Highscreen does not see the computer. Official usb driver for Highscreen mobile phones Download free driver for Highscreen thor black, Alpha R, omega prime s mini via a special DATA cable
Install optional products - DriverDoc (Solvusoft) | | | |
This page contains information about installing the latest Highscreen driver downloads using the Highscreen Driver Update Tool.
Highscreen drivers are small programs that enable your Highscreen hardware to communicate with your operating system software. Keeping Highscreen software updated prevents crashes and maximizes hardware and system performance. Using outdated or corrupt Highscreen drivers can cause system errors, crashes, and cause your hardware or computer to fail. Moreover, installing the wrong Highscreen drivers can make these problems worse.
Advice: If you are not sure how to update Highscreen device drivers manually, we recommend downloading the Highscreen Driver Utility. This tool will automatically download and update the correct Highscreen driver versions, preventing you from installing the wrong Highscreen drivers.
About the author: Jay Geater is President and Chief Executive Officer of Solvusoft Corporation, a global software company focused on innovative service offerings. He has a lifelong passion for computers and loves everything related to computers, software and new technology.
On this page, we have managed to share the official usb driver for Highscreen Easy S Device. If in case you were already searching for the usb driver of this device, then this page will help you out.
There are 3 usb drivers available for your device. Two of them can be used to flash the stock firmware on your Mediatek Device and Last is for normal connecting the device to the computer.
How to install driver manually
Step 1: Download and extract the driver on your computer.
Step 2: Open Device Manager and Click on Add the Legacy Hardware Menu.
Step 3: Click Next.
Step 4: Select Install the hardware that I manually Select from a list.
Step 5: Locate the extracted driver manually on your computer.
Step 6: Click Add.
Step 7: Your Driver will be installed and listed in the Device Manager.
Important Notes :
[*] Driver Signature Error: If you got Driver Signature Error While installing the Driver then See this Video to fix this problem.
[*] If you are trying to flash stock firmware on your device then download CDC and VCOM Driver Only. ADB Driver will not work for flashing the stock firmware.
[*] Highscreen Easy S Stock Firmware: You can download Highscreen Easy S Stock Firmware from .
The connection via cable is very convenient for the user - you can quickly upload your photos and upload new ones. And what disappointment and frustration we feel when we connect USB and don’t see any folders. How to resolve the situation? There are several options for the development of events, we act in stages.
Restart your computer and Highscreen. Often manipulation helps solve inconveniences, especially if the interaction was previously performed correctly.
Check the cord - is it intact? Even original wires are prone to failure during active use. But the Chinese refuse without good reason, they simply stop working or perform an endless cycle of connecting and disconnecting.
Inspect the port. It may also be faulty. It's easy to check - use another one.
Another common case is a broken socket (the connector into which the wires are inserted). This usually happens in two cases: careless use (constant sharp “pulling out” of the cords) or water ingress. In this case, urgent repairs are required, because it is unlikely that the product will be charged. Contact the service center, troubleshooting is quick and inexpensive.
You can also try an interesting method - remove the battery for a while, after turning off the smartphone. In some cases this serves as a solution.
These are problems that can be classified as mechanical. There are a number of software that we will look at. Therefore, if the above does not help, do not despair, there is a chance to fix everything.
First we go to study the settings. Find the "Memory" item. Open the properties - most likely they are all hidden under three dots nearby. If you have modem mode, turn it off and select media.
The computer must have the function of automatically detecting objects and searching for updates as needed - Windows Update - enabled.
When you connect to your laptop for the first time, an “unidentified device” pop-up window will appear. By accidentally clicking on an unwanted area of the screen, you can block the media. Be sure to unlock, otherwise the content will not be shown!
Lack of drivers is the main problem when connecting to a PC. Moreover, both the USB and the phone itself can fail. If you still have the disk that came with your motherboard, run it and follow the onscreen instructions. If not, find your motherboard ID and look for drivers on the Internet. This will fix the problem, and you can determine the software for Highscreen in the “Device Manager” section. If there is an exclamation mark with the name, reinstall the software from the media or from the network.
Viruses block important functions and can prevent correct identification by technology. Download antivirus.
Non-standard firmware causes a lot of trouble for owners. Use preset data.
Try resetting to factory settings. Before doing this, it is advisable to make a backup using a popular application. Please remember that any manual settings will be removed. The files will remain on the SD card.