• How to set the time on a mobile phone. How to set the time on your tablet

    You usually find out that the clock on your mobile phone is behind when you are late for something, for example, for a train. In the 21st century, it is unacceptable for your watch to be fast or slow by more than a minute.

    And if there are no complaints about wristwatches, then smartphones are simply obliged to show exact time. But as practice shows, this is not always the case. The clocks on the phones are just as “fragile” as the old clocks at my grandmother’s in the village.

    How is the accuracy of electronic watches determined?

    First of all, tuning accuracy and stability crystal oscillator(resonator). The frequency accuracy and stability of the latter is usually 10 -6. Ideally, at this value, the clock advances a little more than 30 seconds per year.

    In practice, stability is slightly worse, since the resonator frequency is affected by environmental parameters (temperature, pressure) and the generator supply voltage. The generator also includes other elements, for example capacitors, the parameters of which are more dependent on external influences. As a result, the clock can run up to 30 seconds per month.

    Improving watch accuracy

    In professional devices, for example in transceiver equipment satellite television, the stability of generators is much higher and can reach values ​​of 10 -12.

    Therefore, a natural way to take the carrier frequency as a standard arises: external source signal. And use it as a reference for our generator. There are two possible ways: hardware and software.

    In the first case, the clock generator frequency is adjusted to the carrier frequency of the GSM transmission tower. In the second case base tower GSM transmits accurate time signals and the operating system adjusts the clock.

    But as domestic reality shows, on mobile operators there is no hope. Several times I found myself in a situation where the time on the clock jumped several hours. After which I had to disable the option to use data provided by the network.

    Time servers

    Since a smartphone is a computer with Internet access, the easiest way is to synchronize the clock with reference time servers. IN standard firmware this option is not available. But the problem can be solved by installing additional software. There are several such programs, and I liked one - ClockSync from a “domestic manufacturer” :-).

    ClockSync synchronizes system time Android devices via the Internet via NTP protocol with exact time servers. The program is useful if the operator cellular communications does not support NITZ (automatic time synchronization) or sends incorrect values, also in case the phone clock is too fast or behind.

    Works on tablets. Relevant if you need an exact time. Especially on devices without a GSM module.

    When using a gadget - a phone or tablet - based on Android, some users have problems setting the date. The problem is easily solved.

    Hello, today we will touch on the topic of how to change the date in Android gadget, such as a phone or tablet. For some reason, many people have problems with this.

    To start working on a smartphone or tablet, first of all, you need to open the device menu. To do this, you need to click on the button located at the bottom of the screen in the middle.

    You need to scroll to the left of the screen and find the “Settings” section, which has a gear icon. Here you need to find the “Date and Time” item. And in turn you need to click on it. In the LG G2 smartphone mini given The item is in the “General” section, and on the tablet it is in the “System” subsection.

    Settings

    After last action you will find yourself in the menu. In it you can set the date, select the date format and set other settings. Here you will need to select the “Set date” item and set the year, month and date you need. At the very beginning, for ease of perception, it is preferable for you to install required format dates are preferred.

    Initially costs digital format, in which the year, month, and day are in order, although there are different variations to choose from. Then you will need to open the “Date” section and in the future you will need to scroll through all the columns sequentially, thus setting the correct values. Then click "Finish" for the configuration settings to take effect.

    It's good to know that on some android versions You will not be able to change the date, as it is set automatically. The “Set Date” element is gray in color. In such a situation, you will need to uncheck the “Automatic date and time” item.

    Then everything will start to change. On a tablet, in order to gain the ability to change the date, it is important to disable its synchronization over the network. To do this, uncheck the box next to the “Network date and time” item. From model to tablet model and in different versions Android OS location of menu items and their names may differ.

    Mismatch between device and operator

    Also, another option may be that the time that is set on the phone by the manufacturer does not match the date and time, installed by the operator. Quite often this can happen with the Tele2 network and in these cases you will need to remove the SIM card, then go to recovery and reset and then reset the settings.

    Then again in the time settings, you will need to uncheck the items: “Network time zone”, “Network date and time”, and set the time zone you need just below. Reinsert the SIM card and set your date and time.

    Instructions

    On a Series 40 platform device, first press the one of the sub-screen keys above which the word “Menu” is displayed on the display. If it is not shown above any of them, press the middle joystick button. Find the “Date and Time” item in the menu structure. Its location depends on the device model, for example: “Settings” - “Options” - “General” - “Date and time”.

    To change the value of any input field, move the pointer to it, and then press the middle joystick button. Enter a new value using the keyboard, and then press the one of the sub-screen keys that corresponds to saving the information (its name depends on the phone model).

    If the Auto Time Update field is set to On, your phone's clock will automatically sync with your base station. Despite the cancellation of the transition to winter time, some of these stations are still configured in the old way, so an error of one hour is possible. But the minute readings will always be very accurate - so much so that periodic adjustments will not be required at all.

    In the phones in the operating room Symbian system Set the date and time in the same way. The only difference is the way the menu is called up. Instead of one of the sub-screen keys or the middle joystick button, use a separate key for this, which depicts a solid circle and a hollow square connected by two arcs.

    Method for setting date and time in all phones on the platform Windows Phone 7, including the Nokia Lumia series, is unified. First, scroll down your desktop to the tab where the Settings icon is located. It looks like a white gear on a red background. A menu will appear. Select the “Date + time” item in it. Change the desired settings. To turn on or off automatic synchronization, respectively, check or uncheck the “Installed automatically” checkbox.

    Sources:

    • how to set time on nokia

    Modern man without a mobile phone one feels like without hands: a mobile phone is a calendar, a clock, a means of communication, and a player. That's why correct setting phone will allow you to use it as efficiently as possible.

    Instructions

    Turn your . If you have just purchased it and have never turned it on, then upon loading a message will appear asking you to enter the current date And time. Use the keyboard to enter these values ​​and confirm your entries. Similar actions will need to be performed when replacing the SIM/battery.

    Set the date on your mobile phone Nokia. To do this, go to the menu, select “Settings”, go to “Date and time", then select "Set Date and Time". After that, make the necessary changes to the mobile date and time values. Then click "Save" and exit the menu.

    Change date And time on Windows based Phone. Usually in these phones the date and time is set by mobile. You can set these values ​​manually. Disconnect your phone from your PC, then open the desktop, swipe left on the screen, go to the list of applications, then go to Settings. Select Date+Time. Uncheck Set Automatically, then set the time zone, date, and time as desired.

    Nowadays everything more people retire from use wristwatch, preferring smartphone watches to them. However, the phone date and time may be lost when the device is rebooted or due to a system error. In such cases, you have to change the settings yourself. To do this correctly, let's look at some features of date and time settings on Android.

    Inaccurate date and time on Android may result in termination or incorrect operation some applications. This happens because programs automatically check the expiration date of their license with the date set on the phone. And if something doesn’t add up, then they simply stop working.

    How to change date and time on Android

    Now let's move on to manual setting time parameters.

    Video: How to set time and date on Android

    Possible problems when setting the time and their solutions

    After setting new time settings, you may encounter two problems:

    • time settings are constantly reset;
    • The message “An error occurred in the Settings application” appeared on the device screen.

    The following methods will help you correct these misunderstandings.

    Reboot

    First try restarting your smartphone. This action will restart all processes, and perhaps the errors will disappear and the time settings will be saved.

    Auto-sync

    If rebooting the device did not work properly, you need to enable auto-sync. This feature allows the phone to automatically update its time settings when connected to the Internet. To enable auto-sync, follow these steps.

    Installing 360root and ClockSync applications

    If your phone does not have an auto-sync feature, you will need to follow these steps.


    Factory reset

    However, even after automatic synchronization is enabled, the time may still change on its own or generate an error. In this case, you will have to reset your phone to factory settings.

    How to select, set, or add a new time zone

    To find out the time zone of your region, go to the website http://www.gmt.su/city-time/country/Russia/ and find the city closest to you in the list. On the right side of the page you will see time zone information. For example, in Kaliningrad it is GMT +02:00. You will need to select this information in the settings of your phone.

    Sometimes even the simplest operations cause minor difficulties for users. For example, novice owners of Android devices often wonder how to change the date in Android? The thing is that this does not require any special knowledge. And if you have ever held a mobile phone in your hands, you can always set the time and date in your smartphone. Let's take a look at how date and time are configured on mobile devices.

    Manual date setting

    How to change the date in Android manual mode? We assure you that for this you will not need superuser rights, mysterious commands and access to engineering menu. Android is very simple operating system, so changing the date is as simple as possible here - just go to the settings. Manually setting the date and time is necessary on devices not connected to the network, since there is simply no other synchronization here.

    In order to change the date on Android, and at the same time adjust the time, you need to visit the system settings. This is done in two ways:

    • Slide the top curtain and click on the gear symbol;
    • Go to the main menu, select the “Settings” item (also in the form of a gear symbol).

    At the bottom of the list we will see the “Date and Time” item - you simply cannot miss it.

    Please note that in some Android devices the settings menu is modified and divided into several tabs - the item for setting the date and time in such devices is located in the “Options” tab. In some smartphones, the settings shortcut is displayed directly on the desktop.

    Having entered this point, we will see a lot of interesting things. If your smartphone or tablet does not have a SIM card installed, automatic synchronization will not be possible. In order to set the correct time and the correct date, you must uncheck the “Auto-detect time” checkbox. After this points manual installation time and current date will become available. Next, click on the “Set date” item, select the current date, current month and the current year, click OK - now the date is set correctly.

    On next stage set the time. To do this, you need to tap on the “Set time” item - set the hours and minutes, click on the OK button. Next, you need to uncheck “Auto-detect time zone” and select your time zone manually. If the time is wrong, correct it.

    The problem with time zones often causes a lot of inconvenience to domestic users - in our country they either cancel the transition to winter/summer time or play with the number of time zones. As a result, smartphones and computers have problems setting the correct time.

    Next, you can select the time display format - it can be 12-hour or 24-hour formats. By checking the box, you will select a 24-hour display format, and by unchecking the box you will switch to a 12-hour format. Below we select the date display format - in Android settings There are several ways to display the current date, differing in the location of the year, month and day.

    If you don’t know what to choose, stop at the “Local” option; this format implies displaying the date in the following order - day, month, year (format accepted in Russia).

    Automatic date and time setting

    How to change the date in Android automatically? This operation implies that information about the current date will be taken from the mobile network - the correct time and time are constantly broadcast there. correct date. Automatic setup will only work if a SIM card is installed in the device. As soon as your smartphone or tablet is registered with cellular network, the necessary data will be read from it.

    To enable automatic settings date, you must check the “Auto-detect time” checkbox - in this case, the “Set date” and “Set time” items will become unavailable. If the network does not set the time zone correctly (or your device does not know about the problems with time zones and summer/winter time in our country), uncheck the “Auto-detect time zone” checkbox and select it yourself.

    The correct time zone for Moscow time is Moscow time zone GMT +03:00. Select the appropriate value for your region from the drop-down list.

    We set the most accurate time and exact date

    Now you know how to change the date in Android - to do this, you need to visit the system settings and use the “Date and Time” item. Data installation is carried out in Android manually or automatic modes. If you want to get the most accurate time, you should select automatic detection.

    But what to do if the accuracy of the mobile network is not enough or your device cannot communicate with mobile networks? In order to obtain the most accurate data about the current time and current date, you must use third party applications. The most powerful application for automatic time synchronization is ClockSync from developer Sergey Baranov. Despite its more than modest size, the utility has decent functionality.

    Here we will find:

    • Automatic time setting with root rights;
    • Automatic time setting without root rights;
    • High precision mode;
    • Selecting a server for time synchronization;
    • Setting the request interval exactly in time;
    • Battery saving mode;
    • Detailed statistics;
    • Time zone database (will be useful for older smartphones);
    • Automatic time zone detection;
    • Function for updating system data about time zones.

    Install the application and get the most accurate time on your watch. Also, you will not need to worry about setting the date if for some reason it goes wrong.

    The function of updating system data on time zones will be useful to many Russian users whose smartphones and tablets do not know about the absence of a summer/winter time change and about changes in time zones. However, this function requires root rights to work.

    Read more: