• What is the AntiAON service from Megafon? Service from megaphone one-time antiaon

    Caller ID is a convenient service that allows you to remain anonymous when making calls. However, when it ceases to be relevant and useful, the operator's client asks how to disable Antiaon on MTS, what is needed for this and what is the cost of disabling. It is possible to carry out this procedure independently or with the help of representatives of the company quickly enough.

    Caller ID is a paid service connected by subscribers, as a rule, as a temporary measure. However, it can be used on an ongoing basis or “on request”, as suggested by the telecom operator. Separate payment upon connection is made for adding an option to the main list and a subscription fee is charged separately. AntiAon "on demand" is cheaper, but the fee will be charged at the time of the call to the requested number. Disconnection in both cases is free of charge.

    You can disable the AntiAon service on MTS in the following ways:

    1. In the “personal account” on the official website of the operator or in the application. To do this, you need to log in and go to the “Service Management” section. In the list of all services, you need to uncheck the box next to this option. After that, you should save the changes.
    2. By calling the contact center. To do this, you need to call the number 8 800 250 0890 MTS Russia and ask a company employee about this operation. As a result of processing the request, an SMS message with the result will be sent to the subscriber.
    3. By typing a combination of numbers. To cancel the connection of the Anti-Identifier on a permanent basis, you will need to select the command *111*47#, “on request” - *111*84# and press the call key. The response to the request will also be sent via SMS.
    4. By contacting the sales office of the company. This method is the most expensive, but effective. To apply, you will need to present your passport and the phone number on which you want to disconnect. Upon completion of the transaction, an SMS will be sent.

    The fastest and most convenient ways to disconnect can be considered using the “Personal Account”, calling the operator and dialing a combination of numbers. In all cases, the procedure is free of charge. Reconnection of the antidetector is possible at any time.

    Conclusion

    It is possible to connect and disconnect most of the options and services of the MTS operator without the help of company representatives. To do this, it is useful to know about the operator's hotline phone, the possibilities of digital commands and the "Personal Account". It is possible to connect or disconnect the caller ID with their help in a few minutes without the help of MTS office workers.

    Caller ID service on MTS is a completely standard tool, which is implemented by default for all clients of the operator. It has extremely simple conditions, as well as some modifications in the form of additional types of services, which we will consider today.

    MTS Caller ID service: detailed description

    The first thing to say about the Caller ID service is that it does not allow you to "declassify" incoming calls from unknown subscribers and hidden numbers, this is a proposal of a different nature.

    This option is responsible for the procedure for determining the caller's number, which is completely familiar today. If you have it connected, and you have it connected by default, all subscribers whom you call will see information about your number on the display of their phone.

    The service is offered for use free of charge and does not require additional connection, as it is included in the standard tariff plans for all starter packages of the company.

    How to connect AON to MTS

    There are four possible ways to do this, all of which are interchangeable:

    1. In your personal account on the official portal of the operator (instructions for registering a personal account).
    2. Through the official application for a mobile device.
    3. When entering a command *111*44# and further following the prompts of the system.
    4. When sending a message "2113"(without quotes) to number 111 .

    How to disable caller ID on MTS

    If you are not entirely satisfied with the possibility of determining your phone number by the subscribers you will call, you can disable this option by connecting to another service. We are talking about connecting the Anti Caller ID service, which is also available in the MTS line of offers.

    True, it should be understood that, unlike the standard caller ID tool, this service is not offered free of charge. When a hidden number is activated, the subscription fee for using the offer will be 3.95 rubles. in daily mode. And connecting the option will cost subscribers 17 or 34 rubles, depending on the tariff package used.

    It should be understood that your phone number will not be hidden immediately after you enter the appropriate request to activate the service. You will also need to enable the corresponding feature in your phone settings (available on all phones).

    How to disable AntiAON MTS

    You can disable the Anti Caller ID option when entering a combination *111*47# . If you do not want to deactivate the service, since you need to make 1 or several calls with the number displayed, you must enable the corresponding function in the settings, or dial the required subscriber in the format *31# phone number. The subscriber's number should start with "+7".

    "Anti caller ID on request" from MTS: details

    Another modification of this service is the "On request" option. This option will be ideal for subscribers who do not need to systematically hide the number, but, nevertheless, quite often use this opportunity.

    The essence of the proposal is as follows: by activating the service, subscribers will make calls under standard conditions, and other customers will see their number on their devices, however, if you enter the appropriate combination before directly dialing the subscriber's number, the number hiding service will be activated and operate exclusively for this one call.

    Accordingly, if you want to make a hidden call, you should dial the subscriber's numbers in the following form: *31#+7ХХХХХХХХХ. With the usual input of numbers, the interlocutor will see your number.

    How to enable or disable "Anti caller ID on demand"

    To use the "Anti Caller ID on demand" service, it must first be activated using a personal account or a request *111*84# . The option is disabled using the LC or an identical USSD request.

    The option is also not offered free of charge, and the following prices are provided for in its conditions:

    • Connection options: 32 rubles;
    • Fee for each day of use: 1.05 rubles;
    • Each one-time ban on number identification: 2 rubles for 1 call;
    • Shutdown procedure: free of charge.

    MTS "Super Caller ID" option: details

    The last type of caller ID service has the prefix "Super" in its name and plays a slightly different role, unlike the previous variations. This service is designed for subscribers who want to determine and see the numbers of absolutely all incoming calls, regardless of whether the owners of these phones hide or do not hide them.

    By activating this option, the numbers of incoming subscribers will be displayed in a standard way. The service is offered for a fee, and its activation will result in a round sum of 2 thousand rubles for subscribers. In addition, the conditions of the offer also provide for a subscription fee of 6.50 rubles. per day.

    How to connect or disconnect "Super Caller ID" from MTS

    • Personal account (link to personal account above on the test);
    • Smartphone applications;
    • USSD request

    All MTS clients who wish to remain unidentified can fulfill their whim using the AntiAON service. You can make calls to MTS customer numbers incognito, and your number will not be displayed to subscribers of other operators.

    In addition to the entertainment function (often the number is hidden for the purpose of a prank), the AntiAON service, under certain circumstances, can have a useful focus. When you are looking for a car, buying used things, you have to spend a lot of time on the phone.

    Using the anti-identification service, you can not leave your data with all potential sellers. The option will be useful for corporate clients who, on duty, must call a large number of clients.

    Do you want to hide the number on MTS?

    Would you like to clarify certain information by phone, but do not want to leave your number to the interlocutor? Connect the "AntiAON" option provided by your operator.

    You can install the "Anti-determinant" in different ways. Let's talk about the necessary manipulations that precede the use of the hidden number option.

    send ussd request

    To feel the benefits of connecting the AntiAON service, you should dial the sequence *111*46# . A successful request will be reported by an SMS containing information about the activation of the desired service. Sometimes the command fails for some reason. Redialing the proposed combination does not entail receiving a message with an affirmative meaning. Then a call to the number will help out 0890 . The operator will help you master the technique of calling in the role of incognito.

    The desire to return to the usual style of communication is easily fulfilled. The command will help to disable the "Anti-identifier" *111*47#. The operator will inform the client about the successful shutdown operation by SMS.

    How to hide the number on MTS in another way?

    If the option is needed for a short period, it is better to use the following sequence: *111*84# . You can use the features of the "Personal Account". It is worth finding the item responsible for managing the SIM card. If these prompts do not work, the correct solution is to call the operator (0890). Consultants are always ready to help in setting up the AntiAON service. Therefore, in a situation where other options are not effective, it is worth visiting the MTS office.

    Going to phone settings

    The owners of some mobile phone models are more fortunate: the phone settings make the manipulation of hiding the number simplified. Testing your phone for these settings is easy. Go to "Options", find the line "Settings". We move to the "Call Settings". It is here that there may be an option to allow hiding the phone.

    If the option is available on the phone, then you should see a checkmark on the line "Set by network". You need to select the "Hide phone" option and highlight it with an icon.

    Using the described technique, the user can attempt to set up the "Anti-detector" for free. To analyze the effectiveness of number hiding operations, you need to clarify the compatibility of phone settings and operator capabilities.

    The cost of the service of hiding the number of AntiAON MTS

    Before hiding the number on MTS, it is better to familiarize yourself with the rates. Customers who have a tariff without a subscription fee every month will pay 17 rubles for connection. 34 rubles will cost the connection of "AntiAON" to subscribers, from whom the subscription fee is debited monthly. Every day when the subscriber will be able to call from a hidden number, a fixed fee (3.95 rubles) will be debited from the phone account.

    It is clear that after a certain time, the client may get tired of constantly introducing himself at the beginning of the conversation and lose a few seconds. Sometimes the Anti-Determinant is no longer needed. Many begin to get angry with the daily reduction in the balance. In this case, you need to say goodbye to the "AntiAON" option. Shutdown does not require financial costs, it is easy and fast.

    Every mobile phone owner is used to the fact that during a call the contact name or number is displayed if the caller is not in the contact list. If, during a call, the phrases “Unknown caller” or “Number hidden” appear on the display instead of the usual characters, then the opponent wants to remain anonymous. There can be many reasons for this, but the special AntiAON service (Anti Caller ID) allows you to hide your phone number.

    Caller ID

    This service allows you to remain incognito when calling to mobile or landline phones.

    There are several options for AntiAON:

    • adjustable - opening or hiding the number on each outgoing call. Enabled by default when ordering a service;
    • permanent - your phone is hidden for everyone you call until the service is disabled.

    By the way, this service applies only to calls. If you send sms or mms, incognito mode will not work.

    How to hide a number on Megafon

    You can activate the Caller ID service on Megafon in several ways:

    1. Send an empty SMS message to 000105501 (you will receive a response message with information about the results of the operation).
    2. Dial the combination *105*501#.
    3. Go to the official website of the operator in the Personal Account and activate from there.

    Activation of the service costs 10 rubles, and the daily subscription fee is 5 rubles. The cost may vary depending on the region of the country in which the SIM card was purchased and registered.

    If you want to make your number visible to a particular subscriber (single call), dial the combination: *31# subscriber's phone number and call. After that, you can call as usual. This combination is “one-time”, so it must be dialed every time. If you want any subscriber to be able to constantly see your number when calling, save his contact in the book by assigning the above code.

    To disable the service, use one of two methods:

    1. Dial USSD code *105*501*0# and call.
    2. Disable through your personal account on the official website of the operator.

    How to hide a number on Tele2

    The anti-identifier on Tele2 is controlled by the following commands:

    1. Dial *117# and call to receive information about the anti-aircraft service.
    2. Activation by *117*1# command and call.
    3. Deactivate the service with the command *117*0# and call.

    To find out the cost of AntiAON, use the service certificate by dialing the combination specified in paragraph No. 1.

    When making calls outside the network to other operators (Megafon, Beeline, MTS), the stable operation of the option is not guaranteed. The only exceptions are calls within the network or to landline phone numbers.

    Important: AntiAON will not work if the subscriber has a service for determining intentionally hidden numbers.

    How to hide your number on MTS

    Caller ID on MTS allows you to prohibit or allow recognition of your own number during outgoing calls within your home network. When calling subscribers of competing operators, the full functioning of the service option is not guaranteed.

    To hide the number once, you should use the "Antiaon on request" option. It is allowed to activate only one of the services at the same time: either permanent or adjustable (upon request) MTS Anti-Identifier.

    You can enable the option in several ways:

    1. From the Personal Account using the Internet assistant on the official website of the operator.
    2. By dialing the system combination *111*46# and calling.

    To disable the MTS Anti-Identifier, dial the following key combination: *111*47# and call.

    The cost of connecting the service is 17 rubles. Excluding the monthly fee depending on the selected package (Your country, Super MTS, etc.). Daily rate - 3.95 rubles. Any changes in the cost of the service can be viewed on the official website or by phone by contacting the operator.

    How to hide your number on Beeline

    The anti-identifier on Beeline will help the subscriber remain unrecognized, even if his interlocutor has a number identification service installed.

    To activate the option, dial a combination of characters: *110*071# and call. Activation is also available by calling 067409071. If you want to disable anti-AON on Beeline, dial the following command: *110*070# and press the call button.

    In a situation where you do not want to hide your identity from the interlocutor, you should dial the following command: *31# subscriber's phone number and call.

    Important: The option will not work if the interlocutor has the "Super Identifier" service installed.

    AntiAON on Beeline is relevant only for voice calls (calls), does not apply to SMS or MMS, is guaranteed to work only when calling within the home network (to other Beeline subscribers) or to landline phones. Activation of the service is completely free, the daily subscription fee is 3.77 rubles, and on a postpaid system - 88 rubles / month.

    The caller ID option is becoming more popular day by day. It is needed not only for drawing acquaintances and secret calls, but also for quite reasonable reasons. For example, many companies or online stores record the numbers of calling customers, and then send them messages with advertising, promotions, and other spam. If you are tired of such phenomena, connect AntiAON today.

    It was no coincidence that Megafon included Antiaon in the list of its proposals. Since in the life of each of us there are moments when it is necessary to keep one's identity secret, the operator decided that one should not refuse such a whim to his clients. Details about this service, as well as the possibility of connecting it to your phone, can be found by reading the article to the end.

    What is "AntiAON" from Megafon?

    "AntiAON" is a service of the mobile operator Megafon, which allows the user to make incognito calls, that is, it is a classic anti-identifier on the phone.

    All mobile operators in Russia have in their arsenal basic services that are connected to all tariff packages and do not require activation. But at the request of the user, less popular functions can be activated on the phone.

    One of these is the AntiAON of the Megafon mobile operator, which is assigned to each network user, but requires additional activation.

    Description, types of service "AntiAON" and its cost

    The main function that the service performs on users' smartphones is to block the display of information about the caller on the interlocutor's screen - instead of a combination of numbers and the name of the caller, "Hidden number" or "Unknown caller" will be displayed.

    The prohibition of identifying a subscriber is very beneficial in that after making a call, the user can be sure that he will not receive unwanted feedback, since blocking the identifier will not show his information.

    IMPORTANT! This operator option applies only to calls on the home network - when calling from Megafon to other operators, AntiAON may not work correctly.

    The operator divided the service into two types, based on the needs of users:

    • Disposable service.
    • Standard service.

    The second type is connected by those users who plan to make covert calls all the time, and set up the service one-time - if the situation in which the ban is necessary is single, and in the future the subscriber's information can be available on subsequent calls.

    The cost of the service directly depends on the type chosen.:

    Connecting AntiAON to the client's phone does not affect the cost of outgoing calls - the standard billing is based on the mobile communication package registered for the user.

    IMPORTANT! The pricing information presented in the article is relevant in Moscow and its region. Detailed information regarding the service in other regions can be found on the official website of the company on the Internet.

    How to connect "AntiAON" and one-time "AntiAON" on Megafon?

    Unlike the basic determinant, the definition prohibition service is not included in the default tariff, but is included in the list of available for use. Therefore, in order to use it, you need to activate it.

    ATTENTION! Before activating, you need to make sure that the list of active services does not contain the option "Additional city number", since its active status will not make it possible to activate AntiAON for the subscriber in the device.

    As for many services in Megafon there are several options for activating AntiAON at the subscriber:

    1. Call to Megafon support service at 0500 asking for activation.
    2. It is even easier for the owners of the Personal Account to enable caller ID- just make changes in the "Options and Services" section. Here it is possible to perform any other actions with your tariff package if you do not want to spend precious time waiting for a connection with a hotline operator.
    3. By sending SMS arbitrary content or without it on 000105501.
    4. By executing the USSD command *105*501# with a call button at the end, the service will connect automatically.

    MegaFon corporate clients are connected to this service directly at the service office. Ordinary customers can also apply there, if none of the above methods suits them.

    If there is no need for constant masking and you need to hide the number only for one call, then it is better to set the service for 1 time. To do this, you must first disable the number transmission function in your device and execute the following USSD request: *31*user phone number to call#.

    After pressing the call button, the device will automatically start a connection with the subscriber specified in the request. After the end of the call, the settings must be returned to their original position, otherwise the barring fee will be charged for each call, which will lead to unnecessary spending on mobile communications.

    How to call from a hidden Megafon number?

    Calls with a hidden one-time AntiAON device service can be made only once using a single USSD command.

    But the connected service on an ongoing basis makes it possible to make calls from a hidden device to all phones registered in the Megafon system.

    If you need to open yourself to the interlocutor during any call, then you should temporarily remove the ban on the definition in this way: * 31 * number of the called subscriber #.

    After pressing the call button, the device will switch to the connection in the normal mode without blocking the identifier.

    Disabling AntiAON

    If you need to cancel your subscription to the caller ID barring service, you can deactivate the Caller ID service in several ways:

    1. Shut down with a simple custom command*105*501*0# and call.
    2. You can remove the definition prohibition lock by calling the support service on 0500.
    3. The phone will be identified during calls to other Megafon subscribers if you set the appropriate settings in your Personal Account.
    4. In any city in Russia, specialists from Megafon service centers will never refuse help in setting up mobile communications.

    The phone does not need to disable the one-time AntiAON, since this service is not connected to it, but is activated only at the time of a call to the desired number.

    Can the subscriber find out the hidden Megafon number?

    The service is available only for calls, and it does not apply to other functions (sending SMS and MMS messages) - in these cases, the subscriber's number will be determined, as always. The same applies to calls to users of other operators, but sometimes the function works.

    But not only when calling to foreign operators, it is possible to find out hidden information incognito. Megafon users can also bypass the ban on number identification by activating a special operator service -. With it, the subscriber will not be disturbed by any "spy".

    Final word

    Different people have very different tastes and wishes, so Megafon is ready to meet everyone. Exploring the demand of its users, Megafon is constantly expanding the range of services for them - this is how AntiAON appeared.

    Usually this service from Megafon is used to prank friends or very secretive persons who, in order to maintain their reputation, are ready to lay out an additional 150 rubles per month for mobile communications.

    It is also a very useful feature for corporate clients of the operator, when it is necessary to make a large number of calls for advertising and other purposes.

    Read more: