Apple watch installation. How to connect a smart watch to an iPhone. Is it possible to connect Apple Watch and another Bluetooth device to iPhone at the same time?

The Apple Watch is a device that is designed to work side by side with the iPhone. This is an iPhone accessory, they have a very close relationship. That's why setting up an Apple Watch feels, in many ways, like installing a peripheral or software package on your computer. But in this case, you are "installing an accessory" for your iPhone. After pairing them, all the necessary applications will also be installed.

Pairing a smartwatch and iPhone is a fairly simple process, but it does take some time; be prepared to spend at least 20 minutes. Also, make sure Bluetooth and Wi-Fi are turned on on your iPhone, as the Apple Watch needs Bluetooth to connect to your iPhone. Lastly, you must have an iPhone 5 or later; the Apple Watch does not work with other phones.

Step 1: Connect the charger to your watch.
Apple Watch comes fully charged, but to ensure safety, simply plug in the included charger and secure the magnetic end to the back of Apple Watch.

Step 3: Open the Apple Watch app on your iPhone.
Your watch will now show a message asking you to open the Apple Watch app that came pre-installed on your iPhone a few weeks earlier (if you've already updated to iOS 8.2 or later). Do this and you should now be able to start the connection process.

Step 5: Agree to all terms and create a password.
You'll be asked to accept the license terms, Siri, diagnostics, and approve device verification using iCloud. These are not options - they are required. You will also be asked to create a password. It can be four digits or more in length. This will protect you if the watch is removed from your wrist.

Step 6: Decide if you want your Apple Watch to be unlocked by your iPhone.
This question will be asked in a pop-up window on the Apple Watch. Basically, this means that while your watch is on your wrist and paired with your iPhone, you won't have to enter a passcode. Say "Yes" (you can change your mind later).

Step 7: Wait for the synchronization to complete.
Apple Watch will run through all your apps and download the ones that are supported by the watch (iPhone apps "contain" Apple Watch apps if they're optimized for the watch). An indicator in the form of a filling circle around the Apple logo shows the synchronization process. This may take 10 minutes or more, so put your iPhone nearby and plug it into the charger, just like your watch, and you can go and have some tea.

The devices are gradually being distributed to users and therefore it’s time to discuss setting up the watch and synchronizing it with the iPhone.

The first step is to turn on the device. To do this, press and hold the side button until the Apple logo appears on the screen. After this, a menu will appear from which you can select a language.

Then a window will appear in which you will be prompted to launch the Apple Watch application on your iPhone (it is automatically installed when you update the firmware to iOS 8.2).
Once the application is open, click the button Start Pairing— a specific animation will appear on the screen.

At the same time, after launching the Apple Watch program on your iPhone, also click in it Start Pairing.
Next, there are two possible synchronization methods - automatic using the camera and manual. In order to use the first method, you need to point the iPhone camera at so that the watch display is within the yellow square on the smartphone screen. In this case, the devices are automatically synchronized.

In order to use the manual method, you need to click on the “ i» in the lower right corner of the display. The identification number of your gadget will appear on the screen. You should click on the menu in the application on your smartphone Pair Apple Watch Manually and manually enter the watch number.
After this, synchronization will be completed.

Next, in the iPhone application, click on the button Set Up Apple Watch and in the window that opens, select which wrist you will wear the watch on.
Next, a standard window will appear in which you should indicate that you agree with all the company’s terms and conditions.
After this, a screen will appear with a field in which you must enter the password for your Apple ID.
The next window will provide information about your device's location services. You cannot refuse to use it, so click on the button OK and move on to the next step.
Next, a message appears stating that you can use the Siri virtual assistant on your watch to write messages and make calls. Click again OK.
The next window will ask you if you agree to send (automatically) bug information to Apple for improvement. Choose any answer option and move on.
Now you have the opportunity to create a password for your watch. This function is necessary in order to protect data if the gadget is lost or stolen. The system will prompt you for a password every time you put the watch on your wrist.
Creating a password is an optional step, but if you decide to add one, then click Create a Passcode. You should then enter the code twice on your watch.

Thanks to the password you will be able to unlock from your iPhone. When you enter the password on your smartphone, the watch will automatically unlock (if you have it on your wrist). If the watch is not with you, you will have to enter a password each time in order to use the data on it. If you agree to these terms, then click Yes and move on to the next step. It is important to know that you can refuse to use a password at any time by changing this item in the settings.

Next, you can install the versions of the watch application already installed on your smartphone. You can also postpone this step until later.
And finally, the last setting item is synchronization with iCloud. Photos, calendars, notes can now be viewed on your watch. In addition, your Email accounts that you use on your iPhone are synchronized. This stage may take some time.
The setup and synchronization is completed and the device is ready for use.

We present to the attention of all future Apple Watch owners instructions for activating, setting up and synchronizing with a smartphone. Before you buy this fashion accessory, it's worth knowing that to use it you need to have an iPhone 5 or later with iOS 8.2 installed on it. and above, as well as Apple ID. Only if you have these characteristics, and after you have decided on the watch model, you can safely buy it.

Turning on Apple Watch for the first time

Turn on Bluetooth on your iPhone. You can do this from the “Settings” menu, or call up the “Control Panel” with a regular swipe, and turn on Bluetooth there.

Make sure that your smartphone is connected to the Internet via Wi-Fi or your mobile operator's network.

It's time to turn on the Apple Watch - to do this, press and hold the side button located next to the Digital Crown. Wait until the Apple logo appears on the device screen.

To minimize problems during the process of setting up and synchronizing your watch with your smartphone, you need to make sure that both of your devices are charged.

Setting up Apple Watch and syncing it with iPhone

How to enable automatic device synchronization?

On your watch, tap “Start Pairing.” After this, a specific animation should appear on the Apple Watch screen. After the watch setting program starts on your iPhone, click “Start Pairing” in it.

Now you need to point your smartphone camera at the Apple Watch screen with the animation depicted on it. The yellow square on the iPhone screen should completely coincide with the frames of the watch display. After this, the devices synchronize with each other automatically.

Manual synchronization mode

In order to manually synchronize your Apple Watch and iPhone, you need to click on the “i” symbol located in the lower right corner, after which the watch identification number should appear on the screen. Now, in the app on your smartphone, you need to click “Pair Apple Watch Manually” and then manually enter the number.

Setting up your Apple Watch

• After a notification appears on the iPhone screen that the pairing has been successfully created, you need to click on “Set up Apple Watch as new.”
• Choose how you want to display content on your watch screen based on which hand you'll be wearing it on.
• Agree to Apple's terms and enter your ID.
• Once you agree to the geolocation service, you will no longer be able to cancel this action.
• Confirm using Siri.
• Confirm or decline your consent to the automatic error reporting service.
• Set a 4-digit password. To increase security, you can set a 7-character password.
• With a passcode, you can unlock your Apple Watch from your iPhone. If the watch is on your wrist, the password entered from your smartphone will unlock it automatically. If the watch is not near you, in order to use the data from it, you will have to enter the password every time.
• You can automatically install all available apps on your Apple Watch, or you can do it manually later.
• Sync your accessory with iCloud to view photos, email, notifications, calendars, and messages on your watch screen.

Setting up your Apple Watch and syncing it with your iPhone is now complete.

The Apple Watch isn't one of the must-have gadgets for everyone, but using it can make a number of tasks easier. For example, listening to music without using an iPhone or determining physical activity, which may be necessary for people monitoring their health. Knowing how to use iWatch, you can receive SMS messages and phone calls on your watch - not only from iPhone, but also from models running Android OS.

Enable

The first question a watch user has is about turning it on. There are three ways how to turn on Apple Watch:

Switching off is done with the same side button by holding it until the Off slider appears on the screen. and swiping it away. Or simply cover the watch with your palm - the light sensor will work and the screen will go dark.

Setting up a smart watch

The next important question is how to configure the Apple Watch for further work. To do this, you will need an iPhone, preferably with the latest version of the iOS operating system. The first generation smartwatches required an iPhone 5. The Apple Watch Series 3, sold since September 2017, cannot be set up without an iPhone 6 model.

In order to connect Apple Watch to iPhone, you need to synchronize the devices with each other. The pairing process with the third series of watches will not take much time:

1. The Watch application is downloaded to the smartphone, in which the button to create a pair with a smart watch is pressed.
2. The iPhone is brought up to the watch.
3. On the watch, press a similar button in the settings.
4. The iPhone camera viewfinder is pointed at the watch screen, where a picture resembling a galaxy appears.

After a certain time, which is required for gadgets to synchronize, it becomes possible to configure the smart watch directly from the iPhone.

If synchronization is not required (another iPhone will be connected to the watch), unpair Apple Watch can be done as follows:

1. Open the Watch application on your smartphone.
2. Select the “My Watch” tab at the bottom of the window.
3. Select the connected Apple Watch and click on the icon i".
4. Click “Unpair Apple Watch.”
5. Confirm the cancellation of device synchronization, after which all data about the watch will be deleted from the gadget.

First setup

To create a pair with an Apple Watch, bring your iPhone (with Bluetooth turned on) to the watch and perform the following steps:

1. After a message appears on the phone screen about the opportunity to start setting up, click “Continue”.

2. Place the center of the watch display exactly opposite the iPhone camera viewfinder.

3. Choose the hand on which the gadget will be worn.

4. Enter the Apple ID password, with which the user has access to various services.

5. Set up the operation of geolocation, the Activity application and, if necessary, mobile communications from the iPhone.

6. Install applications from the online store and configure various useful services.

The first time you use it, you will have to spend more time setting it up. Other parameters (including the gadget access password) can be changed later. This does not always require an iPhone - some of the settings are also available from the watch.

For example, to change watch face on Apple Watch You just have to press hard on the screen. The watch face gallery will open. You need to scroll through it with a swipe gesture and select the option you like.

It won't be difficult change language on Apple Watch. Just go to the screen for writing a message or reply and press firmly on the display. A language selection button will appear. The replacement can also be performed from a smartphone - the language selected on the iPhone for typing SMS is automatically installed on the watch.

Digital Crown button

A novice watch user might be interested in learning about the Digital Crown on the Apple Watch. What is it and what functionality does it have? The main purpose of the part is to scroll through images, lists and maps, control sound, font sizes and other sliders. It is possible to use it to call up a list of telephone numbers, to which you can then send a dictated SMS message or call.

Additional features of the Digital Crown include:

• open the last running application by double-clicking;
• activation of the Siri voice assistant with a long press;
• use as a Home button;
• transition to dials.

Using this element, the user speeds up switching between different applications. To do this, double-click on the wheel. It also takes screenshots of the watch screen - but only if you press the side button at the same time.

Synchronization with Android OS

If you don't have an iPhone, you should know how to connect an Apple Watch to Android - although the functionality will be severely limited. To synchronize mobile gadgets, the user is required to:

1. Install the Aerlink: Wear Connect for iOS application on your phone by downloading it from the Play Market;
2. Download the BLE Utility utility to the smart watch;
3. Launch Aerlink by activating iOS Service;
4. Open the Peripheral tab in the BLE Utility app on your watch.

Sometimes synchronization is not completed the first time, so the steps will have to be repeated. The connected watch and smartphone do not form a real pair, as when using an iPhone. In this case, the Apple Watch can only monitor the phone's charge, receive SMS and call notifications. There are no options for sending a message, making a call or answering a call.

Multimedia

When all the settings are completed, you can begin downloading useful information to the smart watch, including multimedia files. When synchronizing with an iPhone, it becomes possible download music to Apple Watch to listen to it even if you are not paired using the AirPods wireless headset. Instructions for downloading audio files to your watch are as follows:

1. The Watch application is launched on the smartphone and the music folder opens.
2. The required number of melodies is selected (about 2 GB are available on the smart watch, which is enough for 150–200 tracks).
3. Start synchronizing the created playlist, which may take from 10 minutes to several hours.

Synchronized melodies can be played directly from the watch, even if the iPhone is turned off, not charged, or is far away. Before starting, you will first have to change the music source in the Select Source settings menu. The result is the ability to use the Apple Watch like an iPod.

How to set up WhatsApp

Since the application developers have not yet adapted WhatsApp for the Apple Watch, its functionality may be somewhat limited. To set up notifications, you need to:

1. Download WhatsApp to your phone;
2. In the Watch app on your iPhone, set the appropriate switch.
3. In the WhatsApp settings on your smartphone, activate all items in the Notifications menu.

To remove an application, simply disable the setting on your iPhone that is responsible for using the application on the Apple Watch.

Sports functions

The default list of installed smartwatch applications includes the “Activity” utility, which allows you to track physical activity and determine a number of indicators:

• the “Mobility” ring is responsible for counting calories burned;
• the “Exercise” ring monitors the intensity of your workouts;
• the “With warm-up” ring monitors the user’s activity during periods when he moved for at least 60 seconds. contract.

For detailed information on filling out rings, just swipe up. With another swipe, you can get data on the number of steps, distance traveled, and training information.

The application also allows change the activity goal in Apple Watch. To do this, you need to press hard on any screen in the “Activity” program and set the required Calorie value. Changing tasks for Warm-up and Exercises is not available.

Apple Pay

Among the convenient functions of the gadget is the ability to pay with Apple Watch instead of a bank card. To do this, you will have to connect to the corresponding service using your Apple ID profile. To set up Apple Pay on Apple Watch you need:

1. Open the program on your iPhone first.
2. Transfer it to your watch via the Watch app.
3. Add a card to the list.

Cards that have already been used to pay for purchases in the App Store or iTunes Store are added by entering their security code. You will have to take a photo of the new payment instrument with your iPhone camera and follow all the instructions in the application. Sometimes it takes a few minutes for the bank to verify the identity of the cardholder.

To make a payment by hour you must:

• make sure that the store accepts payment using this method (one of the symbols);
• Double-click the side button to use the default card;
• keep the watch display a few centimeters away from the contactless reader;
• wait for the clock to pulsate slightly.

Protection Features

Expensive smartwatches are protected against counterfeiting and theft. In order to check Apple Watch for authenticity open the gadget settings and in the “Basic” menu find the field with the serial number (IMEI). For the third generation of watches, this option is available using an iPhone synchronized with them. The device information contains all the necessary information, including IMEI. You can also find the serial number on the watch case or strap connector.

The model is protected from unauthorized access by a password. It is not necessary to install it, but if there is confidential information on the watch, it is worth taking care of protection. Sometimes users have questions how to unlock Apple Watch if you forgot your password. This is not difficult to do - just remember your Apple ID details and reset your watch.

Reset Apple Watch to factory settings You can use a paired iPhone and the watch app installed on it. Information is erased directly from the gadget - after connecting to the charging cable, disconnecting using the side button and selecting the option to delete content and settings in the menu that appears. After the reset, the password disappears; to continue working with the Apple Watch, you will have to synchronize with your smartphone and go through the setup procedure - or restore a backup copy.

Firmware update

For smart watches, it is possible to replace the old firmware. In order to update Apple Watch OS 4 You will need an iPhone with the latest version of iOS. The user's actions in this case should be as follows:

1. Make sure that the watch is charged at least 50%, connect it to the charger.
2. Connect your iPhone to the Wi-Fi network and place it next to your watch.
3. Open the Watch program on your phone, go to main settings and select software update.
4. Download an update - sometimes you have to enter a password to do this.

Reflashing may take about an hour. During the update process, you cannot remove the watch from charging, close the Watch app on your phone, or restart at least one of the synced devices. Knowing how to flash an Apple Watch, you don’t have to worry that the operating system installed on the gadget will become outdated and will not support new functions.

If your smartwatch is frozen, rebooting will help restore it to normal operation. In order to restart apple watch you can use two methods:

1. Press the side button and swipe your finger across the screen when the Power Off menu appears. The key is held until the manufacturer's logo appears.
2. By pressing the Side button and Digital Crown at the same time, releasing them only after rebooting.

To increase the operating time of the smart watch, the list of options includes a battery saving mode. When using it, the gadget only shows the time and cannot synchronize with phones. Eco mode automatically turns on when the battery charge drops to below 10%. Thanks to this, the watch can work for several more hours. If required turn off eco mode on Apple Watch, the gadget will have to be rebooted using the side button. Automatic shutdown occurs after charging.

To charge Apple Watch use a special cable and power adapter connected to the mains. The gadget should be placed on the charger with its back side and wait until the charge indicator shows 100%. The process of restoring battery capacity lasts up to 2 hours. After which the gadget will work for 18 hours in normal mode and will hold a charge for up to two days if you use it just like a watch.

How to find Apple Watch using iPhone

To find your watch, you'll need an iPhone, iPad, or iPod touch running iOS 10.3 or higher, and the Apple Watch itself must be turned on.

1. Install the application Find iPhone;
2. Log in (Apple ID login and password for your iCloud account);
3. In the My Devices tab, select Apple Watch;
4. Select option Actions. When your Apple Watch is turned on, you can track its location on a map, mark it as lost, erase all data from the device, or play a sound to locate your watch.
5. If you are sure that your Apple Watch is in close proximity, you can press Play sound. The watch will start beeping repeatedly;
6. If the clock is found, you should turn off the sound by clicking on the option Close on the dial.

Application Find iPhone will be useless if the iWatch is turned off or out of Wi-Fi range. In this case, you need to use the lost mode in Find iPhone to block the device and track its geolocation. When someone finds and turns on your watch, you will immediately receive a notification.

How to connect Apple Watch to Wi-Fi

A Wi-Fi connection makes it possible to use the gadget’s advanced functionality, for example:

• use the Siri voice assistant;
• create Reminders and Calendar Events;
• control Apple TV;
• receive and send messages.

The connection occurs automatically to the Wi-Fi network in which the iPhone previously connected to the watch was registered.

Let's look at the features of connecting in manual mode:

• Make sure Bluetooth and Wi-Fi are turned on on your iPhone;
• check whether the devices are connected to each other;
• disable Bluetooth, the watch will be connected to the smartphone only via Wi-Fi connection;

Now you can use all the functions of Apple Watch even at a great distance from your iPhone. The Bluetooth range is only 10 m, but with this connection the watch's battery power is consumed less intensively.

How to turn off Voice Over on Apple Watch

There are two ways to turn off screen sound:

1. Touch the display with two fingers. To resume dubbing, you must do the same.
2. In order to completely turn off voice acting, you need to open Settings in the watch menu. Next is the Basic tab, then select Universal Access and click on the VoiceOver button.

How to track your sleep

Unfortunately, the developers do not provide a built-in sleep tracker on the Apple Watch. But it is possible to use third-party applications for analysis, for example:

• AutoSleep.
• Sleep++
• Sleep Tracker.
• Pillow (perhaps the best app for monitoring sleep. It also has a Smart Alarm function).

How to measure blood pressure

Apple Watch does not measure blood pressure. On the Internet you can only find information about the company’s future developments to introduce this function into subsequent watch models.

Not receiving notifications on Apple Watch

The following steps will help solve this problem:

• disable wrist recognition;
• disable Do Not Disturb or Screen Lock mode;
• break and re-create a pair;
• perform a factory reset;
• cleaning the sensors that are adjacent to the wrist.

How to change the strap

It's very easy to do. So, for example, you can replace a boring or worn-out sports strap with a leather or even Milanese mesh bracelet. Fortunately, the choice on the market is simply huge.

To change you need:

• Turn the watch over with the display facing down;
• Press the strap lock button;
• Move the strap to the side while holding the lock button.

This article will talk about how you can connect an Android watch to an iPhone. Finally, this has become possible, and you don’t even have to jailbreak your Apple smartphone.

The first to do this was a programmer under the nickname Mohammad AG: in confirmation, he published a video where it is clearly visible that notifications from the iPhone are perfectly transmitted to the wonderful “smart” watch. Unfortunately, the craftsman never released his synchronization application, which other programmers have successfully done, thanks to which any owner of both a smartphone and an Apple tablet will be able to connect an Android smartwatch to their gadget without any problems.

It is noteworthy that for the first connection you will still have to use a phone based on the operating system from Google. This is where you will first need to connect your watch. As an example, a Sony SmartWatch 3 was linked to an Xperia Z3 smartphone. After this, you will need to install the free Aerlink application on your smartphone, which will instantly appear in the main menu of the smartwatch.

For the next manipulation you will need to use an iPhone. You need to download a small utility called BLE Utility from the app store and run it. Next, take the watch and open the previously downloaded Aerlink program on it and try to search for devices. While the watch is searching for a smartphone, on the iPhone we go to the Peripheral tab.

Now the devices are guaranteed to find each other, you just need to enter the connection code without errors. This is exactly how a working connection between iOS and Android Wear is done.

Possibilities

What can a smart watch do when paired with an Apple gadget? Any notifications work just great. When you swipe any of them, the notification will instantly disappear on your smartphone. Music control does not raise any questions: both volume control and rewind work. Of course, accepting and rejecting calls also works great, with the dialer look on the watch being designed in a style very reminiscent of iOS.

Flaws

Not without a fly in the ointment. For example, the watch always shows that some error occurred when connecting to an Android smartphone. The Internet also does not work, therefore Google voice control is not available. It is not possible to reply to an incoming message using voice, and long text cannot be expanded.

But, the utility provides features previously unavailable to iOS users. In addition, thanks to the utility, the watch works with both iOS and Android devices, and battery consumption remains at the same level. This method with an Android watch is suitable for those who, for some reason, do not like the recently released ones or want to have a round “smart” watch at their disposal.