• Safe mode on android how to disable nokia. How to turn on and off safe mode in Android - a guide to action

    Many users turn on safe mode (Android). How to turn it off? Typically, devices running on this platform switch to it if the operating system is damaged or when third-party applications cause any malfunctions in the device. There are several ways to remove it on Android.

    Restarting the device

    First, it is necessary to determine the reason for turning on this very mode. It is activated, as a rule, due to a system failure or a serious error in an application. In safe mode, the user will not be able to launch any third-party applications. If suddenly the device goes into it, then you just need to reboot the device, and the problem will be solved.

    Checking the notification panel

    In some versions of the operating system, a notification is sent to the user when entering safe mode (Android). You can turn it off by pressing. The device will automatically reboot and start in normal mode.

    Pressing and holding the power button

    When you perform this action, a menu will open where you must select reboot or shutdown. In the second case, you need to remember to turn the device back on. It will boot normally. And if this did not happen and everything happened again, how to remove safe mode on Android? More on this later.

    Pressing two buttons at the same time

    Many users claim that you can exit this mode if you press and hold the power button and the volume down button at the same time as the device reboots.

    If the user has a broken volume button on their device, this step may lead to the device constantly rebooting into safe mode. In this case, you will have to take the gadget to a service center or, if you have enough knowledge and skills, open it and try to fix the problem yourself.

    Removing the Battery

    How can I remove safe mode on Android? If possible, you can remove the battery from the device and, perhaps, it will work as usual after turning it on. Before removing the phone or tablet, be sure to turn it off. You must wait at least one minute for the capacitors in the device to completely discharge, and then insert the battery back and turn it on.

    Uninstalling apps

    Crashing apps are the most common reason why a device goes into safe mode. To exit it, you need to remove recently installed programs.

    To do this, you need to open the gadget settings, open the list of all installed applications and go to the downloaded tab. These programs cannot be run in safe mode, but they can be removed. It is recommended to get rid of all programs that were installed in the near future. After this, the device must be rebooted. If it doesn't work, then you need to move on.

    Reset the device

    How to remove safe mode on Android (tablet or phone) if none of what was described above helps? Reset your device.

    The first thing you need to do is create a backup copy of all your data in safe mode. Resetting all settings will completely delete all information on the device. It will become the same as it was when it was first launched. This is why it is recommended to back up data that should not be deleted. How to do this? The following methods exist:

    • connect the gadget to your computer and copy all the necessary data from it to your hard drive or cloud storage;
    • all applications that were purchased with money will be saved and can be installed again after a reboot;
    • When resetting the settings, contacts will not be affected, but in order to minimize the risk, it is better to export them to a separate file.

    How to reset?

    This step is carried out through the device settings. There you can find an item responsible for backup and reset. You need to select reset to original settings there and confirm your decision. The process can last a very long time - from 20 minutes.

    If you cannot reset the device in safe mode, you need to use recovery mode. To do this, you need to hold down the power button and turn off the device. Then, depending on the device model, you need to press a combination of buttons, which can be found in the instructions or on the Internet. Recovery mode will start. Using the volume buttons, you need to select the option to reset the device and press the power button to confirm. All you have to do is wait for the reset process, which will take a few minutes.

    Once the settings are reset, the device can be set up by creating a new account or logging into an existing one. In the second case, access to the purchased content will be regained.

    Yes, you heard it right - Android devices have a safe mode. Why is it needed? For example, you installed an application and after it your smartphone or tablet stopped working correctly. In safe mode, you can not only make sure that the problem is in the application (when the device boots, third-party applications do not launch), but also remove it.

    How to enter safe mode on Android?

    First, we will show an example on stock Android (version 4.4).

    Press the device's on/off button until a menu appears on the screen, as shown in the screenshot.

    Tap on “Power off” (or “Shutdown”) and hold your finger in this position for about one second, after which a sign will appear on the screen symbolizing the transition to safe mode. In our case, there is no sign; a message immediately appears stating that the device will be rebooted. Click OK.

    The device will reboot and boot into safe mode, as indicated by the corresponding message at the bottom of the screen. By the way, you may notice how much faster your device works.

    As for devices with other launchers, the process of enabling safe mode may be slightly different, but this is rare. The following is an example based on Samsung Galaxy.

    Turn off the device in the standard way. We launch it and as soon as the Samsung icon appears on the screen, press the volume down button (down) and hold it until the desktop loads.

    As in the first case, in the lower left corner you will see the inscription “Safe Mode”.

    How to remove safe mode on Android?

    To exit safe mode, press the power button, and then in the menu that appears on the screen, tap “Restart”. If there is no such item, then click “Turn off power”.

    After the gadget turns off, turn it on and do nothing. In other words, you just need to reboot your device. However, please note that in some cases this does not work.

    If we talk about the same Samsung Galaxy, you need to turn off the smartphone in the standard way - by pressing the “Shutdown” button.

    The device will be turned off. Then turn it on and as soon as the Samsung logo appears, press the volume up key and hold until the desktop loads.

    As you can see, the “Safe Mode” inscription has disappeared.

    There is another option. In the menu, which you can see in the curtain, there is a Tap turn off Safe Mode (Open) button. Click on it.

    Then confirm the action by clicking on the button with the same name.

    The device will reboot normally.

    How else can you turn off safe mode?

    • If the method described above does not help, you can try turning on the gadget with the Power button or the volume up/down button pressed. You just need to be careful, because in this case you can start a different mode of operation of the device. Press the buttons one by one when turning on the device.
    • The following may also help: turn off the device, then remove the battery, if it is replaceable, and wait at least 1-2 minutes, then insert the battery and simply turn on your device.

    Experienced users of Windows operating systems know about the existence of a safe mode on their PC, but few even realize that it exists in the Android mobile OS. Therefore, for some users, switching to normal mode becomes a difficult task. For more information about why you need safe mode on Android and how to turn it off, read our article.

    What is safe mode in the Android mobile operating system?

    Safe mode in Android is a special boot mode that allows you to start the system only with system applications. This way you can restore a phone that freezes or slows down due to an overabundance of applications, and remove unnecessary ones. However, after the operations performed, not everyone manages to return to normal mode.

    How to disable safe mode on Android?

    Removing the Battery

    To remove safe mode, you need to turn off the device and remove the battery for at least 30 seconds. Then insert the battery into place and turn on the gadget. Android should start working normally and all apps and data will be saved.

    First of all, turn off the device

    The only disadvantage of this solution is that not all devices allow you to remove the battery. Therefore, this method is not applicable to all Androids; for such cases, there are several other methods for exiting safe mode.

    Using the Home button

    This method is as simple as the previous one. All you need to do is:


    Some devices may not have a reboot function; in such cases, you just need to turn off and turn on the gadget.

    Pressing the volume up/down button

    Attention! This method resets the device to factory settings, all saved data will be lost.

    • Files can be copied to a computer by connecting the device to it. Or put everything you need into cloud storage. For example, Google Drive.
    • All applications can then be re-downloaded. If you purchased them, the payment will be saved and you will not have to spend the money a second time.
    • Your contacts will not be affected, but to be more sure, you can export them to a file and save them on your computer.

    What you need to do to reset your phone:


    Video: how to turn off safe mode on an Android tablet/phone?

    Safe Mode is an integral part of the Android operating system, which helps in case of system overload. There are several ways to get out of it. If you follow the instructions and carry out all the suggested actions step by step, then there will be no problems with data loss or system failures.

    Immediately after purchasing a device running on the Android platform, to the delight of the user, it brings a lot of positive emotions with its stability and performance. But suddenly, the consumption of system resources begins to increase, the system began to crash and slow down, and, in the end, notifies its owner that the device is now operating in safe mode. What does this mean? And how to disable safe mode on Android?

    In order to understand everything and take control of the situation, you still need to, as they say, “dance from the stove.” So.

    The Android operating system is designed in such a way that in the event of any critical error, in order to protect the device, it automatically goes into safe mode. That is, a certain part of the functions is disabled, only pre-installed applications begin to work, and programs installed by the user not only stop working, but even their icons disappear from the desktop.

    What can cause failures?

    Logically, this is the main question. After all, if you immediately find out how to remove safe mode on Android and perform this action, the cause of the problem will remain, which can lead to the same failures, or even more serious consequences. So what could cause the device to automatically enter safe mode?

    • Incorrect user settings
    • Installing third-party programs from untrustworthy sources
    • A virus was downloaded under the guise of an application
    • Any system error

    All these problems can be solved in safe mode. And even if your device does not automatically switch to this mode, if all sorts of “braking” and “freezing” occur, the speed of the gadget slows down, applications do not work correctly, the sensor reacts unstable, etc., it makes sense to find out how to enter the safe mode. mode on Android and perform a number of specific actions.

