motherboard, just go to the “Motherboard” tab (it’s in the left column, see the screenshot below).

    By the way, the program is also convenient in that you can immediately copy the board model to the clipboard, and then paste it into a search engine and look for drivers for it (for example).

    One of the best programs for finding out any characteristics of a computer or laptop: temperature, information on any components, programs, etc. The list of displayed characteristics is simply amazing!

    Of the minuses: the program is paid, but there is a demo version.

    AIDA64 Engineer: system manufacturer: Dell (Inspirion 3542 laptop model), laptop motherboard model: “OkHNVP”.

    Visual inspection of the motherboard

    You can find out the model and manufacturer of the motherboard simply by looking at it. Most boards are marked with the model and even the year of manufacture (an exception may be cheap Chinese options, on which, if anything is marked, it may not correspond to reality).

    For example, let's take the popular motherboard manufacturer ASUS. On the ASUS Z97-K model, there is a marking approximately in the center of the board (it is almost impossible to confuse and download other drivers or BIOS for such a board).

    Motherboard ASUS-Z97-K.

    As a second example, I took the manufacturer Gigabyte. On the relatively new board, there is also a marking approximately in the center: “GIGABYTE-G1.Sniper-Z97” (see screenshot below).

    GIGABYTE-G1.Sniper-Z97 motherboard.

    In principle, opening the system unit and looking at the markings takes a few minutes. Here problems can arise with laptops, where getting to the motherboard is sometimes not so easy and you will have to disassemble almost the entire device. But nevertheless, the method of determining the model is almost error-free.

    How to find out your motherboard model on the command line

    To find out the motherboard model without third-party programs at all, you can use the regular command line. This method works in modern Windows 7, 8 operating systems (I haven’t tested it in Windows XP, but I think it should work).

    How to open the command line?

    1. In Windows 7, you can use the “Start” menu, or enter the “CMD” command in the menu and press Enter.

    2. In Windows 8: the Win+R button combination opens the Run menu, enter “CMD” there and press Enter (screenshot below).

    Windows 8: Launch Command Prompt

    • first: wmic baseboard get manufacturer;
    • second: wmic baseboard get product.

    Desktop computer: “AsRock” motherboard, model “N68-VS3 UCC”.

    DELL laptop: model mat. boards: "OKHNVP".

    How to determine the model of a mat. boards in Windows 7, 8 without programs?

    This is quite easy to do. Open the “Run” window and enter the command: “msinfo32” (without quotes).

    To open the Run window in Windows 8, press WIN+R (in Windows 7 you can find it in the Start menu).

    That's all for today. If you have anything to add on the topic, I would be grateful. Good luck everyone...

    Read more: