How to decorate a sheet in Word with a frame. Download and insert beautiful frames into a Word document. Free collection of frames for text design in Word, with installation instructions

How to make text appear in a frame in Word?

Sometimes we want to highlight some parts of the text in a special way and then we start looking on the Internet for information on how, for example, to highlight a passage with a certain color, how to change the font or add a frame.

Today we will talk about the latter.

There are quite a few ways to do this. Most of them are relevant for all versions Microsoft Word and they are all done as simply as possible.

IN in this case You don’t need to know a lot about the design of this program or even be a more or less advanced user, you just need to follow the instructions given below.

Method number 1. Standard

In short, this method is to simply select the text, find it in one of the program tabs on top panel paragraph " Borders and Shading» and use it to make a frame around the selected fragment.

In more detail, it all looks like this:

We select a certain piece of text by left-clicking at the beginning and, without releasing it, at the end.
After that, go to the “Page Layout” tab in Word 2010 and 2007, to the “Design” tab in Word 2013 and to the “Format” menu in Word 2003.
Click on the “Page Borders” item in Word 2007, 2010 and 2013 and on the “Borders and Shading” item in Word 2003.

A window that is the same for all versions will open “ Borders and Shading"(only the design of the window itself will differ).

Go to the tab " Border».

Important: When this window opens, the “Page” tab automatically opens. They have the same interface, but the first one will perform certain actions for a selected piece of text, and the second one will perform certain actions for the entire page.

IN open tab“Border” select the “frame” type.

Click "OK" at the bottom of the window - and you're done.

This is interesting: Try experimenting with the type of frame borders. There is a special section for this, which is called “Type”.

As you can see, there you can select a frame with borders in the form of a dot-dash, dash-dash, and so on. Also in this window you can select the color of the lines, their width and many other parameters.

And the frame itself can be made voluminous, with a shadow, colorless, or made special in other ways.

This window will definitely be useful to people who often work with Word.

Method No. 2. Using tables

This method also works in absolutely everyone. Microsoft versions Word does not cause any particular difficulties.

It consists in first creating a table with one cell and one column, writing some text in it, and then simply “adjusting” the size of the table to the size of the text.

In more detail, in Microsoft Word 2007, 2010 and 2013 all this is done as follows:

Go to the “Insert” tab on the top panel of the program;
Click the “Table” button;
We aim at the grid so that only one square is selected. Click on it.

The 1×1 table we need will appear on the screen.
Hover the mouse cursor over it, left-click and enter required text.
We move the mouse cursor over the boundaries of this table, we see that it takes the form of a line with arrows on both sides. We move them in such a way as to reduce the size of the table.

In Microsoft Word 2003 the same thing happens like this:

On the top panel, select the “Table” menu;
In the drop-down list, move the cursor to the “Insert” item, then again to “Table”
A window will open where you need to specify “1” next to the words “Number of columns” and “Number of rows”;
Next steps exactly the same - click on the table, insert the desired text there and change its size using the mouse cursor.

In principle, you can create tables in this way in later versions of Microsoft Word, but there is already a more convenient method, which was described above.

Method No. 3. Using shapes

As you know, Microsoft Word has the ability to insert all kinds of rectangles, circles, cones, and the like into a document. In all versions the sets of figures are identical.

The essence of the method is to create a regular square and add text to it.

In fact, we are creating the same 1x1 table, only in the form of a picture. IN Microsoft Word 2007, 2010 and 2013 This method involves the following steps:

Go to the “Insert” tab;
Select the item “Shapes”;
Select a regular rectangle. While drawing a rectangle, the user can immediately edit its dimensions;
When the rectangle is placed on the page, right-click on the rectangle and select “Insert text”;
We write the required text.

IN Microsoft Word 2003 this whole process looks a little different. In this program, the list of shapes is simply located in a different place.

But the figures themselves, as mentioned above, are exactly the same as in later versions. There, to add a rectangle, you need to do the following:

On the bottom panel, hover your mouse over the “AutoShapes” item.
In the drop-down menu, select “Basic Shapes”.
In the list, just click on the rectangle (number 1 in the figure below).
Further work with the figure occurs in exactly the same way as in later versions of Word– expand or narrow, right-click, select “Add text” and insert the desired inscription.

There is another way which is to simply click on the rectangle on the bottom panel and continue working with it in the same way.

This option is indicated by number 2 in the figure below.

As you can see, all these methods are extremely simple and should not cause any particular difficulties. To find the menu items you need, you don’t need to spend a long time walking through Word tabs and looking for what you need.

But the result will be very impressive.

Method number 4. Caption Tool

Microsoft Word 2007, 2010, and 2013 have a Text Box tool. It is located in the "Insert" tab.

To make text in a frame using such a tool, you must perform the following steps:

Open the “Insert” tab;
Click on the “Inscription” button.
Select one of the inscription styles.

As you can see, the very first style is a regular frame. Click on it, paste the text and click on empty space pages.

After this, the frame can be edited traditional way– resize, move, and so on.

As you can see, in this menu there are other options for inserting text - for example, there are very effective inscription in the form of a side panel. Word 2003 also has such a tool.

The whole process of using it looks like this:

Click on the “Insert” menu;
In it, select the “Inscription” item.

In any case, using this tool is very convenient.

Do you need the largest collection of frames in RuNet? Then you have come to the right place!

There are frames for text design. They are also used for framing paintings, photos, and what is especially interesting for us, electronic documents Word. Agree, dry text done in black and white is not very pleasing to the eye. Of course, if we are talking about business documentation, then you need to adhere to the appropriate style. There's not much to experiment with here. But even here you can create a stylish page frame.

Please note . At the end of the article, sets of frames available for download are presented to you -.

It's another matter if we create a letter, a children's book, or any other document of an entertaining nature. This is where we can safely use our imagination and create a beautiful and vibrant document design, thanks to the use of all kinds of frame variations available in Word.

. Do not forget that the finished document must be designed with the highest possible quality. Don't forget to put numbers for each page (see).

If you need to frame a piece of text in any document that is published on your site, you can use HTML tools for this (see).

Adding frames in different versions of the editor

This section is suitable for those who want to understand how to make a frame in Word. The process is quite similar in all editor variants, but there are still slight differences. Let's start with the oldest version.

Frames in Word 2003

Open the document into which you want to insert a border. Next you need to do the following:

Frames in word 2007

Frames in Word 2010

Here the process is similar to that discussed above. Therefore, let's try to expand the editor's standard set a little. There is a large set of frames for Word: pictures, all kinds of lines, and even frames in the form of GOST frames. We invite you to download three sets (see):

Some interesting pictures for frames
The archives contain a pretty good set of frames. Launch, see which ones suit you, and use them.
Please note. If you need additional information to be provided below the frame in your document, you can add it using footnotes (see)

A short instructional video:
Update. Added a set of patterned frames. Jun 5, 2015
Conclusion
Using frames will allow you to format the document, add the necessary technical fields, and make it more original and readable.
Can be used in any Word document. This way, you can make the desired orientation for the entire document, or a separate sheet.
Allows you to create convenient navigation within the document. Use them to add a table of contents.

Why look for information on other sites if everything is collected here?

If there is a need to make a frame in Word, most users follow the most obvious path - they create a huge table that spans the entire page, inside which they place the text. But, despite its simplicity, this method of creating a frame is not very convenient. Especially if there are other tables in the text.

Instead, it's better to use a tool called Page Borders. With its help, you can make a frame in Word for all pages of a document, only for individual pages, or even for individual paragraphs of text. You can find out how this is done in this article.

How to make a frame in Word 2007 and 2010

If you are using Word 2007 and 2010, then to make a frame you need to open the “Page Layout” tab and click on the “Page Borders” button. If you have Word 2016, then the “Page Borders” button must be found on the “Design” tab.

The Borders and Shading window will then appear. Here you need to select a frame and click on the “Ok” button. After this, each page of the document will be framed.

If necessary, you can make the frame the way you need. In the Borders and Shading window, you can select the border type, color, and thickness.

If you only need to add a border on certain pages, you can split Word document into several sections and then apply the frame only to those pages that are needed.

How to Make a Border Around Text in Word

If you don't need to make a border around the entire page, you can make one around a paragraph of text you select. For this Place the cursor on the paragraph around which you want to make a frame, click on the “Page Borders” button and go to the “Border” tab.

A quick way to create a frame around text

There is also a faster way to make a frame around text in Word. There is a button on the Home tab that users usually don't notice.

This button allows you to quickly create frames around text. To do this, just place the cursor on the desired paragraph of text, click on this button and select the appropriate frame.

How to make a frame in Word 2013 and 2016

If you have Word 2013 and 2016, then the frame is added in exactly the same way as described above. The only exception is the “Page Borders” button will not be on the “Page Layout” tab, but on the “Design” tab.

Otherwise, the process of creating a frame is exactly the same as in Word 2007 and 2010.

The Word text editor is so flexible that, if desired, you can create in it, and, and advertising brochure, and , and even beautiful. And with the help of the product and drawing, you can make greeting cards and simple collages. If you have the desire and imagination, you can create business cards, certificates, and even colorful electronic ones in the same Word. Many people use Word only as a text editor and nothing more, but just add a frame and the same simple text document will become much more interesting and attractive.

I will show you how to add a frame to a document with an example. text editor Microsoft Word 2010. For those who still have the old Word version 2003 installed on their computer, you can read this. And starting from version 2007, you can follow this article.

Go to the tab Page layout, and select the tool called Page Borders.

If you want to make a frame only for a specific paragraph or block of text, then it is better to go to the tab Border.

If you need a frame for the entire sheet or even a document, then stay on the tab Page. The process of creating a frame for a specific paragraph, block, or entire page is exactly the same.

Choose Type lines of the future frame, Color, Width and how to apply it (to the entire sheet or just to a paragraph).

In the field where a sample of your future frame is shown, there are squares on the left and bottom, by clicking on which you can add or remove side, top and bottom borders.

On the tab Page there is another interesting function Drawing. If you click on the small black arrow on the side, a drop-down list will appear with small drawings of Christmas trees, hearts, apples, etc. Choose a drawing and see what you can come up with.

There is also an interesting button at the bottom left Horizontal line, with which you can in the right place document to make a beautiful dividing line. The main thing before creating it is to place the cursor in the place where it should be.

Well, we looked at another tool for our creativity. I hope that the framework will be useful to you more than once in your work.

??? ?????? ???????????? ???????? ????? ?? ?????????? ??????????, ??????? ????????? ??????? ?? ????????.

?????? ?? ????? ?? ? ????????? ???????? ???????????, ??????? ????? ????????? ??????, ?? ???? ??????? ????? ? ???????? ?? ??? ??????.

45 ?????? ?? 1 ???????????? ????.

??? ?????????? ?????? ?????? ?????????? ?? ????? ?????. > http://like-money.ru/<

?????? ???????????? ??????? ???????? ????????? ? ??????? ?????????? ?????.

Shawntub wrote
in the article

Even you can play background music from the same drive with the slideshow. Most of the “playing” routines could easily have the same goals as to any gym enthusiast have. This depends if you have any prior job experiences and the type of job seeker that you are. All the above-mentioned equipments are mainly used for splitting the water into oxygen and hydrogen. All the commodities are in the best quality and the most efficient equipments available in the market. The gas and the petroleum industries all over the world mainly use all the equipment mentioned above. 2. Work on developing 1-3 skills over a 3-6 month period. Tested to be over 96.5% "Solar Reflective". When Financial Planning Assessment in Gold Coast reduces the probability of investment and helps you to manage your income. Passive income is the golden word in which most home-based businesses sell the dream of ultimate prosperity.

Visit site: http://v.ht/yKLc