    How to enable safe mode on Android

    When you enable safe mode, the Android device will boot with default settings, i.e. only those programs that were installed by the manufacturer. This does not mean that your settings will disappear completely - when you exit this mode, they will all return to their place. What to do:

    Press and hold the hardware power button located on the side panel until the shutdown menu appears. Select “Turn off power”, press and hold for a couple of seconds:

    In the window that opens, you will be prompted to switch to safe mode, we agree (the “OK” button):

    After these steps, the device will reboot, and the following message will appear on the desktop in the lower left corner:

    I must say that this is the most common method, but on some models it may look different. Therefore, if this method does not produce results on your device, you need to look at the algorithm of actions on the official website of the manufacturer of your particular Android model.

    Being in safe mode (and it doesn’t matter whether you entered it yourself, or how the system worked), you can see how your device could work without being burdened with all sorts of launchers, background applications, and other “improvements” with which you personally overloaded your device. "Andryukha."

    And if third-party programs do not start in safe mode, then you can easily remove them. To do this, go along the path “Settings” -> “Applications” -> “All applications”. In this section, all programs will be visible, including those that you installed yourself. Look through them, remove unnecessary or recently installed ones, because there is a high probability that they were the reason that Android automatically switched to safe mode:

    How to remove safe mode on Android

    First way: After you have made the necessary changes that we talked about above, you can turn off Safe Mode. Usually the simplest procedure is sufficient, i.e. Reboot your smartphone (hold the power button until the reboot menu appears):

    Second way: If you are unable to exit safe mode in this way, you can remove the battery, wait about a minute, return it to its place and turn on the phone again.

    Third way: It’s also worth checking the notification panel. In many versions of Android, a notification is sent, after clicking on which, the device will reboot and the system will automatically exit safe mode.

    Fourth method: If this does not help, then we do this: we reboot the device, but while turning it on, press the “Home” button and hold it until the system is fully loaded.

    Fifth method: Well, one more option (if all the previous ones fail): reboot the device, and when turning it on, press the volume rocker up (or down) and hold it until the gadget starts up completely.

    Sixth method: Unlikely, but if all else fails, you will have to perform a factory reset. Just remember to back up your data first.

    Have you ever experienced the situation described in this article? Please share with our readers how you managed to resolve it. Good luck!

    Safe mode on YouTube is designed to protect children from inappropriate content, which, due to its content, can cause any harm. The developers are trying to improve this option so that nothing unnecessary gets through the filter. But what should adults do if they want to view previously hidden records? Simply disable Safe Mode. It is exactly how to do this that will be discussed in this article.

    There are two options for enabling safe mode on YouTube. The first implies that there is no ban on turning it off. In this case, disabling it is quite simple. And the second, on the contrary, implies that the ban has been imposed. Then a number of problems arise, which will be discussed in detail later in the text.

    Method 1: Without a shutdown ban

    If, when you turned on safe mode, you did not prohibit disabling it, then in order to change the value of the option from “on.” to "off", you need:


    That's all. Safe Mode is now disabled. You can notice this by the comments under the videos, because now they are displayed. Previously hidden videos also appeared. Now you can view absolutely all content that has ever been added to YouTube.

    Method 2: When disabled

    And now it’s time to figure out how to disable safe mode on YouTube when the ban on disabling it is enabled.


    Well, after pressing the button "Login" Safe Mode will be disabled and you will be able to view content that was hidden up until that point.

    Disabling Safe Mode on Mobile Devices

    It is also worth paying attention to mobile devices, since according to statistics compiled directly by Google, 60% of users access YouTube from smartphones and tablets. It’s worth noting right away that the example will use the official YouTube application from Google, and the instructions will only apply to it. To disable this mode on a mobile device through a regular browser, use the instructions described above (method 1 and method 2).

    After this, all videos and comments will be available to you. That's it, in just four steps, you disable Safe Mode.

    Conclusion

    As you can see, to disable YouTube safe mode, both from a computer, through any browser, and from a phone, using a special application from Google, you don’t need to know much. In any case, in three to four steps you will be able to enable hidden content and enjoy viewing it. However, do not forget to turn it on when your child sits down at the computer or picks up a mobile device in order to protect his fragile psyche from unwanted content.

    Read more: