• The iPhone X screen does not work. What to do if the iPhone screen streaks, yellow spots appear, or simply does not work

    One of the main reasons for the wild popularity of modern smartphones is their reliability and serviceability.

    But what if the iPhone 5 does not turn on, and you have already tried all possible methods?

    Unfortunately, even the most advanced gadget of our time is not immune to falls, breakage, shocks, and other things.

    Below we will look at the most likely reasons why your device does not turn on.

    Let's not take into account cases where the iPhone 5 turned off due to the fact that it was simply completely discharged. Let's look at more complex causes of failure.

    Reason #1. System failure

    As practice shows, a system failure is one of the most common reasons why your iPhone 5S stops turning on. In this case, there is no need to take the smartphone for repair.

    You can fix the problem yourself.

    1. Carefully inspect your gadget, if the apple is on, but the blue screen has gone out, then proceed as follows: hold down the only button located at the bottom of the display and the power off (lock) button on the panel at the same time.
      Then hold for 15 seconds. If the reason for the breakdown of the iPhone 5S is a system failure, then it should turn on.
    1. If the apple does not light up, as well as the blue screen, and you are sure that your smartphone is not dead, then simply try restarting the iPhone 5S by long pressing the button on the phone panel.

    Advice! If both of the proposed options did not help you turn on the phone, and you are still wondering what to do next, then try repeating the same manipulations, despite the fact that the device is charging all this time.

    Reason #2. Got wet or overheated

    No matter how reliable the iPhone 5S is, if you drown it or, conversely, leave it in the sun for a long time, then most likely you will need battery replacements later.

    So, if the blue screen goes out and does not light up after falling into water, then proceed as follows:

    • disassemble the smartphone until you replace the battery and let all its components dry thoroughly.

    Advice! ElementsiPhone 5S should dry naturally. There is no need to specifically put them in the sun or use a hairdryer, as this can only make the situation worse.

    • After drying, reassemble the smartphone and try to turn it on. If your gadget doesn’t turn on and you don’t know what to do next, then we can tell you with confidence that it’s a matter of repair. Take the phone to a repair shop as soon as possible.

    Let's assume that your iPhone 5S is overheated, the temperature indicator built into the smartphone can tell you about this.

    If the phone stops turning on and the apple does not burn, then the first thing you need to do is let it cool.

    In other words, it is not charging, not connected to the computer, and is in a cool place.

    But what if after all the manipulations the iPhone 5S does not turn on and does not even charge? The answer is simple: take it to a workshop.

    There is a high chance that your motherboard has failed, which means you will need to replace it.

    Reason #3. Broken charger

    You take care of your iPhone 5S like the apple of your eye, there was no fall, and it did not sink in the water. However, the gadget turned off and is no longer charging.

    You also notice that the apple on the back of the phone is no longer lit, and the screen is no longer blue, but black. What to do in this case?

    1. Check that the charger is working properly. It is quite possible that the gadget has stopped working and is not charging precisely for this reason. Tip: to make sure that it is the charging problem, try connecting another device with it.
    2. Check if the connector is working properly on your iPhone 5S. If this is the reason, then most likely there is nothing you can do to fix it. Take the gadget to the nearest service center.
    3. Check if there is electricity at home. No matter how strange it may sound, there are cases when a user thought that the iPhone 5S had stopped working for any reason, but it did not even occur to him that there was no electricity in the house or that the socket was simply broken.

    Reason #4. Requires installation of new firmware

    Consider a situation where you notice that your smartphone does not turn on, but the apple on the back does not light up and you know what to do about it.

    Quite often the reason is that your smartphone needs new firmware.

    Flashing as such does not bode well for your iPhone 5S.

    Since the consequences of poorly done work may subsequently be irreversible if you turn to incompetent specialists.

    There are also cases when it was easier for a user to change an iPhone than to install new firmware.

    Before you decide to take one of these drastic measures, make sure that your smartphone has not overheated, has not fallen, or is not charging (while charging is working properly).

    Also check how the apple on the back of the smartphone and the screen react when you try to turn it on.

    If the display turns blue, then perhaps you can do without replacing the firmware.

    And in the case when neither the apple nor the screen responds to being turned on, things are much worse and in any case you need to take the device to a service center.

    Display malfunctions are a common problem with the iPhone 8. The malfunction may appear unexpectedly: the smartphone has just been working, and a minute later the screen backlight is no longer activated. What to do if the iPhone 8 screen goes blank? Should you immediately run to the service center or can you try to restore the functionality of your favorite smartphone yourself?

    Reasons for screen fading

    If the screen on an iPhone 8 goes dark and won’t turn on, there are a number of possible reasons for this phenomenon. The most common of them:

    • Moisture penetration leading to oxidation of connectors on the motherboard;
    • Mechanical damage, in particular impacts, which lead to the display cable coming loose or breaking;
    • Factory defect;
    • Software errors;
    • No charge.

    The last 2 points of the presented list can be solved independently, but in the first 3 cases you will need to disassemble the smartphone, repair it or replace the display.

    The screen on iPhone 8 has gone dark: what to do?

    Software glitches can be fixed simply and easily at home. All other problems require contacting a service center or disassembling the device yourself.

    System failures

    During operation of the device, the iOS system may freeze, leading to malfunctions of the smartphone. The lack of screen backlight is one of these glitches. You can try the steps below.

    1. Press the power button.
    2. At the same time, hold down the volume rocker and use the side key to try to lower it.
    3. Wait for the Apple logo to appear.
    4. Observe the operation of the smartphone after such a reboot (if it took place). If the problem recurs, more in-depth troubleshooting will be required.

    We do flashing via iTunes

    Original Apple equipment is equipped with a special DFU mode, which makes it possible to reflash the OS or return to its previous version. To roll back to the version of iOS that was installed before, do the following:

    1. Open the latest version of iTunes on your PC or laptop.
    2. Connect the USB cable.
    3. Hold the Home button for a few seconds until the iTunes label appears on the screen.
    4. Follow the application commands.

    Charging the battery

    The reason why the screen on the iPhone 8 went dark could be a simple lack of charge. Insert the charger into the connector and make sure that charging is taking place (this is indicated by the display of a charging battery on the screen). Turn on your smartphone.

    A situation where charging is not displayed indicates a broken charger. Replace it with a new one and try not to buy a cheap Chinese fake, which, as a rule, quickly breaks down.

    Moisture ingress

    No matter how much the manufacturer claims that the smartphone is waterproof, moisture can still penetrate into it. The ingress of liquids leads to oxidation of the contacts. In this case, the image on the iPhone 8 may disappear.

    We do the following:

    1. Wrap your phone in a dry towel after bathing.
    2. Blow with cold air from a hairdryer.
    3. We disassemble the smartphone using special tools.
    4. We inspect the motherboard. You may notice traces of oxidation.
    5. We clean them with isopropyl alcohol using cotton swabs or a soft bristle brush.

    After cleaning and reassembling, turn on the phone and check its functionality.

    As you can see, there are several ways to fix the problem: correct system errors, carry out repairs, or replace the part. You need to start working by eliminating system errors, and then, if the situation is not resolved, move on to radical actions - repairing or replacing parts yourself, or by contacting a service center.

    Did the device suddenly go dark and turn off? Most likely the cause is a broken display or moisture. Many users encounter the black screen problem every day, but this is not a reason to be upset. Dial the number of our service center (SC) and get a free consultation on how to quickly resolve the situation.

    Causes of malfunction

    The iPhone is a reliable device, but its breakdown is no exception. Experts identify several reasons why the screen does not work on the iPhone 4, 4s:

    • moisture ingress;
    • phone freezes;
    • external defects (falls, etc.);
    • complete discharge;
    • non-original spare parts made in China.

    If the display does not work on an iPhone 4 or 4s, you will need to disassemble the gadget to fix it. Often, users do not have the necessary tools at hand and do not have sufficient knowledge, so it is much easier to take the device to a service center.

    Solving the problem

    What to do if the device becomes dark and stops responding to external influences? Many users try to solve the problem on their own by rebooting the phone by holding the Home and On/Off buttons. Such manipulation does not always help and can make the situation even worse.

    When wondering why the screen on the iPhone 4, 4s does not work, several options come to mind. The best of them are:

    1. Dry any moisture that gets inside. This can be done by disassembling the gadget, removing the battery and putting all the parts in a container with rice. Be careful! Such popular advice only helps in 10% of 100% cases.
    2. Check the charge level. Often the reason lies precisely in the fact that the iPhone stopped working due to complete discharge.
    3. If the phone is under warranty, contact the center where you purchased the device for free diagnostics and repairs under warranty.

    Only an experienced worker can safely disassemble an iPhone and replace parts. Our specialists will tell you how to quickly “reanimate” your gadget.

    Help from the hands of masters

    If the phone has not been dropped into water, is fully charged, and there have been no attempts to restore it yourself, contact technical specialists.

    The display replacement for iPhone 4, 4s in St. Petersburg will be carried out by service center specialists. A long warranty and a professional approach to business will confirm that you have made the right choice.

    Important! Repair at a service center will cost less than buying a new device, because after unsuccessful attempts at self-repair, you will have to purchase another gadget.

    Call right now for a free consultation, and our technicians will be happy to help you solve the problem of your failed display.

    Warm categorical greetings to everyone! Constantly active screen backlight can become quite a big problem - after all, the fact that the display does not go out automatically leads to all sorts of inconvenient things. Which ones? But for example: very fast battery consumption, strong heating of the device, and in general it’s terribly annoying, since it’s almost impossible to use the iPhone in this state!

    No, of course, there is one win-win option - put your smartphone on charge and never unplug it from the outlet. How do you like this? I don't like. It’s much better to deal with the always-on iPhone display once and for all. This is exactly what we will do today. Are you ready? Ready, attention, march. Let's go! :)

    What situations can cause the iPhone screen backlight to be constantly active:

    But you never know what else could happen! Let's take a better look at all the ways to solve the problem of the iPhone screen not going off. So, here are the actions that are universal and suitable for every case:

    • Hard reboot. To do this, press and hold two buttons - Home + Power (for iPhone 7 and older - volume down and power button) until a complete reboot.
    • Software via DFU, after this it is important not to restore the backup and observe the behavior.

    Now let's move on to special cases. There can be two of them:

    1. The display does not go off during a call.
    2. Does not automatically lock or turn off the screen after receiving a notification or in standby mode.

    iPhone screen doesn't turn off during a call? Solution!

    First of all, look carefully at the front of the gadget. Do you see films, glass, cases on it - covering the front side of the iPhone? Even if they seem completely transparent to you, it makes sense to get rid of them and check the operation of the light sensor without such accessories.

    If this does not help, and all the previous tips (resetting settings, rebooting, restoring) were completed, then most likely the problem is with the light sensor. He could either simply “move away” or break.

    This is why when you hold the phone up to your face during a call, your iPhone doesn't know to turn off the screen and it doesn't happen. There will be only one solution - replacing the proximity sensor. Fortunately, its cost is not high and it changes quickly. On average it will cost you 1500-3000 rubles.

    iPhone display does not turn off after receiving a notification or SMS

    The situation is this: a notification arrives on a locked iPhone, the display naturally lights up, but subsequently does not go out automatically, and you can only turn it off by pressing the lock button. I know from myself that it’s terribly annoying, especially at night. I received a notification when I was sleeping, I woke up and my phone was completely discharged.

    I’ll say right away and make you happy - the problem, most likely, is in the software. This means there is a chance to fix everything without going to a service center. What you can do:

    1. First of all, go to Settings - General - Auto-lock. If it is set to “never,” then this is precisely the reason that the screen does not lock automatically. Set the exact time interval (default is 1 minute).
    2. Next, you should perform the steps indicated at the beginning of the article, namely a complete reset and restoration of the firmware. But there is a small “hiccup” here - such actions are not always convenient to perform, and it takes a long time. So you can do this...
    3. Remember what games and applications you installed recently and remove them one by one and check if the situation has changed for the better. And of course, if you have a jailbreak on your device, then you should also pay attention to the tweaks that are installed, they can certainly lead to the screen not going dark.

    Finally, I would like to note that you should not forget about the warranty (

    25.02.2018

    If the screen of an iPhone does not work, not all owners know what to do, and yet the question is very, very relevant: the cost of the display is high, so replacing it out of ignorance can lead to unnecessary expenses. To avoid this, it is important to know two things: the causes and ways to fix the problem without harming the phone.

    Screen stopped working on iPhone 4

    Before rushing around in a panic and looking for advice wherever possible, check if your device is frozen. Yes, Apple devices hardly freeze, so this phenomenon is mistaken for a breakdown. A broken screen in this case can be easily corrected by rebooting (holding the power button and sleep/home). If this helps, but is repeated frequently, contact service immediately - the screen is fine, but the system itself or the components are “naughty” - they need to be repaired.

    If rebooting does not help or the apple symbol does not appear, proceed to the next step. Another reason why the screen on the iPhone 4 does not work may be its Chinese origin: non-original equipment breaks down very quickly, not to mention the fact that its repair exceeds the cost of the product itself several times. The decision to buy an iPhone secondhand is quite dubious. Think about it, do you need it? Yes, you will save several thousand rubles, but then you will go broke on replacements.

    Screen on iPhone 4s does not work after flooding

    Having “bought” your device, you risk completely ruining it, so do the following as quickly as possible:

    1. Turn off your phone;
    2. Disconnect the battery (You will need a screwdriver for the small bolts, it is screwed on);
    3. Wipe away any visible water;
    4. Place the iPhone in a container with rice and leave it for a day.

    After this, the device may turn on, but it is better not to risk it and contact service. Instead of rice, you can use a hair dryer or a special case, but in the case of a hair dryer there is a risk of damaging the insides and completely “killing” the device, and in the second case the price of the case may be higher than the price of repairs from honest craftsmen.

    iPhone 4 screen does not work: what to do

    Check battery charge before disassembly

    The first thing to start diagnosing is checking the charge level. Oddly enough, one of the reasons people turn to Apple services is simple forgetfulness: a completely discharged phone may not turn on even when running on a charger, which people who are especially prone to panic perceive as a breakdown.

    If everything is fine with charging, inspect the iPhone. The screen does not show, but everything else works - you should think again whether you or anyone else has ever flooded the device, because the remaining moisture is insidious and harms the entire device slowly, even if it worked before. Were there any such cases? Well, you are a very careful user, so the reason why the iPhone screen has stopped working, there is sound, and calls are still being made is either a breakdown of the screen as a whole, or a loose cable.

    Having experience in assembling and disassembling complex electronic devices, you can disassemble your iPhone yourself and check the reliability of the cable fastening, but remember: if the phone has a warranty, you should not do this, otherwise any service will revoke the warranty due to opening.

    There is no guarantee - no worries, you can check. If the cable looks correct, it is better to take the iPhone for examination. Advice for owners of kinescope TVs and screens (if there are any left): do not place the device on them; the iPhone 4c screen does not work after lying for a long time. Either charging with a reboot or service helps. The effect of the kinescope on the iPhone screen is noticeable.

    The iPhone works, but the screen does not light up

    Often, by “does not light,” users mean an insufficient level of illumination, which confuses the craftsmen. If your screen is just dimly lit, but the picture on it is clear and the device’s response is good, increase the brightness in the settings - it will help 100% if the firmware is original and correct. A non-working item for changing the backlight may cause an error during the update, this is corrected by the firmware, which is better to do in the service.

    If you don’t want to contact service for such a small thing, try resetting the settings to factory settings, it may also help. Don’t get carried away with unauthorized flashing: the same JailBreaks are capable of introducing malicious code into the system, causing individual components of the iPhone to function incorrectly.

    Choosing a service

    Quality service is the key to iPhone performance

    “The iPhone works, but the screen is black? Our masters know what to do!” A similar statement in various forms is found in contextual advertising and in paper advertisements, the essence is the same: to lure you as a client. Do not be fooled by discounts and free diagnostics: a licensed service charges money for diagnostics, but then deducts its amount from the cost of the service. What to pay attention to when visiting:

    1. Availability of a service center in the list of official Apple services. It can be found in the community and on the website;
    2. Reviews. You are not the first one whose iPhone screen does not work, which means that a similar problem has already been addressed, and this can be described in the reviews. It is important to check reviews not on the official website, but, for example, on social networks, since reviews on the site in 95% of cases are written by the owners of the service;
    3. Condition of the premises. It is better not to go into basements where mushrooms grow on the walls;
    4. Price. Professional service centers are unlikely to undertake replacing the display for 500 rubles. The low price should alert you.

    By the way, services that promise “only original spare parts” are often disingenuous: Apple does not have original spare parts, but only high-quality Chinese analogues. The paradox is that phones are repaired with the same parts from which high-quality replicas are assembled. After handing over the device, do not forget to take the equipment acceptance certificate for repair, which should indicate the ID of your iPhone.

    Read more: