Motorola Moto X Force Secret codes. Motorola Moto X Force - detailed overview of the characteristics of Moto x force firmware

At the end of 2015, the American market was replenished with the flagship model Droid Turbo 2. It was designed to reincarnate the once top Motorola brand. Traditionally for the States, the device was tied to the Verizon operator. However, the new boss in the person of Lenovo went further and introduced Moto X Force - a smartphone for all markets. What is the highlight of this decision, we will now figure it out.

Appearance and equipment of Motorola Moto X Force

The manufacturer, contrary to popular belief, does not position its brainchild as a secure device. The only thing is that at the factory the smartphone is treated with a special liquid that makes the case waterproof. Thus, compliance with the IP52 standard is declared, which allows it to be wetted, but not immersed in water. At the same time, Moto X Force is equipped with a Moto ShatterShield display, which theoretically does not break under any conditions. Lenovo gives it a 4-year warranty. As crash tests have shown, the screen can actually withstand several drops on a concrete surface; however, the body bends, but the smartphone itself continues to work.

The latter here has a metal frame and is made of aluminum. That is why the weight of the device does not exceed 169 g, with dimensions:

Width - 78 mm;
Height - 149.8 mm;
Thickness - 9.20 mm.

These are quite normal indicators for this type of device. If we talk about the form factor, then we have a 5.4-inch candy bar with rounded edges and fairly thick frames around the screen. The main camera is recessed into the body, which means there is no need to fuss with a case or additional protective glass for the lens. The function keys on the right side are small in size, but they work clearly and do not rattle. In general, the build quality is at a high level, although for this price tag it would be difficult to expect anything else.

The SIM card tray is located unusually - next to the 3.5 mm jack on the bottom edge of the case. Moreover, there is only one SIM card, but it is adjacent to a slot for a memory card. The back cover is non-removable and is integral with the battery. By the way, it is made of “ballistic nylon”, which a priori cannot be shuffled. But there are problems with the front panel. The fact is that she likes to accumulate dust on the top and bottom of the decorative insert of the speaker. The speakerphone and microphone were also included. Waterproof you say? Well, well. As for the “war color”, here you can choose one single color - black. However, this is a male device with all that it implies.

The device is supplied with:

Smartphone.
TurboPower charger.
USB cable.
A paperclip for removing the SIM card tray.
Headset (wired).
Manual.

Motorola Moto X Force screen

Let's start with the performance characteristics:

Maximum rage level at 330 cd/m2;
Color gamut (sRGB) more than one hundred percent;
Delta E - 1.6;
Gamma is 2.3;
Color temperature - 6800K.

Not to say that these are outstanding characteristics for a capacitive AMOLED screen. Moreover, it is produced by Samsung, which produces higher quality displays for themselves, but here they clearly cheated. However, QHD resolution is present, but the manufacturing technology deserves special attention. Multilayer protection is implemented here, where the first layer is two durable plastic panels, then there are two touch substrates, then a touch “soft” OLED matrix that is indifferent to shocks. The picture is completed by an aluminum substrate that covers the iron. Yes, it’s difficult to break this “Big Mac”, but it’s easy to scratch, since the manufacturer did not provide tempered glass, so you’ll have to glue a protective film or a Chinese equivalent of a “gorilla” to the heap. Needless to say, such a “pie” does not have the best effect on color rendition. In addition, the multilayer display increases the thickness of the case by at least a millimeter.

Viewing angles are good, but the screen is hopeless in the sun and glares mercilessly. It feels like you are looking deep into the system and somewhere at the bottom is the system interface. To be fair, it is worth noting that the effect is not noticeable indoors, but over time you begin to take a closer look.

Motorola Moto X Force - firmware review

Initially, the smartphone was delivered out of the box with pre-installed Android 5.1, but migrated to Russia with the sixth edition of the OS. Moreover, this is not bare firmware, not pathetic attempts to create something of your own and then forget to update, but a balanced operating system, slightly modified by the developers, but not without its own features. Thus, a proprietary option has been implemented that displays all the necessary information on the locked screen. The device reacts sensitively to movements and changes in lighting in order to show the current time or notification of arrival at the destination at the right time. Interestingly, this has little effect on autonomy.

the reboot button, desired by owners of “pure” Android 6.0;
contextual computing;
additional processors that control sensors and cameras while the smartphone is sleeping;
proprietary Active Display option.

Filling Motorola Moto X Force

The device runs under the controls of the same “brazier” represented by the Snapdragon 810, which received four ARM Cortex-A57 cores with a clock frequency of 2.0 GHz and four ARM Cortex-A53 cores, 1.5 GHz. On paper, everything is fine, but in practice, in multitasking mode, the device begins to overheat and frequencies sag. To be fair, we note that the body of the Moto X Force cannot be called hot even under overload, which is helped to a certain extent by aluminum and the thickness of the case. However, in fact, we get a Snapdragon 652 with good optimization for games; fortunately, the Adreno 430 GPU and 3 GB of LPDDR4 RAM are also present.

The Motorola Moto X Force 64gb version may be enough for the average user if you do not need to store a lot of files. At the same time, the internal memory can be expanded up to 2 TB using microSD cards for the price of an airplane. True, this is difficult to believe. In any case, the card will take a long time to think about, but the same 256 GB are swallowed by the gadget without difficulty. If you neglect memory expansion, then in the case of, for example, Motorola Moto X Force 32gb, you will get 21 gigabytes of usable space. The rest will be taken up by the operating system and software. However, no one has canceled root rights. By the way, the device supports OTS connection, even the mouse works, which was a little surprising.

Motorola Moto X Force test

The model cannot be called weak, even though it does not take first place in synthetic tests, after all, it is 2017. But it can fully compete with HiSilicon Kirin 935, MediaTek MT6795 and Exynos 7420. Thus, in AnTuTu the device scores 85,652 “parrots”. Browser and graphics tests also produced average results. There were no problems with Full-HD video playback. At the same time, the smartphone heated up slightly above and to the left of the center of the body, that is, where the processor is located. The maximum temperature was 48 degrees, the minimum - 24 degrees. This is tolerable, considering the fact that under load the average gadget heats up to 35 degrees.

