How to make a TV from a computer monitor. The new computer monitor worked like a TV

The article describes how to use a TV instead of a monitor, what are the pros and cons.

Navigation

For a clear example, we will try to disassemble the TV and monitor according to their main parameters:

• How to connect to a computer?
• What is the convenience of using them?
• What screen types do these devices have?
• What are the parameters of their visible area?

IN this review we will talk about what are the positive and negative sides of using a TV instead of a monitor for computers. So, let's start the analysis.

Which is better: a monitor or a TV for a computer?

Let's start with the question, what is the convenience of using a monitor and TV for a computer? Ease of use is perhaps the most important factor that will give us a clearer understanding of which of these devices will be more useful to us.

It is worth noting right away that modern monitors for computers it is really more convenient to use on a computer than TVs. There are the following reasons for this:

• TVs, as a rule, do not have a special adjustment for adjusting the angle of the screen relative to the table, which cannot be said about monitors. After all, the monitor is intended for this, so that we can place it in front of us on the table, tilting and fixing it as convenient as possible for the eyes. TVs are designed to stand with the screen perpendicular to the floor, they can even be hung on the wall.
• Televisions are usually more monitors in size, so it will not be convenient to put them directly in front of you at a close distance from your eyes. Moreover, it will be even more harmful. The screen should be located on average 50 cm from us, which gives maximum comfort. TVs, whose diagonal exceeds 68 cm, will cause some discomfort, since we will not be able to cover the entire screen with a glance.

The best option, with regard to the diagonal of the screen, can be considered a diagonal of 66-68 cm and a screen resolution of 1920 × 1080-2560 × 1440 px. That is, in this case monitors for computers will outperform TVs.

Now let's move on to the question of the type of screen. As you know, in our time two main types of TV screens are produced for the mass consumer:

• liquid crystal

TV instead of a monitor pros and cons. How to use your TV as a computer monitor How to connect a monitor and TV to your computer at the same time

• Plasma

TV instead of a monitor pros and cons. How to use your TV as a computer monitor How to connect a monitor and TV to your computer at the same time

There is an opinion that plasma screens may be abandoned in the future, since they are inferior to liquid crystals in a number of parameters. And if we consider plasma tv as an analogue of a monitor for a computer, then there are no special advantages at all. The fact is that the plasma screen has a lower resolution than LCD TVs and monitors.

Screens by CRT technologies we will not consider, as they are outdated. Laser screens are too expensive for ordinary user. A plasma screens we weeded out. So, let's focus on LCD monitors and LCD TVs. We will consider their disadvantages and advantages in use for computers.

Let's go further. We have already discussed the size of the diagonal above. If you want to use a TV (especially a large one) instead of a computer monitor, then this will not be desirable when you are working on a computer at your desk.

But if you use the computer itself as a home theater system (download movies to good quality and view through an expensive video card), connect to it good speakers(through quality sound card), then surely big TV here is a significant advantage over computer monitor. In this case, we do not see any other meaning of using the TV.

TV instead of a monitor pros and cons. How to use your TV as a computer monitor How to connect a monitor and TV to your computer at the same time

But LCD TVs, equal in diagonal to LCD monitors, will be inferior to the latter in terms of such parameters as matrix quality and screen resolution. Therefore, with equal dimensions, it is best to choose a monitor for a computer. Even a cheap monitor will better than TV similar dimensions as a device for a computer.

Using a TV instead of a monitor for computers: advantages and disadvantages?

So, consider the advantages and disadvantages of using a TV as a monitor for a computer.

Advantages:

• A large TV connected to a computer makes it possible to comfortably view high-quality photos, movies and other similar content.
• You can connect an antenna or receiver to the TV and watch TV channels by switching to this mode. When you want to watch a particular movie, you can switch to computer mode. The TV remote will help you switch between modes comfortably.

Flaws:

• You will not be able to use the TV as a full desktop monitor for your computer. As a rule, TVs are larger than monitors in size, so you will either have to put the TV further away from you, or get used to turning your head in order to capture the entire screen.
• If your TV and monitor have the same resolution, but different diagonals, the pixel size of the TV will be significantly larger than that of the monitor. This will affect the quality. When viewing the screen from a normal distance, when you are sitting at a computer, the image will be so poor quality that you will notice the dots from which it is built. If you pick up a TV with a pixel size similar to that of the monitor, then you will need an expensive video card that could "pull" such a TV.

TV instead of a monitor pros and cons. How to use your TV as a computer monitor How to connect a monitor and TV to your computer at the same time

• When using a TV, there will be a delay in the signal from the computer (keyboard and mouse) to the TV. You will immediately feel discomfort. When you work on a computer and move the mouse, the cursor on the screen moves in step with it. On the TV screen, the cursor will move with a delay, and you are unlikely to like this in the long run, especially if you are a fan of playing computer games.
• The TV has too high contrast and brightness of the screen. Monitors in this regard are specially designed for a computer.

How to connect a TV to a computer instead of a monitor?

If you still decide to use a TV for a computer instead of a monitor, then let's get acquainted with how to connect a TV to a PC. It's actually very simple.

Modern computers and video cards are equipped with modern connectors " HDMI", as well as the old " VGA". It is through one of these connectors that you will connect the TV to the computer. It should be noted that the use of HDMI” is much more important, because the image quality will be much better than that of the “ VGA". Therefore, try to use a modern TV and video card.

TV instead of a monitor pros and cons. How to use your TV as a computer monitor How to connect a monitor and TV to your computer at the same time

This way you can use the TV as a monitor. But if, after reading the description above, you understand that the monitor and TV should be used for each purpose, then we can offer an excellent solution.

You can connect a TV and a monitor to your computer at the same time. And this is also easy if you use a modern video card. The fact is that modern video cards can connect two or more monitors / TVs at the same time, and they have the appropriate number of connectors.

After connecting, you can use the TV as a TV from the computer, the monitor as a monitor. It is only necessary to properly arrange all your devices in the room.

Can the TV be used as a monitor for a computer via "Wi-Fi"?

TV instead of a monitor pros and cons. How to use your TV as a computer monitor How to connect a monitor and TV to your computer at the same time

It is worth mentioning one more possibility. If you are using " WiFi”, then you can connect the TV to the computer through it. In this case, we recommend that you use TVs with " Smart TV". Thanks to these TVs, you can watch Internet channels on " YouTube» via connected « WiFi”, as well as view photos and movies that are stored on your computer.

For this you need " WiFi» with the ability to connect at least two devices. One of them will be a computer, the other will be a TV. Next, you just need to install on your computer special program"Home media server". Download and install it on your computer. You can find out how to use it on the official website.

TV instead of a monitor pros and cons. How to use your TV as a computer monitor How to connect a monitor and TV to your computer at the same time

Video: How and how to connect a TV to a computer?

Video: Which is better for gaming: monitor or TV?

It is almost impossible to find televisions with a kinescope in our apartments. The electro-ray tube has been replaced by plasmas and liquid-crystal screens. These TVs are built using digital technology. The transition from an analog signal to a digital signal has greatly simplified the process of connecting and combining various kinds of devices with each other.

Connecting a TV to a computer allows you to refuse common antenna. On big screen you can watch any videos, clips and photos. And the power modern computer allow you to transmit a signal to both the TV and the main display.

TV can be used as a multimedia center

There are several ways to connect a TV to a computer as a monitor. You can do without wires, and the process itself is not difficult. You can easily turn your TV into a modern multimedia center.

How to connect a TV to a computer?

The connection method depends on the availability of certain connectors on the TV and computer. There are three connection options:

1. With cable. The TV receiver can support the following interfaces: HDMI, DisplayPort, DVI or VGA. The first two are digital, the third is integrated, two types of signal can be transmitted through it. VGA is a pure analog interface.
2. Connection via wireless technology WiFi. In this case, a router is needed, and the TV must be equipped with WiFi module. Not all TV receivers have it, but the module can be purchased separately from the store.

WiFi module for wireless connection

1. Connect computer and TV using Ethernet cable. RJ-45 connector is used for connection. The cable is also called twisted pair.

A router is a special network minicomputer that allows you to combine different architectures local networks. Its task is to distribute information packets according to certain rules between different recipients: laptops, tablets and other devices connected to the network.

The operating system on the computer allows you to connect without much difficulty. She will offer best option. Connecting via WiFi in most cases takes place automatically. It is only necessary to approve the proposed method.

HDMI and DisplayPort

These two interfaces are currently competitors. They transmit sound and image digitally. To connect to a PC, a connecting cable is selected based on the connectors that are present on the computer video card and TV. It doesn't matter if the output of the computer is a DisplayPort connector, and the TV has HDMI. The electronics store has cables with the necessary adapters.

Cable connection methods

DVI and VGA

VGA interface uses analog signal. If you are planning to use VGA connector, then you need to stock up on a cable that has a DVI-VGA adapter. In this case, the signal is converted to analog. Doing a reverse conversion does not make sense, there will be big loss of quality.

Connectors for cable connection

Digital interfaces are combined without problems. On the counter of a specialized store you can find adapters of all types.

Wireless connection

You will need a router to connect via WiFi. To it, in addition to the TV, it is possible to connect a large number of devices: tablet, smartphone, laptop. The main advantage is the absence of a bundle of wires stretched around the apartment. Only one wire is needed, which provides access to the Internet.

Create a network using a router (router)

To distribute access to the network, the router is pre-configured. As a rule, the provider provides detailed instructions to set up or you can invite a representative of the company. A specialist will help you connect and set everything up. If everything is done correctly, the computer will automatically detect the network and automatically connect to it. The TV must be connected manually, through the setup menu.

LAN connection

The third connection method is very similar to the previous one, with the difference that they use twisted pair. The TV receiver is connected directly to the PC or through a router. This connection has a number of advantages:

• connection stability;
• high speed of information transfer;
• protection from external interference.

The only drawback is the need to run a cable from the router or computer to the TV.

How to connect a TV as a monitor?

The input signal from TV is taken from the video card. For connection, a cable with appropriate connectors is used. The television receiver can serve as the main or additional display. In the second case, either duplication of the image or extension of the desktop is possible. You can display a video player with a movie in this area, and use the main screen for work.

The display mode on two monitors is set through the settings in operating system. In Windows 8, you can call up the menu through the key combination Win + P.

If there is no image on the TV, then the screen resolution is most likely set incorrectly. Select the desired number of points for the device in the settings. If there is no sound, then through the settings panel, select desired device for audio.

Summing up a little

The article discusses three ways to connect a TV to a computer. It can be used as an additional display or turned into a real multimedia center.

Buying new tv Pay attention to the connectors present. The VGA interface is a thing of the past. In 2015, it is planned to abandon it altogether. So if it is not on TV, then you should not worry too much about it. But the presence of several HDMIs is a big plus. Through them, you can connect to TV and other devices. Share files between different devices it will be much easier.

Create a complete multimedia center in your home. Use digital technologies to the fullest, and your stay at home will become an order of magnitude more comfortable.

Video

TV tuners are separate small-sized devices for receiving television signal. They have been around for a long time. But with the advent of digital television broadcasting, TV tuners have become especially popular. This small and inexpensive box will allow you to turn an outdated analog TV into a digital one and receive 20 channels with perfect quality even in areas of uncertain reception, where previously it was possible to “catch” only how much analog channels with noise and ripples.

In fact, a TV tuner is a full-fledged TV, only without a screen and speakers. To view programs, it requires only a screen and a part of the electronic filling that is directly responsible for displaying the image, therefore, in principle, a computer monitor can also be used with a tuner.

So is it possible to use a computer monitor as a TV: let's try to figure it out.

How can I use a computer monitor as a TV?

TV tuners are of two types - computer (in the form of a board installed in a computer case, or connected to computer usb devices) and external.

The built-in computer TV tuner is not a relevant thing, since now many TV channels broadcast over the Internet, and you will have to watch programs under the noise of computer fans, and even lay antenna cable to the system unit - in general, not an option.

But hanging a small box on the back wall of an outdated, but still fully functional monitor, and sending it to work in the kitchen, in the country or in the garage (if, of course, you have one) is quite real, and will save a lot of money.

So, in order to turn the monitor into a TV, you first need a TV tuner.

Converting a monitor into a TV with your own hands: what you need to know?

When choosing a TV tuner for a computer monitor, you need to decide on the type of video signal connection (to avoid unnecessary adapters) and how to play sound.

About sound:

There have been monitors on the market with built-in speakers, but this is rather an exception to the rule, so you need to provide speakers, which you can free up, for example, as a result of an upgrade of "computer sound" (following the monitor).

Perhaps an old woman with an external input is already waiting in the garden - also an option, and often of better sound quality than tiny computer speakers.

And finally, our enterprising Chinese friends have launched the production of tuners with a built-in speaker.

The sound will not be of very high quality, but the all-in-one solution is compact and does not require an abundance of wires: an acoustic cable to the speakers, a speaker power adapter, a connecting wire between the speakers.

In a word, if you are not a fan of Muz-TV, and if you are opposed to the kitchen resembling a radio unit in terms of the number of wires, take a device with a speaker.

About video signal:

Modern and high-quality interface for .

TV tuners with such an interface are on sale and are minimal in price, however HDMI interface appeared relatively recently.

And most likely, an old monitor of the previous generation with a VGA video input will go to the dacha as a TV.

You can, of course, purchase an HDMI-VGA adapter. But the circuit with the adapter has its own " underwater rocks". The HDMI standard is evolving, has many specifications, and it's not certain that an inexpensive adapter can handle the conversion of a digital signal to analog. And the cost of a high-quality HDMI-VGA converter can exceed the cost of the tuner itself by more than two times.

Therefore, it is wiser to purchase a TV tuner specially designed for connecting to an old monitor and having a VGA output “on board”. Here is one of popular models these tuners:

Note that it also has a VGA input. This allows you to turn on such a tuner “in-line” with the monitor connected to the computer, i.e. you can continue to use the monitor for its intended purpose, but at the same time watch TV shows when the computer is turned off without fiddling with cables. Although, if you "collect" the TV in the kitchen, this option is not needed.

How to convert a monitor into a TV with your own hands?

In addition to having the video output you need (usually VGA), when choosing a tuner, you should pay attention to the possibility of receiving a DVB-T2 / C digital signal, since outdated purely analog tuners are still on sale.

Some tuners also have an input for playing video, sound and photos from usb devices, but the presence of such an option significantly affects the cost of the device. By the way, monitors with a built-in TV tuner are now on sale, but they are difficult to find in price lists if you sort the list “in ascending order of price”.

There are situations when you need another TV, but buying it is not possible for a number of reasons. And here the question often arises - is it possible to connect the monitor how? If you have an old computer monitor at your disposal, it is quite possible to use it as a TV. There are several ways to do this, the easiest of which is to connect a TV tuner, external or internal.

How to use the monitor as a TV?

So, buying and installing a TV tuner - here reliable way to magically transform your computer monitor into a TV. The external tuner is an independent device that is connected to the mains, television antenna, to the PC unit and monitor.

In other words, a TV tuner is connected to the system unit and a monitor is connected to it. It is controlled using the remote control, as if you are dealing with the most ordinary TV.

If you don't need system unit, you can simply connect the TV tuner to the monitor directly and use it exclusively as a TV. In this case, you need to get speakers that will be connected to the appropriate connector on the tuner.

Is it possible to make a TV out of a monitor in another way?

Another method used experienced users to convert the monitor to a TV, this is the installation of a decoder in the monitor. Fortunately, modern monitors have an LVDS interface, to which you can connect a special expansion board with a built-in video decoder to turn conventional monitor to analog or even digital TV.

An analog board costs less than a digital board, but does not provide all the features that it has digital board with decoder. After purchasing the board, you can take it along with the monitor to the nearest service center for working with audio and video equipment, where everything will be mounted and configured for you. All that remains is to bring the antenna to the new TV, after which it will be completely ready for operation in a new role.

But if you have some radio engineering skills, then you can quite cope with installing the board yourself. All you have to do is remove back cover monitor, disconnect the cable to the standard expansion board and connect new board through a similar line. Write down the marking of the matrix in advance, so that later it will be easier to find the firmware.

Now you know the answer to the question - is it possible to use the monitor as a TV, and are free to choose a method that is more convenient for you.

There are times when it breaks old tv, and there is no point in repairing it. If the plans for the near future did not include a point on creating a home theater, then you should not run to the store for a new TV receiver - watching TV on a computer display may well satisfy. When the screen size does not play a big role, then it's up to the small thing - to learn how to make a TV out of a monitor.

Features of LCD monitors

In the memory of consumers average age category there are still bulky tube monitors with high level negative radiation from the kinescope. More compact versions of cathode ray tube (CRT) displays can still be found on the shelves of some stores. They have been replaced by completely flat models using liquid crystal (LC) technology. They have undergone many transformations to improve their performance and do not produce harmful radiation.

At first glance, modern LCD monitors are no different from TVs made using the same technology. The only difference between them is that the displays cannot show television programs due to the lack of a tuner. However, some developers have eliminated this blunder by releasing several models with a built-in TV receiver.

But still there are differences. And each device has its own characteristics.

1. For TV receivers diagonal choice much more than monitors. This is especially true of the gigantic screen sizes, which displays practically do not have.
2. Minimum allowable distance between the viewer and the TV is three diagonals of the screen, while from the monitor you can be at the length of your arm.
3. Pixels on the TV receiver screen are more noticeable, while a monitor, since it supports many formats, has more dots and is harder to see.
4. System elements latest models TVs are used more methods to interact than a monitor. But the personnel scan of the latter always uses only the most advanced.
5. If we take two devices with the same small diagonal, then the monitor will cost less. But if you compare the largest display with the same TV, then vice versa, the price of computer screen significantly higher.
6. Controllers are not available for monitors for remote control.

Of course, the most modern TVs that support the monitor function, these differences are significantly smoothed out. But we are not talking about these models.

Using the TV tuner

After buying a new monitor, the fate of the old one is to gather dust in the pantry. Meanwhile, it is easy to convert it into a full-fledged TV. To do this, you need to buy a tuner. But when choosing a device, you need to be careful - you will need a completely independent console, and not an application to a computer, even if it is external.

Important! A separate TV tuner is essentially a TV, but without a screen. This is achieved through the built-in motherboard. It remains only to connect the device to the monitor using a wired connection.

To connect, you need to use integrated RCA cable. You will also need access to an analog antenna. And if you want to watch programs in digital signal, then without DVB receiver T2 is indispensable.

Remote control included with tuner remote control. And if the monitor does not have built-in speakers, then you will have to connect separate speakers to the receiver. But in this regard, the choice of decision remains with the owner - sound can be output through home theater, even through the music center.

Of the pros This decision highlights the following points:

• when connected, no driver installation is required;
• the compactness of the TV tuner allows you to place it anywhere;
• simple and fast connection can also be applied to a laptop, temporarily turning it into a TV;
• it is possible to connect to both indoor and outdoor TV antenna.
• The tuner can be used as a hub for all home audio systems thanks to its own audio output.

Of the minuses you can note the very weak own speaker of the TV tuner (if any). Also, devices with a receiver are expensive and do not have USB ports.

Advice! Using an external TV tuner when converting a monitor into a TV is, perhaps, The best decision for places where there is no Internet coverage, or the network signal is very weak.

Using a TV box

If you have the Internet, you can use a TV set-top box to turn the monitor into a TV. They are different. By using T2 set-top box turns an ordinary monitor into a full-fledged TV showing a high-definition image. The conversion of a simple tuner into a digital receiver was described above and consists in adding a receiver. But Smart TV set-top boxes are an improved type of tuners with enhanced functionality: in addition to watching any TV programs directly from world wide web, you can surf the web and even enjoy gameplay without a computer.

Smart device advantages:

• access to youtube, social networks and other useful applications;
• support for both wired and wireless (Wi-Fi) connections;
• receiving a clear signal and demonstrating it on the monitor matrix creates a picture whose quality is much higher than the image on a conventional TV;
• the presence of a dual or quad-core processor in the console speeds up all the actions at times.

Of the minuses, they distinguish the impossibility of using the set-top box outside the Internet, the high cost and the mandatory presence of an HDMI-VGA converter. Also in this case, you need to be prepared for additional costs for the audio system, which also needs additional space.

Advice! From the above, it follows that making a TV from a Smart set-top box is an expensive pleasure, which is relevant only for the city. Using the method for the summer option will not work. Yes, and unprofitable.

Using the board

You can apply the option without a TV tuner - using a board (skyler), of which there are a great many. But of all the models it is better to choose universal ones - they contain a video decoder and all the necessary connectors, including HDMI and USB. Of these, there are three models.

1. MV29.P. A budget option. Although there is one USB port, it is only used for firmware.
2. MV56U. Already with USB support.
3. VST.3463.A. Provides reception of digital and analog television.

To make a TV in this way, you need to disassemble the monitor and instead of the LVDS board, install one of the three above. In this case, you may have to replace the cable and add a power supply. You also need to make sure that all the parts fit into the monitor case. If there are no certain skills, then you can not do without the help of a specialist. Of course, this can increase the cost of the operation, making it unprofitable.

other methods

Do not forget about installing the tuner, but already in the computer. Unlike independent device described above, there are three types of tuners that cannot be connected directly to the monitor - a computer or laptop is required for their operation.

1. Built-in TV box. Such a tuner is inserted inside a computer system unit or laptop.
2. External receiver. Connects to computer via ExpressCard.
3. Network tuner. The device is connected to the router, and the software is installed on the PC. The connection is used both wired and Wi-Fi.

If to the old monitor connect smartphone or tablet, then it can also turn out to be a TV. This procedure will require HDMI cable or VGA with adapters on mobile device. In the case of an Internet connection, online TV will be received on a smartphone or tablet and displayed on the display via wires. In the absence of a network mobile device works like a regular player. And on the big screen there will be a demonstration of the video that is recorded on the memory card.

Even easier to arrange online viewing TV broadcast via computer or laptop using IP technologies. For this you need:

• download IPTV player and install it on your computer;
• then you should load the playlist of channels in m3u format into the player, but you need to do this through the item "Address of the channel list";
• then you need to save everything and use it for its intended purpose.

Features of connecting CRT monitors

There is an option homemade TV from an old CRT monitor. Anyone who has not thrown away their first display with a tube kinescope can get a completely tolerable TV receiver for the kitchen or summer cottage. But this will require details, knowledge and experience in the installation of radio electronics. VGA inputpresent in every old monitor, and the necessary parts can be ordered online or visit a special store.

You will need:

• color module - it directly affects the image quality;
• TV radio channel - without it you can’t select desired videos and audio frequencies;
• control unit - it is desirable to take with an infrared port for coordination at a distance.

We disassemble the old monitor and remove the unnecessary control unit and video card from it. We place the purchased modules inside the case and connect them to the corresponding nodes. You may need to solder a few resistors, after which your DIY TV is ready. It remains only to check all systems and you can connect it to the antenna.

Disadvantages of a monitor as a TV

Very often, monitors have a higher screen resolution than a TV, so their image quality is higher. But since black depth on a computer display leaves much to be desired, the impression can be spoiled, especially if you watch a movie in the twilight. You also need to be very careful with adjusting the contrast - if you exceed its norm, the image will come out flat.

The response time of the monitor is specially made large than on TV. This is because the computer display was originally designed to work. It would be very difficult for a person to sit for several hours in front of a screen on which the picture changes very quickly. Therefore, the transitions between images are made smoother - for the eyes it is much better. But when viewing dynamic scenes, the color change will be late. For example, where there should already be black, white is still shown. Or there is an object from the previous frame on the screen.

Important! The work behind the monitor takes place in close proximity, so the developers do not take into account such a factor as the viewing angle. To prevent black spots from appearing on the screen and the picture not to be distorted, the viewer, when viewing video files, needs to be directly in front of the display - at a right angle.

From the foregoing, there are a number of disadvantages that are inherent in monitors that act as TVs:

• greater than that of teletechnics, signal response;
• lack of viewing angle;
• insufficient black depth;
• contrast problems.

More can be added the need to purchase adapters for VGA connectors. But this is not very significant.

Which monitor is better

An unequivocal answer to this question No. Experts say that the higher the screen resolution of the monitor, the better the picture will be.. Accordingly, it will be better to show such a home-made TV receiver, even in comparison with some TV models. Further, the factors that were described in the previous paragraph will influence.

But still, experts tested the suitability of the monitor to perform the functions of a TV. And in all positions, computer displays from South Korea, from famous manufacturer Samsung . They are far ahead of their closest competitors - Sony and LG. The rest of the lesser-known devices received low marks for these parameters.

So, turning an old and unnecessary monitor into a TV is quite within the power of any person. It is only necessary to choose from all the methods the one that fit better all in terms of finances and opportunities. Of course, you can always turn to specialists, and they will do everything at a professional level: both assembling the device and connecting it. But if you follow all the above recommendations, then everything can be done independently.

Popular TVs of 2018

TV LG 43UK6200 on Yandex Market

TV Sony KD-55XF9005 on Yandex Market

TV LG 49UK6200 on Yandex Market

TV Sony KD-65XF9005 on Yandex Market

LG OLED55C8 TV on Yandex Market