How to correct the time on a smartphone. The exact time in your mobile. Video: How to set time and date on Android

Setting date and time on Android. It seemed that it might be easier than just changing the date and time in Android, but unfortunately, problems can arise here too. In this article you will learn everything you need to know about accurately setting the date and time!

Why do you need exact time and date?

Did you know that if the wrong date and time is set in your Android, it can greatly affect the operation of the system? For example, data synchronization will not work correctly, GPS will spend a lot of time connecting to satellites, messenger applications may send data intermittently, and many sites will ask for certificates or indicate that they are outdated, using the Internet will turn into torture! To prevent this from happening, you must always set the exact time and date.

Instructions on how to change the date and time in Android?

To do this, you will need to go to the Android Settings menu:

If you often have problems with an incorrect date or time, then pay attention to two parameters " Network date and time" And " Network time zone", if they are enabled, then disable them:

You will then be able to personally change the time and date.

Changing the date:

Changing the system time:

Also don't forget to set " Time zone", since in the future this will help avoid problems with changing the clock to summer and winter time:

That's it! If you have Root rights installed on Android, then you can make your life easier by performing automatic time synchronization.

How to change the date in Android or reset the time? Such a simple action can sometimes be quite difficult, especially if you are not yet comfortable with this operating system or are experiencing any glitches when you try to make changes.

Most devices support automatic receipt of data from a mobile operator

Let's find out how to change these parameters on Android and what to do if the gadget does not want to accept new time and date values.

Changing the time and date on Android

Changing the Android time, regardless of what version of the system you have and what you are using - a smartphone or tablet, happens this way:

Difficulties when changing parameters

Sometimes users do not know how to change the date in Android when it comes to devices that use a SIM card - the system sometimes refuses to make changes. This is explained by the fact that the mobile operator’s time zone is different from the one set by the manufacturer of the Android tablet or phone, which causes a conflict.

This problem is solved in the following way:

In general, Android most often sets the correct time and day, month and year parameters when connecting to the network, so it’s still worth using automatic detection. But, if you encounter errors, use manual input.

If all the above tips fail, more advanced users can try this:

• Get root rights on your tablet or smartphone using special applications, of which there are quite a few on the Internet.
• Download the ClockModRecovery utility, which will set the correct time on your gadget.

Now you know how to set the time or date on Android, you can do it quickly and independently.

Setting the date and time in the Android operating system is a simple thing, but in some cases the user may have difficulties with it. They can be associated both with ignorance of certain things, and with failures of the operating system itself.

How to Set Date and Time on Android

The correct date and time not only help the user to be more punctual - few people would want to miss the bus because the time was set incorrectly - they are also important for the operation of some applications, which, if the data is incorrect, can begin to crash and work with errors. Therefore, it is strictly recommended to set the correct date and time on the device.

The process of setting the date and time in different versions of Android is approximately the same: except that in new devices the system asks you to set up the data immediately, even before you start using applications. In addition, the names of menu items responsible for time and date may differ slightly from each other in different OS versions.

After these simple manipulations, the date and time should change.

Video: setting time and date

If problems arise

It happens that when setting the date and time, errors occur: changes are not applied, the newly set time and date are reset, or even thrown out of “Settings” with an error. There can be many reasons, but the most common ones are:

• you have auto-time synchronization enabled, and therefore attempts to manually change will lead to nothing. To disable auto-sync, you need to uncheck “Use network date and time” in the date and time settings;
• the problem is related to a single system failure and should stop after a factory reset or reboot;
• defective device firmware - in this case, if you are not an experienced user, it would be best to contact a technician at a service center, since if you try to reflash the device yourself, there is a high risk of damaging it;
• there was a conflict between the time zones of the phone and the SIM card (most often this happens with the Tele2 operator).

To fix the problem with time zone and SIM card conflict, follow these steps:

Auto date and time synchronization

If you don't want to set the time and date manually, you can use Android's built-in feature to automatically synchronize time with the network. Or, if maximum accuracy is important, its improved version, the implementation of which will require root rights.

Normal auto-sync

To synchronize the date and time with network data, you need to tick just one item located in the “Date and Time” settings menu. It is usually called “Use network date and time”, but the options “Automatic date and time”, “Synchronize with network” and other similar options are also possible.

After checking the box next to this item, the date and time on the phone or tablet are synchronized with the network data and will henceforth be determined automatically. While this feature is enabled, you cannot manually set the date and time.

When the “Use network date and time” checkbox is checked, the system itself checks the date and time with the network

"Smart" synchronization

Standard synchronization is not very accurate and operates with an average error of 500 milliseconds (that's about half a second). This is due to the fact that when it was created, old and rather slow data transfer protocols were used. As a result, information about the current time simply does not have time to arrive on time and is slightly delayed. This leads to an error that is corrected by numerous applications for “advanced” time synchronization.

To work properly, applications need to interfere with Android settings, but by default they do not have this right. Therefore, in order to carry out smart synchronization, you need to have superuser rights, or root rights, on your device. However, those applications that are the most advanced, with a sin in half, but do without them.

The algorithm for obtaining root access is unique for each phone model, of which there are currently hundreds. There is no general method that would allow you to gain superuser rights on any device: even the most popular applications for “hacking” root rights operate with a limited set of models, and whether a particular application is suitable for you is unknown. To obtain root access on a specific device, you need to read the technical documentation on rooting it on a specialized resource.

There are several smart sync apps, and they are all similar to each other. Let's look at working with them using the ClockSync application as an example.

ClockSync can be downloaded from the official page on Google Play. However, this application is one of the most resource-intensive and multifunctional: for example, it allows you to change the server with which the time is checked. If you are not such an advanced user, then you can use some simpler analogue: for example, Smart Time Sync.

Setting the time zone

You can change the time zone defined on the device in the same settings item, “Date and time”. The “Time Zone” line allows you to change the default zone.

The time zone, just like the date and time, has an auto-synchronization option. You can turn it on if you're unsure about your own time zones, but this setting can sometimes glitch in older versions of Android, so it's recommended to set it manually there.

You can find out which time zone is used in your region using the media at your place of residence, including the Internet. The Moscow belt is GMT+3; in St. Petersburg and central Russia it is also mainly used. In general, time zones from +3 to +12 are used in Russia.

To select a time zone, you need to click on the “Time Zone” button and select from a huge list the one that is used in your region. After this, the time will be set in accordance with the selected zone.

Time zone gets confused

The time zone can go wrong in several cases: either auto-synchronization is not working correctly (in this case, you need to enable manual zone selection), or the wrong region is set in the settings of your phone or tablet.

In addition, the cause of the failure may be an error in the databases. In this case, only one of the applications for “smart” synchronization, which has already been mentioned, will help; the servers they use usually detect the time zone without errors. However, root access is required to use such applications. In the settings of such applications there is an “Auto-sync” item, which can only be turned on with root. If automatic time zone synchronization is enabled, the application will also determine the time zone automatically - and do so more accurately than the system menu.

Video: “fixing” the time zone through the application

Setting the time and date on Android is simple - if the phone does not require maximum correctness of the result. If you want your watch to be extremely accurate, you will have to try. In any case, correctly determining the time is a valuable feature of the phone, which is extremely important for its normal operation.

Let's imagine that you have just received a brand new smartphone based on the Android operating system, but the date and time on it do not match the real ones. This is where the question arises - how to install or change this data?

It should be noted that by default, the date and time are synchronized with the server automatically as soon as you connect to the Internet. Therefore, we recommend that you turn on either Wi-Fi or mobile Internet, after which the data will be synchronized and you will not need to configure anything.

If after connecting, automatic synchronization does not work or you are unable to connect to the network, we will change the data manually. To do this, go to the settings of your smartphone by clicking on the icon of the same name on the desktop.

But on Xiaomi and MIUI firmware you need to look for it in the “System and devices” - “Advanced settings” section.

We go to the section, here by default the “Automatic detection of date and time” should be checked. In this case, the data is synchronized with the server.

If you want to specify other data, uncheck the “Automatic detection of date and time” item and then the “Set date” and “Set time” items will become active.

By clicking on “Set date”, enter the required data and click OK.

You repeat the same thing over time.

By the way, if you have problems with automatic data detection, it may be due to the wrong time zone (the clock may be an hour or more behind or too fast). Click on the “Select time zone” line.

Select the required time zone.

Sometimes even the simplest operations cause minor difficulties for users. For example, novice owners of Android devices often wonder how to change the date in Android? The thing is that this does not require any special knowledge. And if you have ever held a mobile phone in your hands, you can always set the time and date in your smartphone. Let's take a look at how date and time are configured on mobile devices.

How to change the date in Android manually? We assure you that for this you will not need superuser rights, mysterious commands or access to the engineering menu. Android is a very simple operating system, so changing the date is as simple as possible here - just go to the settings. Manually setting the date and time is necessary on devices not connected to the network, since there is simply no other synchronization here.

In order to change the date on Android, and at the same time adjust the time, you need to visit the system settings. This is done in two ways:

• Slide the top curtain and click on the gear symbol;
• Go to the main menu, select the “Settings” item (also in the form of a gear symbol).

At the bottom of the list we will see the “Date and Time” item - you simply cannot miss it.

Please note that in some Android devices the settings menu is modified and divided into several tabs - the item for setting the date and time in such devices is located in the “Options” tab. In some smartphones, the settings shortcut is displayed directly on the desktop.

Having entered this point, we will see a lot of interesting things. If your smartphone or tablet does not have a SIM card installed, automatic synchronization will not be possible. In order to set the correct time and the correct date, you must uncheck the “Auto-detect time” checkbox. After this, the options for manually setting the time and current date will become available. Next, click on the “Set date” item, select the current date, current month and current year, click OK - now the date is set correctly.

At the next stage we set the time. To do this, you need to tap on the “Set time” item - set the hours and minutes, click on the OK button. Next, you need to uncheck “Auto-detect time zone” and select your time zone manually. If the time is wrong, correct it.

The problem with time zones often causes a lot of inconvenience to domestic users - in our country they either cancel the transition to winter/summer time or play with the number of time zones. As a result, smartphones and computers have problems setting the correct time.

Next, you can select the time display format - it can be 12-hour or 24-hour formats. By checking the box, you will select a 24-hour display format, and by unchecking the box you will switch to a 12-hour format. Below we select the date display format - in the Android settings there are several ways to display the current date, differing in the location of the year, month and day.

If you don’t know what to choose, stop at the “Local” option; this format implies displaying the date in the following order - day, month, year (format accepted in Russia).

Automatic date and time setting

How to change the date in Android automatically? This operation implies that information about the current date will be taken from the mobile network - the correct time and correct date are constantly broadcast there. Automatic setup will only work if a SIM card is installed in the device. As soon as the smartphone or tablet registers with the cellular network, the necessary data will be read from it.

To enable automatic date setting, you must check the “Auto detect time” checkbox - in this case, the “Set date” and “Set time” items will become unavailable. If the network does not set the time zone correctly (or your device does not know about the problems with time zones and summer/winter time in our country), uncheck the “Auto-detect time zone” checkbox and select it yourself.

The correct time zone for Moscow time is Moscow time zone GMT +03:00. Select the appropriate value for your region from the drop-down list.

We set the most accurate time and exact date

Now you know how to change the date in Android - to do this, you need to visit the system settings and use the “Date and Time” item. Data installation is carried out in Android in manual or automatic modes. If you want to get the most accurate time, you should select automatic detection.

But what if the mobile network accuracy is not enough or your device cannot communicate with mobile networks? In order to get accurate data about the current time and current date, you need to use third-party applications. The most powerful application for automatic time synchronization is ClockSync from developer Sergey Baranov. Despite its more than modest size, the utility has decent functionality.

Here we will find:

• Automatic time setting with root rights;
• Automatic time setting without root rights;
• High precision mode;
• Selecting a server for time synchronization;
• Setting the request interval exactly in time;
• Battery saving mode;
• Detailed statistics;
• Time zone database (will be useful for older smartphones);
• Automatic time zone detection;
• Function for updating system data about time zones.

Install the application and get the most accurate time on your watch. Also, you will not need to worry about setting the date if for some reason it goes wrong.

The function of updating system data on time zones will be useful to many Russian users whose smartphones and tablets do not know about the absence of a summer/winter time change and about changes in time zones. However, this function requires root rights to work.