In any case, you have to come to terms with the idea that you are buying a device for the “here and now,” as new SoCs enter the arena, and games are slowly but surely approaching their desktop counterparts. 2017 will pass without losses for Moto X Force, but the next one is still in doubt. Thus, there is no reserve for the future.

Communications Motorola Moto X Force

The smartphone is optimized for Russian networks, can operate in 2G GSM and 3G WCDMA, as well as LTE Cat6 FDD and TDD, that is, theoretically accelerates to 300 Mbit/s. There are no questions about the quality of signal reception. The device feels confident both indoors and with a weak signal somewhere in the backyard. Thus, the following frequencies are supported:

LTE FDD: Band 1–5–28; TDD Band 40;
WCDMA: 850–2100 MHz;
GSM: 850–1900 MHz.

Also provided:

Bluetooth 4.1 with feedback;
NFC module;
two Wi-Fi bands;
similar number of MIMO antennas.

In addition, there is Wi-Fi Direct, and therefore the device can act as an access point. Connectors include microUSB second generation. Not the right age for the third generation. The geotag is generated by GPS with mobile correction A-GPS; GLONASS is provided for masochists. Be that as it may, with a cold start, satellites are detected quickly. In addition, there is a magnetic sensor that can be used as a compass.

The standard dialer is different from the system one and supports quick Smart Dial search. The keyboard is also non-standard, but comfortable, there is continuous input. It’s a pity that the developer did not provide for scaling the interface.

Cameras Motorola Moto X Force

The smartphone is equipped with:

21-megapixel main camera Sony IMX230 with f/2.0 aperture and LED flash.
5-megapixel front camera with f/2.0 aperture and LED flash.

As practice has shown, the software part of the cameras is poorly implemented. Even switching to the front sensor by moving your hand does not help the situation. The controls respond poorly to taps, and the interface itself is poorly designed, which is unforgivable for a flagship. In this case, it is better to focus manually, since the automatic mode is obviously lazy. In addition, exposure is combined with autofocus, which imposes considerable inconvenience.

Photography is at the proper level, but for obvious reasons its quality does not reach modern top-end smartphones. The video camera supports 4K, there is slow mode, that is, slow motion. There is no optical stabilization as such, but when moving, the video is recorded smoothly. I'm especially pleased with the sharpness. There are those who criticize the camera, but here, as they say, it comes down to taste and color. If you tried the iPhone 7 optics, then, of course, the Moto X Force is not the best option. Be that as it may, the detail is good.

The front camera for selfies is not the best option, except that Skype will love it and it will save traffic, but it has a flash, which is a great help in certain situations.

Motorola Moto X Force sound

Before the device's release, there were rumors about five speakers. Expectations were not met. The device received one music speaker and two microphones, including noise reduction. The sound is loud and clear, with a small amount of mid and low frequencies. At maximum, the sound begins to choke and the speaker wheezes. Although the manufacturer does not position its brainchild as an external audio speaker. It's enough for a ringtone, and the voice recorder picks up even distant conversations and records clearly.

But in headphones, the picture changes radically with the help of the high-quality audio path of the Snapdragon 810 and a 10-band equalizer with presets. Thus, the solution is inferior only to devices with a separate DAC; it is enough for a music lover, but not enough for an audiophile.

Motorola Moto X Force: battery characteristics

The autonomy of the device is pleasing, despite the fact that it has a powerful processor and a large AMOLED screen, which are provided by a battery with a capacity of 3760 mAh. The charge easily lasts for a couple of days of work in mixed mode.

Video from memory card for 13 hours;
Games up to five hours;
Reading - 7 hours.

The device supports fast charging and comes with a compact TurboPower charger, which can actually charge up to a hundred in an hour and 15 minutes. True, the charger heats up quite a bit. Nobody said it would be easy, fortunately this does not affect the performance of the adapter in any way. That is why the manufacturer did not provide a removable USB cable, so that a third-party one would not simply melt. If you manage to lose your charger, it will be difficult to find it in retail, and it costs a lot. It is recommended to use a standard charger too, so as not to destroy the battery, but the speed of replenishing the capacity will be appropriate.

Advantages and disadvantages of Motorola Moto X Force

Motorola fans expected the Moto X Force to become cheaper, but a miracle did not happen, but it should have happened, because interesting analogues have long been on the market that can do more and cost less. Be that as it may, the device still remains a device for fans of the brand, designed to surprise others, they say, Motorola is still great and what if the Chinese bought it. At the same time, it’s not only the price that saddens us, but also the camera, the shortcoming of which could be corrected in software, which for some reason the developers did not do.

Pros of the device:

Indestructible screen.
Balanced iron.
Large memory support.
Thoughtful firmware.
Capacious battery.
Really fast charging.
21 megapixel camera.

Among the disadvantages we note:

No tempered glass.
Terrible Camera app.
Large frames around the screen.
Hot Snapdragon 810.
Price.

Motorola Moto X Force: price and video review

The model can really surprise you; one multilayer screen is worth it. And the device looks brutal and memorable. The place for it is on the dashboard of a jeep or next to a vertical gun, although no special protective qualities other than the screen are regulated. In other words, we have before us an unusual smartphone for those who want to stand out and least of all think about the filling, although calling it budget is hard to come by.

The price of Motorola Moto X Force in Russia is 40,000–50,000 rubles, depending on the storage capacity. Check out the video review and crash test of the device below:

standard codes - 1234 or 0000 unlocking Motors 19x: up to version 1.71 - code 19980722, for versions higher and for C200, C205 - code 20010903
Removing the C350 code
1. *#06#
2.Press the Menu button then 048263* (press the buttons quickly for 2 seconds)
3. An input field will appear
4.Enter 18*0 (Master Reset)
5.Enter 18*1 (Master Clear)

codes for unlocking cell phones.

master code for Motorola T205/T190/T191
master code - 19980722 ok

(T190, T191, T205) master code

P2K test menu:
*#06#, menu, menu, 048263*

Test commands:
32*116*1*0*0 - read phone code
32*118*1*0*0 - read security code
18*0 - factory reset, phone code off
18*1 - master reset
54*18*1 - full phone reset
10*0*6 - select 900/1800
32*279*1*0*8 - model
32*383*1*0*0 - flex version

Hard reset MPx200 - blue button + power on

Codes for Motorola:
View IMEI *#06# >
Activation of 100 numbers in the phone ppp087p1p > OK
Activation of ppp123p1p clock >
Activating the engineering menu ppp000p1p > ppp113p1p > OK (reboot)
Set alarm for incoming messages ppp276p1p >
It is possible to send an SMS from your address book, to do this you need to press ppp272p1p >
To be able to manually switch frequency ranges 900, 1800, 900/1800 you need: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p >
To activate the music editing menu you need: ppp278p1p >

TEST MODE - new To enter Test Mode, you need to hold the "#" key in the main menu for 3-4 seconds
In order to use some functions in the test mode menu, you need to enter a cell and "#"
01# - exit Test Mode
19# - shows software version
57# - resets all phone settings to factory defaults
MOTOROLLA T2288
View IMEI *#06# >
Activation of 100 numbers in the phone ppp087p1p > OK
Activating the clock ppp123p1p > OK does not work in all phones, it all depends on the firmware.
Activating the engineering menu ppp000p1p > ppp113p1p > OK (reboot)
Set alarm for incoming messages ppp276p1p >
It is possible to send an SMS from your address book, to do this you need to press ppp272p1p >
To be able to manually switch frequency ranges 900, 1800, 900/1800 you need: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p >
To activate the music editing menu you need: ppp278p1p >
new To activate the alarm you need to dial it works only with new firmware
new To enable the "Games" item in the menu, you need to type works only with new firmware
new To turn on the game Bricks you need to type works only with new firmware
new To turn on the game Tower of Hanoi you need to dial works only with new firmware
new To enable the Baccarat game you need to dial it works only with new firmware
new To turn on the Calculator you need to type, it works only with new firmware

Service menu in Motorola C350 (suitable for many other “C versions”)

Teams:
0*0*0 Select tone 0
0*0*1 Select tone 1
0*0*2 Select tone 2
0*0*3 Select tone 3
0*0*4 Select tone 4
0*0*5 Select tone 5
0*0*6 Select tone 6
0*0*7 Select tone 7
0*0*8 Select tone 8
0*0*9 Select tone 9
0*0*124 Select tone 1 KHz
0*0*125 Select tone 2 KHz
0*0*126 Select tone 3 KHz
0*0*127 Select tone 4 KHz
0*1*X Disable tone X
3*0*1 Enable vibrator
3*0*0 Disable vibrator
4*3*1 Enable speech coder full rate Audio loopback
4*3*0 Disable speech coder full rate
4*4*1 Enable speech coder enhanced full rate
36 January 23, 2003 6809456A82
Troubleshooting C350 Series
4*4*0 Disable speech coder enhanced full rate
4*5*1 Enable speech coder half rate
4*5*0 Disable speech coder half rate
5*0*0 Set audio level 0 Audio level
5*0*1 Set audio level 1
5*0*2 Set audio level 2
5*0*3 Set audio level 3
5*0*4 Set audio level 4
5*0*5 Set audio level 5
5*0*6 Set audio level 6
5*0*7 Set audio level 7
5*0*8 Set audio level 8
5*0*9 Set audio level 9
5*0*10 Set audio level 10
5*0*11 Set audio level 11
5*0*12 Set audio level 12
5*0*13 Set audio level 13
5*0*14 Set audio level 14
5*0*15 Set audio level 15
6*2*2*0*0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute
6*4*6*0*0 Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute
10*0*3 Set band GSM 900
10*0*4 Set band DCS 1800
10*0*5 Set band PCS 1900
10*0*6 Set dual band GSM 900 / 1800
10*1*0 Read band 3= GSM 4= DCS 5= PCS 6 =GSM/DCS
18*0 Initialize non-volatile memory (Master Reset)
18*1 Initialize Non-volatile memory (Master Clear)
20*X*0 Load Channel number X Select Channel (Used for debugging Rx mode)
20*1*0 Load channel number 1 GSM Low channel
20*62*0 Load channel number 62 GSM Mid channel
20*124*0 Load channel number 124 GSM High channel
20*512*0 Load channel number 512 DCS Low channel
20*700*0 Load channel number 700 DCS Mid channel
20*885*0 Load channel number 885 CDS High channel
20*512*0 Load channel number 512 PCS Low channel
20*661*0 Load channel number 661 PCS Mid channel
20*810*0 Load channel number 810 PCS High channel
55*2*001 Test Display. All pixels ON
55*2*000 Test Display. All pixels OFF
55*2*002 Test Display. Checkerboard pattern A

55*2*003 Test Display. Checkerboard pattern B
55*2*004 Test Display. Border pixels ON
*#06# IMEI Check No Test Mode Required

For dessert:
NETMONITOR turns on: Menu 00**83786633*
turns off: MENU 00**8378633*
you have to press very quickly. turn off the handset, and it appears every time you turn it on. Exit to menu/back: menu-left soft button

Photo of the caller instead of standard pictures
Published: WR, Enabled: Feb-01-2004

Caller's photo
For a long time I was racking my brain on how to put his photo on the caller. My core fan kept bothering me, saying that on his Siemens M55 this can be easily done without much effort (what a bastard). And then the thought came to my mind: “What if I uploaded a picture to my phone with the same name, which is in the icons that can be assigned to the caller?” I immediately went to the telephone directory menu to see what these standard icons were called, because I thought that the name of the icon should not differ from the name of the file in which it is stored. Seeing all the names in Russian, I was disappointed and thought that I would have to sit with a translator for a long time, choosing the right name for each. First of all, I tried to upload a picture called boss.gif to my phone. And oh yes!!! It worked!!! Instead of some suit and tie, my picture was proudly displayed on the screen. I started to think about choosing English file names, but it dawned on me. What am I doing? Everything is already on your phone! You just need to switch to English. Everything worked out, instead of standard icons, I uploaded photos of my friends and my girlfriend. The size of standard icons is 32*32, the maximum size of the photo that I uploaded to the phone is 65*65. I haven’t tried it again and I don’t recommend it, even less is better, since the large picture obscures the caller’s name.
A list of files that can be replaced with friends' photos.
Robot - robot.gif
UFO - ufo.gif
Abomination - stinky.gif
Family - family.gif
Star - superstar.gif
Brainy - brainy.gif
Skin - baldy.gif
Fan - fan.gif
Buddy - buddy.gif
Charm - delicius.gif
Little thing - cute.gif
Baby - kid.gif
Terrible - yucky.gif
Cutie - sweetie.gif
Boss - boss.gif
Charm - delicious.gif

Own melody when you turn the phone on and off.

In order for your own melody to play when you turn your phone on and off, you need to upload your own melodies into the phone with the name ~*****File034.mid ~*****File029.mid, respectively. I do not recommend uploading a melody longer than 10 seconds.

The picture when you turn on the phone instead of the inscription “Searching for network”.

Upload any picture or animation called “custwakeup” to your phone. Then we launch the MSS 3.2.3 program. Select the Other functions tab, check the box next to “Activate Wakeup graphics” and click “Activate selected features”. Then we restart the phone by clicking on “Restart the phone”.

Tested on TeleTac250, Profile300e
So: how to break a password (for example, you turn on someone else’s phone, and it displays Loc"d and the standard password “123” does not work):

Turn on the phone
-We see Loc"d
-press (FNC)-00**83786633-(STO)-# (entering service mode) - in the end you should see US" -press 55# - these are user parameters settings -press several times * until you see 7 blinking in turn and 000000, zeros are the system code that must be entered when changing the password “legally”
-press * again and see 8 flashing in turn (we don’t need it) and a three-digit number - the password that we need - now you can turn off the phone, and when you turn it on, dial the same three-digit code!!!

A general phone reset may be necessary, for example, when selling a phone:

Turn on the phone
- press (FNC)-00**83786633-(STO)-# (enter service mode) - in the end you should see US"
-press 32# (you need to wait until it beeps or reboots),
-all timers are reset, all phone books are reset, all settings are returned to their default state;
Your operator's settings will remain unchanged (the phone resets for about a minute)...

codes for Motorola (I don’t remember whose article... thanks to the author

To enter the service menu, quickly press the combination of the following buttons: Menu048263*
A command prompt should appear on the screen: Opcode:___________
Then you can enter commands, for example 54*18*1 - complete reset of the phone.

Rollback (return to the previous state) is simple - let's say you want to return the operator's logo, type Opcode and field 1,2,3,4 are the same as there, and field 5 (d) as in the Rollback line. All.

Teams:

Microphone/speaker check (loopback):
4*5*1

Reading phone code:
32*116*1*0*0

Reading the security code:
32*118*1*0*0

(the code appears in the format 0030003000300030...
every 4th digit is required, so in this case it is four 0)

Transmitter check:
10*0*6 - range selection 900/1800
20*N*0 - N-channel selection
45*M - selection of M power level
7*0*1 - enable the transmission line, transmit zeros
7*1*1 - switching on the transmitter, transferring units.

Master Reset 18*0
Master Clear 18*1

Remove operator

Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "116" "OK"
Field 4 "1" "OK"
Field 5 (D) "016" "OK"
Rollback: Field 5 (D) “000” “OK”
Results
F1:0

And also this:

Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "75" "OK"
Field 4 "1" "OK"
Field 5 (D) "255" "OK"
Rollback: Field 5 (D) “191” “OK”
Results
F1:0

Remove date

Condition:
Availability of connected GPRS service

Opcode "47" "OK"
Field 1 "424" "OK"
Field 2 "1" "OK"
Field 3 "1" "OK"
Field 4 "1" "OK"
Field 5 (D) "032" "OK"
Results
F1:0

As soon as the GPRS sign appears on the screen, the date will disappear.

Remove line icon

Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "31" "OK"
Field 4 "1" "OK"
Field 5 (D) "231" "OK"
Rollback: Field 5 (D) “247” “OK”
Results
F1:0

Engineering menu:
Go to the “Opcode” menu
048263*
Enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "68" "OK"
Field 4 "1" "OK"
Field 5 (D) "183" "OK"
-›Rollback: Field 5 (D) “007” “OK”
Results
F1:0
Appeared: Menu - › Office tools - › Technology

Kypcop in the main menu in the middle:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "107" "OK"
Field 4 "1" "OK"
Field 5 (D) "176" "OK"
-›Rollback: Field 5 (D) “160” “OK”
Results
F1:0

Activation of the “Brightness” menu:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "116" "OK"
Field 4 "1" "OK"
Field 5 (D) "064" "OK"
-›Rollback: Field 5 (D) “000” “OK”
Results
F1:0
Appears: Menu-›Parameters-›Initial setting

Tones and vibration
0*0*0 Select tone 0
0*0*1 Select tone 1
0*0*2 Select tone 2
0*0*3 Select tone 3
0*0*4 Select tone 4
0*0*5 Select tone 5
0*0*6 Select tone 6
0*0*7 Select tone 7
0*0*8 Select tone 8
0*0*9 Select tone 9
0*0*124 Select tone 1 KHz
0*0*125 Select tone 2 KHz
0*0*126 Select tone 3 KHz
0*0*127 Select 4 KHz tone
0*1*X Disable tone X
3*0*1 Enable vibration
3*0*0 Disable vibration

Setting the quality of speech transmission and reception decoding
4*3*1 Enable full quality speech encoder (fr)
4*3*0 Disable full quality speech encoder (fr)
4*4*1 Enable fullest quality speech encoder (efr)
4*4*0 Disable fullest quality speech encoder (efr)
4*5*1 Enable half quality speech encoder (hr)
4*5*0 Disable half quality speech encoder (hr)

Setting ringer and sound volume
5*0*0 Volume level 0
5*0*1 Volume level 1
5*0*2 Volume level 2
5*0*3 Volume level 3
5*0*4 Volume level 4
5*0*5 Volume level 5
5*0*6 Volume level 6
5*0*7 Volume level 7
5*0*8 Volume level 8
5*0*9 Volume level 9
5*0*10 Volume level 10
5*0*11 Volume level 11
5*0*12 Volume level 12
5*0*13 Volume level 13
5*0*14 Volume level 14
5*0*15 Volume level 15. It seems that this value is higher than you can set on your phone yourself
6*2*2*0*0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute (I don’t know what it is)
6*4*6*0*0 Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute (I don’t know either)

Transmission settings - GSM, etc.
10*0*3 Set GSM 900 frequency
10*0*4 Set DCS frequency 1800
10*0*5 Set PCS frequency 1900
10*0*6 Set dual frequency GSM 900 / 1800
10*1*0 Read frequency 3= GSM 4= DCS 5= PCS 6 =GSM/DCS
18*0 Initialize non-reflashable memory (Master Reset - complete reboot)
18*1 Initialize non-flashing memory (Master Clear - complete cleaning)
20*X*0 Load channel number X Select channel (Used for Rx debug mode)
20*1*0 Load channel number 1 GSM Lower channel
20*62*0 Load channel number 62 GSM Middle channel
20*124*0 Load channel number 124 GSM Higher channel
20*512*0 Load channel number 512 DCS Lower channel
20*700*0 Load channel number 700 DCS Middle channel
20*885*0 Load channel number 885 CDS Highest channel
20*512*0 Load channel number 512 PCS Lower channel
20*661*0 Load channel number 661 PCS Middle channel
20*810*0 Load channel number 810 PCS Highest channel

Testing the display (for example, for dead pixels)
55*2*001 Enable all pixels
55*2*000 Turn off all pixels
55*2*002 Checking the display. Test sample A
55*2*003 Display check. Test sample B
55*2*004 Display check. Border pixels enabled
55*2*0xx (xx=05 to 14 or to 13). Tests the monitor in color modes

To launch the menu you need to quickly press the following buttons: Menu, 0, 4, 8, 2, 6, 3, *. The following message should appear on the screen: “Opcode:”. This is the service menu. We will use two commands: 32 - read, 47 - write!

BE CAREFUL WHEN USING COMMAND 47. IF YOU ARE WRONG, YOU CAN CHANGE AN UNKNOWN PHONE SETTING, WHICH CAN LEAD TO ANY CONSEQUENCES!!!

AND MORE! In the phone service menu, all numbers must be entered in the decimal system. And the phone shows you everything in hexadecimal notation (when using the read command).

All that remains is to look at the example. Let's enable the phone's engineering menu.
All information will be presented in this form:
Opcode 47 "OK"
Field 1 50 "OK"
Field 2 1 "OK"
Field 3 68 "OK"
Field 4 1 "OK"
Field 5 (D) 247 "OK"
Otkat: Field 5 (D) 135
Results
F1:0

Now let's see what this all means:

After entering the engineering menu, enter 47 - the write command, click OK.
Let's look at Field fields:
"Field 1" is the memory cell number.
"Field 2" is the entry number.
"Field 3" is the byte from which to start displaying the contents of the record.
"Field 4" is the number of bytes that need to be displayed on the phone screen, starting from the one we specified in "Field 3".
"Field 5" is the actual value of the bit being searched for.
Otkat is the value of the "Field 5" field that must be entered to cancel the changes.
"Results F1:0" - you will see if everything went without problems.
After introducing all this into the phone, we reboot it and see that a menu item has appeared in Office Tools - technology.

We use command 32 in the same way.

Updated (11/13/2004): How to find out the rollback value yourself.

To do this we use command 32.
Let's look at the example of enabling/disabling additional vibration alerts:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "59" "OK"
Field 4 "1" "OK"
Field 5 (D) "252" "OK"
Results
F1:0

You have the above text, however the rollback value is not there. What to do?
We enter the same parameters into the phone, only with the read command:

Opcode "32" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "59" "OK"
Field 4 "1" "OK"
After introduction we get:
F1:0
F2(D) : 8c

(You may have a different value instead of 8c)

As I already said, the phone displays all information in hexadecimal number system. We convert 8c to the decimal system: we get 140. This is the rollback value!

Note: in Windows OS, take a regular calculator, make it an engineering calculator, set it to “Hex” - 16-digit system, type what you see on the display, press “Dec” - you get a number in the decimal system. Here are the codes for activating/disabling some menu items and more:

Enabling the 2nd SIM card:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "28" "OK"
Field 4 "1" "OK"
Field 5 (D) "169" "OK"
->Rollback: Field 5 (D) "168" "OK"
Results
F1:0
The "Preferred Card" will appear in Settings -> Other Settings -> Initial Setting.

To turn off the Operator Logo you need to make changes in 2 stages:

Stage 1:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "116" "OK"
Field 4 "1" "OK"
Field 5 (D) "016" "OK"
Rollback: Field 5 (D) "000" "OK"
Results
F1:0
Stage 2:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "75" "OK"
Field 4 "1" "OK"
Field 5 (D) "255" "OK"
Rollback: Field 5 (D) "191" "OK"
Results
F1:0

Disabling the line icon:
Go to the "Opcode" menu
Menu -> 048263*
Enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "31" "OK"
Field 4 "1" "OK"
Field 5 (D) "231" "OK"
Rollback: Field 5 (D) "247" "OK"
Results
F1:0

Disabling the date: (condition: presence of an activated GPRS service)
Enter the "Opcode" menu
Menu -> 048263*
Enter the values:
Opcode "47" "OK"
Field 1 "424" "OK"
Field 2 "1" "OK"
Field 3 "1" "OK"
Field 4 "1" "OK"
Field 5 (D) "032" "OK"
Rollback: Field 5 (D) "000" "OK"
Results
F1:0

Disabling the startup screensaver:
Enter the "Opcode" menu
Menu -> 048263*
Enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "29" "OK"
Field 4 "1" "OK"
Field 5 (D) "112" "OK"
Results
F1:0

Disabling the shutdown screensaver:
Enter the "Opcode" menu
Menu -> 048263*
Enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "70" "OK"
Field 4 "1" "OK"
Field 5 (D) "223" "OK"
Results
F1:0
>>If the Chat menu is disabled Field 5 (D) "255" "OK"

Enabling custom graphics:
Enter the "Opcode" menu
Menu -> 048263*
Enter the values:
Opcode "47" "OK"
Field 1 "74" "OK"
Field 2 "1" "OK"
Field 3 "35" "OK"
Field 4 "1" "OK"
Field 5 (D) "001" "OK"
Results
F1:0
Ha on: custwakeup.gif
Ha off: custgoodbye.gif

Turning off the melody and turning it on:
Enter the "Opcode" menu
Menu -> 048263*
Enter the values:
Opcode "47" "OK"
Field 1 "74" "OK"
Field 2 "1" "OK"
Field 3 "34" "OK"
Field 4 "1" "OK"
Field 5 (D) "000" "OK"
Results
F1:0

Turning the melody off:
Enter the "Opcode" menu
Menu -> 048263*
Enter the values:
Opcode "47" "OK"
Field 1 "74" "OK"
Field 2 "1" "OK"
Field 3 "36" "OK"
Field 4 "1" "OK"
Field 5 (D) "000" "OK"
Results
F1:0

Activating the Brightness menu:
Enter the "Opcode" menu
Menu -> 048263*
Enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "116" "OK"
Field 4 "1" "OK"
Field 5 (D) "064" "OK"
->Otkat: Field 5 (D) "000" "OK"
Results
F1:0

Instead of the date, a quick menu appears:
Enter the "Opcode" menu
Menu -> 048263*
Enter the values:
Opcode "47" "OK"
Field 1 "50" "OK"
Field 2 "1" "OK"
Field 3 "82" "OK"
Field 4 "1" "OK"
Field 5 (D) "163" "OK"
Rollback: Field 5 (D) "161" "OK"
Results
F1:0
The date disappears and the "quick menu" appears
In standby mode, deflecting the joystick results in a hit:
->right: Browser
->left: Recent calls
->uppx: CMC
->down: Directory

To activate other hidden items, you need to do the same thing, only you need to use the following codes:

47*50*1*8*1*036 - incl. dictaphone
47*50*1*8*1*032 - off. dictaphone

47*50*1*43*1*159 - incl. NETMONITOR (turns on: Menu 00**83786633* turns off: MENU 00**8378633*)
47*50*1*43*1*156 - off. NETMONITOR

47*50*1*44*1*016 - incl. menu item "roaming" (may not work, write that there is no space)
47*50*1*44*1*000 - off. menu item "roaming"

47*50*1*59*1*252 - new vibration alert modes will appear

47*50*1*62*1*169 - incl. strange empty menu item
47*50*1*62*1*137 - off. strange empty menu item

47*50*1*82*1*099 - incl. menu item "AIM" - " - a messaging system for corporations based on AIM, similar to ICQ.
47*50*1*82*1*035 - off. menu item "AIM

47*50*1*84*1*119 - incl. menu item "Mobile QQ"
47*50*1*84*1*115 - off. The menu item "Mobile QQ" is an instant messaging utility similar to ICQ. However, to use it you need to create an account on the server and register, as well as operator support

Service codes Motorola MPx200, MPx220, MPx100
*#**837# - Version info
*#**372# - FQC
*#**364# - Engineering menu
*#**266*0# - Set as data COM port
*#**266*1# - Set as log COM port
*#**797# - Time to failure timer & Power down code

*#**2263*0# - Set to default Band
*#**2263*1# - Disable GSM Band
*#**2263*2# - Disable DCS Band
*#**2263*3# - Disable EGSM and DCS Band
*#**2263*4# - Disable PCS Band
After entering, press the SEND button.

Service codes for Motorola E365
#02# - version of firmware, hardware, etc.
#09# - phone test

The remaining codes only work in "test mode". It can be unlocked using the Compal Service Tool program (what this program is and where to get it is written here) - go to Handset Specific. Click the Read Data button. We are waiting for the firmware version, FLEX, etc. to appear. Next, press the EFEM ON button. The Message window that opens when you start the program should say:

Trying to Write Data to MS...
EFEM Set OK!
Read Handset Specific Data Begin.
All "test mode" is turned on.
#08# - "expert menu"
#03# - network - RF signal level monitor (to disable the code, enter it again)
#04# - battery - monitor voltage levels at control points (to disable the code, enter it again)
**0108# - error counter control
**0101# - Test SIM auto answer
**0102# - reset all settings, melodies, address book, etc.
**0105# - exit "test mode"
**0106# - engineering menu
**0109# - reset the TFT counter (the value can be viewed by entering #02#)

Motorola C350 Service Codes
Service menu in Motorola C350
To enter the service menu, quickly press a combination of the following buttons:
Menu048263*
A command prompt should appear on the screen: Opcode:___________
Then you can enter commands, for example 54*18*1 - complete reset of the phone. (54* - mandatory start for all teams)
Teams:
0*0*0 - Select tone 0
0*0*1 - Select tone 1
0*0*2 - Select tone 2
0*0*3 - Select tone 3
0*0*4 - Select tone 4
0*0*5 - Select tone 5
0*0*6 - Select tone 6
0*0*7 - Select tone 7
0*0*8 - Select tone 8
0*0*9 - Select tone 9
0*0*124 - Select tone 1 KHz
0*0*125 - Select tone 2 KHz
0*0*126 - Select tone 3 KHz
0*0*127 - Select tone 4 KHz
0*1*X - Disable tone X
3*0*1 - Enable vibrator
3*0*0 - Disable vibrator
4*3*1 - Enable speech coder full rate Audio loopback
4*3*0 - Disable speech coder full rate
4*4*1 - Enable speech coder enhanced full rate
Troubleshooting C350 Series
4*4*0 - Disable speech coder enhanced full rate
4*5*1 - Enable speech coder half rate
4*5*0 - Disable speech coder half rate
5*0*0 - Set audio level 0 Audio level
5*0*1 - Set audio level 1
5*0*2 - Set audio level 2
5*0*3 - Set audio level 3
5*0*4 - Set audio level 4
5*0*5 - Set audio level 5
5*0*6 - Set audio level 6
5*0*7 - Set audio level 7
5*0*8 - Set audio level 8
5*0*9 - Set audio level 9
5*0*10 - Set audio level 10
5*0*11 - Set audio level 11
5*0*12 - Set audio level 12
5*0*13 - Set audio level 13
5*0*14 - Set audio level 14
5*0*15 - Set audio level 15
6*2*2*0*0 - Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute
6*4*6*0*0 - Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute
10*0*3 - Set band GSM 900
10*0*4 - Set band DCS 1800
10*0*5 - Set band PCS 1900
10*0*6 - Set dual band GSM 900 / 1800
10*1*0 - Read band 3= GSM 4= DCS 5= PCS 6 =GSM/DCS
18*0 - Initialize non-volatile memory (Master Reset)
18*1 - Initialize Non-volatile memory (Master Clear)
20*X*0 - Load Channel number X Select Channel (Used for debugging Rx mode)
20*1*0 - Load channel number 1 GSM Low channel
20*62*0 - Load channel number 62 GSM Mid channel
20*124*0 - Load channel number 124 GSM High channel
20*512*0 - Load channel number 512 DCS Low channel
20*700*0 - Load channel number 700 DCS Mid channel
20*885*0 - Load channel number 885 CDS High channel
20*512*0 - Load channel number 512 PCS Low channel
20*661*0 - Load channel number 661 PCS Mid channel
20*810*0 - Load channel number 810 PCS High channel
55*2*001 - Test Display. All pixels ON
55*2*000 - Test Display. All pixels OFF
55*2*002 - Test Display. Checkerboard pattern A
Table 2. Manual Test Commands (Continued)
Key Sequence Test Function/Name Remarks
Level 1 and 2 Service Manual Troubleshooting
55*2*003 - Test Display. Checkerboard pattern B
55*2*004 - Test Display. Border pixels ON
*#06# - IMEI Check No Test Mode Required

Enabling the netmonitor: Menu 00**83786633*
TURNING OFF THE NAT MONITOR: MENU 00**8378633*
you have to press very quickly. turn off the handset, and it appears every time you turn it on.
Exit to menu/back: menu-left soft button

ANDROID CODES FOR Motorola Moto X Force

*#06# - show IMEI Motorola Moto X Force IMEI is a unique number of a mobile device that is assigned to it at the time of release. Using this number you can track, for example, the location of a stolen phone or tablet. The IMEI number typically consists of 15 digits, which are unique to each mobile device.

*#8888# - shows Hardware Version Motorola Moto X Force

*#9999# - show the firmware version of Motorola Moto X Force

*#8999*8376263 - Motorola Moto X Force firmware data

*#8999*324# - various technical data

*#8999*636# - technical specifications of Motorola Moto X Force

*#8999*523# - display contrast, the same as through the main phone menu

*#0523# - contrast

*#2255# - call log of Motorola Moto X Force

*#0837# - display the software version

*#0001# - show serial number

#*7337# - unlock Motorola Moto X Force

*#8999*377# - Motorola Moto X Force error log

*#4777*8665# - setting up GPRS Motorola Moto X Force

*#0020# - setting the default menu language

*#0007# - sets the text mode to Russian

*#9125# - setting emoticon modes in charging mode

*#7465625# - block list

*7465625*638*# - network blocking

*#9998*228# - battery status (capacity, voltage, temperature)

*#9998*246# - software status of Motorola Moto X Force

*#9998*289# - change the alarm frequency

*#9998*324# - debugging screen

*#9998*364# - Watchdog

*#9998*544# - Jig detect

*#9998*636# - Motorola Moto X Force memory status

*#9998*746# - SIM file size

*#9998*837# - Motorola Moto X Force software version

*#9998*842# - Motorola Moto X Force vibration test

*#9998*872# - diagnostics of Motorola Moto X Force

*#8999*8378# or *#8999*test# -Test Mode

*#9998*999# - last check

*#9998*523# - contrast

*#9998*947# - reset in case of a critical error (entered without a SIM card, deletes all files, may cause the camera to malfunction)

*2767*3855# - full EEROM reset (SP unlock, but can change phone IMEI)

*2767*2878# - user reset EEPROM

*#0228# - find out battery temperature, type and charge of Motorola Moto X Force

*#9998*JAVA# - JAVA - CSD and GPRS settings for the Internet Motorola Moto X Force

*#9998*VERNAME# - extended information about firmware, hardware, time and date of software creation, etc.

STANDARD GSM CODES FOR Motorola Moto X Force

Change PIN - **04*, then enter the old PIN, and the new PIN twice.
Change PIN2 - **042*, then enter the old PIN2, and the new PIN2 twice.
Unlock SIM card (PIN) - **05*, then enter PUK and new PIN twice
Unlock SIM card (PIN2) - **052*, then enter PUK2 and new PIN2 twice

Motorola Moto X Force call forwarding (you must order the service from your operator)
Cancel all forwardings - ##002#
Cancel all conditional redirects - ##004#
Activate all conditional forwardings - **004*Phone number#

Unconditional forwarding (forwarding all calls)
Turn off and deactivate - ##21#
Deactivate - #21#
Enable and activate - **21*Phone number#
Enable - *21#
Check status - *#21#

Forwarding in case of "no answer"
Turn off and deactivate - ##61#
Deactivate - #61#
Enable and activate - **61*Phone number#
Enable - *61#
Check status - *#61#

Setting the call time before the "no answer" call forwarding is triggered
When setting up call forwarding on "no answer", you can set the time in seconds that the system gives you to pick up the phone. If you do not pick up the phone during this time, the incoming call will be forwarded.
Example: - **61*+709576617601234**30# - sets the wait time to 30 seconds
Set the waiting time - **61*Phone number**N# , N=5..30 (seconds)
Remove previous installation - ##61#

Forwarding in case of "not available"
Turn off and deactivate - ##62#
Deactivate - #62#
Enable and activate - **62*Phone number#
Enable - *62#
Check status - *#62#

Forwarding when busy
Turn off and deactivate - ##67#
Deactivate - #67#
Enable and activate - **67*Phone number #
Enable - *67#
Check status - *#67#

Call barring (you must order the service from your operator)
Change password for all prohibitions (default - 0000)
- **03*330*old password*new password*new password#

Activate - **33*password#
Deactivate - #33*password#
Check status - *#33#

Barring all calls on Motorola Moto X Force
Activate - **330*password#
Deactivate - #330*password#
Check status - *#330#

Barring all outgoing international calls on Motorola Moto X Force
Activate - **331*password#
Deactivate - #331*password#
Check status - *#331#

Barring all outgoing calls on Motorola Moto X Force
Activate - **333*password#
Deactivate - #333*password#
Check status - *#333#

Barring all incoming calls on Motorola Moto X Force
Activate - **353*password#
Deactivate - #353*password#
Check status - *#353#

Barring all incoming calls when roaming
Activate - **351*password#
Deactivate - #351*password#
Check status - *#351#

Motorola Moto X Force call waiting (you must order the service from your operator)
Activate - *43#
Deactivate - #43#
Check status - *#43#

Send your phone number (Anti Caller ID)
Deny - #30#phone number
Allow - *30#phone number
Check status - *#30#

Display the phone number of the person calling you (Caller ID)
Deny - #77#
Allow - *77#
Check status - *#77#

Questions about Motorola Moto X Force secret codes

Ask a question about secret codes on Motorola Moto X Force

Motorola Moto X Force is an American smartphone that runs Android 5.1 and has 5 points out of 5. Here you can download firmware, find out the characteristics, how to reset the settings and get root rights. This smartphone is high-performance.

Root Motorola Moto X Force 64Gb

How to get root for Motorola Moto X Force 64Gb see instructions below.

Below are universal programs for obtaining root rights for devices on Qualcomm Snapdragon

(need PC)
(Root using PC)
(popular)
(root in one click)

If you were unable to obtain superuser (root) rights or the program did not appear (you can install it yourself) - ask a question in the topic. You may need to flash a custom kernel.

Characteristics

Battery capacity: 3760 mAh
Talk time: 48h
Wireless charging function: yes
Features: thickness: 7.6 mm - 9.2 mm
Type: smartphone
Weight: 169 g
Controls: on-screen buttons
Design: waterproof
Operating system: Android 5.1
Case type: classic
Number of SIM cards: 1
Dimensions (WxHxD): 78x149.8x9.2 mm
SIM card type: nano SIM
Screen type: color AMOLED, touch
Touch screen type: multi-touch, capacitive
Diagonal: 5.4 inches.
Image size: 2560x1440
Pixels per inch (PPI): 544
Automatic screen rotation: yes
Aperture: F/2
Camera: 21 million pixels, LED flash (front and rear)
Camera functions: autofocus
Video recording: yes
Max. video resolution: 3840x2160
Front camera: yes, 5 million pixels.
Audio: MP3
Headphone Jack: 3.5mm
Max. Video frame rate: 30fps
Interfaces: Wi-Fi 802.11ac, Bluetooth 4.1, IRDA, USB, NFC
Standard: GSM 900/1800/1900, 3G, 4G LTE, LTE-A Cat. 6
Satellite navigation: GPS
A-GPS system: yes
LTE bands support: band 1, 2, 3, 4, 5, 7, 8, 12, 17, 20, 25, 28, 40
Processor: Qualcomm Snapdragon 810, 2000 MHz
Number of processor cores: 8
Built-in memory: 64 GB
RAM capacity: 3 GB
Video processor: Adreno 430
Memory card slot: yes, up to 2048 GB
Control: voice dialing, voice control
Sensors: light, proximity, gyroscope
Speakerphone (built-in speaker): yes
Airplane mode: yes

Firmware for Motorola Moto X Force 64Gb

Official Android 5.1 firmware [stock ROM file] -
Motorola custom firmware -

Firmware for Motorola Moto X Force 64Gb can be done in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Don’t forget to write a 4-10 line review about your smartphone in the subject line, this is important. The official Motorola website, unfortunately, will not help solve this problem, but we will solve it for free. This Motorola model has a Qualcomm Snapdragon 810, 2000 MHz on board, so there are the following flashing methods:

Recovery - flashing directly on the device
A special utility from the manufacturer, or

We recommend the first method.

What custom firmware are there?

CM - CyanogenMod
LineageOS
Paranoid Android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK(MoKee)
FlymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and shortcomings of a Motorola smartphone and how to fix them?

If the Moto X Force does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
If stuck during update / stuck when turned on (needs flashing, 100%)
Doesn't charge (usually hardware problems)
Does not see the SIM card (SIM card)
The camera does not work (mostly hardware problems)
The sensor does not work (depends on the situation)

For all these problems, contact (you just need to create a topic), specialists will help for free.

Hard Reset for Motorola Moto X Force 64Gb

Instructions on how to do a Hard Reset on Motorola Moto X Force 64Gb (factory reset). We recommend that you familiarize yourself with the visual guide called on Android. .

Reset codes (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off your device -> go to Recovery
"wipe data/factory reset"
“yes - delete all user data” -> “Reboot System”

How to log into Recovery?

hold down Vol(-) [volume down], or Vol(+) [volume up] and the Power button
A menu with the Android logo will appear. That's it, you are in Recovery!

Reset settings on Motorola Moto X Force 64Gb You can do it in a very simple way:

Settings->Backup and reset
Reset settings (at the very bottom)

How to reset a pattern key

How to reset the pattern key if you forgot it and now cannot unlock your Motorola smartphone. On the Moto X Force 64Gb model, the key or PIN code can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -