• Firmware for Meizu M2 Note smartphone. Reflash the Meizu M2 Note smartphone Updates on the Meizu M2 Note

    Meizu's smartphones are increasingly gaining popularity in the global market. Their devices are in incredible demand. In Android smartphones, you often have to change the firmware. This is explained by the fact that the Android operating system does not prohibit the user from performing various manipulations with the software shell, so inexperienced users can harm their device. Therefore, knowledge of how to reflash Meizu smartphones will be useful to many. From the very beginning, I would like to say that the Meizu M2 Note's firmware can be changed very easily compared to other Android smartphones. You will receive instructions on how to do this below.

    I would like to say right away that the firmware on the Meiza M2 changes quite quickly. This may be due to the fact that the devices of the Chinese company have the Flyme shell on board.

    You can reflash smartphones in a couple of ways: with or without a computer. The steps for these two methods will be very similar, so it will be equally easy both when flashing through the device itself and when using a PC.

    Download the firmware from the official website

    The most secure system firmware is available on the manufacturer's website. To download the firmware file, simply go to the official Meizu website and find the latest firmware version for your phone model. After downloading the file, you need to upload it to the root folder of your smartphone.

    There is no guarantee that you will be able to install everything and that the firmware will work properly. But as practice shows, even those who have never done this can reflash devices from Meizu.

    When you find and download the official firmware version to your smartphone, you will download a file named “Update.zip”; as the name suggests, the file is in zip format. It cannot be opened, much less modified in any way. You don’t need to do anything with it, it will install the firmware for you, the main thing is not to interfere with it.

    We start the smartphone in Recovery mode

    The next thing we need to do is launch Recovery Mode on the phone. To launch this mode on Meizu smartphones, you need to turn off the device and press the volume up button and the power button on the smartphone.

    To control and navigate through the Recovery Mod menu, use the volume rocker; to select the desired section, press the power button as if it were “ Enter".

    "System upgrade", then select “ Clear data".

    Note: During flashing, all data from the smartphone’s memory will be deleted, so you should worry about the safety of information important to you in advance. The best way to prevent data loss is to make a backup.

    After manipulations in recovery, the smartphone will install the firmware itself and automatically reboot. There are rare cases of failures, but this can happen if the file was downloaded damaged, or you somehow changed it. In this case, you need to download the file again and repeat all the steps.

    Using a computer

    Your computer can help you install the new firmware. The steps will be similar to the previous instructions. Please note that you will not transfer the file to the root folder of your smartphone, but first to your computer, and then to your phone.

    Download firmware

    As in the first method, you should download the firmware file from the manufacturer’s official website. For some reason, the vast majority of users take software from pirated sites, and then end up with “bricks”, or at least lost time and nerves.

    When choosing software, you should pay attention to the type of firmware, because there are 5 types. There are only three available for Meizu: a Chinese version, one universal version and an international version. You need the international version, since it has Russian and Ukrainian languages ​​immediately available and Google services are immediately available. Do not mix up the files; if you install the Chinese version, it will be extremely difficult to understand it.

    Checking the file name and extension

    Before transferring the desired file to your smartphone, be sure to make sure that the file name is “Update.zip” and that the file is in zip format. If you transfer a file to the device that does not meet these criteria, it may result in an error. The firmware may not be installed correctly or may not be found at all. After which the smartphone may be inoperable forever.

    Connecting your phone in Recovery mode

    As always, you will need to enable Recovery Mod. Only unlike the first method, after launching the engineering menu you need to connect the mobile device to the computer via a USB cable. The computer will recognize your device and show you the folder " Recovery" in "My Computer", you need to transfer the firmware file into it.

    Before flashing Meiza M2 Note, be sure to back up your files and settings. Often, when flashing, people forget about this, and after it, the lost data cannot be restored.

    Firmware

    After you have entered recovery, you need to click on “ "System upgrade", then select “ Clear data" and the "OK" button.If you did everything correctly, then your smartphone should receive an updated software version. Reflashing has a positive effect on the operation of the phone, because as you use it, you download many applications to the device that affect the system in one way or another. Some files can have a negative impact on the system, and even after deleting them, the device will slow down a little.

    After you flash your Meiza M2 Note, don’t rush to install hundreds of applications on it. If you do this, you will bring the new firmware to the same state as your old version. Use your smartphone wisely and don't demand more from it than it can handle.

    With this guide you will learn how to flash Meizu. The firmware will install the international version of the operating system on your Meizu smartphone. The international firmware no longer has Chinese apps, and Google Playstore can be installed with one click. Many languages ​​are also preinstalled. If you need to delete all data before flashing, see: how to do it to factory settings?

    Note. Follow the instructions at your own risk. We are not responsible for any damages.

    When you try to install an international ROM on Meizu, you will see “Firmware corrupt”. In fact, this means that your device has a Chinese ID and you need to go here. (For everyone who does not have Chinese firmware, go here).

    (How to flash Meizu? Go to the website depending on your phone firmware.)

    On the website, select your Meizu smartphone model, find the latest firmware version and download it. After following the steps of this guide, you will be able to install international firmware.

    Warning:

    1) Please do not update your phone with unofficial firmware.

    2) Before updating, make sure the battery has at least 20% charge.

    3) Selecting "Clear data" will delete all personal data (such as notes, email and contacts); whereas on the SD card there will be photos, music and videos... etc. (Only if you remove it from the phone).

    4) Already open system permission (ROOT), the user must select "Clear data" to clear the phone data to update the firmware, otherwise it may cause the system or application to abnormally error;

    5) After updating the firmware, if the system reboots or the power of the application closes, please try to reboot the phone or upgrade again (Settings->Phone->Storage->Factory Reset to reset the phone) Update method: Method 1. Flashing full.

    Flyme OS package on the phone (This part applies to all Meizu phone models.)

    Download the necessary files to prepare for installing the firmware.

    STEP 2: Installing firmware on Meizu phone

    Selecting "Clear Data" deletes all personal data (such as notes, email, and contacts). Whereas on the SD card photos, games and applications will remain untouched... etc. (If it is not in the device). Already available system permission (ROOT), the user must select "Clear data". In order to delete the phone data, the firmware will be updated afterwards, otherwise it may cause an abnormal system or application error.

    1) Copy the firmware “update.zip” to your phone, open “Documents” and click on “update.zip” to update the firmware.


    (How to flash Meizu? Click Wipe app data and your phone will flash itself.)

    1.1) If you download from your phone, create a folder on the internal memory and extract the archive there.

    2) System update, please do not turn off the phone.

    3) The system will automatically reboot after the update.

    4) Once enabled, check Settings->About to ensure the correct firmware version is installed.

    Method 2: Updating the zip file in Recovery Mode

    How to flash meizu, step-by-step instructions from recovery mode.

    1) Copy the firmware “update.zip” to the root directory of the SD card.

    2) After turning off the phone, first press the "Volume Up" button and hold it, then press the "Power" button, it will enter the recovery page. Select "System Upgrade" and click "Start". Wait a few minutes for the process to complete.


    How to flash Meizu? Click Clear data if you need to delete all data on your phone.)

    After the download is complete, the phone will reboot within 3-5 minutes. Changes to the system have been successfully completed. Once you're logged in, click the Settings icon on your desktop, then click About Phone. To view the current version number if the firmware version number matches a successful update.

    If the article “How to flash Meizu on a smartphone or tablet?” helped you, share it on social networks.

    The continuous development of the mobile phone market leads to the constant release of new smartphone models. The MEIZU company, which is rapidly gaining momentum, also constantly offers users more advanced lines of its devices. However, earlier MEIZU models remain in demand and attractive, which is achieved by maintaining the relevance of the software in the company’s products. In particular, the company regularly releases updates for its proprietary Flyme shell.

    For example, the Meizu M2 Mini is very popular among users, the firmware of which can be regularly updated, due to which the phone does not lose its relevance, although it was released in 2015. This review will focus on the topic of firmware for the above-mentioned phone. There are many firmware modifications for it, in particular:

    1. Firmware International is multilingual, including Russian language support. It is focused on the European market.
    2. Universal Public- This is a universal firmware provided for various phone models, and is also suitable for Meizu M2 Mini. The only thing worth noting is that it does not support the Russian language.
    3. Unicom tailored to the original Chinese firmware and also lacks the Russian language.

    In addition to official firmware, there are a large number of custom ones that are developed by users themselves. It is worth warning that you need to approach the installation of custom ones very consciously, since installing low-quality software can lead to phone malfunctions.

    Before you begin the installation, it is necessary to carry out the preparatory stage, which is no less important than the installation itself. First, you need to back up your data from your phone, as it will be completely lost. In order to do this, you need:

    1. Go to " Settings", then go to the section " Personal" and select the item " Memory and backups» .
    2. Go to section " Other" and select the function " Copy and restore» .
    3. Next, you need to select the storage where the data will be transferred by selecting “ Select storage location" After this, you need to select the checkboxes opposite the type of data that you want to copy. Having marked all the files, you need to click “ Start copying» .

    All deleted data from the phone will be easy to transfer back to it after the update, following the above points, only in the last point instead of “ Start copying"you will need to select " Restore» .

    The firmware process itself can be divided into the following stages:

    1. Download the firmware from the official website.
    2. Check the file name and extension.
    3. Launch your smartphone in " Recovery mode».
    4. Restart your Meizu smartphone.

    Let's consider each point separately.

    Download the firmware from the official website

    Before downloading the installer file, you need to prepare your phone, in particular, you need to make sure that the phone has a full battery charge. To download the official version, you need to go to the manufacturer’s website and select the latest firmware version. The downloaded file must be saved in the root of the device’s memory.

    After the file has been downloaded, it is critical to make sure that the file has the correct name and extension, otherwise the installation may not proceed correctly or may not start at all. To check the name you need to go to the root of the memory and find the file called "update.zip". If the installation file has a different name, the error “ Firmware not found» .

    We start the smartphone in Recovery mode

    To start the phone in " Recovery mode", you need to turn it off completely, and then press and hold two keys at once - " Enabling" and the upper part of the rocker " Volume" - until the phone name or the inscription " System Upgrade" After this, a field with firmware settings will open. In the field that appears, select “ System UpgradeStart", after which the firmware will begin to be installed.

    The installation process is quite lengthy and may take a certain amount of time. During the installation stage, you cannot use the phone yourself without turning it on or off. After installation is complete, the smartphone will reboot automatically, after which you will need to make some settings: select a language, connect to the network and other actions.

    Using a computer

    Installation using a computer is in many ways similar to the method described above and consists of the same steps. A computer is necessary when updating firmware using a phone is associated with any difficulties. Special utilities that help you install the firmware correctly will help optimize this process.

    Download firmware

    Before downloading the installation file, you need to configure the synchronization of your smartphone with your computer. The following actions should be taken:

    1. You must enable the " USB Debugging» . To do this, you need to go to " Settings" and select the item " About the phone", located at the bottom of the list.
    2. Next, tap five times on the item “ Firmware version: Flyme" until the notification appears " You are now in developer mode».
    3. After this you need to return to the point “ Settings" and enter the section " System", in which you need to select " Specialist. possibilities» .
    4. Next, go to the function “ For developers", where you need to switch the switch to active mode " USB Debugging» .

    Next, you need to download the firmware file to your computer (the download process from the manufacturer’s official website is described above). If it is not possible to save the firmware to the phone, then save it to the root of the memory card and insert it into the phone.

    Checking the file name and extension

    When downloading a file from the official Meizu website, it will have the name and extension “ update.zip» . And your downloaded file must have the same name and extension.

    Connecting your phone in Recovery mode

    To enable " Recovery", you must perform the same steps as for flashing the firmware using your phone, namely: simultaneously press and hold the " Enabling"And " Volume"(up). After this, the message “ Meizu" and the menu will load " Recovery mode" Putting the phone into this mode is an integral part of the process.

    Firmware

    In the field that appears, select “ System Upgrade" Next, you need to click on “ Start", after which the firmware will begin to be installed. During the installation of the firmware, the phone may reboot repeatedly. They can be either automatic or require user intervention. Therefore, it is necessary to carefully monitor the ongoing process. You can understand that the Meizu M2 Mini has been completely updated when the phone itself reboots and turns on in the form familiar to the user. Before fully working with the phone, you may need some settings that the device will offer to make.

    The rapid spread and growing popularity of smartphones from the Chinese brand Meizu are associated not only with the excellent price/performance ratio, but also with the presence in the devices of the proprietary FlymeOS operating system based on Android, under which all the manufacturer’s devices operate. Let's look at how this OS is updated, reinstalled and replaced with custom firmware on one of the most popular models from Meizu - the M2 Note smartphone.

    Before moving on to the procedure for reinstalling the system software, it should be noted that the process of updating and reinstalling the firmware on Meizu devices is one of the safest and easiest compared to Android devices from other brands.

    There is some risk of damage to the software only when installing modified solutions from third-party developers. However, we should not forget the following.

    The owner of the smartphone independently decides to carry out certain procedures with the device and is also independently responsible for the results and consequences! The site administration and the author of the article are not responsible for possible negative consequences of user actions!

    Before the installation procedure for the system software in Meizu M2 Note begins, you should find out what firmware is installed in the device and determine the ultimate goal of manipulating the device, that is, the version of the system that will be installed.

    Currently, the following firmwares exist for Meizu M2 Note:

    • G(Global) – software installed by the manufacturer in smartphones intended for sale on the international market. Software with index G is the best solution for users of the Russian-speaking region, since in addition to appropriate localization, the firmware is not replete with Chinese applications and services that are unnecessary in most cases, and can also be equipped with Google programs.
    • I(International) is an old designation for the Global firmware, used to classify software based on the outdated and practically unused Flyme OS 4 today.
    • A(Universal) is a universal type of system software that can be found in M2 Note devices intended for both the international and Chinese markets. Depending on the version, it may not be characterized by the presence of Russian localization; Chinese services and applications are present.
    • U(Unicom) C(China Mobile) - system types for users living and using Meizu smartphones on the island part of China (U) and inside the rest of the PRC (C). There is no Russian language, as are Google services/applications; the system is replete with Chinese services and applications.

    To determine the type and version of the operating system installed on the device, you must do the following.

    Where to get firmware

    The manufacturer Meizu provides the ability to download firmware from its own official resources. To get the latest FlymeOS packages for M2 Note, you can use the following links:


    All packages and tools used in the examples below are available for download from the links that can be found in the corresponding instructions in this material.

    Preparation

    Proper preparation determines the success of almost any event, and the software installation process in Meizu M2 Note is no exception. To achieve the desired results, we do the following.

    Drivers

    As for pairing Meizu M2 Note with a computer, the phone usually does not provide its users with any problems with this issue. The drivers necessary for interaction between the device and the PC are integrated into the factory firmware and are most often installed automatically.

    If automatic installation of the necessary components is not performed, you should use the virtual CD built into the device’s memory, which contains the installer.


    In case M2 Note does not load into Android, and using the built-in SD is impossible, the contents of the latter can be downloaded from the link:

    Flyme account

    By purchasing a Meizu device running the proprietary Flyme shell, you can count on the opportunity to take advantage of all the benefits of a fairly developed ecosystem of applications and services created by the smartphone developer. To gain access to a number of functions, including those that will be needed in the process of preparing for firmware, you need a Flym account.

    Note that registering an account and adding it to your phone greatly simplifies obtaining root rights, as well as creating a backup copy of user data. This will be discussed below, but in general we can say that a Flyme account is necessary for every device owner. You can register an account directly from your smartphone, but, for example, on Chinese versions of FlymeOS this may be difficult. Therefore, the most correct thing to do is to carry out the process of creating an account from a PC.

    1. Open the page for registering a new account by following the link:

    2. We fill in the telephone number input field by selecting the country code from the drop-down list and entering the digits of the number manually. Then click "Click to pass" and complete the simple task “You are not a robot.” After this the button becomes active "Register now", press it.

    3. We are waiting for an SMS with a verification code,

      which we enter into the appropriate field on the page of the next registration step, and then click "NEXT".

    4. The next step is to come up with and enter in the field "Password" account password and then click "SUBMIT".

    5. The profile management page will open, where you can set a meaningful nickname and avatar (1), change the password (2), add an email address (3) and security questions to restore access (4).

    6. Set the Account Name, which you will need to enter on your smartphone:

      Please note that as a result of the manipulation we obtain a login for access to the Flyme account of the form [email protected], which is both a login and an email in the Meizu ecosystem.

    7. On your smartphone, open the device settings and go to "Flyme account"(“Flyme Account”) section "Account"(“Account”). Next, click "Login/Register"(“Login/Register”), then enter the Account Name (top field) and password (bottom field) specified during registration. Click "Log in"("ENTRANCE").

    8. At this point, account creation can be considered complete.

    Backup

    When flashing any device, a situation where all the data contained in its memory, including user information (contacts, photos and videos, installed applications, etc.) will be deleted is a standard and quite common case.

    To prevent the loss of important information, it is necessary to back it up. As for Meizu M2 Note, creating a backup can be done using various methods. For example, you can use one of the ways to save information before flashing Android devices from the article:

    In addition, the manufacturer has created a good tool for creating a backup copy of important data for Meizu smartphone users without using third-party tools. Using the capabilities of your Fly account, you can fully or partially save a copy of almost all your data, including system settings, installed applications, contacts, messages, call history, calendar data, photos.


    Additionally. Synchronization with Meizu cloud.

    In addition to creating a local backup, Meizu allows you to synchronize basic user data with your own cloud service, and, if necessary, restore information by simply logging into your Fly account. To implement constant automatic synchronization, do the following.


    Obtaining root rights

    To perform serious manipulations with the Meizu M2 Note system software, Superuser rights are required. For owners of the device in question who have registered a Flyme account, the procedure does not present any difficulties and is carried out using the following official method.


    Additionally. In the event that using a Flyme account and the official method of obtaining root rights is impossible for some reason, you can use the application KingRoot. Manipulations through the program carried out in order to obtain Superuser rights are described in the material:

    ID replacement

    When switching from software versions intended for use in China to Global firmware, you will need to change the hardware identifier. By following the steps of the instructions below, the “Chinese” Meizu M2 Note turns into a “European” device into which you can install software containing the Russian language, Google services and other advantages.

    1. Make sure you have Superuser rights on the device.
    2. Install the “Terminal Emulator for Android” application in one of the following ways:

    3. Download the archive containing a special script for changing the Meizu M2 Note ID.
    4. Unpack the package with the script and place the file chid.sh to the root of the smartphone's internal memory.

    5. Let's launch "Terminal Emulator". We write the command su and press "Enter" on the virtual keyboard.

      Grant root rights to the application – button "Allow" in the request window and "Still Allow" in the warning window.

    6. The result of executing the command above should be the change of the $ symbol to # in the terminal command line. Write the command sh /sdcard/chid.sh and click "Enter". After this, the device will reboot automatically and start up with a new identifier.

    7. To make sure everything was successful, you should perform the above two steps again. If the identifier is suitable for installing the global version of the OS, the terminal will issue a corresponding notification.

    Firmware

    Below are two possible ways to install, update and roll back to an earlier version of the official FlymeOS in Meizu M2 Note, and also provide instructions for installing modified (custom) solutions. Before performing any manipulations, you should study the instructions for the selected method from start to finish and prepare everything you need.

    Method 1: Factory recovery

    This official method of installing the system is the most preferable from a safety point of view. Using this method, you can update FlymeOS, as well as roll back to earlier versions. In addition, the method may be an effective solution if the device does not boot into Android.

    In the example below, FlymeOS 5.1.6.0G version is installed on a device with FlymeOS 5.1.6.0A and a previously changed identifier.

    1. Download the package with system software. The archive used in the example is available for download at the following link:
    2. Without renaming, copy the file update.zip to the root of the device’s internal memory.

    3. We boot into recovery. To do this, with the Meizu M2 Note turned off, hold down the volume up button and, while holding it, press the power key. After vibration "Enable" let go, and "Volume+" hold until the screen appears as in the photo below.

    4. If the update package was not copied to the internal memory of the device before entering recovery, you can connect the smartphone in recovery mode to the PC with a USB cable and transfer the file with the system to the device’s memory without booting into Android. With this connection option, the smartphone is detected by the computer as a removable disk "Recovery" with a capacity of 1.5 GB, into which you need to copy the package "update.zip"

    5. Place a check mark on the item "Clear data" which involves data cleaning.

      If you are updating the version and using a package with the same type of firmware as the one already installed to install, cleaning may not be necessary, but in general, this operation is highly recommended.

    6. Press the button "Start". This will begin the process of checking the software package, and then start the installation process.

    7. We are waiting for the installation of the new version of Fly to finish, after which the smartphone will automatically reboot into the updated system. You just need to wait for the installed components to initialize.

    8. It remains to carry out the initial setup of the shell, if data was cleared,

    Method 2: Built-in update installer

    This method of installing system software in Meizu M2 Note is the simplest possible. In general, it can be recommended for updating the FlymeOS version on fully working smartphones.

    When using this method, all data contained in the smartphone is saved, unless otherwise specified by the user before installing the update. In the example below, the official FlymeOS 6.1.0.0G firmware is installed on top of version 5.1.6.0G installed using the first method.

    Method 3: Custom firmware

    The technical characteristics of Meizu M2 Note allow third-party developers to create, and device owners to install and use very functional versions of system software, which are based on modern versions of Android, including 7.1 Nougat. Using such solutions allows you to get the latest software without waiting for the developer to release an update to the official FlymeOS shell (it is likely that this will not happen at all, because the model in question is not the “freshest”).

    Many modified operating systems have been released for Meizu M2 Note, based on the solutions of such well-known development teams as CyanogenMod, Lineage, MIUI Team, as well as ordinary enthusiast users. All such solutions are installed in the same way and require the following steps for installation. Follow the instructions carefully!

    Unlocking the bootloader

    Before it becomes possible to install modified recovery and custom firmware in Meiza M2 Note, the device’s bootloader must be unlocked. It is assumed that before the procedure, FlymeOS 6 is installed on the device and root rights are obtained. If this is not the case, you should follow the steps of one of the system installation methods described above.

    An almost universal flasher for MTK devices is used as a tool for unlocking the bootloader of Meizu M2 Note SP FlashTool, as well as a set of specially prepared image files. We download the archive with everything you need from the link:

    If you have no experience working with SP FlashTool, it is highly recommended that you familiarize yourself with the material describing the basic concepts and purposes of the procedures performed through the application.

    Read more: