• Command for binding buttons. Voice chat CS:GO How to bind a button to mute a microphone

    Hello buddy! In this article we will look at CS GO voice chat. Let's look specifically at its settings and rules of good manners. Well, now let's get down to business.

    Microphone

    First of all, you need a good microphone. If you don’t have a microphone or its quality leaves the best, then I recommend buying one. Communication in any multiplayer game is the first step towards victory. If you or your ally are not informed in time, then getting shot in the back of the head will be a completely logical end to the game.. Be careful when buying budget equipment under $15. After all, there is a fairly high probability that the sound quality of the microphone will be disgusting. And such a microphone is unlikely to last long.

    Always check your microphone first. To do this, you can use the standard Windows voice recording program. To do this, go to settings->System->Sound. Make sure there is no noise and your voice can be heard clearly enough.

    CS GO voice chat bind

    One of the important aspects of CS GO voice chat is the microphone bind. Throughout the game, situations constantly arise that you need to inform your allies about. Therefore, it is vitally important to bind the microphone button to a convenient and accessible key. As an example, many players often use unused keys on their mice for this. By the way, on our website you can read about that and.

    To bind the button that suits you, go to the CS GO settings and select the appropriate item:

    It is very important not to forget to enable microphone activation with the key! This is the main reason why voice chat does not work in CS GO.

    CS GO voice chat commands

    You can also use the following commands to configure cs go voice chat:

    bind "MWHEELUP" "voice_enable 1"

    bind "MWHEELDOWN" "voice_enable 0"

    As you probably understoodMWHEELUP/MWHEELDOWNYou can replace it with any key that suits you.

    voice_scale "1"

    This parameter sets the gain/attenuation factor for the volume of CS GO voice chat.

    Rules of good manners in the game

    Using a microphone

    After activating the voice chat button, you should start talking after about half a second. Likewise, you should turn off your microphone half a second after completing your message. All this is necessary so that words are not swallowed at the beginning and at the end of your speech.

    But you shouldn't leave the microphone on all the time. I think few people are interested in what is happening in your room, unless of course you are a busty streamer with a sexy voice. In addition, it will interfere with allies trying to listen to enemy movements.

    Well, of course you should adjust the microphone volume.

    Language

    Unfortunately, in CS GO there are no principles for searching by language. For this reason, your team members will always use a wide variety of languages. But the recognized international language is English. Accordingly, it would be good form to use it.

    What not to do in voice chat

    • Scream
    • Swearing or insulting players
    • Have long conversations
    • Play music
    • Command people after your death

    What to say in voice chat

    • Enemy Locations
    • Who died (especially if the player had AWP)
    • Need for help
    • Tactics
    • Need a weapon drop
    • Bomb location
    • Congratulations to allies at the end of the round/match

    Conclusion

    I hope this article not only helped you, but also reminded the community of the rules of good manners. The game didn't shine with politeness anyway. And after the game switches to a free-to-play basis, all this may worsen even more. Well, see you soon, don’t forget to visit our website often!

    For most players who spend a lot of time playing CS 1.6, it is well known that in order to play effectively in teams, you not only need to thoroughly master the game skills, but it is also important to have high-quality communication. If you think about it, few people have time to write or read chat while playing.

    Of course, when playing with friends, you can use Skype to communicate, but what if these are not familiar people, because victory depends on teamwork, and without communication it is much more difficult to do this. Of course, in such cases there must certainly be an internal connection. We provide introductory information about the settings.

    • Set up microphone, first of all, what needs to be done is to connect the microphone to the computer into the desired connector, it is better when the microphone comes with headphones, nothing is simpler.
    • Set up a microphone in Windows XP, by going to the Volume menu (speaker at the bottom of the screen where the notification area is), show the microphone in the properties by checking the appropriate box. Next, set the microphone volume and uncheck “OFF” and “MIC BOOST” (in the additional parameters settings). After that, we test the microphone.
    • Set up a microphone in Windows 7, go to the “Start” menu, then “Control Panel” (Hardware) and then you can adjust the microphone, sound, levels and performance in general. For a more detailed study of setting up and setting up a microphone in Windows 7, you can watch the video.
    • Set up a microphone in CS 1.6, after completing the hardware settings in the operating system, confidently launch the game, where in the options, having found the “Voice” tab, mark “Enable voice in this game”, under it you see two volume scales that the player can adjust to yourself depending on sensitivity individually. We reproduce our configured microphone and, if necessary, amplify it using “Boost microphone gain”.

    Setting up a microphone via the console

    Experienced players know that it is impossible to properly configure a microphone without console commands. This means that to change the voice volume level, enter the following console command: "voice_scale x"(where x is the required number).

    The command to reduce all sounds (shooting, walking, etc.) will also be useful; this can be done using "voice_overdrive N” where N is the number of reductions (usually 1 or 2). Also the team "voice_overdrivefadetime x.xxx”, related to the one above, allows you to adjust the time of the weakening effect.

    There are other console commands for setting up the microphone and making the game easier:

    • Reproduces speech.
    • Smoothes out the voice.
    • Reduces noise.
    • Time for speech to fade.
    • Function to enable or disable speech.

    After completing such settings in the game when you press the button "L" A speaker appears in the bottom corner of the screen and you can be heard.

    Several other audio problems

    The microphone has stopped performing its functions, and you can’t hear the others, but you can see speech signals on the screen of other gamers, then perhaps you have a version of the game with modified voice codecs, the solution would be to install VoiceCodecFix.

    Check if your microphone is connected to your computer correctly. Connect it to the desired connector; in most cases, this is the so-called mini-jack (3.5 mm diameter) or a USB port. If these points do not help, then the problem may be with the microphone or sound card drivers. Drivers play a major role in the normal functioning of audio devices.

    Also, the cause of the problem may be other audio programs open such as TeamSpeak or Skype that interfere with the microphone, close them. In many ways, the sound quality depends on the microphone itself; a properly selected, reliable headset will help you get exactly the same gaming experience with a high-quality and tuned microphone.


    This article will talk about how you can bind sounds into games using the program. HLDJ and "troll" other players. Many have seen funny videos on YouTube where supposedly famous personalities played Counter Strike and said different phrases into the microphone, so this article will show you how to do the same. Well, or you can simply bind different sounds, for example, in order to provide information to allies or arrange screamers.

    So, let's begin:
    1) First, download it from the official
    2) Then extract it to a folder on your desktop or wherever is more convenient for you and run hldj.exe


    3) Click on "no"


    4) Click on the “setup” gear on the side


    5) Next, the program asks about searching for games automatically and we click " no"


    6) Click on the plus sign “+” to add a game


    7) Next, select the sound engine " source" and select the key on which the sound will be played, select the folder with the game \common\Counter-Strike: Global Offensive\csgo and select a folder with sounds that can be downloaded from this or found on the Internet.


    8) And as soon as the path is selected, click the “OK” checkbox and again click “OK” and again


    9) In the window that opens, press the triangle - the “play” button


    10) Almost everything is ready, but you need to go to the console and be sure to enter the HLDJ command in CS:GO, enter exec hldj_init.cfg once.
    11) Now let's move on to the sounds themselves. We write la to the console to display a list of sounds and indicate the number of the sound we need and write “bind *any button* *number of the desired sound*” (you should get something like “bind p 12”) (or you can play the sounds one by one “bind any button hldjn "And now when you press this key, the sound you selected should be produced.

    For those who don't understand what this is:


    Well, that’s it! Thanks for taking the time to read the guide!)
    Read more: