How to strengthen the signal of a 3g modem with your own hands - effective amplification of 3G mobile Internet.

Today, all mobile communication providers offer to use their Internet traffic within the 3G network. Each mobile operator has its own specific coverage area. It provides a good Internet connection, however, going beyond it, the signal strength decreases, which affects the speed of the mobile Internet. To avoid such unpleasant moments, it becomes necessary to amplify the 3G modem signal. In this article, we will tell you how to amplify the signal of a 3G modem with your own hands effectively and inexpensively.

There are several options for strengthening the modem at home for different situations.

How to strengthen the 3G signal with your own hands using a VEGAtel repeater

A 3G repeater is by far the most effective tool in terms of strengthening the mobile Internet. It is believed that the best manufacturer is VEGATEL (domestic).

Using a repeater is possible only if there is at least some signal. The phone must catch at least a small 3G signal so that it is advisable to use an active cellular signal amplifier and the Internet for summer cottages. This is the most efficient way to amplify the signal. It gives maximum results. The user will receive the maximum speed provided by the provider. The repeater combines the properties of a mobile network signal strength amplifier for communication and the Internet. It is used in country houses, cottages, apartments.

The repeater does not work by itself, but as part of a kit. It is complemented by an internal and external antenna connected by a cable. You can purchase a complete system that includes all components. For effective amplification, we recommend a ready-made kit VEGATEL VT-3G-kit. The manufacturer has established itself in the market with the best side on the principle of price / quality. This is certified Russian equipment.

How to amplify the signal of a 3g modem using speakers

Everyone has speakers at home, so the cost of this method is zero. Subscribers who use the Internet via a modem noted an improvement in the quality of the connection by 10-20% when approaching the speakers. It seems a little, but with a low level of Internet connection it is noticeable. This will slightly boost the signal of the 3G modem.

When using this method, the reaction of the speakers in the form of clicks and crackles is observed.

He can get rid of these annoying sounds if you reset the volume to zero.

Signal booster for 3g copper wire modem

Another option is to make a do-it-yourself 3G signal amplifier from copper wire. It takes a little effort. The amplifier can be crafted by constructing a structure from copper wire and a tin can. The copper wire must be connected on one side to the SIM card by making several turns around the open modem. Lead the other end into the window. The second end must be connected to a tin acting as an amplifier. Bank is directed towards the nearest station of the cellular network. The quality of the Internet connection will increase to 90%.

Before you start making a cellular amplifier, you can try to solve the issue in another way. You can enhance the reception of the 3g modem signal. The device of a mobile phone provides for the transition from 3g mode to 2g mode with a sufficiently low Internet connection power. To prevent this from happening, you need to turn to the phone settings and select the correct mode of operation of the Internet connection. It is important that the connection is not selected “automatically” in the field, otherwise, at the slightest weakening of the signal, the connection will change the mode and it will become impossible to use the network.

By default, the mode is selected in the manner described above, but you need to remember that each phone model has its own characteristics and may have its own network connection program.

Below is a simple and effective method to improve the signal strength of your modem on your own. The method is based on the principle of operation of a satellite dish. At the same time, there is no need to solve tasks beyond the power of a non-professional and remake the device.
To make this not a tricky device, you will need an object capable of performing the functions of a reflector. This property is inherent in bowls, basins, discs and cans.

Plus, you need to purchase a three-meter long cable with USB connectors of the “mother-dad” type. It is necessary to connect the reflector and the computer. The sequence of work is as follows. A flash drive is attached to the core of the disk. The easiest way is to tie it with tape. One end of the cord will connect to the flash drive, and the other to the cable, for which USB connectors are provided. The disc is mounted on the facade of the house, on the outside of the wall or on a pole. It is important to point the flash drive in the direction of the most powerful reception of the base station signal. This method improves the quality of the 3G connection, but not much due to the length of the cable.

The reflective surface acts as an amplifier. The larger the reflective surface, the better 3G signal you can expect. You can use any flat dishes made of stainless material except enameled.

Special external signal amplifier 3g modem

Mobile operators strive to expand coverage and improve the quality of communication so as not to lose customers. But until the coverage is expanded to the required area, temporary solutions to the issue of Internet connection have been invented. For this, a 3g signal amplifier is produced for the Megafon, Beeline, MTS, Tele2 modem. The acquisition of such a device solves the issue of amplifying signal power and finding a solution on your own.

The device is an antenna connected to a 3G modem.

The model must be selected individually based on the indicators of the radiation pattern and gain. An industrial amplifier antenna is also installed in the direction of the base of the mobile operator, which is located nearby. The amplifier cord is short so as not to damage the signal quality.

How to improve the signal quality of a 3g modem using an internal antenna

Another option for an independent way out of the situation is to use additional devices to connect to the internal antenna. The stumbling block may be the ability to access the connector on the internal antenna. If it is hidden, then not everyone will decide to solder the device on their own. If the connector is open, then you can purchase an amplifier or use a television antenna as an amplifier. If the connector is hidden or not provided, then you can use the services of a wizard to resolve this issue. When remodeling the body of the internal antenna, it is important to understand that it will not be possible to remake it back, just as it will not be possible to operate the modem only with an internal antenna.

Many people decide on an independent solution to the issue of improving the quality of the Internet connection using improvised means. As a rule, the quality of the coating increases by 30-40%, depending on the length of the cable.

It is important to look into the settings to make sure that the phone picks up a signal in 3g mode. You can independently solve the issue of signal strength, the main thing is to make every effort and use all the proposed methods. Then the result will not keep you waiting. Each method of amplification has found its supporters and has a positive result.