How to remove air under the glass on an iPhone. How to properly and accurately stick protective glass onto the screen of a phone or tablet without bubbles at home: instructions, photos, videos. How to remove air bubbles from under protective glass: tips

About protective glass for smartphone screens and their advantages over protective films. There were quite a lot of comments, some stated that it was completely pointless to stick something on the phone. If you think so, then this post is not for you. But among those who gave advice on how best to glue, no one told the method that I will discuss below. I came across it relatively recently. And maybe I will act as “Captain Obvious,” but I hope I will be useful to someone.

So, the usual way- this is to create a humid atmosphere to remove all the dust (for example, go to the bath and turn on a hot shower), ideally clean the glass of the phone and quickly, before new dust accumulates, apply the glass. Alas, it’s not possible to stick it more or less evenly the first time. It happened that the glass had to be peeled off and glued again. This increased the chances of catching dust particles, and the sticky layer could be damaged. In any case, the advantage of glass is that it hides almost any hairs; specks of dust and even air bubbles disappear on their own in a day or two. Particularly confused people can remove particles that accidentally fall under the glass using tape. However, as it turned out, there is a simpler way to “sticker”.

Most often, the glass comes with accessories - wet and dry wipes for wiping the screen and a set of stickers. Well, the big one is for dust particles, ok, but what are the small ones for (Guide Sticker) - I didn’t understand, and I didn’t even think about it.

And the casket simply opened. First with protective glass no need to remove the film. Ideally place it on your smartphone screen and secure it with these very narrow stickers. Then “flip” the glass and clean the smartphone screen thoroughly (you can still do this in a damp room). Remove the film from the glass and apply it to the screen. Ready. Since this method was discovered to me, I glue everything the first time and almost perfectly!

You may ask why I change my protective glass so often? It's simple - I ordered several 0.2 and 0.26 mm glasses for testing and it turned out that they were terribly fragile. They cracked even if the phone was unsuccessfully placed on the table with the display down or hit with something in the bag. So I spent it and again ordered the usual 0.3 mm and I’m glad. Yes, they are thicker and it is not as convenient to perform gestures from the edge of the screen (if your smartphone screen is curved like the iPhone), but I sometimes drop the phone and do not want to accidentally break the screen.

In the first one, I also wrote about 3D type glasses, which are also rounded towards the edges, but in the end I stopped using them. The option with a metal edging does not look very good; dirt gets under the edges. Carbon looks great, but is too fragile. Plus, some cases that go over the edges of the iPhone are incompatible with 3D glass. I have a lot of covers and I change them periodically.

Protective glass is several times harder than the most durable film, and therefore saves the device not only from... As the manufacturers say, it can even withstand a blow from a hammer. We do not recommend conducting such experiments. But we can say: if you fall, it is the protective glass that will most likely break, and not the screen of the device.

In this case, the glass does not affect the sensitivity of the sensor and the brightness of the image.

Iphones.ru

However, glass is more expensive than film. And you can choose it only for relatively popular models smartphones and tablets.

How to stick protective glass

Step 1. Prepare the room

If dust gets under the protective glass, you will have to live with bubbles on the gadget's screen or struggle to remove them. To avoid this, wet clean the room or at least:

1. Ventilate the room.
2. A clean rag, preferably with detergent, wipe the table on which you are going to glue the protective glass.
3. Wash your hands.

Step 2: Prepare your tools

In addition to the device and protective glass, you will need:

1. Display cleaning liquid, antistatic agent or regular alcohol.
2. Microfiber cloth.
3. Stationery tape.
4. Scissors.
5. Plastic card or scraper.

Step 3: Degrease the screen surface

To do this, use display cleaning fluid, antistatic agent or alcohol. Carefully remove all stains. If you just removed the old one from the phone, wipe off any remaining adhesive. Then wipe the screen dry with microfiber.

Step 4. Glue the glass

Take the protective glass in your hands. On one side it is covered with a film that needs to be removed. Now the glass must be held at the edges so as not to leave fingerprints on the surface.

Carefully, without touching the screen, place the glass 5–10 mm from the smartphone. Align the glass so that the speakers and buttons are under the corresponding holes.

The most exciting moment has arrived. When the glass is perfectly aligned with the edges, simply lower it onto the screen. Thanks to the adhesive inner coating, it will stick on its own.

If any bubbles appear, remove them with a microfiber cloth. Wipe the screen with it from the center to the edges, expelling excess air.

Step 5: Remove missed dust particles

Perhaps some speck of dust got under the glass and left an additional bubble on the screen. Unfortunately, microfiber cannot be removed. You will have to re-raise the protective covering.

This can be done using a plastic card or a scraper. In addition, we will need a strip of stationery tape. It is better to take transparent adhesive tape: white construction tape or colored varieties will leave marks on.

Grasp the edge of the glass, lift it enough so that you can get a speck of dust. Now stick a piece of tape on it and sharply tear it off along with the debris. All. All that remains is to return the protective glass to its place.

How to ideally stick, glue, glue protective glass onto the screen of a mobile, smartphone or tablet at home.

From the article you will learn how to glue protective glass to a smartphone, iPhone 5, 5S, 6, 6S, 7, Xiaomi, so that later you don’t have to get rid of the air tubercles that appear under the glass.

How to properly and accurately stick protective glass onto the screen of a Samsung smartphone without bubbles: instructions, photo video

• Any device that is used daily requires protection. And if you are the owner of an ultra-modern gadget, then neglecting the possibility of installing a protective coating on the display can cause chips and scratches on the screen.
• Such additional protection will help keep the gadget looking attractive longer, and will also extend the period of its active use. Even top devices that have special screen protection need additional protection in the form of glass. After all, the most durable glass from which the display is made can be scratched by sand and keys.

Protective glass is a reliable barrier against scratches, impacts, and chips. After installation additional means protection, various defects in the gadget’s display are not dangerous.

If you follow the instructions, you can handle this difficult task at home yourself.

Protective glass is a reliable barrier against scratches, impacts, and chips.

How to glue protective glass to a smartphone screen?

• A beginner may think that the process of gluing protective glass itself is complicated. But with a little practice, you will become a real expert in this matter.
• There is no significant difference in which device screen you will install a protective coating on. Whether it is an iPhone, a smartphone or a tablet, the procedure does not differ significantly.
• To avoid having to carry out the procedure of gluing the protection several times, an inexperienced person should start not from the screen, but from the back panel of the gadget.

You need to think about the fact that the device’s screen needs protection immediately after purchasing it, because the display is very sensitive. Various mechanical damage can occur even if the device is constantly in your pocket.

There is a possibility of scratches from coins, keys, or simply from the fact that the owner of the device scratches the display of the gadget with a fingernail. If there are minimal scratches on the display while gluing the protective glass, no manipulation will save you from the appearance of bubbles.

That is why if you decide to remove the old protective glass and replace it with a new one, you must act with extreme caution.

• alcohol wipe
• dry wipe
• special liquid for cleaning TV or computer screens
• scotch
• protective tempered glass

Step 1:

• Let's start the process of gluing protective glass by preparing the workplace. The room where you will be applying the protective coating needs to be wet cleaned.
• This way, you will reduce to a minimum the amount of dust and micro-debris floating in the air. You can avoid the appearance of air bubbles if the process of gluing the protective glass takes place in the kitchen or bathroom.
• If you glue protective glass in the bedroom, you will have to spray water from a spray bottle so that the textiles available here in large quantities do not attract debris particles and complicate the procedure.

Step 2:

• Hands should be washed with soap. It is also worth having wet wipes with you in case, despite cleaning, dust particles get on your hands or on the work surface. You can remove them without getting up from your seat.
• We place all the tools, devices, and protective glass necessary for work on a clean work surface.

Step 3:

• Remove the old protective glass from the phone screen by slightly pulling the edge at an angle of 60 degrees.

Step 4:

• Use a microfiber cloth or regular alcohol cloth to clean the phone display. It is important to remove any dirt remaining after removing the old protective glass.
• You can use a special cleaner that is sold in hardware stores.

If you have time, then it is quite possible to prepare such a remedy yourself. The recipe is as follows:

• Take 5 parts water and one part alcohol.
• Add dishwashing liquid (a little) to the resulting mixture.
• Rub the resulting mixture onto the phone screen until shiny.
• We remove the remaining dust particles or micro-debris particles with a piece of tape.

Step 5:

• Remove the protective glass from the packaging. We find the film and remove it.
  The protective glass must be positioned so that the central button and speaker align with the holes in the glass.
• We run our finger from the center to the bottom edge, thus securing the overlay surface.
• Let's take it credit card or a special spatula, which is often sold complete with protective glass. We move along the glued glass, not pressing hard on its surface, and remove small air bubbles.
• A few days after the procedure is completed, the very tiny bumps will disappear on their own. However, it is necessary to ensure that the display coating has a smooth, perfectly flat surface.

Why is tempered glass protective glass better than special display film:

• Protective glass does not affect the color rendition and sensitivity of the gadget
• Tempered glass - reliable protection of the original glass of the gadget from falling and other mechanical damage
• It is easier to glue glass at home, since dust particles of any size leave bubbles under the film
• It is almost impossible to determine the presence of protective glass on the screen
• The gadget does not become heavier with protective glass, and the dimensions remain the same
• The protective glass has an oleophobic coating, which serves reliable protection from mechanical damage
• The glass surface is pleasant to the touch.
• Unlike film, tempered glass does not come off accidentally because it is attached firmly and reliably

If you purchased a high-quality coating, then such a protective glass can be re-glued onto a smartphone, iPhone 5, 5S, 6, 6S, 7, Xiaomi. When reusing, after carefully removing the coating, you will need to treat the adhesive side with formic alcohol.

• The napkin is moistened with a special agent, and the glass is lightly wiped. After which you need to leave the gadget for a while to let the liquid drain.
  Protection is installed in the same way as described above.
• The main thing is that the holes for the central button and the speaker match. Again, the air and remaining liquid are expelled with a credit card or spatula.

From the video you will learn a simple way to equip your gadget with a protective surface made of tempered glass, without the help of a specialist.

Video: How to stick protective glass on the screen

Video: glass on Xiaomi Redmi 4X

How to properly and accurately stick protective glass onto an iPhone phone screen without bubbles: instructions, photo video

The protective glass is selected in accordance with the specific brand of phone. Therefore, no pre-treatment of the protective coating is required, unlike conventional film.

The protective glass is glued to the front side of the gadget in the same sequence as the film. You just need to take into account some nuances:

• Carry out all manipulations with caution
• Strong bending can cause cracks in the glass.
• The glued glass does not need to be smoothed, the main thing is to expel the formed air bubbles

How to perfectly glue a protective glass onto a tablet without bubbles: instructions, video

Video instructions will help you properly stick the protective glass on your tablet.

Video: How to stick protective glass on a tablet

How to remove air bubbles from under protective glass: tips

• It is better to carry out all manipulations in a room with a limited amount of textiles (in the bathroom, in the kitchen).
• Bubbles that appear after gluing are removed by smoothing the surface of the protective glass with a flat object (for example, a credit card).
• If air bubbles still remain, it is better to repeat the glass gluing procedure. But before this, the gadget’s screen must be wiped with a special cloth that comes with the protective coating.
• Micro-debris from the protective glass is also removed with this napkin. If a special napkin is not available, a computer napkin is used.
• When gluing the protective glass, it is better to hold the device with your left hand. Use your thumb to hold the edge of the protective surface.
• Stick carefully. Make sure that no air gets under the protective coating and that the integrity of the protective accessory is not compromised.
• If air bubbles remain under the glass, then you need to lift it by the edge and then carefully lower it so that no air gets in.

Now you don’t have to look for information on how to glue protective glass on a smartphone, iPhone 5, 5S, 6, 6S, 7, Xiaomi, because we have collected all the answers in one article.

Video: How to stick protective glass on an iPhone screen

Many people buy new smartphone models not only to use all modern features such gadgets, but also to emphasize your status. And what style can we talk about if the screen is scratched or completely cracked. In order to prevent such possible troubles, almost every phone user uses a screen protector. Bubbles arise from air that gets under the surface of such a useful accessory as film. It happens that a “defect” is formed due to a small speck of dust, then the process becomes a little more complicated - you will have to change the entire film. In order to stick the film on your smartphone for the first time or re-stick it, you need to know how to remove bubbles from the phone’s film, because this is perhaps the only and main nuance in this matter. Today we will talk about this in more detail and try to get around all the obstacles.

What are the steps for tempering glass?

This must be completed before tempering the glass, as the tempering process will weaken the glass if it is cut or etched later and may increase the likelihood of breakage. The glass is checked for defects as cracks or bubbles can cause the glass to break during the tempering process. This eliminates any burrs created during cutting or etching. The glass is washed to remove any glass grains deposited during grinding, as well as any contaminants that may interfere with the tempering process. The cutting glass is heated in a tempering furnace. Glass is fed into the tempering furnace either intermittently or continuously. The oven reaches temperatures of over 600 degrees Celsius, with the industry standard being 620 degrees Celsius. The heated glass is then exposed to air jets under high pressure from different angles. This rapid cooling causes the outer surfaces of the glass to cool and shrink faster than the center, giving tempered glass its strength.

• First, the glass is cut into the required shape.
• If any defects are found, the glass cannot be tempered.
• The cutting edges are ground and polished smoothly.

Replacing the film

This procedure requires extreme caution and high level cleanliness in the room. It is best to carry out all manipulations in the bathroom, since due to humidity, dust does not fly in the air. The following needs to be done:

1. We take the smartphone in our hands and smooth out any air bubbles that have arisen with our fingers or another flat, but not sharp, object. If nothing works, then you will have to peel off the film and try to put it back in place again.
2. Display mobile device It is best to wipe with a special computer cloth. With the same napkin you can clean off all the dirt from the old film.
3. Now we firmly take the device in our left hand, hold the edge of the film with our thumb and carefully stick it on the glass so that no air gets under it.

If you were careful and your film is not very worn, then everything should work out without any difficulties.

Oleophobic when translated from Greek literally means "afraid of oil", but Oleophobic does not mean "oil-proof" or "smear-proof". You will still leave fingerprints on your smartphone or tablet screen, which will become obvious after using your touchscreen device for a few minutes.

However, the oleophobic coating is designed to repel oils and dirt from your skin, making it easy to clean with just a microfiber cloth. Skin masks will not “stick” to the screen, so they can be easily wiped off. You don't need any cleaning chemicals, water or other liquids to clean your touch screens, just a cleaning cloth and a small amount of energy.

Safety glass

How to remove air from under the protective glass? Here everything is a little more complicated, since excessive movements can disrupt the integrity of the protective accessory. We recommend that you familiarize yourself with the most common tips experienced users mobile devices:

• Use your driver's license or plastic card to “squeeze” the air out from under the surface of the glass.
• You can use the most ordinary needle that everyone has at home. Take a needle and thread it under the places where air has accumulated. Carry out the procedure very carefully - you need to lift the edge and then press it tightly so that air cannot get in there.
• If you have fishing gear on hand, you can use fishing line. Hook up the accessories with the fishing line and move it until the problem areas are gone. All that remains is to simply return the glass to its place and gently press it.
• Some experts recommend using a household hair dryer to correct defects. Warm up the glass of your mobile device at a distance of 20-30 centimeters, place it face down on a flat coffee table and leave it under the pressure of books overnight. During this time, all the air should come out.

Important! You can also remove the glass using any of the above methods and clean its surface with a strip of tape. The tape will collect all the dust and small debris, after which you can glue the protection back on.

Why shouldn't you use cleaning solutions on your touch screen?

The special oleophobic coating on your device's touchscreen makes it easy to wipe off fingerprints, oils and dirt from the screen with just a microfiber cloth. If you regularly use screen cleaning fluids, you will remove the oleophobic coating and leave your touchscreen without any protective coating.

What is pressure sensitive silicone adhesive?

Once the oleophobic coating is removed, you'll still get the same amount of fingerprints on your screen, but a cleaning cloth or microfiber cloth won't remove those marks any easier. Someone famous in the source title. Pressure-sensitive adhesives are relatively thin, flexible adhesives coated on one or both sides. Pressure sensitive adhesives do not require the use of solvent, water or heat to activate the adhesive. The bond is directly affected by the amount of pressure that is used to apply the adhesive to the surface.

To avoid problems in the future, we have prepared a small list of recommendations for you:

• Do not carry out the gluing procedure if your hands are dirty. Wash off the sebum from your fingers, otherwise it can “leave traces” in your work.
• Both protective glass and film are best replaced in a damp, ventilated area. These precautions will help you avoid dust getting underneath the surface.
• Do not apply much force when replacing the glass, otherwise you risk breaking it.
• You can use Dust Remover to remove excess dust.
• To remove bubbles, you can use the most common medical syringe. Pass the “spout” and pump out the air from under the surface of the film or glass.

Shear strength is a measurement of the force required to pull a pressure sensitive material parallel to the surface to which it has been attached. Our friendly customer service representatives are ready to answer all your questions and meet any of your needs. We'd love to hear from you!

But if you had to fish your prized, immaculate Eames chair out of your pocket or purse 20 times a day, maybe you can do it. Disguising the design is a small price to pay for protection from harm. Simply using a glass protector eliminates about 90% of the reasons why everyone thinks there is a need for a case that is supposed to protect the screen from breaking.

The modern market offers every buyer a huge number of different models of gadgets, smartphones and other similar devices. Despite the fact that the display is made reliably, the buyer decides to extend its service life by purchasing protective glass. This is due to the fact that over time we do not treat smartphones as carefully as at the first stage. Today we will talk about how to clean the protective glass from the inside and what products we will need for this.

Most people should not consider the case. The point is that you don't have to use case. Maybe you think of the case as a fashion accessory, or maybe you have such a super-active lifestyle that any slab of glass and silicon will be instantly destroyed unless it's buried in a waterproof block of rubber and plastic .

But most people don't need to consider the case. However, from our personal experience We can confidently say that the process is relatively straight forward and can be done correctly by anyone, regardless of your level of experience with suitable screen protectors. In this guide, we'll walk you through the installation process step by step, explaining in detail what to do and what to expect at each stage of the application. However, if you prefer to view this guide in video form, please feel free to watch the video above.

What is safety glass?

Safety glass is modern look display coatings on smartphones and gadgets. It is made using a chemical method based on tempered glass.

Important! Compared to ordinary film, it is several times thicker and harder. That is why, if this coating is present on the phone, it protects the screen from fingerprints, scratches, moisture and even shocks. Despite these characteristics, the brightness and color do not change.

Take everything out of the box and organize it

Place the phone in the plastic tray and rinse thoroughly

Once you've placed your phone in the guide tray, you'll need to grab one of the three alcohol wipes provided and start cleaning the display. Be sure to pay special attention to the sides, especially if your device has a curved display, as this will ensure a proper fit once completed. After this step, you will now want to take the microfiber cloth that comes with the protector and provide additional cleaning to your phone's screen.

Due to the multi-layer coating, the thickness of the glass varies from 0.25 mm to 0.5 mm, the composition of which is as follows:

• The first layer is always silicone based. It sticks to the display.
• The next layer is the fastening layer. It is this that prevents fragments from spreading if a crack or mechanical shock occurs.
• The third layer of coating is an anti-reflective film. It preserves the visibility of drawings on the screen if straight lines fall on it sun rays or other bright light.
• The protective layer protects against shocks, falls and other mechanical damage.
• The very last layer is the oleophobic coating. It provides protection against moisture, fingerprints and makes the screen easy to clean.

At active use the top coating, which ensures the reliability of the unit, becomes dirty. This is when the question arises of how to clean the protective glass of your phone. How to do this and what is required for this, we will consider further.

Place the top of the plastic tray on top of the plastic body

Now you'll be ready to use the dust removal stickers to remove all final characteristics dirt and dust, leaving the screen in perfect condition for use. Now that your display is well prepared, you now want to take the top of the tray and place it in place above the screen. You'll feel the lid fit well when you're in place, so you'll know when you've got it right. When you're happy, you can press the alignment stickers to keep them in place.

What is a protective film?

Protective films have been available on smartphones for quite some time. It is not a high-tech product and is present on every gadget. This product is characterized by the presence of three layers:

• the bottom one sticks to the screen;
• medium absorbs ultraviolet radiation and provides brightness when exposed to bright light;
• The top one is responsible for protecting the display screen.

Important! The most important thing for the film is proper gluing. To do this you need to have a little skill, since it may not always work out the first time.

Insert the grommet adapter into the top of the plastic cover

Now take the grommet adapter and place it in the hole on top of the plastic housing. It then holds the adhesive vessel in place, ready to discharge its contents onto the screen. Please note: It is very important to check that your table or table is level at this stage as you will need to ensure that the liquid stays on the phone screen and does not run off the edges. You can do this quickly using the included glue. Putting it on its side will give you a good indication if you need to move to a flatter surface.

All protective films that are present on the market of smartphones and gadgets are divided into three types: matte, glossy and mirror. Let's take a closer look at each type to understand whether there will be a difference in cleaning:

• The matte film absorbs glare and also hides fingerprints. The main disadvantage is that it degrades image quality. However, its cost is very low. Many craftsmen classify such film as technological and advise not to make the final choice on this product.
• Glossy protective film is the most popular among similar products. The main disadvantage of this coating is that it is easy to damage. The film strongly reflects light, scratches and other mechanical damage quickly appear on it. Fingerprints are also visible.
• Mirror film is the least popular among similar products. The peculiarity is that when the screen goes dark, it can mirror the image. However, the quality and brightness of the screen changes when this coating is applied - this is the main disadvantage.

All of the above films become dirty, and this is especially noticeable when dust gets under the coating. We will now look at how to clean the film for your phone.

If he rolls, you need to find a new place to use the defender. Warning. If for any reason you released the glue from the container onto the phone screen and it disconnected from the phone display due to the surface not being flat, please do not attempt the installation again. At this point, you will need to clean the phone and request more glue before you can continue. If you try to go ahead and apply a screen protector, it will most likely fail and you will be left without a protected phone.

How to clean the protective glass on your phone?

If you are thinking about how to clean the film for your phone, then ordinary tape, or as it is also called, adhesive tape, will help you. To do this you need:

• take wide tape;
• cut a piece of approximately 30-40 cm from it;
• glue it to the surface so that the sticky side is on top.

After this, stick the protective film with the sticky side to the tape. Then very carefully and slowly peel off the film immediately. All the dust that was present on this product will go away, and the sticky layer will remain.

Remove the large screw cap and insert the adhesive bottle into the adapter

The adhesive bottle has two ends, so be careful to remove the right end first. You'll know what to remove first since it's a bit larger of two screw caps. Once the cap is removed, you can freely screw the bottle into the spigot adapter. Don't worry about spills as the liquid won't be released until you remove the second cap, which should be done after the bottle is screwed into place.

Remove the entire top plastic section and add alignment guides

By removing the second and smallest cap, the adhesive will work freely on your phone's display. You'll want to leave this on for about 30-40 seconds to make sure all the liquid is gone and on the phone. You can then remove the entire top of the kit, leaving you with a screen holding the adhesive blob in the center.

Important! If you need to remove scratches from the top of the protection, then polish the defects with felt, a soft cloth, or using auxiliary products - white toothpaste, GOI paste or olive oil.

Another way to clean protective glass with inside is to use water and soap. To do this:

• You need to remove the contaminated product from your phone.
• Wash away all dust particles in hot water.

• After this procedure, you should lather the sticky layer very well with soap. For this it is better to use two or three layers.
• After this, take and rinse the soap solution under water. Make sure that the water drains from the film.
• Then we glue the film onto the cleaned, wet display using an ordinary credit card.
• We make sure that no air bubbles or other fluff gets in.

Remove the protective film from the screen and begin lowering it onto the guides

Now you will need to line up the tabs on the top and bottom of the rig body before cutting it into the level panel like the blue tape on the side. From remote top part you can now turn your attention to the screen protector. You will need to carefully peel off the plastic protective film, removing the blue tab. Do not touch this side of the protector as you do not want fingerprints or dirt to be removed after application.

Carefully remove the tablet guide and leave for 60 seconds

Now you will want to take the protector and slowly lower it into place, starting with the left side first, and lower the right side onto the guide to ensure alignment without touching the adhesive bubble. Once you are happy with your alignment, slowly remove the level bar until the defender falls off. This will cause the protector to snap into place and allow the adhesive to spread throughout the tread.

Today we looked at all types of protective films and talked about how to clean the protective glass from the inside. As you can see, this is quite simple to do. Now you don’t need to throw away the old film and stick a new one, because you can simply clean and re-stick the same protection on the gadget. Use our tips and make your life easier!

What is safety glass?

You should leave your phone in this state for about 60 seconds to a minute and a half, as this will allow the protector to cool and adhere properly. Warning: Be careful not to apply too much pressure when cleaning during the cleaning and curing stage. Excessive pressure, especially on the edges of your device, can cause the adhesive to become compromised and cause the protector to come loose at the edges in the future.

Cure the protector for another 10 seconds

Clean the tread again with your last alcohol wipe.

Often the problem is caused by peeling around the edges of the display. The upper left corner is most susceptible to this problem. Although the right one quite often does not remain on the sidelines. The situation is not the most pleasant, but it can be corrected on your own.

Restoring the sticky layer of protective film on your phone

There are several options to resolve the problem. Each user makes their own choice in favor of a specific one based on personal capabilities and passions.

Some precautions when handling gadgets cannot be called unnecessary. Even novice users are well aware that the touch screen is one of the most expensive elements, the replacement of which costs a considerable amount. The strength of the device is significantly increased by special glass that protects it from minor mechanical stress. Many owners mobile phones prefer to glue the protection themselves, without contacting service center. As a result, after such attempts, noticeable air bubbles appear, which spoil appearance screen. Let's talk about how to get rid of such troubles, what exactly can be done for this regular user without technical knowledge.

Despite its apparent simplicity, each of the procedures described above requires careful preparation. Please note that work should be carried out in an environment of maximum sterility, with minimal dust.

Is it possible to re-glue the protective glass on a smartphone?

At home, it is advisable to use the bathroom to solve this problem - in rooms with a high level of humidity there is significantly less dust. Do not exert significant physical effort during each action. The work is delicate, does not like haste, and requires caution. Be sure to remove the fat from your hands, otherwise serious problems may arise.

The protective glass comes off at the edges
Why does the protective glass come off?
What to do if the protective glass comes off

Tempered glass is designed to further protect the display and prevent it from being destroyed if hit or dropped. And the accessory provides the desired result without much difficulty. But only if it is properly glued to the base.
If glued incorrectly, the glass may partially peel off. Dust and dirt begin to accumulate under it, and the smartphone itself abruptly loses its original aesthetics. And its security raises very serious doubts.
How to solve the problem? What to do in such a situation and what may be required for this? Let's consider the issue in more detail, and also study those aspects that need increased attention.

In the first case, you will need to purchase in advance special remedy.

Why does the protective glass on my phone come off?

We are talking about Border Liquid gel, which is offered by a Chinese manufacturer. It has a transparent base and ensures a good connection between the edge of the glass and the surface of the screen. Just apply the gel to the edge and press it tightly to the base. The procedure is not particularly complicated, and its implementation will not take much time.
But if a corner has come unglued, you can make do with improvised means. In this case, you will need a napkin, glycerin (vegetable oil) and a thin brush. The composition should be carefully applied to the edge, completely filling all existing voids. Extra remedy It is better to remove with a napkin. The thinner the area that was initially exfoliated, the higher the quality of the work performed.

Why does the protective glass come off?

The reason for peeling can be different. Moreover, often there is not one provoking factor, but several at once. It all depends on the accuracy of the individual user, the conditions of use of the smartphone and the person’s thriftiness.

The most common problem is:

• The presence of chips and defects on the glass itself;
• Insufficient cleanliness of work surfaces before gluing;
• Sudden temperature fluctuations when using the iPhone;
• Moisture or air gets under the glass;
• The base is clogged from the inside with foreign particles.

Although situations with incorrectly performed gluing occur quite often. Here we are talking about the lack of proper experience and ignoring the basic rules of gluing.

What to do if the protective glass comes off

If the protective glass has come off, there may be 2 reasons for this:

• Preparation and gluing were carried out with violations;
• The glass itself is not compatible with specific model smartphone.

In the first case, you can try re-gluing. And here you should strictly adhere to the tips and recommendations that experts offer.

The work itself is carried out as follows:

• The display is wiped with a special rag to completely remove all extraneous traces;
• The air flow blows away the smallest particles of dust from the surface;
• The screen itself is degreased with a special liquid for the most durable connection with the installed coating;
• The location of the glass on the display is determined and the film applied to one of its sides is removed;
• The glass is placed on the surface of the screen and gently pressed against the base;
• The remaining air from below is squeezed out to the edges to ultimately obtain the highest quality protection without the least visual defects.

At this point the work is considered completed. If the glass is not suitable initially, then it is more advisable to immediately replace it with a more suitable one. suitable option. It can be universal or designed specifically for a specific phone.

I recorded the video for those who really need it and may find it useful. This advice is not for “professionals” who tear off glass with their fingernails. Personally, I don’t use protective glass, but change the touchscreen on my phones, because...

The protective glass on the phone comes off

Touch feedback is better than through protective glass. 2 more tips: 1) The adhesive tape must be glued flush with the side edges of the protective glass, so that when peeled off from the table, the glass does not break due to being held on the sides with adhesive tape. 2) Glue the glass or protective film It’s best with a fan, then there will definitely be no dust in the gluing area (well, that’s my opinion). The main thing is that you will be able to remove them several times without damage. Good luck to everyone!

Cat Love: Thank you, it helped, but my hands are crooked and the bubbles remain. But thank you, it really works, I thought that tape wouldn’t help, but it did. OVERALL THANK YOU

Alexander Batkov: Please tell me, I peeled off the glass, it was all cracked and there was some kind of glue there, since the glue has deteriorated, can I stick it on without glue? Thanks in advance!

Ateev Alexander: Not ideal but will fall

Ateev Alexander: I tried it too, it worked the first time

Makar Trukhanov: the best！！

Ruslan Gutsol: THANK YOU))) YOU HELPED VERY MUCH)))))) THANK YOU THANK YOU THANK YOU)

JOHN 1000: Specifically, I messed up the new 3D protective glass when I tried to clean it. New but there was dust. I thought I bought everything in vain. And my surprise when the tape cleaned it amazingly well. I thought the glue on the inside of the glass would get worse, but no, everything holds up great. Thanks to the author of the video!!! Really works as it should!!! All the best! 🙂

Denis K:A speck of dust will find its place under the glass

Ilya Budagovsky: Yes, the dark idiot installed the screen for 2,500, and saw the defect when he had already glued the protection

Backaulet Kambar: The tape helped a lot. At first I was a fool for using a rag and couldn't clean in different ways but I never thought about the tape. Thank you!

Koteika: And glue it in the bathroom

Koteika: Scotch tape tip. Try just sticking it on the glass first different types and see whether traces remain or not. Take the thinnest fishing line.

Alexey Kalinichenko: Thank you everything is fine))))))

Siniy Bocman: Nice job, it helped the 5th time (I re-taped the film) respect!

Yulia Yula: This tape probably cures cancer...

Pavel Sachok: Useful information

VitoKarlioni: kakōi skochi nuzen

Gleb Sunyaykin: The video is very boring, but useful, watch it more often, otherwise you might fall asleep!

Maxim Mikhailov: it is necessary to fill the glass with polyurethane foam so that there are no dust particles

Roman Kostin: There was a similar problem on a smartphone; when installing it in a bumper or book case, the protective glass or film peeled off (their thickness does not matter). It was annoying. I solved the problem. I took a drill, installed an attachment (the design features of the attachment were a nail instead of a head there was a stone sharpener in in the form of a barrel with a diameter of 14 mm, used for chamfering in holes and on small parts). On the bumper along the perimeter, even in the video, you can see a small chamfer, which, when bent at the corners, stands out most of all, having first processed the corners from which the peeling mainly occurred with a nozzle, I decided process the entire chamfer around the perimeter. The peeling has stopped. The smartphone is holding tightly. Try it. I wish you good luck.

Video on this topic

Some precautions when handling gadgets cannot be called unnecessary. Even novice users are well aware that the touch screen is one of the most expensive elements, the replacement of which costs a considerable amount. The strength of the device is significantly increased by special glass that protects it from minor mechanical stress.

Many mobile phone owners prefer to glue the protection themselves, without contacting a service center. As a result, after such attempts, noticeable air bubbles appear, which spoil the appearance of the screen. Let's talk about how to get rid of such a nuisance, and what exactly an ordinary user who does not have technical knowledge can do for this.

Ways to eliminate air under protective glass

We warn you once again that we are talking about ordinary procedures, there is nothing complicated about them. So, if air gets under the protective glass, it is recommended to take one of the following actions:
1. In a number of simple cases, an ordinary piece of flat plastic can help. To solve the problem, a credit card or driver's license is suitable, and you should use it to try to get rid of the bubbles that have appeared.
2. If you fail, don’t despair. Get a small needle, which you will need to carefully pry up the edges of the protection. Use a needle in places where there is a noticeable accumulation of air impurities. After the air has been removed, press the protective element firmly against the gadget screen.
3. A standard hairdryer can help. You need to warm up your smartphone a little for a few minutes. Under no circumstances should you bring the hair dryer close! The equipment must operate at a distance of 25-30 cm! After completing the event, place the electronic product on a flat surface under a press of several heavy books. After about 6-8 hours, all that will remain of the air bubbles is a memory.
4. Subject to availability large quantity swelling, it is worth resorting to a more radical method. It is quite possible that the air under the protective glass will disappear after the protection is completely removed. After this, apply a strip of tape to the glass surface, which will transfer all small debris. Then install the glass accessory in place.

Despite its apparent simplicity, each of the procedures described above requires careful preparation. Please note that work should be carried out in an environment of maximum sterility, with minimal dust. At home, it is advisable to use the bathroom to solve this problem - in rooms with a high level of humidity there is significantly less dust. Do not exert significant physical effort during each action. The work is delicate, does not like haste, and requires caution. Be sure to remove the fat from your hands, otherwise serious problems may arise.

Try to glue the glass correctly from the beginning

To avoid problems and avoid the need to remove bubbles under the film on the phone, try to immediately stick the protective coating correctly. Understand that it is better to perform a task well initially than to try to correct mistakes later. We will provide useful information, which will help avoid problems when installing a thin accessory.
Don't forget to delete greasy spots from the surface of the screen. Be sure to use a liquid with a high alcohol content to achieve this goal. Do not forget to wear disposable medical gloves that do not restrict movement and allow you to perform precise work. Remember that the sticky side of the accessory must never be touched. In this case, the adhesive parameters of the coating deteriorate significantly. Ideal option Among professionals, the presence of a suction cup is considered, it significantly facilitates the process of completing the task.
If there is any doubt about own strength, take your smartphone to specialized service. Any master is able to solve such a simple problem for a modest reward. By the way, the quality of work largely depends on what kind of glass you purchased. Practice proves that failures occur much more often when trying to stick cheap copies. Therefore, never skimp on protection, buy only expensive copies.

The protective glass comes off at the edges
Why does the protective glass come off?
What to do if the protective glass comes off

Tempered glass is designed to further protect the display and prevent it from being destroyed if hit or dropped. And the accessory provides the desired result without much difficulty. But only if it is properly glued to the base.
If glued incorrectly, the glass may partially peel off. Dust and dirt begin to accumulate under it, and the smartphone itself abruptly loses its original aesthetics. And its security raises very serious doubts.
How to solve the problem? What to do in such a situation and what may be required for this? Let's consider the issue in more detail, and also study those aspects that need increased attention.

The protective glass comes off at the edges

Often the problem is caused by peeling around the edges of the display. The upper left corner is most susceptible to this problem. Although the right one quite often does not remain on the sidelines. The situation is not the most pleasant, but it can be corrected on your own. There are several options to resolve the problem. Each user makes the choice in favor of a specific one independently based on personal capabilities and preferences.
In the first case, you will need to purchase a special product in advance. We are talking about Border Liquid gel, which is offered by a Chinese manufacturer. It has a transparent base and ensures a good connection between the edge of the glass and the surface of the screen. Just apply the gel to the edge and press it tightly to the base. The procedure is not particularly complicated, and its implementation will not take much time.
But if a corner has come unglued, you can make do with improvised means. In this case, you will need a napkin, glycerin (vegetable oil) and a thin brush. The composition should be carefully applied to the edge, completely filling all existing voids. It is better to remove excess product with a napkin. The thinner the area that was initially exfoliated, the higher the quality of the work performed.

Why does the protective glass come off?

The reason for peeling can be different.

Moreover, often there is not one provoking factor, but several at once. It all depends on the accuracy of the individual user, the conditions of use of the smartphone and the person’s thriftiness.

The most common problem is:

• The presence of chips and defects on the glass itself;
• Insufficient cleanliness of work surfaces before gluing;
• Sudden temperature fluctuations when using the iPhone;
• Moisture or air gets under the glass;
• The base is clogged from the inside with foreign particles.

Although situations with incorrectly performed gluing occur quite often. Here we are talking about the lack of proper experience and ignoring the basic rules of gluing.

What to do if the protective glass comes off

If the protective glass has come off, there may be 2 reasons for this:

• Preparation and gluing were carried out with violations;
• The glass itself is not compatible with a specific smartphone model.

In the first case, you can try re-gluing. And here you should strictly adhere to the tips and recommendations that experts offer.

The work itself is carried out as follows:

• The display is wiped with a special rag to completely remove all extraneous traces;
• The air flow blows away the smallest particles of dust from the surface;
• The screen itself is degreased with a special liquid for the most durable connection with the installed coating;
• The location of the glass on the display is determined and the film applied to one of its sides is removed;
• The glass is placed on the surface of the screen and gently pressed against the base;
• The remaining air from below is squeezed out to the edges to ultimately obtain the highest quality protection without the least visual defects.

At this point the work is considered completed. If the glass is not suitable initially, then it is more advisable to immediately replace it with a more suitable option. It can be universal or designed specifically for a specific phone.