How to install Windows from a disk. A quick way to install Windows without a disk or flash drive

In this article you will learn how to properly install Windows 7 on your computer or laptop. In addition, I will tell you how to prepare for this process so that everything goes without negative consequences. Follow all the steps, be careful and you will succeed.

Before you properly install Windows 7, you need to make sure that everything is ready for this. Four requirements must be met:

1. You must have a reliable installation disk with Windows 7 or a bootable USB flash drive with it.
2. Make sure that on local disk on which the system will be installed, no important files that you need. This drive will be formatted and all data will be deleted.
3. Make sure that necessary drivers devices at your disposal, or before installing Windows 7,.
4. Make sure you have installation files for all the programs you need. They will need to be installed after successful installation of the system.

How to install Windows 7 correctly

The installation is divided into three stages:

• BIOS setup;
• Hard disk preparation and installation;
• Completing Windows installation.

Let's look at each of these stages.

BIOS setup

Before you install Windows 7 correctly, you need to understand that a disk or flash drive with the distribution kit is not enough. You also need to configure the computer to boot from this disk (or from a flash drive), and not from the hard drive. By default, most computers are configured to boot from the hard drive.

There are many BIOS versions, and setting the boot order of devices is different everywhere. You can find out how popular ones are configured BIOS version for loading from external media.

Start installation

Finally got around to installing Windows. When your BIOS is set to boot from required device, connect this same device (that is, a disk or flash drive) and restart the computer. Booting from removable media should begin.

If you install original Windows, then before loading the message “Press any key to boot from CD...” will appear. While it is lit, you must press any key to start the installation. If you don't have time, it will start normal download from the hard drive. If you are installing any Windows assembly, then such an inscription may not appear. Instead, there may be a menu where you need to select the installation of Windows 7.

The installation begins. The first step is to select a variety of language options and then click “Next”.

Select language

After this a window appears. Click Install.

Start installation

Before you properly install Windows 7, you need to choose which version you will install. This is done on this step. You need to select the desired OS version from the list. The system capacity is also determined here. After selecting the version, you need to click “Next”.

Select Windows version 7

Now check the box that you agree to the license and click the “Next” button.

Agree to the license

Now you need to choose: update the system or perform a full installation. To install Windows 7 correctly, select the full installation.

Select full installation

Before you install Windows 7 correctly, you need to work with hard drive. Click Disk Setup.

At this stage of installation, you will have a utility at your disposal with which you can operate hard disk partitions. So, using the buttons you can delete, create and expand partitions, as well as format them.

Click "Settings"

Select (or create) a partition on which Windows will be installed and click the “Format” button. A warning will appear stating that now everything will be deleted from this section - we boldly agree, because we have prepared for the installation and have saved everything we need in another place.

Format the drive

Once formatting is complete, click Next.

And wait for the process to complete. This may take a long time.

Wait for the installation to complete

Completing the Windows installation

When everything you need has been copied and unpacked, Windows 7 will prompt you to enter names for the user and computer. Enter these details and click “Next”.

Enter your username and computer name

Now, if necessary, you can create a password. You can leave all fields blank and click Next.

Enter a password if required

You may then be asked to enter a code Windows activation. Enter and click Next. If there is no code, then you can skip this step and activate Windows later.

Enter your Windows activation code

After that, select the desired security mode on your computer and click “Next”.

Hello, dear users!

Surely many of you are interested in how to install the Windows 7 operating system on your computer quickly and without errors using boot disk. We can say in advance that this operation is much simpler than it might seem at first glance - in just a few minutes you will learn how to configure the BIOS boot loader to install the system from various media and perform initial setup OS.

Immediately after reading, you can easily install a fresh system on your PC - step by step Windows installation 7 from disk will become simple and as accessible as possible for you.

PREPARE THE LOADER

To ensure that when you turn on your computer, it starts to boot from the media on which the OS you need is installed, you need to correctly configure the bootloader. To do this, follow these simple steps:

1. Turn on your laptop, insert the disk into the drive, and then restart the device.

2. When the PC boots, press the key DEL. IN different versions BIOS these could be keys F2 or F11.

3. In the window that appears, select the item called Boot, located in the top menu.

4. Select the position “ Boot Device Priority"

5. In line 1 Boot Device— click Enter and select CD-ROM Drive - this is your media for Windows 7.

After setup BIOS menu you need to press a key F10 and confirm saving the actions. As soon as you do this, the device will reboot and the download process will begin, in other words, the installation begins.

INSTALLING OS ON PC

The Windows 7 installation program is designed in such a way that it does not cause problems for most people - this is facilitated by an intuitive interface and step-by-step structure. Despite this, you can get confused in some points, and to prevent this from happening, carefully study the presented order:

1. After booting your PC, wait until a black window appears with the words “Press any key to boot from CD or DVD.” To continue the process, press any key on the keyboard and wait for the OS files to load.

2 On the program page that opens, select the desired language, currency format, and keyboard layout (default parameters). After that, click on the “Next” button.

3. In the page that opens, select “Install”. If you are an advanced user who needs to restore the old OS rather than install a new one, pay attention to “System Restore”.

4. Select the Windows version in the next window, then confirm the action with the “Next” button.

5. Read license agreement about use software and continue.

6. On new page click " Full installation", then select the drive partition for subsequent installation of Windows 7. Before doing this, do not forget to format the desired partition.

After confirming the disk selection, the operating system will begin to install on the device. Progress will be displayed as a percentage. When the installation is complete, the program will require a reboot, which, in the absence of user action, is performed automatically. Now let's move on to the setup.

BASIC SETTINGS

The following instructions for setting up the OS installed on your PC will help you understand the basic parameters:

Fill in the lines with user and computer names - here you can show your imagination.

In the next window, set a password to access the PC and a hint. You can also skip this point.

Enter the activation code to confirm OS registration if you have a licensed version.

Select the system security options that suit you in the next window.

Set the time, time zone and current date.

The last point is selecting Internet connection parameters. For a home PC, it is advisable to select settings home network. After this, the OS saves the settings and can be considered installed. You can also install Windows directly from the working system.

To do this, just insert the media with the “seven” into the drive and follow the program instructions. Remember that you cannot format the drive this way, so it is not recommended to choose this method - it is better to prefer installing Windows from the BIOS.

Reinstalling Windows 7 is carried out in the same way as described above - there is nothing complicated in this process. After you have completed all this, it will be useful for you to read the article: .This is where I end.

Let's digress a little from the topic. Guys, a cool clutch-wallet, a great option for a gift or for personal use. Of course there are compartments for money, many compartments for cards, you can put driver's license. Positive reviews, great price!

Start installation

Selecting OS type

Terms of use and installation method

Installation process

Additional settings

In today's article we will look at the issue of reinstalling the operating system (hereinafter referred to as OS) Windows 7.

Most users greatly exaggerate the complexity of reinstalling Windows 7; in reality, this process is quite simple, the main thing is not to rush and carefully follow the recommendations outlined in the article.

So let's get started.

Step 1: Back up your data

Before you reinstall Windows 7, you need to copy all important data from the system disk.

Typically this content standard folders Videos, Documents, Downloads, Images, Music, Desktop, etc.

In the BIOS menu we need to select boot from DVD drive, save the changes, after which the computer will reboot.

After all the manipulations in the BIOS, it will boot not from the computer’s hard drive, but from the installation drive.

If everything is done correctly, then after the reboot you should see the following image on the monitor screen:

Step 3: Reinstall Windows 7

On at this stage The contents of the installation media are loaded into the computer's RAM.

The next 2 screenshots show the initialization Windows installer 7:

Starting from this window we have the opportunity to customize our OS.

At this stage, we can select the language (the “Installed language” field), the display of the time format (the “Time and currency format” field), the keyboard layout or the input method on the tab of the same name.

As a rule, there is no need to change anything here and you can safely click “Next”.

And if this step was not completed initially, you should restart the computer, go into the BIOS, select boot from the hard drive, execute backup then repeat all the previous steps again.

If all data is saved, select system disk and click “Format”.

Important: Do not confuse the system disk on which the OS is installed and logical drive(s) on which you store data. In our case, “Partition 2” is the system disk, “Partition 3” is the logical disk on which the data is stored.

The system once again warns that all data on the disk being formatted will be deleted. Click "OK".

After this, the direct installation of the OS begins on hard drive, which is divided into several stages.

At all stages, installation occurs automatically, without user intervention.

Installation time, on average, takes 10-15 minutes and depends on the characteristics of your computer.

After rebooting, you need to go to the BIOS menu and select boot from the hard drive, saving the settings.

If you did not have time to complete the procedure BIOS settings at this stage, it can be produced later.

The installation media can be removed and the operating system is installed on the hard drive, but not configured.

The next step is to enter your username and PC name. Usernames and PC names can be absolutely anything and can contain uppercase or lowercase Latin and Cyrillic letters and numbers.

To switch the language, use the layout switching panel (located at the top). Click “Next”.

The best way to get rid of viruses and constant crashes in the operating system is to install a new OS. Most often, installation occurs by creating bootable flash drive or using a disk with a new system, but there are several quick ways that will help you install a new copy of Windows without using third-party digital media.

The following OS replacement options will suit users personal computer, who have:

1. The drive is broken, damaged or missing.
2. No DVD.
3. It is not possible to use Flash media.
4. Absent external HDD disk.

Installing Windows via Hard Drive and computer command line

Hard drive is a hard drive (HDD) of a personal computer or laptop, which is designed for storing user files and programs. Using the hard drive, you can install a new operating system.

Installation of a new OS occurs through command line when turning on the computer. This option of replacing the OS will allow you to clear all old disk partitions and create new ones. In order to start the process of replacing the operating system, you need to download the iso image the required version Windows. This can be done on the official Microsoft website or through a torrent client. The image will be downloaded to your computer in archive format; it needs to be unpacked to drive C. Then follow these instructions:

1. While starting the computer, hold down the F8, Space or ESC button (depending on your computer model). After a few seconds, the custom menu should appear on the screen additional options OS loading.
2. The next step is to select “Troubleshooting”. The selection is made by pressing the Enter key.

1. Next, a system recovery options window will appear. In it you need to select input via the keyboard.
2. Select a computer user from the list and enter a password, if one was set when logging in.
3. From the proposed installation options, you need to select “Command Line”.
4. After opening the command line window, you should type several commands. Input is via the keyboard. You can print a new command by pressing Enter. Navigate to the drive that contains installation file system using the following command: “X:windowssystem32C:” (without parentheses). Press Enter (If the installation file is not on drive C, replace the letter in the command with the desired one).
5. Enter the following command: ">setup.exe" (without parentheses).
6. In a few seconds, the installation of the new OS will begin, which is no different from installing using a disk or flash drive.

This method is suitable for operating systems Windows 7, Win 8/8.1, Windows 10.

Note: Please note that the installed and downloaded OS must have the same bit depth (32 or 64 bits).

Using the installation image of the system and the virtual drive

The easiest way to install Windows is to download a system image from the Internet. The process of downloading the image archive is exactly the same as in the previous section of the article, however, you do not need to unpack it. The disk image allows you to install any program, game, utility or operating system without using a disk drive.

Users of OS Windows XP/7 must install additional software to work with images. In newer Windows versions You can work with images without using additional software (such files are recognized as archives; to install the image, you need to open it with an archiver and run the installation file).

Some tips for downloading an OS image:

1. Do not download files from suspicious sites and resources.
2. Refrain from choosing various modified OS builds. They almost always contain a lot of viruses and spyware that can steal your personal information, passwords or credit card numbers.
3. Choose only trusted resources (Microsoft websites or specialized utilities for installing a new OS).

In the imaging utility, create a virtual disk with the new OS (read more about the most popular and reliable programs for creating virtual disks ods see the next section of this article). In order to create new disk, select the desired iso image in the program. Next, the program will provide everything necessary instructions. The disc creation process will take less than a minute. Next double click Click on the created disk, thus launching the OS installation window.

Programs for quickly creating a virtual drive

If you are using OS Windows XP/7, then you should select a program to work with virtual optical drives. The list below shows the most popular programs and their features:

1. Daemon Tools. One of the very first and popular programs on the market for similar software. Conditional program free for users Lite and Premium versions available. Working with existing ones virtual disks organized in a very convenient way, the user can quickly create and delete disks. IN free version Software, it is possible to create only 4 images at a time. The program supports iso formats, img, dmg, vdf, mds, mdf.
2. The program is distinguished by the ability to create large number virtual disks at the same time. There is also the ability to record to a removable CD. With this program, users will be able to store all their disks virtually in case physical disk will be damaged. It is also possible to download images from the Internet and mount them for further installation using this program.
3. Software that works exclusively with ISO images. Images are mounted quickly and execution time is kept to a minimum. It is possible to convert images of other formats directly to ISO.
4. The utility is free and available for download. Function available self-creation disk images.
5. Virtual CloneDrive. A program with a minimum of settings, high speed execution and reading of disks. The OS recognizes the created disk as a physical CD/DVD-ROM.

Free OS updates

Microsoft regularly provides users with licensed version OS possibility free update to newer software versions. Windows users 7 Home Edition can be upgraded to the Professional or Premium version through the official Microsoft.com website or through the Update Center, which is located in the control panel of each computer. Installing new software is as simple as pressing a few buttons. Basically, installing a new system takes from half an hour to 120 minutes, depending on the speed of operation central processor computer or laptop.

It is possible to replace Windows 7 with Windows 88.1 for free. Follow the instructions to find out about the possibility of updating the OS:

1. Download the Update Assistant from Microsoft here
2. Run it and wait for the installation to finish. This will take a few minutes.
3. By following the on-screen instructions, you will learn which new version The OS is compatible with your system. Next, the program will offer to download new software and install it.