• How to enter the BIOS on a lenovo b50 30 laptop. Entering the BIOS in Lenovo B50. Changing the laptop boot order

    BIOS is a system that, even at the initial stage, helps the operating system understand how to boot and what functions to activate. In order to enter BIOS SETUP on Lenovo laptops (IdeaPad, ThinkPad and IdeaCentre, ThinkCentre) there are several methods, let’s look at the main ones.

    Incorrect settings in the BIOS can disrupt the operation of your device, so you need to be careful and understand your actions when making any changes.

    Method 1

    To call the BIOS, for almost all models of Lenovo laptops, you need to hold down the key immediately after turning on the power F2(or Fn+F2).

    In rare cases, it is necessary to use other keys, such as: F1(or Fn+F1) or just a button DELETE.

    Method 2

    Most Lenovo laptops have a NOVO button - this is a small button or hole with a curved arrow icon next to it. Basically, this button is installed next to the power button or on the right/left side of the device.



    To enter the BIOS, you need to turn off the laptop and hold down the NOVO button for a few seconds. After which a menu will appear on the screen in which, using the up/down arrows on the keyboard, select the item BIOS SETUP and press the ENTER key.

    Method 3

    This method is suitable for versions of Windows 8/8.1/10.

    Before proceeding to the first step of this method, try holding down the key Shift, reboot your device through the menu Start. If this is how you get to the menu Selecting Actions, then go straight to step 4 of this method.

    1. Press the keyboard shortcut Windows+ i to go to system parameters;
    2. In this window, select the section Update and Security;

    3. Next, go to the tab System Restore and at point Special download options press the button Reboot now, after which you will be taken to the menu Selecting Actions;

    4. Select an item Troubleshooting.

    5. Next, select the item Additional options


    6. UEFI Firmware Settings;


    ATTENTION! If none of these methods work, then, after unplugging the laptop and disconnecting the battery, open its case (bottom cover) and remove the flat battery from the motherboard for 10-15 minutes. This will reset the BIOS settings. Next, return everything back and, when you turn it on, try the first 2 methods again.

    Manufacturers of modern laptops deliberately make it more difficult to protect the BIOS from unwary users and try to prevent harm to the system. Lenovo laptops are no exception in this matter. You can still somehow work with older models without problems, but with new laptops you have to strain. Therefore, many users are wondering: how to boot from a flash drive on a Lenovo laptop, and we know the desires of our readers and publish this article.

    The first thing you need to do is go into the BIOS. To do this, restart your laptop and press the desired key combination. The F2 or Delete buttons (sometimes a combination of Fn and the F2 key) may suit you.

    Now you will see the main BIOS menu, which you will have to control using the keyboard.

    First of all, go to the Security tab and go to the Secure Boot line. This is a special protocol designed for secure booting. It blocks all attempts to boot the laptop from any boot device other than the Windows 8 installation disk. It must be disabled, and therefore the Secure Boot line should be set to Disabled.

    Now you will have to worry about activating compatibility mode with other operating systems. Since we are talking about Lenovo, we need to enable Legacy Support. To do this, go to the Boot tab. If you look at the first line in this tab, you will see Boot Mode, as in the picture below.

    Now you need to change the UEFI value to Legacy Support. And Boot Priority is on Legacy First.

    Then exit to the Main Menu, saving all settings. Simply click on Exit in the title bar, select Exit Saving Changes and press Enter. Confirm your decision by selecting Yes in the prompt that appears.

    Now you need to wait a little while the laptop reboots. The next task concerns directly working on a bootable USB flash drive. If you doubt your skills in handling equipment, then simply entrust the work of setting up and repairing Lenovo laptops to the specialists of a specialized service center.

    Those who have older Lenovo models that do not have such a complex security system can breathe a sigh of relief and get to work, skipping the previous steps.

    Changing the laptop boot order

    You need to go into the BIOS again, remembering to first insert the USB flash drive into the laptop. Go to the Boot section. If you did everything correctly, you will see your flash drive in this window.

    Here you need to set the priority of the flash drive, raising it to the first place in the list. Just press the Fn and F6 keys at the same time. As you can see, the device name has changed its position.

    Now click on Exit again and save all changes. The laptop will reboot and start booting from the flash drive. Don't forget to return the protection and make the rest of the settings in reverse order after completing the work.

    Good day.

    Lenovo is one of the most popular laptop manufacturers. By the way, I must tell you (from personal experience), laptops are quite good and reliable. And there is one feature of some models of these laptops - an unusual entrance to the BIOS (and you very often need to enter it, for example, to reinstall Windows).

    In this relatively short article I would like to consider these features of the entrance...

    Entering BIOS on a Lenovo laptop (step-by-step instructions)

    1) Usually, to enter the BIOS on Lenovo laptops (on most models), just press the F2 button (or Fn+F2) when turning it on.

    However, some models may not respond to these clicks at all.(for example, Lenovo Z50, Lenovo G50, and the whole model range: g505, v580c, b50, b560, b590, g50, g500, g505s, g570, g570e, g580, g700, z500, z580 may not respond to these keys)…

    Keys to enter BIOS for different PC and laptop manufacturers:

    2) The above models have a special button on the side panel (usually next to the power cable) (for example, the Lenovo G50 model, see Fig. 2).

    To enter the BIOS you need: turn off the laptop, and then press this button (usually there is an arrow on it, although I admit that on some models there may not be an arrow...).

    By the way, an important point. Not all Lenovo laptop models have this service button on the side. For example, on a Lenovo G480 laptop, this button is next to the laptop power button (see Fig. 2.1).

    3) If everything was done correctly, the laptop should turn on and a service menu with four items should appear on the screen (see Fig. 3):

    Bios Setup (BIOS settings);

    Boot Menu (boot menu);

    System Recovery (emergency system recovery).

    To enter the BIOS, select Bios Setup (BIOS settings and settings).

    By the way, maybe someone will need it: in Fig. 4 shows the settings of the BOOT partition of a Lenovo G480 laptop for installing Windows 7 on it:

    • Boot Mode:
    • Boot Priority:
    • USB Boot:
    • Boot Device Priority: PLDS DVD RW (this is a drive with a Windows 7 boot disk installed in it, note that it is first on this list), Internal HDD…

    Rice. 4. Before installing Windws 7 - setting up BIOS on Lenovo G480

    After changing all the settings, do not forget to save them. To do this, in the EXIT section, select “Save and exit”. After rebooting the laptop, Windows 7 installation should begin...

    5) There are certain laptop models, such as Lenovo b590 and v580c, where you may need the F12 button to enter the BIOS. By holding down this key immediately after turning on the laptop, you can get to Quick Boot (quick menu) - where you can easily change the boot order of various devices (HDD, CD-Rom, USB).

    6) And the F1 key is used relatively rarely. You may need it if you are using a Lenovo b590 laptop. The key must be pressed and held after turning on the device. The BIOS menu itself differs little from the standard one.

    And the last thing...

    The manufacturer recommends that you sufficiently charge the laptop battery before entering the BIOS. If during the process of setting up and setting parameters in the BIOS, the device turns off abnormally (due to lack of power), there may be problems in the further operation of the laptop.

    To be honest, I’m not ready to comment on the last recommendation: I’ve never experienced problems turning off my PC when I was in the BIOS settings...

    Good job 🙂

    Many people are happy owners of a Lenovo laptop. And let's face it - this laptop is quite reliable and of high quality. But the products from this manufacturer differ in one characteristic feature. Namely, an unconventional entry into the BIOS. And sometimes it’s simply necessary to go there, for example, to reinstall the operating system.

    In this small but informative article you can find out how to quickly and easily enter the BIOS (there are three reliable “reinforced concrete” methods for this). The online article will tell you two little secrets with which you are guaranteed to get into the bios from any laptop (regardless of the brand and manufacturer), if you were unable to do this the traditional way. And finally, a small bonus - how to get to the Lenovo boot menu in a few clicks. But this is just in case.

    A simple algorithm for logging into bios on a Lenovo laptop or the NOVO BUTTON button will help you!

    Almost every Lenovo laptop is equipped with a special-purpose button called “Novo Button”. You may be familiar with its second name " OneKey Recovery"or "OneKey Rescue System". It is easy to find by the drawn small bent arrow. It is located on the front of the keyboard.

    So, we proceed according to the scheme:

    How to enter BIOS with Lenovo B50 10 using Fn+F2

    The second one is the same simple solution Problems logging into the BIOS from a Lenovo laptop. We are working according to plan:

    1. First, reboot the laptop;
    2. In the very initial boot phase, press and hold the Fn key. And, continuing to press Fn, very quickly click on the key called F2.

    Logging into bios from a Lenovo b590 laptop (or from a Lenovo b50 10 laptop) using Fn and F2 buttons is not always effective. Be prepared for the fact that this method may not work.

    And now the two secrets promised earlier

    Few people know that there are two more little-known options for how to enter the BIOS from a Lenovo b50 10 laptop. So let's get started.

    Secret No. 1

    Entering the BIOS from a Lenovo laptop using a computer mouse. Yes, you got it right. You will need This is a small computer device - a computer mouse. You may even have two of them:

    • Built into your Lenovo;
    • Separately purchased and connected to it.

    Now attention! Algorithm for the first secret of how to enter the BIOS on Lenovo b590:

    Secret number 2: how to enter BIOS on a Lenovo laptop

    Newcomers sometimes hear “Reboot... enter lenovo b50 BIOS... press... setup/ key. . . launch” and act strictly in accordance with what is written or heard. They simply turn off the Lenovo laptop and, logging into the operating system, press the BIOS entry key. But in this case, the BIOS will not open, but the OS will start loading. The problem is that the Windous 8.1 operating system is programmed for fast entry, which is tied to hibernation. And therefore, you can only enter Bios through the Reboot menu on your favorite laptop. Remember, don't run "shutdown and on" on your ideapad.

    As you can see, nothing complicated. You just need to get used to it and consider that your laptop is a little special compared to many others.

    Read more: