How to set an alarm on an electronic wall clock. Talking clocks for the blind - instructions for using technical means of rehabilitation

I've been looking for an alarm clock for my room for a long time. I wanted something light or wooden, or both. I wanted backlighting so that I could calm down in the middle of the night, knowing how much sleep was left. Months of choice brought me to this watch.

Price almost at the time of purchase 180 rubles with discount (currently about 230)

Delivery time 1.5-2 months, everything came well packaged: a bubble bag and a box.

Why did I choose them?

Affordable price
Backlight
Alarm
Timer
Thermometer (both Celsius and Fahrenheit)
Possibility to choose alarm melody

Socket for 3 AAA batteries- little finger ones, easy to find, but work from 2(thrifty Chinese)

The watch is quite small, the size 12*6 cm.

There were also instructions in the box, but they were quite unclear. I have a decent level of English, but I’m not good with technology, so I spent several days figuring out the settings. To make your life easier, I want to briefly tell you how to set the date/time/temperature scale, etc.

So, let's set the time!

Click Mode , is displayed on the top of the display 24Hr . Click Up/Down - we see 12Hr. So we select a 12-hour or 24-hour time mode (by switching the buttons Up/Down )
After selecting the mode, press the button Set and set the time. I chose the 24-hour mode. The hour digits start flashing first. Again with buttons Up/Down We set the hour we need.
After setting the clock, press again Set and we are already setting the minutes.

Setting the date.
1. Immediately after setting the minutes, press Set and lights up year. Originally this is 2009. It also blinks, so the buttons Up/Down set the desired year.
2. Click Set , the second part of the display is already blinking. Install first month.
3. Click Set and choose what we need number. All digit switches are controlled by buttons Up/Down .
4. When you have set today's date, on the third part of the board you can see day of the week. If this is indeed that day, then congratulations, you did everything right.
  
  Setting an alarm.
  It's not that simple. Even if you didn't set the alarm yourself, you'll still have to get up to turn it off. The fact is that it is automatically installed on 0:00 , so it will ring at midnight.
  P.S. If you are not going to use the alarm on this watch, then when the format appears in the menu ALARM -:-- do not press under any circumstances Set.
  So, let's proceed directly to the installation.

Slap watch "Pulse"

Battery

Water protection

Caring for your watch

Modes:

1. Clock (hour, minutes, seconds) and date
2. Stopwatch
3. Alarm clock

Button "B" switches between editable parameters. The numbers are changed using the "C" and "D" buttons. Go back to the current mode - button "B".

Setting the time and date:

In time display mode, press the “B” button 3 times, then use the “C” and “D” buttons to set the current time and date. Return to normal mode from the setup mode - press the "B" button.

Select between 12/24 hour time display - button "D"

Stopwatch:

In normal time display mode, press button "B" 2 times, start the stopwatch with button "D", stop the stopwatch with button "D". Reset the stopwatch: after it stops, press the "C" button.

Alarm :

In the time display mode, press the “B” button once, then use the “C” and “D” buttons to set the hours and minutes. When correct installation alarm, the alarm symbol will appear on the watch face. To turn off the alarm, press the "B" button once, then press the "D" button. The alarm symbol should disappear from the watch dial.

To return to normal mode from the setup mode, press the "B" button.

Backlight:

Button "A" turns on the backlight of the clock dial. The backlight is active when the "A" button is pressed and held. If you do not press any button within three seconds, the clock backlight will automatically go out.

Watch "Fast sport"

Watch "Electronic sports"

In the "Clock" mode you can edit:
- seconds
- watch
- minutes
- year (in the current mode this parameter is displayed as the day of the week)
- month
- date
The transition between 12 and 24-hour time systems is carried out with the LIGHT/RES button.

In the "Alarm clock" mode the following can be edited:
- watch
- minutes
- month
- date

In the "Additional hours" mode the following can be edited:
- watch
- minutes
In this mode, an additional time is configured, above which the main time will always be displayed.
In the "Timer" mode you can edit:
- seconds
- minutes
- seconds
The transition between the "AUTO" and "MANUAL" modes is carried out with the LIGHT/RES button.
In Stopwatch mode:
Start and stop - ST-STOP button, reset - LIGHT/RES button.
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out.

Watch "Future"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. Between your wrist and the strap should go through your finger.
To clean the strap, use a dry, soft cloth, or a soft cloth dampened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzine, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.). The chemical reactions caused by these materials cause damage to the gaskets, case and polish of the watch display.

Turning on the clock
The watch is turned on by pressing either of the two buttons once. Button "A" turns on the animated backlight of the clock, button "B" turns on the usual static backlight. By pressing the "A" button, the "Current mode" switches between modes in the following sequence:
- time (hours and minutes) - P
- date (month and day) - D
- day of the week - W
Setting the clock
The display is configured by successively pressing the “B” button and then the “A” button.
There are two ways to switch to editing mode:
Option 1. Press the top, then the bottom button.
Option 2. Press the bottom button twice.
The parameter being edited will begin to blink and you need to use the “A” button to set the desired position of the numbers. Next, use the “B” button to select the appropriate parameter and continue editing with the “A” button.
:
1. Hours (1-12)
2. Minutes (05-60 in 5 minute increments, four square dots in the center of the clock display will be used to set 6, 7, 8, 9 minutes)
3. Month D (1-12)
4. Day D (1-31)
5. Day of the week W (1-7)
6. Display backlight brightness (4 levels): adjustable by selecting the number of square dots
7. Display backlight time 60 (05-60 seconds)
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out. The screen turns off automatically after a specified time interval (05-60 seconds in 5 second increments).

Watch "Leg"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. Between your wrist and the strap should go through your finger.
To clean the strap, use a dry, soft cloth, or a soft cloth dampened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzine, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.). The chemical reactions caused by these materials cause damage to the gaskets, case and polish of the watch display.
The clock is turned on by lightly touching the display:
1 time - time (hours, minutes)
2 times - date (month, day)
3 times - seconds
Setting the clock
1. Lightly touch the display to enter the “Current time” mode.
2. Touch and hold your finger in the center of the display - the parameter being edited will begin to blink. Now you need to change the numbers with light touches. Next, use repeated long touches of the display to switch from mode to mode and continue editing with light, short touches.
The clock display is configured in the following sequence:
1. Hours (1-12, A-am or P-pm)
2. Minutes (00-60)
3. Y (00-100)
4. Month D (1-12)
5. Day D (1-31)
(do not touch the display), the clock automatically returns to the “Current Time” mode and the blinking stops.
If you do not press any button within five seconds When a value is flashing, the clock backlight automatically goes out.

Watch "Original"

Watch "Touch"

Battery
The battery in the watch you purchase is factory installed and should be replaced at the first sign of power failure.
Water protection
The watch is not protected from water. Avoid exposure to any moisture.
Caring for your watch
Never attempt to open the case or remove the back cover.
The rubber gasket that protects the watch from water and dust should be replaced every 2-3 years.
If moisture gets inside your watch, have it checked immediately by your nearest workshop.
Do not expose your watch to extreme temperatures.
Although the watch is designed to withstand normal use, you should avoid rough handling or dropping it.
Do not fasten the strap too tightly. Between your wrist and the strap should go through your finger.
To clean the strap, use a dry, soft cloth, or a soft cloth moistened with a mild, neutral detergent and water solution. Never use products that evaporate easily (eg benzine, solvents, spray cleaners, etc.).
When you are not using your watch, store it in a dry place.
Avoid contact of the watch with gasoline, cleaning solvents, spray aerosols, adhesives, paint, etc.).
Turning on the clock
The watch turns on by lightly touching the display once. By touching again, the “Current mode” switches between time (hours, minutes), date (month, day), seconds.
- time (hours/minutes)
- date (month/year)
- seconds
Setting the clock
1. Lightly touch the display to enter the “Current Time” mode.
2. Touch the right side of the display near “SET” to enter “Edit Mode”. The parameter being edited will start blinking. Now, lightly touch the left side of the display near “MODE” to change the numbers.
3. Next, by repeatedly touching the right side of the display near “SET,” you can switch from mode to mode. Editing continues with light touches or a continuous touch on the left side of the display near "MODE".
The clock display is configured in the following sequence:
1. Clock (1-12/1-24)
2. Minutes (00-60)
3. Month (1-12)
4. Day (1-31)
5. Year (2001-2099)
6. 12 or 24 hour time display system
If you make no changes in edit mode(do not touch the display), the clock automatically turns off.
If you do not touch your watch within three seconds, they automatically go out.

Clock "Data"

Modes:

1. Clock (hour, minutes and seconds)
2. Stopwatch
3. Alarm clock
4. Date

The MODE button switches between edited parameters. The numbers are changed using the ST/SP and RESET buttons. Go back to the current mode - MODE button.

Setting the time and date:

In time display mode, press the "MODE" button 3 times, then use the "RESET" and "ST/SP" buttons to set the hours and minutes. By pressing the "RESET" button again, you enter the mode for setting the current date and day of the week. You can view the date in the current mode by pressing the "ST/SP" button.

Can't learn to wake up with an alarm? No problem, you just need the “right” alarm clock that will wake up even the most inveterate sleeper by all means! Now, in order to turn off the signal of your alarm clock, you won’t just have to reach out to the treasured button, but you will first need to catch this nimble and annoying “wake-up caller”. Clocky's running alarm clock will not let you sleep through any important event in your life!

Nutrition

The alarm clock requires four AAA batteries to operate. It is enough to insert them into a special compartment as shown in the figure below, close the compartment with a screwdriver, and your alarm clock is ready for use.

Setting the time

To enter the time setting mode, simply press the “t” key on the control panel. Consecutively pressing the “h” and “m” buttons will allow you to set the desired number of hours and minutes.

Setting an alarm

Enter the alarm setting mode by pressing the “a” key on the control panel. Pressing the “h” and “m” buttons in succession will allow you to set the desired number of hours and minutes for your alarm.

Setting the time range for repeating signals

To enter this mode, you must press the “a” button twice, after which you can, by repeatedly pressing the “m” button, set the signal repeat time range from 0 to 9 minutes.

Setting the alarm time

To enter the mode for setting the alarm time, you must press the “t” button on the control panel twice, after which the number 1 will be displayed on the clock display - initial setup. Press the h button repeatedly to select a value from 1 to 5, then press the t button to confirm the value.

When you select the value “1”, the alarm will continue to move for 20 seconds
When you select the value “2”, the alarm will continue to move for 40 seconds
When you select the value “3”, the alarm will continue to move for 60 seconds
When you select the value “4”, the alarm will continue to move for 80 seconds
When you select the value “5”, the alarm will continue to move for 100 seconds

If, when you first sound, your alarm clock only plays sound, but does not move, do not worry. A minute after pressing the “end call” button located on the cover of the device, it will begin to drive and at the same time give a signal, finally waking up the person who turned it off.

Demo mode

Press the "t" key twice until a number from 1 to 5 appears (alarm wheel rotation mode), select any value from 1 to 5 using the "h" button, then press the "t" button twice. The alarm clock will start sounding immediately. To turn off the demo mode, press the button with the image of a wheel on the front panel of the alarm clock.

Don't let yourself oversleep a single significant event or meeting in your life! Order Clocky's running alarm clock right now!

The overwhelming majority of modern watch models are produced abroad. To get a quality product, people order devices from the most famous companies. Electronic wrist watch have huge functionality, but rarely all this functionality is localized, which leads to configuration difficulties. Language barrier leads to a dead end, since not every user has the knowledge English language. How to set up an electronic clock yourself? It's not as complicated as you might think. Now you will see this.

Settings

Most often, models are equipped with MOD and SET keys. To set the time on such a watch, you need to do the following:

Hold down the MOD key for a while. The edit field should start flashing. If several interface fields start blinking at once, press the same key once to switch to the desired field.
Use the SET button to set required parameters. To change the values, you need to press this button repeatedly.
Use the MOD key again and switch to other fields. Again use another button to change parameter values.
If the desired values have been set, then complete the entire procedure with the last click on MOD.

Everything seems simple, but how to set up an electronic watch with 4 buttons? This procedure looks even simpler.

Important! When you've figured out the settings, it's time to think about your harmonious look with a new accessory. Find out all about:

Four buttons on a gadget

If your gadget is equipped with four buttons, then the entire setup process will look even simpler:

You need to also click on the MOD button. When you make the numbers on the device screen blink, press SET once, and then scroll through one of the other two buttons.
The first key is responsible for increasing the value, and the second is responsible for decreasing it.
If you have set the parameters, press the MOD key again.

There are accessories that have even more keys. What should the user do in this case?

Setting up devices with even more controls

But in this case, there is no objective instruction. It is best to follow the recommendations described in the accompanying documentation. Often additional keys are responsible for calling an electronic thermometer, calendar, timer or stopwatch.

Important! Such keys simply visualize parameters, but do not configure them in any way.

If you still don’t want to use the standard documentation, you can try making a few presses on the MOD key, scrolling through all the functions. When you find the desired option, place your finger on the SET key and set the data. Typically, almost all electronic devices are configured in this way.

Important! Bookmark useful articles for the future, the information from which will definitely be useful to you in the future:

Now you understand how to set the time electronic watch, but how to set an alarm on them?

Set the alarm clock

Absolutely all models electronic devices equipped with an alarm function. In order to start it, you need to press “MOD” again until you find the inscription “alarm” on the display.

Important! The alarm time is set in the same way as setting the time and date, which was described above. The “SET” control element in this field is responsible for turning this function on and off.

In fact, different devices are configured differently, so the most the right way parameterization means entering the model name into any popular search engine. On the Internet you can easily find any localized instructions for setting the time.

You can also use the services of the store where the device was purchased. Just bring the device to a consultant and ask for help.

Important! Setting the time in stores is completely free, you can ask the seller absolutely any questions about your equipment.

Video material

Now get started, because they are extremely simple and in a matter of minutes you can set required settings on your accessory.

It’s rare that electronics and equipment are sent to Russia from China with a memo or passport in Russian. If you find yourself in such a situation, then most likely you ordered a wall or table clock on Aliexpress or became the owner chinese watches from the store.

In the Aliexpress online hypermarket, there are more than half a million options for the “electronic watches” item – of all sizes, colors and shapes. There are wall and table clocks with buttons, and even floor-standing solutions with thermometers. There are plenty to choose from! But how to set it up?

Most often, the buyer has to independently guess the purpose of the buttons and, using ingenuity and intuition, configure the device.

Fortunately, the experience of numerous users of Chinese products allows us to determine a certain algorithm for trouble-free setting of any electronic clock - wall, table and even floor!

What are the buttons on a wall or table clock responsible for?

To set up Chinese electronics, you will need to understand what the buttons on the watch mean.

It's very simple.

Workers and important buttons in electronic watches from Aliexpress usually no more than 4. All other buttons are either fake or are responsible for demonstrating a specific function.

To configure, you will need to know the markings:

MODE/MOD – selection. Responsible for switching between categories and parameters. Typically these are the functions “time”, “alarm clock”, “stopwatch”, “date”.
START/SET – input. The area of responsibility includes setting the digital indicator of the selected parameter, that is, directly programming the date or time.
In addition to MODE and SET, there is certainly a RESET key on the device body - to reset the entered data or reboot the product.

Location of the RESET button in products from Aliexpress: in table and wall clocks - usually hidden in the battery compartment or recessed into back panel products.

All other elements of Chinese watch electronics serve to enable or demonstrate individual functions, but are almost never responsible for setting them up:

LIGHT – turn on the backlight;
12/24 – switching between 12-hour time format and 24-hour time format;
MIN/MAX – in products with demonstration of temperature and humidity, it is used to display the minimum and maximum data values for a certain period of time;
C/F – switching temperature indicators in Celsius or Fahrenheit;
ON SC OFF – switching on voice mode For quick activation backlighting the screen when it goes into a “sleeping” state;
SNZ – delayed alarm start;
ALARM – setting the alarm time;
UP – blocking the “sleep” mode when the device is operating;

Buttons on the back or top panel without designation – turns off the alarm when it goes off.

Sometimes manufacturers ignore any labeling options. Then one can navigate “by touch.” Two controls are exactly MOD and SET - “select” and “enter”, one is “select” and “set” at the same time.

In the case of single control, don’t be scared, because everything is simple:

Hold, press the key – “select”.
Short presses – “setting parameters”.

VIDEO INSTRUCTIONS

Setting the date, time and alarm of the electronic wall clock

The standard version of the push-button configuration is SET, MODE, RESET. And it is this that causes the greatest difficulties for users.

In fact, setting up a 3-button digital watch is quite simple.

In them:

MODE – choice.
SET/START – input of digital data.
RESET – reboot and “help” when setting basic parameters.

The sequence of actions is as follows:

At help MODE parameter is selected. Each function has a certain number of clicks.

For example: one press – time, two presses – date, three presses – alarm clock.

In the absence of instructions, the sequence is determined experimentally; fortunately, there is only one electronic format time and dates and understand which function appeared on the screen is quite simple.

Setting, that is, switching between numerical indicators by flipping, is carried out either using SET, or using SET and RESET. In the second case SET is responsible for hours and months, RESET – in minutes and days. Although there may be other options, since Chinese products are sometimes unpredictable.
The time on the alarm clock is set in the same way: MODE – selection, other buttons – settings.

The moment of turning off the alarm clock is interesting - this often requires simultaneous pressing of two auxiliary buttons at once.

The peculiarity of Chinese watches is unpredictability. Buttons on devices have different names and are responsible for different functions or are completely fake. But all this is not scary!

The operating principle of all models is similar and, having understood the basics of setup, you can quickly set the necessary parameters.