Wi-Fi byfly technology. How to set up a byfly modem. What is required to configure the M200a modem for ByFly subscribers
The method for setting up home Wi-Fi depends on the selected equipment. A wireless network is organized using one of two methods: a direct connection of a telephone cable to a Wi-Fi router with ADSL support or a serial connection between a modem and a regular router.
Setup by a Byfly specialist
The Byfly provider provides the ability to set up a Wi-Fi router for free when connected. It is performed by company specialists, visiting the client. According to the terms of the contract, such adjustment is made only once. If in the future the router settings are reset or they need to be changed, you can order a paid service for setting up Wi-Fi.
Pay attention! If necessary, the client device is provided to Byfly users for rent, without making any additional payment.
Wi-Fi access cards
Byfly has developed a prepaid access system for using a wireless network in public places. After authorization at any Bayfly point in Belarus, the login page will open in the browser. If you have already purchased a Wi-Fi card, scratch off the protective coating on the back. Enter the login and password that are below it in the “Authorization” section.
Wi-Fi can also be accessed without a physical Byfly card. Moreover, 15 minutes of wireless Internet use are provided free of charge. You can pay for more minutes on the same page using a bank card. To do this, enter your mobile phone number in the text field on the right and select the required time.
Advice! Avoid mistakes when entering a phone number. If you pay for Wi-Fi with a plastic card, the details for connecting to Byfly will be sent via SMS to the specified number.
Tutorial video: How to set up Wi-Fi on ByFly
Self-configuration of Wi-Fi router
Divide the telephone line laid into the premises using an ADSL filter (splitter). Such adapters are usually included with modems and ADSL routers. They allow you to separate Byfly Internet data and voice frequencies. The filter outputs are labeled, such as "Modem" and "Phone". Connect the devices to the appropriate connectors.
If your Byfly provider provides an ADSL router, connect a cable between the filter and the router. Connect the device to your computer via the Ethernet output. When using a separate modem and Wi-Fi router, connect the devices in the following sequence:
- Insert the telephone cable connected to the splitter into the “Line” connector on the modem.
- Connect the modem and router with a UTP cable. On the router, use a separate connector, which is usually indicated in blue.
- Connect the router to the computer through any of the remaining ports.
Plug in the equipment and go to the control panel through any browser. The address for logging into the web interface is indicated on a sticker or in the instructions for the router. The default account information is also located there. Enter your username and password in the login window.
The menu path for setting up Wi-Fi depends on the model of equipment used. On the popular D-Link DSL-2640U ADSL router, you can configure a wireless network for Byfly in the “Wireless” section. On the “Basic” tab, make sure that “Enable Wireless” is active (checked). If you want to make a hidden Wi-Fi network, check the “Hide Access Point” checkbox. In the “SSID” field, enter the desired name.
Usually connecting WiFi ByFly does not cause any particular difficulties. However, some users have difficulty setting up their modem or router. We will discuss how to connect ByFly WiFi further. The questions proposed for consideration are standard, and the popular modification “Promsvyaz-M200” will be highlighted as the router model under consideration. For ByFly, setting up a modem is not the most difficult operation. But first things first.
How to connect ByFly WiFi: necessary primary conditions
First of all, when concluding an agreement for the provision of services, pay attention to the indication in it of specific data such as login and password that will be used when connecting to the network.
The second point is related to the equipment received from the provider. First you just need to connect the router to your computer and install drivers for it. If the operating system did not install automatically, you need to use a special disk that contains all the necessary software. It must be included when purchasing the main equipment.
Finally, you should make sure that your laptop or desktop computer has a WiFi wireless module, the appropriate drivers are installed for it, and it is working normally. You understand that without such a module in the system and drivers installed for it, there is no need to talk about a wireless connection. Separately, please note that on some laptop models, communication can be enabled using a special switch on the side panels, keyboard shortcuts using FN, or some other method. This is very important, since further consideration of the issue of an Internet connection without this makes no sense.
Checking the connection diagram
As a rule, in the question of how to connect ByFly WiFi, connecting the modules should not be a problem either. For these purposes, a standard cable with RJ-45 connectors, also called a patch cord, is used.
On ByFly? It's simple. The provider cable is connected to the main device, but to configure the device itself you will have to use a direct connection to the terminal initially. This is only necessary at the first stage of setting the required parameter values, and will not be required later. After saving the settings, they will be applied to the entire virtual network.
Setting up WiFi on ByFly Promsvyaz
So, the circuit is turned on and working. The first step in solving the problem of how to set up WiFi on ByFly will be to enter the router interface, which, in fact, will be responsible for providing communication.
To do this, we use any web browser installed on the system (even the same Internet Explorer or Edge, present in Windows 10). Nothing much depends on this type of software.
Interface access
Now for ByFly WiFi modem configuration will be carried out according to the diagram below. Enter 192.168.1.1 in the address bar. In the standard configuration, admin is used as the login and password. If the router gives an error for some reason, the settings can be reset by pressing the corresponding button on the back of the device or disconnecting it from the electrical network for about 10-15 seconds.
Some users advise maintaining a longer interval (about 15 minutes), but I think this is not necessary.
Now the question of how to set up WiFi on ByFly comes to the most basic part. We entered the router interface. We use the Interface Setup tab, where initially you need to set the connection type to PPPoE (ISP field).
At this stage, the question boils down to the following: you will need to enter the login and password that were specified in the contract. Next, which is very important, you need to set activation in the Bridge Inetrface field (check the Activated box).
Similar actions are performed for the Default Route line with reconnection on demand set at 30 minutes.
Save the changes and go to the Wireless tab. Now setting up WiFi ByFly (“Promsvyaz” modem is just taken as an example) involves entering the following parameters:
- activate Access Point;
- set Broadcast SSID to Yes;
- in the SSID network name field, enter any arbitrary name;
- in the authentication type select PSK2-WPA;
- In the Pre-shared key field, enter the created connection access password;
- save the changes by clicking the Save button.
System Settings
In theory, after all the operations performed, both the connection and the network should work. But it also happens that the operating system does not accept the automatically installed settings. In this case, the question of how to connect ByFly WiFi will come down to changing some parameters of the network adapter.
To do this, you will need to enter the network and sharing management section, which is located in the standard “Control Panel” (you can also call it with the ncpa.cpl command from the “Run” console).
Here you need to select the desired network connection and go to the section for changing the properties of the network adapter. In the network properties, select the IPv4 protocol settings (as a rule, the main connection option uses the fourth version, not the sixth).
For the gateway we set 192.168.1.1, and for our own internal address we change the last digit to 2. Receiving DNS addresses, if everything works, can be left to receive settings automatically.
What to do if DNS doesn't work?
But what to do when the connection does not work even with automatically configured settings? In most cases, the problem of how to connect ByFly WiFi can be solved by setting DNS server addresses manually.
This means specifying parameters from the configuration of fours and eights based on free Google services. Don't like this option? Use Yandex settings or simply perform a full reset with clearing the DNS cache in the ipconfig /flushdns command line.
After executing the command, it is advisable to reboot the system and make sure it is working.
Proxy preference issues
Along the way, it is worth noting the fact that in some systems the use of proxy servers for local addresses is enabled by default. This setting affects the network and access to computers located on it.
In the IP protocol settings, you need to go to additional options and disable the use of a proxy, if this is not provided for by the communication settings of the provider itself. It is doubtful, of course, that a proxy is initially used, however, it does not hurt to check the settings. In addition, you can even experiment with addresses. You can enter the IP manually, but only in such a way that it differs from the gateway address by at least four to five tens. That is, if the last digit of the router is 0 or 1, the address of the computer must include the value 40 or 50 at the end.
Finally, another reason why the connection is not working could be the use of a VPN. At least at the stage of accessing unblocked resources, it is advisable to disable this function. And the Internet speed will be higher, and the waiting period for a response from the site will be reduced, otherwise you will just end up with a 504 error like Gateway Timeout, which indicates the unavailability of the main gateway, or, more simply, the router itself, which is what the router or modem is.
Brief summary
As you can already understand from all the material presented above, the WiFi ByFly connection itself is not particularly complicated. In principle, all actions are very much reminiscent of connecting to the Rostelecom provider (at least the main parameters of the router and its settings used look the same). The only difference is that the first operator very often uses the Bridge scheme, and the second is based on the network operating in PPPoE mode. Otherwise, having understood these simple rules for setting up a connection, you can apply them to any devices and operators (providers) if for some reason automatic setting of parameters is impossible.
Not everyone has the opportunity to connect to the Internet via fiber optic cable or twisted pair, and in an office, home or apartment, to connect several devices, you should use a wireless connection method (WiFi) to one network with the ability for each of them to access the Internet. If this connection method is not suitable for a computer with Windows 7, then using ByFly broadband on a laptop is the best option. Today we’ll look at how to set up Wi-Fi on a laptop running Windows 7.
Set network card parameters
First of all, you need to configure the network adapter.
- Go to the “Network Control Center”.
- Go to the menu for editing adapter parameters.
- In the properties of the active connection, select the TCP/IP version 4 protocol and call “Properties” of the connection.
- Enter the following parameters.
- Click “Ok” everywhere to exit.
Connecting to the modem
Setting up Wi-Fi begins by connecting the modem and entering its configuration parameters on the laptop. For the first, use the instructions or the services of a wizard, and enter the interface where the modem is configured by entering 192.168.1.x in the address bar. Instead of “x”, enter 1 or 0 (depending on the device model).
A dialog box should appear asking you to enter information to enter the menu where WiFi is configured. Enter the standard value of both lines as “admin” and press “Enter”.
We activate the WiFi module: look for the line “Access Point” (it should be at the top) and move the checkpoint to the value “Activated” - active.
We go down to Broadcast SSID and activate the option by setting its value to “Yes”.
We enter absolutely any SSID value - this is the name of the future Wi-Fi network, under which it will be seen by users of all devices located within the coverage area of the access point.
It is recommended to select WPA2-PSK for the data encryption type (Pre-Shared Key field) of the wireless connection due to the fact that it has the most advanced security mechanism used everywhere today.
We must change the password to a strong one when setting up the adapter for the first time.
The setup on a laptop with an activated WiFi network module and on a computer connected to the router running Windows 7 is carried out in the same way.
Setting up the connection
Let's move on to setting up the wireless network on the laptop itself, setting the parameters for the modem adapter to operate in router mode.
- Having entered the modem interface, click on the “Interface Setup” button.
- Below, click “Wireless” - the parameter is responsible for turning on the Wi-Fi adapter.
- Go to the “Encapsulation” section and set the value of the only parameter as “PPPoA/PPPoE”.
- After changing the window view, enter the username and provided password.
- Activate the “Bridge Interface” parameter.
- The value of the “Default Route” function is set to “Yes”.
- Click “Save” to apply the new settings of the Wi-Fi adapter.
- Then we restart the modem so that the new parameters are activated.
After setting up a wireless network in Windows 7, you can safely disconnect the modem and use the access point on your laptop by selecting a new WiFi connection and entering the password that protects it.
If all instructions for configuring a wireless network are followed correctly, then the connection to the Internet will be established in a matter of seconds on a device with Windows, Android or another operating system, the main thing is to be close to the signal source.
(Visited 2,626 times, 1 visits today)
Hello friends! In this article I will give you the answer to the question - how to set up wifi on byfly? After all, using a router at home, you can access the Internet from several computers or devices that support wifi technology at once. Undoubtedly, this is very convenient and will save you from constantly getting in the way of Internet cables under your feet. In this article we will look at the ZTE modem and Promsvyaz M200A.
Setting up wifi on byfly begins by connecting the cable to your modem and computer. To do this, take the wire that came with the modem and connect one end to the computer’s network card, and the other to the LAN port on the modem. Just don’t confuse it with an ADSL port, it won’t fit there anyway.
Go to the modem interface
The basic setup of the byfly router begins with logging into the modem interface. To do this, open any Internet browser (Opera, GC, IE, MF, Safari) and in the address bar, located at the very top, enter the following - 192.168.1.1 and press Enter. You will be prompted to enter your username and password. Enter the Username admin and Password admin. And you find yourself in the modem interface.
Setting up the Internet
And finally, setting up wifi on byfly moved on to the main point - setting up an Internet connection. And so let’s get started, click the “Interface Setup” tab and immediately go to the “Internet” submenu. In the Encapsulation item, set the point to “PPPoA/PPPoE” and select “PPPoE LLC” below. Next, you need to enter your Internet connection information. In the “User Name” field, enter your name according to the contract. And in the “Password” field we also enter your Internet password. We put a dot in the “Bridge Interface” item on Activated. We check whether the point on the “Default Route” item is set to Yes. Click the “Save” button.
Setting up a local network
In principle, the local network settings can be left unchanged, or set as in the picture and enter the DNS of your city (the example shows for the city of Minsk). After changing the settings, do not forget to save by clicking on the “Save” button.
Setting up a wireless network
Setting up wifi on byfly moves on to the final point, namely setting up a wireless network. To do this, go to the Wireless tab. First, we activate wi-fi on the router (it may be disabled by default). In the “Access Point Settings” item, put a dot in the Activated option. In the “Pre-Shared Key” field, enter the password you created to enter the wi-fi network. We come up with and enter a network name in the “SSID” field (English layout is required. Click the “Save” button.
I hope that I was able to answer the question in more detail - how to set up wifi on byfly. I think that in this article I will help you become more experienced and raise your level of knowledge in the field of computer literacy and networking.
Almost every home now has several devices that require an Internet connection (computer, tablet, smartphone, laptop). For this, it is very convenient to use wireless connections (wifi), for example, from ByFly. So, let's look at how to set up ByFly on wifi.
First stage: connect the modem and configure it
First, you need to connect a modem to the device that will distribute the Internet. Then configure the network card on the computer itself. To do this, go to the Network and Control Center, then go to the Change adapter settings tab. We need a Wireless network connection and its properties.
We uncheck the box next to Protocol number 6, and check the box opposite number 4. The following window will open.
We register your IP address and DNS server (they are different in each region and city), as well as other parameters.
Second stage: set up wifi on the modem
Now you need to configure the modem itself. To do this, open your browser and enter the address of your modem in the address bar. After this, a window will appear.
Enter the word admin in two fields. Click OK and the following window will open.
Now let's set up the connection. Find the Interface Setup tab, click on the Internet button.
Now find Encapsulation and click on the PPPoA/PPPoE button. The following page will open.
Here you need the Username field, where you enter the contract [email protected]. Also enter your password.
Now, in the IP Address section, look at the Default Route button. It should be in the Yes position. Now look at the Dynamic Route line, select RIP2-M. Click the SAVE button.
Now in the same tab click on Wireless. Look at the PerSSID Switch parameter. It must be activated. Then write the name of your network in the SSID line.
Also pay attention to the Encryption and Authentication Type lines. They show the security of the connection. Also enter the password in the Pre-Shared Key line. We save everything.
Third stage: setting up wifi on a computer or laptop
Find “Control Panel” in “Start”, and in it “Network and Internet”. Go to “Network Center”, open “Change adapter settings”. Go to “Wireless Connection” and click the “Connect” button on the name of your network. Enter your password and click OK. Everything is ready.