• The best free programs for repairing USB flash drives. Software recovery of flash drives and memory cards Silicon Power Recovery of flash drive silicon power 8gb program

    Today we will look at:

    USB drives from Silicon Power have a simple and elegant design. By purchasing such a stylish product, we hope that the miniature storage media will last quite a long time.

    It is very unpleasant when flash drives unexpectedly fail, while the drive contains valuable information that was not duplicated. According to customer reviews, 16 GB USB drives from Silicon Power are the most vulnerable to logical errors and physical influences. Don’t despair right away; in most cases, you can restore the functionality of the storage device and save the information.

    Signs that a USB device is faulty and needs to be repaired or restored

    • Flush is periodically or not detected at all.
    • When turned on, it is detected as a connected device, but a message is displayed that it is not recognized by the operating system (unknown device).
    • Inability to perform file access, read or write operations, and messages are displayed: “no access to the disk”, “disk is write protected”, “insert disk”, “file or folder is damaged. Reading is impossible."
    • Defined as media with reduced or zero memory capacity.
    • The message “Before you can use the disk in the G:\ drive, you must format it. Format?" After several tries, it turns out that "Windows cannot complete formatting."

    Causes of malfunctions

    • Logical – incorrect formatting, deleting and removing a device while recording, transferring or downloading information, incorrect use of a flash drive when watching movies on TV, file system failure.
    • Mechanical - shocks, falls, etc.
    • Thermal and electrical – static electricity discharges, power instability during power surges and overheating.
    • Software and hardware malfunctions in the operation of electronic parts of flash drives.
    • Damage or removal of the driver program for device recognition by the operating system.
    • , written specifically to deliberately remove or distort information.

    Solutions for restoring flash drives

    When restoring the functionality of USB drives, it should be taken into account that in most cases this results in a complete loss of data recorded on them.

    In case of serious logical errors in the file system, the knowledge of computer specialists is needed.

    In case of mechanical, thermal and electrical impacts and destruction, the device is usually not suitable for use. However, if only the body of the flash drive is damaged, there is a possibility of recovering the information in service centers.

    The “driver” program can be reinstalled by downloading it from the manufacturers’ official website using the link Silicon Power drivers.

    As in the previous case, the program is launched without installation through the executable file “RecoveryTool (.exe)”. Screenshot of the start and scanning start screen:

    Before scanning starts, a warning is displayed stating that while the program is running there is a risk of losing data from the media. By clicking on Start, the process of restoring the flash drive begins.

    SoftOrbits Flash Drive Recovery is a program for recovering information from flash drives after repeated formatting. You can download the trial version from the official website softorbits.com.

    The program must first be installed. The launch is carried out through the executable file “frecover (.exe)”. The screenshots below display the processes for starting the trial version of the program, where you select the media to scan, select files to recover, hard drive space for recording them, as well as a preview window for the recovered information:

    To obtain final recovery results, you must purchase a registered version of the program on the Softorbits website.

    Controller firmware

    If the use of the above software does not lead to the expected results, there is a more complex option for restoring flash media - this is the so-called “controller firmware”. This option consists of using special utilities to recover hardware failures of a specific type of flash media using known unique identifiers of a USB device - VID and PID.

    If you carefully examine the window of the running USB Flash Drive Recovery program described above, you can see that the VID and PID values ​​are automatically recognized during operation. If these numbers are entered into the database of identifiers of known flash drives on the Iflash website , It’s easy to find in the table the model of your flash drive from the manufacturer Silicon Power and a utility for restoring it (“flashing”).

    Experiments along the way of using various options for restoring the functionality of your flash drive will certainly lead to the desired results and pleasant personal discoveries.

    24.03.2017

    Almost every person carries with him a USB drive on which various documents, photos or audio recordings are stored. Sometimes it happens that the flash drive is not displayed in Windows or does not allow you to write new information. Similar errors often occur on drives with two memory chips. For the well-known company Silicon Power, flash drives of 16, 32, 64 GB sometimes become unreadable on the computer or the message appears "Disk is write protected". Such problems can be easily eliminated with special programs.

    Causes and symptoms of an error

    In total, there are 5 reasons that may cause the device to malfunction:

    • logical errors;
    • physical damage to parts;
    • electrical overload and overheating of the carrier;
    • Damage to the memory controller firmware;
    • NAND memory wear or failure.

    Logical errors appear when:

    • incorrect formatting;
    • sudden removal of the device during information exchange;
    • Using the wrong file system.

    Physical damage, overheating, or an unexpected power surge most often damages the contacts on the board. They can be restored by soldering. But if the microcontroller is damaged, it cannot be repaired.

    If the controller's logic program is violated, the following problems are observed on the flash drive:

    • not detected on the computer (there is a connection sound, but the disk is not displayed);
    • prohibition on recording new data;
    • no disk access;
    • The drive size is specified incorrectly.

    To restore the device's functionality, you will need to reflash the microcontroller. But after performing this operation, all data from the disk will be irretrievably lost.

    Method 1: SP Toolbox

    Branded programs are most effective for restoring Silicon Power drives. SP Toolbox combines various components for flash drive diagnostics.


    After diagnostics are completed, you can begin to restore the media.

    Method 2: D-soft Flash Doctor

    As a rule, flash drives store important information that you don’t want to delete. To avoid losing it, you can create a disk image. D-soft Flash Doctor allows you to scan drives, create and burn disk images. The software also allows you to restore a flash drive; for this, a full format is performed.


    To perform a restore, follow the instructions:

    1. Select the damaged disk.
    2. Click "Recover media".

    Method 3: SP G50 FW Update Program

    To update the Silicon Power firmware, a special utility SP G50 FW Update Program has been created; it can be downloaded from the official website. Find the section on the page "USB drives" and click download.

    The software is downloaded in an archive, which contains an .EXE file and English instructions for use. After launching the application, a window with a simple interface will appear.

    In the main window it says that before clicking the button "Update" You need to make a backup copy of your data, since all files will disappear after flashing. It will be impossible to restore the information.

    1. Launch the program.
    2. Insert the Silicon Power flash drive.
    3. In the window "Device" The device letter will appear.
    4. If a window appears "Conductor" Windows, then be sure to close it.
    5. Click "Update".

    Wait for the process to complete. Typically this takes about 1 minute. After updating the firmware, you can continue to use the device for its intended purpose. If you previously made a backup, restore the data.

    Method 4: Formatting and checking for errors

    If third-party operating systems, such as Ubuntu, Kali Linux, etc., were previously written to the drive, then quite often after this a problem arises with recognizing the flash drive. This error is due to data formatting features in Windows and Linux.

    If the drive is detected in the system, but errors like "Access denied", "USB device not recognized" etc., then check the flash drive for errors. To do this:


    If the errors have not been corrected, then format the drive as FAT32 or NTFS.

    First, try formatting the media as FAT32; if that doesn’t help, then use NTFS.

    Method 5: Diskmgmt.msc

    Sometimes incorrect reading can occur due to assigning the same letters to different drives. To fix this error:


    The above steps allow you to restore the Silicon Power flash drive. To avoid errors in the operation of the media in the future, try not to interrupt the operation of the USB device while recording or deleting information. To recover media, in addition to proprietary programs from Silicon Power, you can use third-party software, but it is rarely better than utilities from manufacturers.

    Step-by-step instructions for USB flash drive recovery in which I will try to answer the question in an accessible language How to recover a flash drive independently and without much effort.

    Sometimes you help a person, and then he will tell everyone that you are so good and there are already crowds of people thirsty for help. This is roughly what happened when I restored several flash drives colleagues.

    Now the people bear not only their own flash drives, but also flash drives your friends, acquaintances and relatives. Well, at least someone else would bring a bottle of beer or a cookie.

    It’s not difficult for me to help, but when I suggest you learn to do all this yourself, you refuse. Next time I'll just throw them away. If you don't want to study, pass by.

    I’ll finish with the lyrics here and move directly to the topic of the post..

    If your flash drive stopped be determined like a disk, doesn't want to formatted, does not allow you to write down information or something else happened to it, BUT it has no mechanical damage, then you know that all is not lost. Most likely a glitch controller and you will have to tinker with it a little. This procedure takes approximately 5 minutes.

    I’ll say right away that there is no universal programs For recovery all varieties flash drives. You will need to find exactly the one that can work with your controller. flash drives.

    First we need to define VID And PID non-working flash drives.

    Determine VID and PID for flash drive recovery

    Stick it in flash drive into your computer and run device Manager. Start – Execute - mmc devmgmt.msc.


    Then go to the section Universal Serial Bus Controllers.


    We find ours in the list flash drive. Usually, everything flash drives have a name USB storage device.


    Press the right button on the device and open Properties.

    Go to the tab Intelligence.

    Select the item from the drop-down list Instance code devices or Equipment IDs.

    In this window we see PID And VID.

    Finding a flash drive recovery program

    We go to the website FlashBoot.ru and enter the received VID And PID.


    Click on the button Search.

    In the results we look for our manufacturer and model of the flash drive. I have Kingston DataTraveler 2.0.


    The right column will contain the name of the program we need or a link to it.

    All. Now search Google for the program by name or download it from the link provided. Launch and follow the instructions. Usually, in such programs for recovery There’s only one button, so you shouldn’t have any questions.

    That's all!

    If you have any questions, ask in the comments.

    In this article, you will learn about programs that can recover data on a flash drive, as well as configure settings so that there are no problems with flash drives in the future.

    It is possible to correct various flash drive errors by setting up drivers, connecting the flash drive to different ports, and so on. But if this no longer helps, then you need to use more effective methods and use third-party programs.

    I’ll say right away that using such programs to recover flash drives does not always solve, but rather aggravates the problem. Therefore, the choice is yours. This risk is yours and yours alone.

    In the article on flash drive repair, we will talk about such popular flash drive manufacturers as Kingston, Adata, Silicon Power and Transcend.

    Free programs for recovery and repair of flash drives

    UtilityJetFlash Online Recovery forflash drivesTranscend

    This utility was previously called JetFlash Recovery Tool, now JetFlash Online Recovery. This is the official utility.

    Working with this utility is quite simple: connect the flash drive, run the program and then proceed as the flash drive recovery wizard tells us.

    There are two options:

    1. You can fix the flash drive and save all the data on it.
    2. You can repair the flash drive and erase all data on it.

    Depending on your luck, if the first option doesn’t help, then move on to the second.

    Download the utility for free JetFlash Online Recovery

    (downloads: 25494)

    UtilityUSB Flash Drive Recovery forflash drivesSilicon Power

    The utility is freely available on the manufacturer's official website. You can also download it from our website.

    Silicon Power

    (downloads: 21273)

    Kingston flash drive and its repair

    If you have a Kingston flash drive (quite common among users), then you can use the utility from the official website of the Kingston manufacturer.

    Download free utility for flash drive Kingston

    (downloads: 13663)

    Now let's go through utilities and programs that are not a product of a specific manufacturer.

    Program for data recovery from flash drive D-Soft Flash Doctor


    The program is free. Reviews about it are very flattering, so it can help you recover data from a flash drive.

    How can I determine which program is suitable for my flash drive?

    It happens that a person does not know what kind of flash drive he has. Therefore, we suggest that you use a program that will determine the memory controller you are using - Chip Genius. The VID and PID parameters will be indicated there, they will be useful to you.


    As a result, you will be given search results.

    In the Chip Model column you will see which other flash drives, besides yours, use the same controller. The Utils column offers utilities for flash drive recovery. Next, look for the proposed program and use it.

    Losing information on a memory card is a very unpleasant thing. What if there was valuable information on the drives? Its loss can be a real tragedy, and a flash drive recovery utility can be a salvation. But before we describe the process of recovering information on a hard drive, let’s consider the possible reasons for the loss of information on memory cards:

    Drive software failure. If your flash drive does not open and asks you to format it, this is exactly the case. It is usually caused by a crash of a special driver installed on any flash card. You can install it again, and then the drive’s functionality will be restored. However, the information will have to be restored separately. - Virus attacks. Yes, picking up a virus by transferring information from one PC to another is as easy as shelling pears. Some viruses specialize specifically in deleting/damaging files. - Mechanical damage. May be caused by temperature changes, shocks, falls, etc. In this case, the memory card may become completely unusable. But even in this case, it is possible to restore information! - Incorrect operation. A flash drive and/or information on it may be damaged in cases where: you do not use the “Safely Remove Hardware” option, remove the USB drive while downloading, recording information, watching movies, etc.

    Flash drive recovery programs

    How to recover information on a flash card? In almost all of the above cases, special utilities for flash drive recovery will help us. There are a huge number of them now. We recommend that you use only proven software products. “Flash Drive Recovery 2.0” is a powerful utility for recovering flash drives. She is capable of:

    Recover information on drives of different formats and manufacturers (Silicon Power, Kingston Datatraveler, Alcor Micro, Corsair Voyager) and of any size (4gb, 8gb, 16gb, 32gb).
    Work in cases where the flash drive has been formatted many times.
    Recover information even on damaged memory cards.

    Recover up to 100% of deleted information.

    Flash drive recovery software can recover data from any type of storage device (music devices, digital cameras, flash drives, USB drivers, PC cards, etc.). This utility recovers all damaged and deleted files, even if the memory card has been reformatted.

    Read more: