• Enable normal boot mode win 10

    Comparing a PC with a separate country, it becomes clear that we are only guests there. Someone else's soul is darkness. For us, the operating system is a mystery. How it works is not clear to us, users. It loads - we are happy - we write, play, listen to music. But suddenly it broke. Should I immediately call a specialist and give him the money? No, you can fix it yourself. And for this you need safe mode in Windows 10.

    This is a special boot during which the OS diagnoses and heals itself. Windows does not use externally installed programs during this login. Only your own, and those in limited quantities. Autoloading is not available at all. Use to check the software's impact on your system. At the same time, you will find out how much startup programs slow down your computer. There will be a reason to think about cleaning it.

    How to enter Safe Mode in Windows 10? Find out and become the master of the situation! You will be able to carry out a complete maintenance of your PC, remove harmful programs, deal with unruly equipment, remove the password, launch the admin, etc.

    Outside intervention is acceptable, but must be done carefully. If the OS itself offers Safe Mode or does not boot without it, this is a bad sign. This means there are big problems somewhere. What is good about Windows, given its complexity and severity, is its ability to self-diagnosis and recovery.

    How to start Windows 10 in safe mode

    So, everything loads, but does not work correctly. Or you decided to compare how much memory is consumed by different software. Or the device refused to work. First, we'll show you how to boot into Windows 10 safe mode through the config settings. Please note that with this method you will constantly boot in this configuration.

    After a reboot, which you must initiate yourself, Windows 10 will boot into safe mode. And every time you turn on your PC, you will be in Safe mode. It's not convenient and gets in the way. To avoid this, uncheck the box and it will disable restarting your computer in Windows 10 Safe Mode.

    Method No. 2 - how to start safe mode in Windows 10. Both the above and this method work when the system actually starts - keep this in mind!

    We succeeded in enabling safe mode on Windows 10, now we are waiting for it to load.

    These are options that allow you to boot Windows 10 in safe mode with a working OS. When it initially loads and at least works. Let's look at how to enter Windows 10 safe mode if the system crashes and hangs. You will need a bootable flash drive or laserdisc. We recommend creating one of these during the tens installation phase. If it’s too late, everything’s broken, take it from friends.

    1. We need Boot Setup - boot menu. You will find it when you boot your computer. The start button may vary. On a PC it’s F12, but on laptops it’s different. Read carefully what is written on the screen upon startup.
    2. If there is no such window, go to BIOS. It's either DEL or F2 - whichever it is. And there select the Boot option. In Lenovo, for example, the Bios is loaded with a separate button (with a curved arrow). In different models, look near the main button or at the power connector.
    3. Set up boot from USB. Use the "" and "↓" keys to go to First Boot Device and press Enter. Select the device as shown in the screenshot.
    4. Then save (F10) and the computer will reboot.
    5. A window will appear with a large button in the middle. And at the bottom there will be a small option “System Restore” - you have already seen it if you tried the previous options. Click.
    6. "Diagnostics".
    7. In this case, entering safe mode is done through the Windows 10 command line. Select.
    8. And in it we type one of two commands:
    1. Following command after successful completion of the operation: bcdedit /set (default) safebootalternateshell yes
    2. Let's reboot.

    The computer will start in Windows 10 safe mode. Now you can breathe easy - the system is alive. Let's give a little advice.

    In any case, go to “Device Manager” (RMB on the main button) and check all the drivers. If you see a yellow exclamation mark, this is a failure. Update. And run your antivirus. Malware usually puts itself in startup. Since it is disabled, no one will interfere with the antivirus.

    To exit Windows 10 Safe Mode, restart your computer. If you specified loading in Safe Mode in the config settings, then go into it again and do the opposite.

    If you used the command line from the boot device and everything worked out, then you need to disable it. Type bcdedit /deletevalue (default) safeboot at the command prompt.

    Windows 10 Safe Mode on a Laptop

    There is no difference in how to run it on a laptop or on a PC. You can find advice online on how to get into safe mode in Windows 10 - press shift+F8 when booting and hold. After this, a window for selecting an action should appear with the “Diagnostics” item. However, testing on three devices showed that this method does not work. Give it a try, the sample was small. Maybe you'll get lucky.

    Another strange tip on how to open safe mode on Windows 10 is to crash your PC or laptop. In the second case, remove the battery during operation. After 3-4 times, the menu for calling actions appears (again, “Diagnostics”). But if the computer already boots, use the first two methods to call up safe mode in Windows 10. And if the computer does not boot at all, you will still have to look for a boot disk. In general, the method of entering safe mode in Windows 10 is controversial, and the equipment can be completely killed.

    Let's summarize. There are three ways to enter Safe mode:

    1. Configuration settings. Works when the system is functioning and boots properly.
    2. Command line. The same applies to a working operating system.
    3. Boot from installation device. You need a flash drive or CD/DVD with an OS image or a recovery device (if you bought the OS, look in the box with the documents).

    We also disable loading from Safe mode in three ways. For No. 1 – reverse actions with unchecking. No. 2 and No. 3 – command on the command line. Be careful and careful.

    Read, how to boot into Windows Safe Mode. Let's look at the standard methods, using a recovery disk or using a specific keyboard shortcut. If the operating system does not boot or does not work correctly for one of many possible reasons, then sometimes the only way to restore its functionality and gain access to your data is to boot the computer in Safe Mode and correct errors using it.

    Windows 10 Safe Mode

    If you've been using Windows 10 for a while, you've probably noticed that the old ways of booting your computer into Safe Mode no longer work. Those. By pressing the F8 or Shift+F8 keys while the system is booting, you will no longer be able to boot the operating system in safe mode. But this does not mean that there are no more in Windows 10 Safe Mode. You just need to go through other procedures to download it. Let's look at them in more detail.

    When you enter Windows 10 safe mode, the operating system loads a minimal interface and only the most necessary services and drivers that are necessary for the system to function.

    Method 1: Using the System Configuration tool (msconfig.exe)

    The easiest way to boot into Safe Mode Windows 10, this is using the . Many users know it by its executable name: msconfig.exe.

    To run this tool, you need to open a window "Run"(Windows key combination + R) and enter msconfig.

    Also, System configuration can be launched using the search box next to the menu button Start. Just enter .

    In the tool window that opens, go to the tab Downloads, and in the section select Safe Mode.


    After this, the system will prompt you to restart your computer for the changes to take effect. You can continue working on your computer without restarting, or you can restart it and it will automatically boot into Safe Mode.

    Method 2: Restart your computer by pressing the Shift key (Shift + Restart)

    Another way you can run Safe Mode Windows 10, this is to restart the computer while holding down the Shift key. To do this, open the menu Start, press the button Shutdown and hold down the Shift key and select .

    This combination can also be used from the lock screen.


    / Additional options.


    In the window Additional parameters select


    Windows 10 will notify the user that the system can be rebooted to launch additional options, one of which is Safe Mode. Click the button Reboot.

    After the system reboots, select with which parameters you want to boot the system. To boot the system into Safe Mode There are three options (F4 – F6).


    Method 3: Boot using a recovery disk

    Windows 10 has a tool available to create recovery discs.


    Boot into Windows 10 using the recovery disc created this way. After this, the system will prompt you to select a keyboard layout, then select the menu Troubleshooting / Additional options. Further actions are the same as those described in the previous section.

    Method 4: Special boot options

    Although there are several ways to boot Windows 10 into Safe Mode, this method will be the most correct - provided that the operating system that needs to be loaded into Safe Mode fully operational.

    It's quite easy to do this:

    • Open Options
    • Go to Update and Security / Recovery
    • In the section Special download options press the key Reboot now
    • After this, Windows 10 will reboot and prompt you to select one of the menu items. Select Troubleshooting / Additional options.
    • Next, follow the steps described in Method 2

    Described methods for loading the operating system into Safe Mode relevant for both Windows 10 and Windows 8.1. Starting with these versions of Windows Safe Mode has ceased to be a function that only IT specialists use in their work. Now this is just another one of the functions of the operating system that is available to every user, and with the help of which the user can easily

    There is probably not a user who does not encounter problems when working with a computer. These can be either virus infections of the system and driver errors, or problems with logging into the system during normal loading of the Windows system. To solve such problems, you will need to log in to the system in safe mode. Unfortunately, many users in Windows 10 do not have the ability to boot the operating system in safe mode using the “F8” key. In this step-by-step instruction with photos, we will show you several ways to start the Windows 10 operating system in safe mode.

    Step 1

    How to enter safe mode through system configuration in Windows 10

    Start by pressing the "Win" and "R" keys at the same time.

    Step 2

    In the Run window, enter the msconfig command and click OK.

    Step 3

    Next, go to the “Boot” tab and check the box next to “Safe Mode”. Then click the "Ok" button. After restarting your computer, you will be able to log in in safe mode. Please note that in order to boot the operating system in normal mode, you will need to uncheck this box.

    Step 4

    Entering Safe Mode through Windows 10 Special Boot Options

    Click the Start button and select the Settings menu item.

    Step 5

    The next step is to click on Update & Security.

    Step 7

    At this point, in the “Select Action” window, click the “Diagnostics” button.

    Step 8

    Now click on “Advanced Options”.

    Step 9

    The next step is to go to the “Boot Options” section.

    Step 10

    Click the "Reboot" button.

    Step 11

    In the “Additional boot options” window, use the arrows on your keyboard to select the required safe mode and press the “Enter” key to select the required item.

    Step 12

    How to start Windows 10 in safe mode using the Shift key

    In this method, you need to restart the operating system. You can do this by clicking the “Start” button and clicking “Shut down.” Then you need to hold down the “Shift” key and click the “Restart” line. The next steps for choosing to sign in in Safe Mode are the same as signing in through the special Windows 10 boot options.

    Step 13

    How to enter Safe Mode if Windows 10 won't boot

    If the Windows 10 operating system does not boot, then to log into the system in safe mode you will need an installation disk or flash drive. Load the flash drive with the operating system files, select the installation language and click “Next”.

    Step 14

    At this stage, click on the “System Restore” line.

    Step 15

    Select the "Diagnostic" action.

    Step 17

    Now select Command Prompt.

    When you have problems with your Windows computer, one of the first troubleshooting steps is to boot into Windows Safe Mode. Safe mode is a simple, stripped-down version of the operating system, loading only the most important files and drivers. In safe mode, you can fix a number of errors with drivers and cure your computer of viruses that prevent the system from starting up stably. If earlier you could enter the familiar Windows 7 using the F8 button when you start the computer, then Windows 10, 8 no longer have this function, but there is a trick that will help you return the F8 button to enter safe mode when you turn on your computer with Windows 10 In this guide, we’ll look at how to enter and launch Safe Mode in Windows 10 from the desktop and return the usual F8 button to always enter through it, and we’ll look at how to disable Safe Mode to avoid cyclic booting.

    Note: The easy ways are at the bottom, provided you can boot into your desktop.

    How to start Safe Mode when booting Windows 10

    If the Windows 10 system does not boot to the start screen and you need to enter or start safe mode when turning on Windows 10 through the “BIOS”, as for example before in Windows 7, with the F8 key, then you will need to get into the Windows 10 recovery environment using other methods. which are described below. It can be created on another working computer or while yours was still working.

    Note: If you can boot to your desktop, then launch Command Prompt as an administrator and proceed to step 3.

    Step 1. When you start from the installation flash drive, go to the point installations and click on the link below " System Restore".

    Step 2. You will be taken to the additional settings of windows 10. Next, go to the settings Troubleshooting > Advanced Settings >Command line.


    Step 3. Enter the following code into the command line (you can copy it in its entirety, you can enter each command via Enter):

    c:

    bcdedit /set (default) bootmenupolicy legacy

    exit


    Step 4 . You can now start in safe mode using the key F8 in Windows 10, press the button F8 continuously during system boot until the menu appears with download methods. If you want to go back to how it was, then enter instead of legacy > standard. There will be the following type of command bcdedit /set (default) bootmenupolicy standard .

    1. Press the restart button on the computer itself many times in a row to trigger an error and bring up the process diagnostic menu.
    2. Turn on the computer, wait until it boots as much as possible before the error occurs. Next, press and hold the power button on your computer to turn it off completely. Repeat the procedure 3 times, by the 4th time you should see a recovery menu.
    3. If all else fails, then follow Step 1.

    How to add Safe Mode to the OS boot selection menu

    Windows 10 now has additional startup options. This will look the same as if you have multiple versions of the OS installed on your computer. If you often use safe mode, then setting up the menu when choosing an OS will be very excellent and convenient. In the picture below I have configured some settings for myself. Let's look at this method.


    Note: Before performing this method, read it from the beginning to the end and you will understand the meaning.

    Step 1. There will be three commands for the three menus created. Maybe you don’t need three, but only need one menu with safe mode. Launch Command Prompt as Administrator and enter the following commands of your choice.

    1. bcdedit /copy (current) /d "Safe Mode"- Let's create a safe mode boot.
    2. bcdedit /copy (current) /d "PSU with network"- Let's create a safe mode boot with a network (Internet access).
    3. bcdedit /copy (current) /d "BP CMD"- Let's create a safe mode boot with the command line.



    Step 3. The system configuration will open, go to the "" tab. We will see the list that was specified via the command line above. Let's customize each menu.

    1) . Select "safe mode" from the list at the top and click on the checkmark at the bottom and select " Minimum". Next, check the "" box and click apply. You can also set a menu timer, for example, after 10 seconds it will automatically load just Windows 10. This way the boot menu will appear in safe mode.


    2) . Select "PSU with network" from the list and select "Network" from the bottom and check the " Make these boot options permanent". Click apply and this way we can load safe mode with the network, i.e. with the ability to access the Internet.


    3) . Highlight "BP CMD", below select " Another shell"and check the box" Make these boot options permanent." Click Apply and OK.


    How to enter Safe Mode in Windows 10

    Step 2. You will be taken to the windows 10 recovery environment. In this environment, you can reset settings, restore the system, and much more. In the recovery environment, click on Troubleshooting.


    Click the button Reboot.


    Click on your keyboard F4 to begin the procedure of starting Windows 10 in safe mode.


    How to enter safe mode in Windows 7

    Method 1. Windows 7 starts when you press a button F8. Once you have turned on or restarted your computer, press the F8 button at 1 second intervals. The method will also work with Windows XP. After calling up the additional settings menu, select the download option.


    Windows 10 Safe Mode is used to fix various problems. It starts when the system is unstable, during virus removal, or when installing new drivers. This mode will allow you to find out the reason for the blue screen of death.

    How to enter safe mode?

    Before the release of Windows 8, entering safe mode was possible by pressing the F8 key on the keyboard during a system reboot. But in new versions there are several options for enabling this mode.

    Using the Msconfig utility

    Press Win+R to open the Run window:

    Run –> msconfig –> System Configuration –> Boot


    Important! If you check the “Safe Mode” checkbox, the system will begin to boot constantly only in this state. To set the standard boot, go to “System Configuration” again and uncheck the box, then restart the PC.

    Video

    For more information on how to exit safe mode on a Windows 10 computer, watch the video.

    From the Command Line

    1. Launch Command Prompt with System Administrator rights. Run the command: bcdedit /copy (current) safeboot minimal .
    2. Restart your computer. This can be done in the standard way, or from the Command Line using the command: Shutdown –f –r –t 0 . After this, Windows 10 will always boot in Safe Mode.

    Healthy! In order for the startup method selection dialog to appear during a reboot, you need to enter the command in the Command Line: bcdedit /set (default) bootmenupolicy legacy. To return to standard boot, type bcdedit /set (default) bootmenupolicy standard .


    While the computer is restarting


    Using a boot disk/flash drive

    This method is used if Windows 10 does not start on the computer at all. Create a boot disk or flash drive on another device, then follow all the steps that you do when reinstalling the operating system. In the language options window, click Next.

    In the next dialog box, run System Restore. After that, follow the path:

    Enter the command: bcdedit /set (default) safeboot minimal . Once completed, close the Command Prompt and click Continue. The computer will automatically restart in Safe Mode.

    Conclusion

    To increase the startup speed of Windows 10, the ability to enter safe mode while restarting the PC is disabled. You can enable the function in several ways, as described above and shown in the video. According to the editors, the best option is to use the Msconfig utility.

    Read more: