Test mode in Windows 7. Turning Windows test mode on and off

Sometimes users are faced with the fact that an inscription appears at the bottom of the screen, which states that the system is running in test mode. At the same time, it also contains information about the edition and build number. Of course, users want to remove this inscription as quickly as possible.

Test mode usually indicates that the system digital signature verification disabled for drivers, the same error may appear in self-assemblies, in which one or another Windows function is blocked. Thus, we can say that in test mode some security features are disabled, which allows you to install unverified programs.

To enable it you can open command line(win+r and enter cmd) and write the statement bcdedit.exe -set TESTSIGNING ON/

Disabling via command line

To disable the mode you can also use command line, which should be launched on behalf of administrator. You can do this by right-clicking on Start and selecting the desired item. Then all that remains is to enter and execute the operator bcdedit.exe -set TESTSIGNING OFF.

In some cases, the command may not be executed. In this case, you will need to restart the computer; when you turn it on again, you will need to go into the BIOS or uefi, this can be done by pressing f2 or del at startup. Here you should find a function called secureboot and turn it off. After this, you can start the system again and apply the command; when everything is finished, the option can be enabled again.

After completing all the steps, the inscription should disappear. However, if the user has unsigned drivers, but others are not, the equipment for which they were installed may stop working. In this case it will be better do not disable the mode until official utilities appear, or you can use another method and simply hide the inscription without disabling the mode itself.

Using Universal Watermark Disabler

When using this method, the test mode itself, like all unsigned drivers, will continue to work on the computer, only the inscription notifying that it is enabled on the device will be eliminated. First, the user will need to download the utility to his computer; this can be done on the website https://winaero.com/download.php?view.1794. After this you will need to run it on behalf of administrator, the window shown below will appear.

Will remain click oninstall, after this a window will pop up in which the user will be asked if he is sure that he needs to run the program on an untested assembly; here he should agree.

After a while, a message will appear stating that you need to restart the computer; immediately after clicking OK, it will restart, so you should first save all your work.

The next time the system starts, the inscription will no longer be visible. However, you shouldn’t just keep the mode turned on; after all, programs without digital signatures may be dangerous and carry virus software. Also, when the mode is turned on, you can install unverified drivers for yourself, due to which the computer will lag and slow down, because they simply will not be suitable for the current equipment or will contain errors.

So, at the first opportunity, you should install the official software, which has all the necessary signatures, and then immediately disable the test mode and continue working in normal mode.

To disable test mode in Windows 7, open “Start” - “Run” (or press the Win + R key combination) and enter the following: bcdedit.exe -set TESTSIGNING OFF

To enable test mode in Windows 7, open “Start” - “Run” and enter the following: bcdedit.exe -set TESTSIGNING ON A little about what test mode is for. From the Microsoft website: "Microsoft has added a test mode to Windows so that users can test programs without an authentication certificate." That is, in test mode you can use programs whose drivers do not have digital signature Microsoft company. I hope that this article will be useful to you! ;-)

tahauov.blogspot.ru

Turning Windows test mode on and off

Found it on your computer and don’t know how to remove the “Test mode build...” message on Windows? Many users are facing this problem. There is nothing critical here, but the lines at the bottom of the screen can get in the way. Therefore, it’s worth knowing what it is, how to turn on or off test mode in Windows 7 or 10.

The functionality of Win 7 and Win 10 requires testing software without certificates.

What is this?

Test mode - special function, which allows you to test programs without a verification certificate. Not all software works with drivers that have electronic signature from Microsoft. For example, the utility has not yet been released official versions or it’s about to come out, but it needs to be checked. Any user may sooner or later encounter such a program, after which he will be prompted to enable “Test”. Its activation will be indicated by the inscription “Test mode windows 10 build 0000” in the lower right corner of the screen. Instructions on how to remove Windows 10 test mode are given below.

Activation

Activation of this option in Windows 10 and 7, as a rule, takes place without the user’s knowledge. Only then does he notice that strange inscriptions have appeared on the screen. However, there is a way to activate this option yourself, without the help of the applications for which it is intended.

1. Find the “Command Line” utility. It is usually easy to find through the Start menu - in search or in " Standard applications».
2. Run the line as administrator (right mouse button, select the appropriate option).
3. Enter the following: bcdedit.exe -set TESTSIGNING ON
4. Click "Enter".

After this, a corresponding message will appear, which unnerves many users.

Deactivation

Much larger number users are not concerned about how to activate Windows “Test” on a “Seven” or “Ten”, but how to remove it. Let's figure out how to disable test mode in Windows 10.

1. Launch Command Prompt as administrator.
2. Type: bcdedit.exe -set TESTSIGNING OFF
3. Press "Enter".

After entering the command, the annoying lines will disappear, and this means that you managed to disable the test mode. However, to remove the enabled mode, you must restart your PC.

Now you know how to run and disable “Test” in Windows 7 or 10. You should understand that disabling it may lead to required program won't work.

NastroyVse.ru

windows 7. Test mode: all the details

For many users in Windows 7, test mode is a familiar topic. However, few people will answer the question of why it is necessary to transfer the system to this mode.

It all started with Microsoft tightening the requirements for drivers that are installed on a device with Windows 7. Now all of them must be certified by Microsoft. This is confirmed by a special digital signature. The system checks each installed driver before installation begins. If you decide to install new drivers, and the message “windows can’t verify the publisher of this driver software” appears on the screen, then your driver is not certified. Even if you then try to continue the installation, and this option is present, the system still will not allow this. The same situation occurs when installing some programs and utilities. This is where test mode comes to the aid of users. When Windows 7 is running in it, you can safely install unsigned drivers on your device, be it a computer or a netbook.

What is a signed driver?

Drivers can be signed or unsigned. The only difference is the presence of a digital signature. This is an electronic security label that confirms that the driver you have is licensed and has not been modified in any way. The digital signature can also be used to determine the driver's publisher. If there is none, then installing an existing product can be risky, so in Windows 7 the test mode for installing such drivers should be used in exceptional cases.

To install or not to install?

If you cannot decide which case is exceptional and which is not, there is no need to worry: there are not many such controversial situations. Before hastily putting the system into test mode, find out more about the device for which you are installing drivers. Of course, unlicensed programs are unsafe, and drivers without a digital signature are much more harmful to your computer. It is worth the risk of installing unsigned drivers only on those devices that are already at least a little outdated. For example, not all old printers and scanners can now be found licensed drivers. But, nevertheless, we must somehow work with these devices. This situation will truly be considered exceptional, so, dear windows users 7, test mode will save you in this case.

Enabling

The transition to test mode when installing some programs and utilities will occur with your consent - during the installation process, a window may appear in which you need to give permission to transfer the system to the appropriate mode. But in most cases you will have to turn it on yourself. Doing this is almost as easy as disabling the Windows 7 test mode. So, go to the Start menu, select the Run line and enter the following code: bcdedit.exe -set TESTSIGNING ON.

Shutdown

After installing the drivers, you should remove the Windows 7 test mode. There are two methods for this, which differ slightly from each other. The first option resembles enabling this mode. Go to "Start", then to "Run". Enter the following: bcdedit.exe -set TESTSIGNING OFF. The second method is perhaps a little simpler. The above text must be entered after pressing the key combination "Win + R". Test mode is disabled.

In Windows 7, test mode is not the most everyday thing, but still a necessary thing, especially immediately after switching to windows system 7 with any other. The operating system changes, but the devices remain the same. So don't be afraid to use test mode in this case. But in other situations, you should still use licensed drivers.

If you were not the one setting up the PC, keep in mind that the system has special solution, which allows you to check the presence of a signature on the drivers.

fb.ru

Test mode windows 7 build 7601. How to remove it?

Hi all.

Today there will be a short article.

Recently this problem came up:

At the bottom right, the inscription “Test mode windows 7 build 7601” appeared.

This happens when test mode is turned on so that you can use unsigned drivers.

In fact, removing this inscription is quite easy.

You must open Command Prompt as an administrator.

Launch “Start - All Programs - Accessories - Run”, enter cmd.exe, press Enter.

On the command line itself we type the following:

bcdedit /set TESTSIGNING OFF

Reboot the computer.

That's all)

This is a simple life hack.

If this information found it useful, leave comments and share with friends.

Bye everyone...

Best regards, Sergey Krivtsov

Many PC users are faced with such a problem as test mode in Windows 10. Not everyone can disable this annoying message hanging on the screen. But this guide will help you in this difficult task. Here you will learn not only the main way to fix the problem, but also an additional one, more suitable for users who do not want to take risks.

Causes of the problem

Before you disable test mode in Windows 10 Pro (or any other edition of Ten), you need to understand the reasons for this malfunction. Most often this happens if:

• You have manually disabled the driver digital signature control system.
• When installing any program, you agreed to activation test mode.
• While the operating system was running, or during its next update, some kind of failure occurred.

In addition, the error often occurs when using pirated Windows. In unlicensed versions, there may be several reasons for enabling test mode, ranging from driver signature checking, which is disabled by default, to modified system files. In general, you never know what the pirates did there.

Consequences

Even if you don’t know how to disable test mode in Windows 10, there will be no serious consequences from doing so. The computer will continue to function normally. The only way the “test” operating system will differ from the regular one is the corresponding inscription at the bottom of the desktop.

But if you still decide to take such a step as disabling test mode in Windows 10, then you may encounter certain troubles. The fact is that some programs and devices use unsigned drivers to operate. They, in turn, will cease to function normally after test mode is deactivated, which may cause problems.

Basic method

You can use the command line to disable test mode in Windows 10. This method is recommended by Microsoft employees, so it is considered the main one. To use it, do the following:

• Login to the command line.
• Type "bcdedit.exe" then press the spacebar and add "-set TESTSIGNING OFF".
• Confirm the changes and wait for the operation to complete.

Restart your PC. If you did everything correctly, the system will stop working in test mode and, accordingly, the inscription will disappear from the desktop.

Using a special program

Since disabling Test Mode in Windows 10 can sometimes lead to negative consequences, you can play it safe and use alternative method. To do this, the UWD utility will be used, which is precisely used to remove all kinds of inscriptions from the desktop. To use the application:

• Install the program and run it.
• Click the “Install” button, confirm the changes you are making and wait until the operation is completed.
• The program will ask you to restart your PC. Do this and wait for your computer to turn on.

If you did everything correctly, the annoying inscription will disappear from your desktop. Please note that UWD does not disable test mode, but only hides the message about its use.

You are not a developer or do not test software products, drivers or other software elements, but you see the message: “Test mode” and the build number? This happens if you accidentally, when installing some program, selected permissions to switch to test mode, which you entered after restarting the computer. Let's look at how to disable test mode in Windows 7 and get rid of annoying inscription in the lower right corner of the desktop.

You may have switched to test mode after installing a small program called OpenedFilesView. When it is installed, the installer asks the question “Should I go into test mode?” and the user, considering this a useless action, agrees. When the system rebooted, the following appeared:

As it turned out, the problem, if you can call it that, can be solved quite easily. Everyone has already remembered that we used the “Run” utility many times in our articles - this case is no exception. So, go there using Win+R and enter the following command: bcdedit.exe -setTESTSIGNINGOFF.

After clicking “Ok” and rebooting, the system will exit test mode. But remember, if you ever need to turn it back on, you will need to follow the same steps, but use ON instead of OFF. Now you are convinced that disabling Windows 7 test mode is very simple.

Related Posts

Sometimes you leave the computer, and then come back, but it’s already turned off. Nervous screams begin, panic over lost information or important documents that were not saved. To prevent this from happening, you need to find out how to disable sleeping...

Users personal computer who have operating systems 7, 8, 8.1 or 10 may see this type of message on the monitor during operation: “The program is running in compatibility mode.” Many, especially inexperienced ones,...