Samsung galaxy s7 firmware Chinese. Installing official firmware on Samsung Galaxy S7 Exynos Galaxy s7 w3bsit3-dns.com firmware

Firmware for Samsung Galaxy S7 (clone), flashing a Chinese copy of Samsung Galaxy S7. The subject of discussion belongs to the category: Firmware
Copy of Samsung Galaxy S7 Edge

Copy of Samsung Galaxy S7 Edge

Review of Samsung Galaxy S7 edge.
Review of the game Subway Surfers.
Elephone S3 review.
Review of UMI Super.

Samsung Galaxy S7 Neo.
- MediaTek Helio X25 / 4 Gb.
- MediaTek Helio X25 / 3 Gb.
Regular clones (under-smartphones)
- If you are looking for firmware, you need to provide the following information:
1) brand and model of smartphone;
2) technical specifications (you can get them from MTK Droid Tools.

3) it is advisable to publish a photo (upload here).
samsung galaxy S7 clone SM - G920F - Download.
Build number: ALPS.JB3.MP.V1.
Build date UTC: 20161125-141343.

Kernel v: 3.4.39-2217357 (dpi@DELL134) version (gcc version 4.6.x-google 20120106(prerelease)(GCC)) (cs@dell36-PowerEdge-R710) (gcc version 4.6.x-google 20120106 (prerelease ) (GCC)) #1 SMP Thu Nov 28 20:23:43 KST 2013.

LCD Driver IC: 1-st7701_fwvga_boe.
- SP Flash Tool errors and solutions (if you have problems working with SP Flashtool)
If after the firmware IMEI has disappeared, what should I do?

Where to get it or how to build a custom Recovery?
If after flashing the screen does not display the picture (stripes, etc.)
- You have selected the wrong firmware for the LCD Driver parameter, indicate the LCD Driver version and the guys in the thread will try to help.
What to do if the preloader is lost?
- read the instructions in case the preloader is lost.
Post edited by TexnoMozg - May 20, 2017 00:30.

Post edited by TexnoMozg - August 27, 2016 00:32.

In the settings it says that the device name is Galaxy s7, and the model says SM-G920F.
You won't get far with that kind of data. The original will show similar data.

You look at the data from MTKDroidTools, if the program detects your device and shows the data - 100% clone, and then we’ll figure it out further.
MTK Droid does not detect my phone. I can only send information from CPU-Z.

If the body is cut off on MDT, then the preloader is alive and adb is running and the fastboot will start.
So get into the build prop first and stupidly google for the firmware.
Well, unless of course they first demolished everything to hell in a purely noobish way.

That's when the preloader is demolished - this is already a problem, what to sew if under the battery there is an iron frame with stamping f11)
so if anyone here is a sucker, it’s me who took over this body(
Damn, you need an adb driver, and it doesn’t see 64 percent - 92, 95, 35, 52, 53.
92 95 sees, lied(
92 95 sees, lied(
It sees, but does not work with them. It is enough to remove data. I saw Meizu MX3 on Samsung Exynos 5 Octa 5410.
If you want to do something well, do it yourself. (Ferdinand Porsche).

This is a collection of low-level configuration information for 572 unique Android installations. The raw dataset is available here.
Begin exploring it here, or check out the source code on GitHub (client, server).
Another Android device data set is the Android Device Inventory.

There is a utility for reading build props.
Post edited by TexnoMozg - September 3, 2016 00:20.
I once installed it out of necessity, but then took it down - it’s just an infection.
Post edited by TexnoMozg - September 3, 2016 00:21.

This is all good, but does not fit with the problems described above. If the situation is such that MTKDroidTools does not see the device, then other utilities will also not be able to do this due to hardware limitations, not software ones. If there is no connection with the hardware component, the software will not be able to perform the role of a maintenance link.

It's good that it exists. However, it is better to answer on the subject of a topic or a specific post, and not in general, to the extent of knowledge in some area. Those. without taking it out of context.
Previously, about 11-12 years ago, the sellers themselves provided the firmware (sources). Well, and not least important for the availability of firmware is the uniqueness of the body - if it is a fake clone, the manufacturer simply does not shine.
Well, most of the available firmwares are ROMs in zip format.
when neither the information in the body is no longer available/broken, nor the information from the build prop.
you need to have aerobatics, merge the firmware and find the markings in it, use it to determine the percentage, etc.
I didn’t see the K50t5 at 52 at close range, although it was sutured) first (internal version on ####5993# a7000 a usr s134 1505051536 mp6 v3 len ovo6752 bmain row, and then it was polished on top with vibeui v2.5 1512 5 495 1 st.

Build date UTC: 20160624-072902.
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P4, 2016/04/16 09:00.
Kernel v: 3.4.39-2217357 (dpi@DELL134) version (gcc version 4.6.x-google 20120106(prerelease)(GCC)) (cs@xhldell-PowerEdge-T620) (gcc version 4.6.x-google 20120106 (prerelease ) (GCC)) #1 SMP Thu Nov 28 20:23:43 KST 2013.

In the settings it says that the device name is Galaxy s7, and the model says SM-G920F.
Build number: KOT49H.G900FXXU1ANC9.
Build date UTC: 20150115-034649.
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P4, 2014/07/08 10:19.
Kernel v: 3.4.39-2217357 (dpi@DELL134) version (gcc version 4.6.x-google 20120106(prerelease)(GCC)) (xhldell@xhldell-PowerEdge-T620) (gcc version 4.6.x-google 20120106 (prerelease ) (GCC)) #1 SMP Thu Nov 28 20:23:43 KST 2013.
LCD Driver IC: 1-nt35512_dsi_vdo_lcm_drv.
Post edited by kovaxx21 - September 6, 2016 20:10.

If you want to do something well, do it yourself. (Ferdinand Porsche).
Here is the information from CPU-Z:
Architecture: 4x ARM Cortex-A7 @ 1.30 GHz.
Total RAM: 453MB.
Internal Storage: 1.45 GB.
Release Date: 2016-03-01.
Build ID: JZO54K.G935FXXANC2.
Java VM: ART 2.1.0.

Kernel architecture: armv7I.
Kernel v: 3.10.72 (1461916388)
Post edited by TexnoMozg - September 10, 2016 00:29.
If you want to do something well, do it yourself. (Ferdinand Porsche).

We are waiting for the details to arrive. Nothing to say yet.
Post edited by TexnoMozg - September 18, 2016 23:52.

If you want to do something well, do it yourself. (Ferdinand Porsche).

Instructions for installing the official single-file firmware on the Samsung Galaxy S7 (SM-G930x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy S7 and return the phone’s status (“Settings” > “About device” > “Properties” > “Device status”) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air, just follow the instructions provided.

Installation instructions

Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

Reset your device.
To do this, go to the settings section " Backup and factory reset", select the item " Reset data» > « Reset the device", enter the PIN code (if one is set) and click on the button " Delete everything" The phone will reboot.

Run Odin PC as administrator.

Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin the message “ COM».

Click on the “ AP» and select the TAR firmware archive.

Items " Auto Reboot" And " F.Reset Time"should be activated, A " Re-Partition"if active - must be disabled.

Click on the “ Start" The firmware installation process will begin.

At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be rebooted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and after - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

Instructions for flashing the Samsung Galaxy S7 SM-G930 smartphone to the new official or custom firmware. Obtaining Root superuser rights on Samsung Galaxy S7 SM-G930, installing custom recovery TWRP recovery.

How to flash Samsung Galaxy S7 SM-G930 to the official firmware using the Odin flasher program? In order to install new firmware on your smartphone, you first need to download several files to your PC:

Then you need to download any firmware for Samsung Galaxy S7 SM-G930 that you like, for example:

Decoding of models:

Operator models:
SM-G930T (T-Mobile)
SM-G930A (AT&T)
SM-G930P (Sprint)
SM-G930V (Verizon)
SM-G930R4 (US Cellular)
Regional models:
SM-G930I (Australia)
SM-G930F (Europe)
SM-G930G (International)
The prefix D in the model means dual-SIM (Duos)

After you have downloaded everything, unpack the archive with the driver for the Samsung Galaxy S7 SM-G930 and install it. Then unpack the archive with Odin and the firmware.
Run the Galaxy S7 Odin firmware program as administrator. To do this, hover over Odin and right-click and select "Run as administrator", then click "Yes".

After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the field "BL"
The AP……….tar.md5 file is inserted into the field "AP"
The file CP……….tar.md5 is inserted into the field "CP"
The CSC file……..tar.md5 is inserted into the field "CSC"

We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"

We put the Samsung Galaxy S7 SM-G930 phone into firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful firmware, the device will reboot automatically and the message “Finish” will appear in the Odin program. That's it!

Instructions for installing custom recovery TWRP recovery on Samsung Galaxy S7 (SM-G930)

To install custom recovery TWRP Recovery on a Samsung Galaxy S7 SM-G930 smartphone, you first need to download the USB driver and install them - SAMSUNG USB Driver (if you haven’t already done so).
Download and unpack the firmware program – Odin
Download the latest version of TWRP for SM-G930F (herolte) from this TWRP SG S7 repository in .img (Image) / .img.tar (for Odin program) format
In the smartphone settings, enable “USB Debugging” + OEM Unlocking in the “For Developers” settings section, which in turn opens if you click 7-10 times on the “Build Number” item in “About phone” settings section
Then turn off the smartphone and go to the “Download Mode” firmware mode. To do this, with the phone turned off, simultaneously hold down the “Volume Down”, “Home” and “Power” buttons.
Before you enter the firmware mode, the phone will display a “Warning”, press “Volume +” to skip.
Connect your Samsung Galaxy S7 SM-G930 phone to your computer using a standard USB cable.
Launch Odin (previously downloaded and unpacked) and wait for the inscription “Added” (“Added” / “Connected”), and if the inscription does not appear, repeat the previous steps.
After you see the “Added” message, click on the “AP” button and find the previously downloaded TWRP files.
Check the “Auto-Reboot” checkbox
Go to TWRP and flash this file – no-verity-opt-encrypt (it is for normal operation of TWRP)

All!! Your Samsung Galaxy S7 smartphone has a custom TWRP recovery installed.

Installing custom firmware on Samsung Galaxy S7 SM-G930

To install custom firmware on a Samsung Galaxy S7 SM-G930 phone, you must have custom recovery TWRP Recovery, if you don’t have it, see the point above.

Today we will talk about how to flash Samsung Galaxy S7 and Galaxy S7 Edge. This guide covers basic issues related to the process of flashing a smartphone.

Important note: you will carry out all actions at your own peril and risk; the authors do not bear any responsibility for the possible consequences of operations with the device. If you are not sure, contact a specialist.

Actually, there are three firmware options for the Samsung Galaxy S7 and Galaxy S7 Edge:

1. “On the fly” - used only to install updates automatically. Not suitable for unlocked carrier versions.
2. Through the Samsung Kies program. This option is suitable for installing updates in cases where on-the-fly installation does not work for some reason, and for restoring the factory firmware.
3. Using ODIN software. Used to install both original and modified and third-party firmware.

We will omit the first two options due to their simplicity and clarity. Let's talk about something else.

How to flash Samsung Galaxy S7 using ODIN

PC requirements: Windows XP SP3 or later. Your Samsung Galaxy S7 or Galaxy S7 Edge should be charged at least 30%, and preferably 100%.

Stage No. 1. Disable "Remote Control"

To successfully install new firmware on a smartphone in the ODIN program, you must disable the device activation lock. Otherwise, the firmware process will end with an error. In new Samsung smartphones based on Android 6.0, this setting is called “Remote control”.

Procedure:

a) Go to the “Settings” -> “Lock screen and protection” section.

b) Go to the “Find phone” subsection.

d) Disable the “Remote control” option.

See the original of this part of the instructions.

Stage No. 2. Install original Samsung drivers

At this stage, we install original drivers for Samsung mobile devices based on Android OS. Download options:

1. Samsung Android USB Driver for Windows (drivers only) - link.
2. Samsung KIES (PC synchronization software) - link.
3. Samsung SmartSwitch (software for transferring data from one smartphone to another) - link.
4. SideSync (software for screen sharing and data exchange with a PC) - link.

If you already have some of this installed, it would be a good idea to check that the version is up to date.

Before installing the driver, connect your smartphone to your PC.

Stage No. 3. Reboot

This stage is desirable for correct driver installation.

Stage No. 4. Checking whether the driver is installed correctly

Connect your smartphone using a USB cable to your PC and check for a new device in Device Manager. Also, your Samsung Galaxy S7 should appear in “My Computer”.

If this does not happen, try replacing the cable with another one (preferably the original one) or change the USB port (if you have a desktop PC, try the ports directly on the motherboard).

Important: After checking, you need to turn off your smartphone!

Stage No. 5. Download ODIN

Despite the fact that there are many sites on the Internet offering to download ODIN software, we recommend doing this only from trusted resources:

Stage No. 6. Download the firmware

We can’t say anything specific here, it all depends on what firmware you want to install. The entire database of original firmware for Samsung smartphones is available on the Samsung Updates website.

It is advisable to unpack the firmware to the root of the disk. At least in the path to the firmware file there should not be any other characters except Latin and numbers (no Cyrillic, spaces, etc.). Underscores are acceptable.

Stage No. 7. Launch ODIN

Unpack the archive with ODIN software and run the program.

Stage No. 8. Activate bootloader mode

Turn off the Samsung Galaxy S7/Galaxy S7 Edge using the “Power” button. Next:

1. Press and hold 3 buttons at the same time: “Home”, “Volume Down” and “Power”.
2. We wait for the image to appear on the device screen.
3. Release all three buttons.
4. Press the “Volume Up” button once.

Stage No. 9. Connecting a smartphone

In this step, we connect the smartphone to the PC using a USB cable. Wait for the driver to be installed and the smartphone to be identified in the ODIN program. This will be indicated by the highlighted ID:COM field with the port number. In the example below - “-0:-” (the port number may differ in your case).

Stage No. 10. Setting up ODIN

Open the “Options” tab in ODIN and check the “Auto Reboot” and “F. Reset Time". They're usually enabled by default, but it's a good idea to check. The ODIN setup can generally be done before connecting the smartphone.

Stage No. 11. Connecting the firmware files

Go back to the “Log” tab in ODIN and connect the firmware files strictly in the specified order:

1. in the BL field -> file BL***tar.md5
2. in the AP field -> file AP***tar.md5
3. in the CP field -> file CP***tar.md5
4. in the CSC field -> file CSC***tar.md5 (completely clearing smartphone data to the “out of the box” state) or HOME_CSC………tar.md5 (saving user data on the smartphone)

Stage No. 12. Starting the firmware process

Click on the “START” button and watch the process of flashing the Galaxy S7/Galaxy S7 Edge firmware.

Often, many of you have encountered the fact that your phone, which has served you faithfully, suddenly began to slow down, stopped working properly, or caught a serious virus from which there was no way to get rid of it.

Then make yourself more comfortable. Now we will tell you how to get rid of all these problems with your phone by flashing its operating system.

If this program does not work on this device, you can try to backup your data using the official Samsung data backup program " ".

Attention!!! We are forced to warn you that flashing a smartphone's firmware is a very serious and dangerous process, and if you do something wrong, your smartphone may turn into a brick. WE ARE NOT RESPONSIBLE for all your manipulations with your smartphone, everything you do is done at your own peril and risk, it all depends on how straight your hands are.

If you are not sure that you can perform this procedure, contact a specialist.

Firmware for Samsung S7 Edge via ODIN program

So we will divide our entire process into several stages:

Disable Remote Control

Before you start flashing the firmware, you will need to disable device activation lock in the phone settings; if you do not do this, the process may end with an error. In newer Android devices, this feature is called "Remote Control".

• So we need to go to the “Settings” window, then “Lock screen and protection”.

• Next we need to go to the “Find phone” subsection.

• Here we log in using our Samsung account details.

• In this section we disable the "Remote control" option.

Install original drivers from Samsung on PC

So at this stage we will need to install original Samsung drivers for mobile TV devices.

If you already have these programs installed, then it would be a good idea to double-check for updates. Before installing drivers, connect your smartphone to your PC. After you have installed the drivers, restart your PC.

Checking for correct installation and operation of drivers

Connect the cable to your phone and if the PC recognizes your phone, then everything is installed correctly. If the computer does not see the phone from the original cable, then try changing the cable.

Download the firmware

Download the firmware to your PC and unpack the archive. As for what firmware to download, we cannot tell you, you need to look in the settings of your smartphone for the version of your firmware, you can see the entire set of firmware -

Download the ODIN Flasher

To install the firmware you will need to download the program " ODIN" in which you will flash your smartphone, for S7 Edge download the version "ODIN" not less than 3.12 -

Important!!! never download the Russified version" ODIN"- this will turn your smartphone into a brick. Next, unpack the archive and launch the program.

Try to preferably unpack the firmware files to the root of the disk. Launch ODIN Unpack the file with the flash driver and run the "ODIN" program.

Activate bootloader mode

Turn off the smartphone using the "Power" button:

• Press and hold 3 buttons at the same time: “Home”, “Volume Down” and “Power”.
• We are waiting for the image to appear on the screen of our device.
• Let's release all buttons.
• Press the "Volume Up" button once.

We connect our smartphone to the PC

Go back to the Log tab and connect the downloaded firmware files in the specified order:

1. BL> install the file BL******tar.md5
2. AP> install the file AP******tar.md5
3. CP > install the file CP******tar.md5
4. CSC> install the file CSC*****tar.md5

Starting the firmware process

Completing the download process

After the download is complete, a “PASS!” notification will appear, which will indicate the completion of the download process. After this, the smartphone will reboot automatically. Disconnect the cable and wait for the smartphone to reboot