Mobile hotspot is busy. How to set up an access point on an Android phone and distribute WiFi - enable modem mode for Wi-Fi on a smartphone, instructions with screenshots. How to distribute mobile Internet from a smartphone via Wi-Fi? Setting up an access point

The “Access Point” function, present on smartphones and tablets with the Android operating system, allows you to distribute Wi-Fi to several mobile devices and PCs (personal computers). The importance of this option can be appreciated if, for example, when leaving the city you urgently need to access the network from a laptop, but only have a mobile phone at hand. How to properly configure this Android function?

Which Android smartphones and tablets have modem mode and can distribute Wi-Fi to a computer and other gadgets

To be able to distribute the Internet via Wi-Fi, you need a smartphone or tablet with Android (version 2.1 and higher) and an installed SIM card on which 3G / 4G mobile Internet is connected. The design of the device shouldprovide a Wi-Fi module supporting one of the protocols: 802.11b or 802.11g.

Similar protocols are installed in almost all gadgets manufactured after 2009, but to obtain accurate information you should still refer to the technical specification of the device.

If there is support for mobile Internet from the provider, but the phone does not connect to the network, you need to perform its initial setup. It involves entering an APN address through which the built-in modem will gain access to the World Wide Web. Typically, the device requests this address when it first starts. If problems arise with the setup, it is recommended to make a request to the operator and clarify the reasons.

Owners of CDMA smartphones can also use the Wi-Fi distribution function. In such phones, instead of a SIM, there is firmware with saved provider settings.

How to set up a Wifi hotspot on an Android phone and tablet and turn it on

Set up a mobile hotspot like this:

On some outdated smartphones running Android 2.x, instead of the “Wi-Fi access point” item, there may be another one - “Mobile Wi-Fi router” or “Wi-Fi hotspot”. This is the same thing, the setup principle is similar.

Wi-Fi distribution from a mobile router refuses to turn on: possible errors and ways to fix them

If the network setup is done correctly, but there is still no access to the Internet, you need to check whether data transmission is disabled. The “Mobile networks” slider in the “Wireless networks” section is responsible for this function.

If the connection to the network was successful, but the quality of the Internet leaves much to be desired, then most likely the smartphone is operating in 2G mode. To switch to 3G-4G, go to “Settings” - “Mobile networks” and manually select the required mode.

GSM is 2G (low access speed), WCDMA is 3G (speed up to 56 Mbit/s), LTE is 4G. The CDMA standard refers to 3G - the maximum access speed is 14.4 Mbit/s.

The user may encounter that the “Set up Wi-Fi access point” menu item is dimmed (inactive). To access this item, you need to set the “Wi-Fi access point” slider to “On” mode.

How to create a hotspot on Android and use it to distribute Wi-Fi: video

Distributing Wi-Fi from Android is extremely simple. Using this function, you can access the Internet anywhere where there is a mobile operator coverage area. Please note: using such a router quickly drains the battery. On average, a full charge lasts for 3–6 hours of active use.

To distribute the Internet from a smartphone, it is important to know how to set up an access point on the phone. Without it, connection is not possible, but thanks to the instructions you can do this as quickly as possible. Here are simple methods for popular models of smart devices.

The first and most important thing to find out is what an access point is in a smartphone. This is a device that provides a wireless Internet connection to other devices in the immediate vicinity.

What characteristics must a smartphone based on Android, iOS or Windows meet in order to be used instead of a router:

• Availability of Wi-Fi module.
• Built-in 3G or 4G/GSM module.

There is also a separate category of mobile phones, where the above modules do not exist, but OTG technology is present. They can be used as Wi-Fi distributors, but only after connecting a USB modem to it. Before connecting, you should make sure that the software on the devices is compatible.

To make a Wi-Fi access point, you should find out whether the device has an internal modem or whether it is possible to connect an external one to it, and only then proceed with the settings. We type the gadget model into a search engine and look at the characteristics.

Creating an access point on Android

To distribute Wi-Fi from Android, you need to configure the access point:

1. Open the device settings, click on “Wireless networks” and “More”.
2. Open “Modem Mode”, then “Access Point”.
3. Select “Configure”, enter the name under which the network will be detected, select protection, enter the password and save everything.

Important! The minimum password length for wpa2 is 8 characters. It is not recommended to set the date of birth, otherwise strangers will be able to connect to the access point, because it can be hacked using special programs in 3 minutes if the password is weak.

If Wi-Fi does not turn on on Android, the reason for this may be a malfunction of the module. In this case, the network icon will be gray and cannot be moved to another position.

There are other reasons why Wi-Fi does not work:

• Inappropriate firmware.
• Software glitch.
• Infection of the system with a virus.
• Incorrect password entered.

Instructions for iOS

If you can only use a router at home, but need a high-speed wireless connection elsewhere, you can use an iPhone as a router. How to set everything up:

1. Go to settings, select “Cellular”.
2. Open “Data Settings” and go to “Data Transfer”.
3. In the APN field, enter the information provided by the cellular operator, fill in the username and password fields.
4. We reboot the device, go to the settings again, activate the modem mode to use the created network.

In addition to Wi-Fi, you can use Bluetooth as a wireless network:

1. We create a pair between a PC and an iPhone.
2. On the device, click on “Create a pair” and enter the code shown on the PC.
3. We connect to the iPhone from a computer.

Instructions for Windows Phone

The following instructions are suitable for distributing Wi-Fi from a Windows-based phone:

1. Open the “Quick Actions” panel, select “Hot Spot” with a long tap (staying on the window for 1-2 seconds).
2. Select “All Settings” and “Wireless Networks”.
3. Go to the APN configuration item, enter data from the cellular operator, come up with a name and password.
4. Save.

For Sumbian

At the moment, it is becoming less and less relevant, as the Sumbian platform is going into oblivion. To provide an Internet connection on gadgets, you can use various programs. For example, the Joikuspot application, which has very useful features:

• Internet connection via WLAN.
• Ability to provide multiple connections at once.
• HTTPS protocol support with encryption.
• Select any suitable connection point.

Possible problems

The most common problem is a malfunction of the external modem if it is used for connection. There are other factors that affect the connection:

• Incorrect network settings. They need to be clarified with the operator.
• Module failure. The Wi-Fi icon will be gray. To replace it, it is recommended to contact a specialist; repairing it yourself may worsen the situation.
• Lack of funds in the account. If you don’t have regular HSPDA Internet, you won’t be able to use a mobile phone instead of a router until your balance is topped up.

Conclusion

Setting up an access point on Android, Windows Phone and iOS allows you to use devices based on the systems presented above instead of a router. This is necessary when you need to provide a wireless connection on a PC or laptop, but there is no free Wi-Fi network to connect to, or while traveling. The procedure is performed once, after which you just need to activate the modem mode and use the Internet.

Smartphones can not only receive a high-speed connection, but also distribute a signal. Considering that mobile Internet services are now inexpensive, this is a good option to use it on a laptop or other equipment through a mobile device.

Modern mobile Internet is no worse than a home network

Depending on the operating system, there are different ways to turn your smartphone into a hotspot. Let's look at how to do this on models running Android, iOS, Windows, and find out what application is needed for Nokia brand equipment.

Not all Android-based equipment can distribute the Internet, so make sure that your phone has GSM/3G and, of course, a Wi-Fi module. Turning such a device into a modem that will distribute the connection is quite simple.

This is done in the following way:

• Go to the settings menu, select the “Wireless Networks” section.
• Open the “More…” tab and click on the “Modem mode” line.
• Select the “Access Point” section and open the settings for this parameter in the window that appears.
• A window will appear to create a new connection, where you enter a name for the network under which it will be displayed in the list, set a password and indicate its encryption type.
• Save your changes and return to the “Access Point” menu to activate this method of operation.

Now you can use your phone as a router, to which you can connect from various equipment. Subsequently, you do not need to reconfigure the settings; you just need to enable the “Access Point” line.

You can also track who is using your Wi-Fi - the list will appear in the “Modem Mode” window. Additionally, the Android platform provides a speed limiting function, which is activated as follows:

• Open the Bandwidth Usage window.
• Enable the bandwidth throttling line.

Applications

There are special programs with which a smartphone turns into an access point, for example, FoxFi or Wi-Fi Tethering. There is also a Tethering Widget utility that works as a widget. What are they for? If you often use a mobile device to distribute a signal, it is not very convenient to activate this method of operation every time through the settings, but the presence of a special icon in the menu greatly simplifies the process.

Modem mode on the iOS platform

To share an Internet connection on a device running iOS, do the following:

• In the settings, go to the “Cellular” section.
• Turn on the “Modem mode” line.
• Enter the required connection information and create a password.
• In the future, the Wi-Fi point will be displayed on other equipment under the name iPhone.

Creating a hotspot on Windows Phone

On equipment running Windows 8, you can configure connection distribution as follows:

• In the smartphone settings, open the “Internet Sharing” section.
• Turn on sharing mode, after which, if necessary, you can change the network parameters - its name or password.

This is all! As you can see, enabling modem mode in this operating system is very simple and easy. It is worth clarifying that the maximum amount of equipment that can simultaneously connect to the phone is no more than 8 units.

JoikuSPot app for Nokia phones

To create an access point on models from this manufacturer, you will need the JoikuSPot program, which is available in free and paid versions. Download it and do the following:

• Launch the application and confirm the request to allow external devices to connect to the Internet.
• In the list that appears, select an access point, wait until the program creates a connection called JoikuSPot based on it.

• After turning on the network, in the main menu of the application you will see its name, the “Stop” button if you want to stop the connection, and the “Buy full version...” option when using the free version.
• The second tab of the menu shows information about the connected equipment, the third - general data about the operation of the program.

Pay attention!

1. When using the utility, the smartphone consumes a large amount of energy, which means the battery drains faster.
2. The more equipment connected to the network at the same time, the lower the Internet speed.

As you can see, setting up your phone to work in modem mode is quite simple, regardless of what operating system is installed on it. The ability to use mobile Internet on other equipment via Wi-Fi is practical and useful to every user, especially if there are no other ways to connect to the network.

A portable access point is a mode of operation of a smartphone when mobile Internet from a GSM or 3G operator is distributed via Wi-Fi. At the same time, the Wi-Fi module of the smartphone begins to work not as a client, as when connecting the smartphone to a Wi-Fi router, but as the router itself. We will show you how to distribute the Internet from Android by setting up a mobile router mode using the example of a Samsung Galaxy smartphone.

How to set up internet sharing on Android

Press the key Menu:

and select Settings:

Click on Other networks:

Select Modem and access point:

Select an item Portable Wi-Fi Hotspot, moreover, press NOT on the selector, but on the inscription itself :

Click the button Settings:

1) Enter the name of the Wi-Fi network;

2) Enter the password (security key) of the wireless network;

Now switch the selector. This will enable mobile Internet distribution via Wi-Fi:

After that, you will see the “Enable Portable Wi-Fi Hotspot” alert.

While the mobile router is operating, the corresponding icon is displayed in the upper left corner of the screen.

So, we have learned how to distribute the Internet from Android and now we need to connect to a mobile hotspot.

How to connect to Android AP from laptop via Wi-Fi

After you have set up Internet distribution via Wi-Fi on Android, all you have to do is connect to the wireless network broadcast by your mobile device. On a laptop, this network will look exactly the same as other networks from routers.

Select a network. Click Connect.

Enter the security key that you specified in the mobile point settings. Click OK:

Wait for the laptop to connect to your wifi network:

As a result, the following message should appear next to the network name: Connected:

How to disable internet sharing

There are several ways to disable a portable hotspot:

1 Just turn on Wi-Fi:

The system will display the following message:

When you turn on Wi-Fi, the portable Wi-Fi hotspot will be disabled

Click Yes:

2 Go to Settings -> Other networks -> Modem and access point and turn off the portable hotspot:

After this, Android will stop distributing the Internet via Wi-Fi.

First of all, I suggest you figure out what an access point is? This is the most common network router, exactly the same as for home Internet, only it operates at Wi-FI wireless frequencies.

What is needed for an access point on ANDROID

Of course, the device runs the Android operating system with mobile Internet and wi-fi. But not all tablets have 3G support (Internet access through a mobile operator), but if your device has USB or mini-USB connectors, you can connect an external modem. We've sorted that out - let's move on =)

How to create a hotspot on Android

In fact, there is nothing complicated about creating an access point. First of all, go to the settings of your tablet or phone and find the “Wireless Networks” tab and open the “More” item, then “Modem Mode”
We see the following window:

How to set up an access point on Android

• First of all, let's activate the access point
• In the window that appears, come up with a name for your point; it will be displayed when searching for wireless networks (for example, Innovazione)
• Next, we configure the security there are three points - NO, WPA PSK, WPA2 PSK.
• No - this means your access point will be without protection and a password; in other cases, you need to set a password to connect to your wireless network.

Of course, it is better to create a secure connection with a complex password so that strangers cannot connect and use your Internet, because in our country mobile traffic is not yet very cheap.
By the way, it’s better if you have more mobile traffic, and even better UNLIMITED - only then you can enjoy the hotspot on ANDROID without restrictions. If you have any questions during the process