Disable touchpad on samsung laptop. How to disable the touchpad on a laptop? - There is nothing simpler. Professional ways to disable the touchpad

There are several ways to turn off your laptop's touchpad: using function keys, through the control panel or device manager, or using special software. Disabling is usually required if a regular mouse is connected to the laptop, and the touchpad becomes a redundant input device.

Shutdown via control panel

First of all, let's figure out how to disable the touchpad on a laptop through the control panel. Most modern laptops have a Synaptics touchpad installed, so the shutdown follows the same algorithm:

Here you can configure the behavior of the touchpad, as well as disable it completely. If you still use the touchpad periodically, then set the touchpad to automatically turn off when you connect a mouse to your laptop. This is a very convenient function that will allow you to forget about the inconveniences that arise when using the sensor and a regular computer mouse at the same time.

This method of disabling the touchpad will only work if the drivers from the manufacturer are installed on the laptop. If the mouse settings do not allow you to disable the sensor, you will have to use other methods.

Shutdown using hot keys

If you want to know everything about how to disable the touchpad on a laptop, then you can’t do without information about hot keys. This is the fastest way to make the panel inactive: just press two buttons on the keyboard so that the sensor stops responding. Pressing it again will turn the touchpad back on.

Manufacturers assign different shortcuts to their devices, but usually you need to press the Fn button in combination with one key from the F1-F12 row. You can find the appropriate key by the graphic image of the crossed out touchpad.

ASUS

On ASUS laptops, the sensor is disabled using the combination Fn+F7 or Fn+F9. Pay attention to the icon - the crossed out touchpad will help you make the right decision.

Acer

If you have an Acer laptop, press Fn+F7. This combination will work if there is a hand drawn in the corner of the button pressing the panel.

HP

To disable the touchscreen on an HP laptop, you need to double-click the area at the top of the touchpad.

Usually the desired area is highlighted by a small depression. The built-in mouse also turns on by double-clicking.

Lenovo

On laptops manufactured by Lenovo, you need to pay attention to the F5 and F7 keys. One of them will have a crossed out panel, that is, if you press this key in combination with Fn, the touchpad will stop working.

Sony

On Sony computers the combination Fn+F1 works. In addition, Sony laptops have the Vaio Control Center application installed by default, which also has a function to turn off the touchpad.

Samsung

By default, Samsung laptops use the Fn+F5 combination. If you have a laptop from another manufacturer, then look for a list of hot keys in the instruction manual or look at the icons on the buttons. In addition, in some cases, for hot keys to work, you need to install a special utility - for example, ATK Hotkey Utility for ASUS. All software can be downloaded from the manufacturer’s website for free; the main thing is to choose the right laptop model and OS version.

Using Device Manager

If the hotkeys do not work and you cannot or do not want to find the touchpad drivers for your laptop, then try deactivating the built-in mouse through the device manager.

If you cannot find the touchpad by name, disconnect all available input devices one by one and check if the touchpad has stopped working.

Using third party software

If you cannot disable the touchpad through the device manager, use special software to block the mouse built into your laptop. The program is called Touchpad Blocker, you can download it for free from the developers' website. The only drawback of this utility is the lack of localization, so before you start working with it, you need to figure out which parameter is responsible for what.

The application runs in the background, slightly loading the system. Unlike other methods, using Touchpad Blocker only allows you to deactivate it while you're typing, so you can avoid accidental taps without completely disabling the touchpad.

A laptop is designed as a portable device that replaces a personal computer; therefore, all the functionality of a desktop computer that is familiar to the user must be implemented in it.

But in such a way that it does not create difficulties when used for its intended purpose - away from power sources and stationary flat surfaces.

One of the most convenient features of a modern computer is a mouse, or, scientifically speaking, a manipulator that converts physical movement into an electrical signal.

The signal can be a command to move the cursor or scroll pages in a text editor. As a replacement for a mouse, a laptop uses a special device - a touchpad.

The exact translation from English of the word “touchpad” means “touch panel”, “touch panel”. Virtually no skills are required to operate it; cursor control through hand movement when using a computer mouse is replaced by finger movement when using a touchpad.

The ergonomics of the laptop are designed in such a way that your fingers find it themselves. Forcing the cursor to move along bizarre trajectories.

Disconnection methods

The touchpad is an element of laptop hardware, therefore, the mechanisms for determining its operating mode are similar to those applicable to other hardware components.

Among such mechanisms are the following:

The first four methods are discussed below in this article in chapters with corresponding names. But it’s worth talking about the physical method separately.

To replace system components, which does not negate the manufacturer’s obligations for warranty service of purchased high-tech equipment, specialized covers are provided on the bottom panel of the laptop case for removing and installing electronic devices.

The touchpad cannot be physically disconnected from the motherboard without opening the case; there are no special covers for this. Thus, this operation, once performed, automatically removes the laptop from warranty.

To disconnect it from the motherboard, you need to disassemble the laptop and disconnect the touch panel cable from the connector on the board. The reverse operation is also possible: to connect the touchpad after physical disconnection, the cable is plugged back into the motherboard connector.

The operation is not complicated, but requires basic skills in handling modern electronic components.

Video: How to disable the touchpad while typing

Function keys

Function keys control the operation of the laptop's peripheral components. Activation of control functions is carried out, as a rule, by holding down the key Fn with simultaneous pressing of the row key F (F1–F12).

Attention! The location of the Fn key in Figure 1 is shown schematically. On your laptop model, the Fn key may be located in a different location, for example, between the left Ctrl and Alt keys.

The list and functions of control keys do not fall under any international or corporate standard, so each laptop manufacturer is free to assign the functionality of the keyboard buttons based on their own preferences.

A crossed out rectangle on one of the function keys may indicate exactly the function you are looking for. While holding down the Fn button, press the key with a crossed out rectangle. Move your finger across the touchpad. Is the cursor moving? So it's not that simple.

The following list contains standard keyboard shortcuts for disabling the touchpad on a laptop, sorted by laptop manufacturer:

Attention! Your specific laptop model may not have a keyboard shortcut assigned by the manufacturer to disable the touchpad. In this case, the method of disabling the touchpad using function keys does not apply to your laptop model.

Synaptics Settings

The method discussed below is applicable only to touchpads manufactured by Synaptics.

This manufacturer is the largest in the world, but your laptop may have a touchpad from another brand installed.

To disable the Synaptics touchpad, follow these steps:

Checking whether the touchpad is disabled is simple: after clicking on the “OK” button and moving your finger across the device, the cursor should not move.

devmgmt.msc command

Team devmgmt.msc, entered in the Start menu input line, opens the “Device Manager” snap-in, which is familiar to every Windows user.

The same snap-in can be opened through the Windows Control Panel by following these steps:

1. clicking on the “Start” button;
2. selecting the “Control Panel” item;
3. in the control panel, select the “System and Security” category;
4. In the “System” section, select the “Device Manager” snap-in.

In Device Manager, the touchpad can be in one of two categories:

It can be called by different names, for example, “USB input device” or something with the words “touchpad” or “touchpad”. In the version shown in Figure 3, the touchpad is called “Finger Sensing Pad” and is located in the “Mice and other pointing devices” list.

Right-click on the selected element and select “Disable”.

Bios

To completely disable the touchpad, you can use the BIOS function, which controls the settings of the built-in pointer. To enter the BIOS settings configuration mode, after turning on the laptop, press the key on the keyboard specified by the laptop manufacturer. So, for most laptops you need to press the F2 key, another common option is the key Del.

Photo6 BIOS program screen

Attention! Function key assignment information is usually displayed on the bottom line of the screen.

After entering the BIOS settings, you need to find the option "Internal Pointing Device" and set its value to "Disabled". If you need to turn the touchpad back on, you will have to enter the BIOS again, find the same option and set its value to "Enabled".

Photo: disabling “Internal Pointing Device”

How to disable the touchpad on a laptop when a mouse is connected

Apparently, the simplest and most logical way is to configure your laptop's operating system to automatically turn off the touchpad when you connect an external mouse. To activate this mode:

Attention! This setting is not available on all laptop models. The presence of such a setting on a specific laptop model depends on the version of the operating system, the version of the USB mouse and touchpad drivers.

If your laptop is equipped with a Synaptics touchpad, the same result can be achieved by checking the “Disable internal pointing device when connecting an external pointing device to the USB port” switch on the device settings management tab, as shown in Figure 2.

Although there are several ways to disable the touchpad on a laptop, not everyone can work on your computer model. The specific method is determined by the user based on his needs, hardware capabilities and laptop software.

The touch panel (touchpad) allows you to control the laptop in the absence of a computer mouse. Use touchpad taps to simulate mouse clicks, right-clicks, and select items. For convenience, you can perform touchpad actions in Windows using two, three, or four fingers.

But what to do when the touchpad causes false clicks, for example in games or while typing. That is why you need to know how to disable the touchpad on a Windows 10 laptop. There are really many ways to disable the touchpad, starting with key combinations to disable the touchpad and ending with installing third-party utilities.

Key combination

The easiest way to enable or disable the touchpad on a laptop is to use a keyboard shortcut. Every laptop manufacturer has added the ability to disable the touchpad using a key combination. In most cases, you need to hold down the Fn function button and press one of the keys F1-F12. To determine the required key combination, you can use our table, or it is better to look for a pattern of a crossed out or inverted touchpad on the keys.

Please note that different manufacturers install different key combinations on their laptops. Another interesting feature of some laptops is that you don't need to use the Fn key to disable the touchpad. And to use the hotkeys F1-F12 you will have to hold down the Fn key.

Also note that disabling the touchpad on HP laptops is done using a sometimes hidden button on the panel itself (touchpad). Double-clicking this button actually turns off the touch panel.

Windows 10 Settings

The current method works if you have the latest versions of the original drivers for the touchpad (touchpad).

It was also noticed that there is no way to disable the touchpad using this method in the latest version of the Windows 10 operating system. Instead, only changing the sensitivity of the touchpad is available. Setting the sensitivity to low may eliminate the need to disable the touchpad completely.

Control Panel

The current section may be named differently, from Device Settings to Synaptics, depending on the manufacturer and driver version. Regardless of the section name, the ability to disable the touchpad or touchpad is present on all laptops.

We would also like to draw your attention to the point Disable when connecting an external USB mouse, activating which will automatically disable the touchpad when using the mouse. The advantage of this feature is that the user does not have to turn off the device every time.

device Manager

If you don't have the latest drivers, you may have to look for the touchpad in the HID Devices section. There it can already be called an HID-compatible touch panel.

Windows Mobility Center

On some laptop brands, you can turn off the touchpad directly from the Windows Mobility Center window.

Disable touchpad by program

There are many free utilities that block touchpad clicks. Among the most popular ones, you can choose Touchpad Blocker, TouchFreeze or Touchpad Pal. While Touchpad Blocker has different settings, TouchFreeze and Touchpad Pal work immediately after launch.

• If you need to completely block the touchpad then download Touchpad Blocker.
• If you need to lock the touchpad only while typing, then you can use TouchFreeze And Touchpad Pal.

Enabling or disabling the touchpad in BIOS

For more experienced users, there is a way to disable the laptop's touchpad in the BIOS. In new laptops, you will have to look for possible disabling options already in the UEFI interface. We will not consider how to open and enter Bios on your laptop. I will show you the possible locations of the button responsible for the operation of the laptop’s touch panel.

• Advanced > Internal Pointing Device > Disabled.
• Boot > Touch Pad Mouse > Disabled.

Conclusions

Knowing how to disable and enable the touchpad (touchpad) on a laptop is simply necessary for every user, regardless of the operating system. We looked at the disabling process using the Windows 10 operating system as an example. In principle, it does not differ from the options for disabling the touchpad on previous operating systems, except for the use of the new Windows 10 settings management interface.

The laptop's touchpad helps control the cursor. If it bothers you, you can block it at any time and then unblock it. We'll tell you how to disable and enable the touchpad on a laptop - the specific steps depend on the brand of the device and the OS installed on it.

On laptops, a special button or a combination of them is usually used to disable and enable the touchpad. You can find the one you need by looking at the picture - a rectangle with two fields on top. A number of laptops have a separate hardware button to turn off the sensor - it is located on top or on the side of the main panel.

ASUS

How to disable or enable the touchpad on an ASUS laptop: try the combinations Fn+F7 and Fn+F9. One of these combinations will help both block the panel and activate it again.

Acer

On Acer models, disabling the touchpad is done in the same way as on an ASUS laptop - with the combination Fn + F7. The picture on the desired function button here usually depicts a finger raised to the panel.

HP

How to disable or activate the touchpad on an HP laptop: double-click on the top left corner, where there is a white dot or a small indentation.

Another way for HP is to place your finger in the left corner of the panel at the top and hold it for 5 seconds.

Sony

On Sony models, try the Fn+F1 combination. If your laptop has the proprietary Vaio Control Center utility, control the touchpad through it: in the “Mice and Keyboards” subsection you can not only deactivate the panel, but also set gestures for calling individual functions.

Samsung

On Samsung devices, touchpad control is tied to the Fn+F5 keys.

Lenovo

How to enable or disable the touchpad on a Lenovo laptop: check the combinations Fn+F5 and Fn+F7. Devices of this brand have Synaptics-type panels installed, so they can be controlled through a special utility.

Toshiba

Toshiba's panel controls are usually built into the popular Fn+F5 combination.

Windows tools

How to turn the touchpad on or off on a Windows 10 laptop: open system settings from Start. Go to the “Devices” section and select “Touchpad”. At the top you will see a switch that activates and disables the touchpad.

Also in this section there is a useful option - whether to disable the panel when connecting a regular mouse.

A number of manufacturers add their functions to the Mobility Center - it opens from the tray by clicking on the battery icon. If your model has a touch control unit, use it to activate the touchpad.

For Synaptics panels

Many popular laptops have Synaptics sensors, which the manufacturer equips with a proprietary utility. You can find it using Windows tools:

• launch system settings from Start;
• go to “Devices” and select the “Mouse” sub-item;
• open “Advanced options”;
• If the window has an additional tab with a red icon, use it to control the sensor.

To enable or disable the panel, select it in the list of devices and click on “Activate” or “Stop” accordingly. The “Disable when connecting a USB mouse” option will allow you to automatically deactivate the touchpad when you plug the mouse into the USB port.

In the dispatcher

Another available option for how to enable the touchpad on a laptop is through the “Device Manager” functions. To launch it in Windows 10, hold down Win+X and select the menu item of the same name. In younger versions of the OS, the utility is available through the properties of “My Computer”. In the list of devices, look for the sensor - it should be in the “Mice” or “HID Devices” category.

The name of the panel does not necessarily include the word "TouchPad", it may be listed as a "USB device" or other similar name. To disable, right-click on the found line and select “Disable” in the submenu; when the panel is disabled, the “Enable” option will be available. If you cannot accurately identify the touchpad in the list, sequentially turn off all entries similar to it - you cannot damage the equipment in this way; if you make an error, simply turn the device back on.

Third party programs

A little more functionality can be found in additional applications. Touchpad Blocker provides more flexible settings, but the interface is only in English. The user is presented with the following parameters:

• Block accidental taps and clicks – blocks accidental clicks by turning off the panel while typing. Next to it you can set the number of seconds for which the sensor is deactivated after pressing any keyboard button.
• Also block move and wheel event – ​​deactivates page scrolling.

Additionally, you can set hot keys to launch functions and sound alerts.

In Bios

You should change the BIOS settings as a last resort, when other points have not helped, and it is very important for you to completely disable the touchpad for a long period of time. It is also worth checking the BIOS if the sensor does not respond to presses, although it is enabled in the Windows settings. What we do:

• reboot the PC, at the beginning of the boot press Del to launch the BIOS;
• go to the Integrated Peripherals tab;
• opposite Pointing Device, change the value to Disabled;
• save the settings and reboot.

Conclusion

We figured out how you can control the touchpad on different laptops. The fastest way is to use special keyboard shortcuts; if they do not work on your model, use the tools built into Windows. Leave changing BIOS settings as a last resort, when you definitely do not plan to use the touch pointer anymore.

This is primarily a mobile device. When developing a new model, engineers are trying to make the laptop more convenient for use outside the home or office. This is why all laptops are equipped with a touchpad.

But, if outside the usual workplace the touchpad turns out to be very useful, then at home or in the office, where it is possible to connect a mouse, it brings more inconvenience than benefit. Therefore, many users are interested in the question of how to disable the touchpad on a laptop.

Method No. 1. Disabling the touchpad using a button.

If you want to disable the touchpad on a laptop, then the first thing to do is to carefully inspect the touchpad itself. On many laptop models, there is a special button next to the touchpad to disable it. If there is such a button, then you just need to click on it.

If there is no separate button, then perhaps there is a touch button on the touchpad itself. Typically this button is marked with a dot. In order to disable the touchpad using the touch button, you just need to press it twice in a row (double click).

Method No. 2. Disabling the touchpad using the Fn button.

Laptops have a function key called Fn. It is used to disable various functions of the laptop. If the laptop does not have a button to disable the touchpad, then it must have an Fn button that implements this function.

In most cases, the following key combinations are used:

• On ASUS laptops: Fn + F9 or F7
• On Lenovo laptops: Fn + F8 or F5
• On DELL laptops: Fn + F5
• On ACER laptops: Fn+ F7;
• On Samsung laptops: Fn + F5 or F6;
• On Sony Vaio laptops: Fn + F1;
• On Toshiba laptops: Fn + F5;

WITH Method No. 3. Software disabling the touchpad.

In order to disable the touchpad in Windows settings, you need to go to the “Hardware and Sound – Mouse” section.

In the window that opens, you need to go to the “Device Settings” tab. In some cases, this tab may be called differently, for example “ELAN”.

On the “Device Settings” tab, click on the “Disable” button. After this, your laptop's touchpad will be disabled.

Also, in some cases, on the “Device Settings” tab there is a “Disable when connecting an external mouse” function. When this function is activated, the touchpad will only work when it is not connected to the laptop.

Important note: if you open the “Hardware and Sound - Mouse” window, but there is no “Device Settings” or “ELAN” tab, then you do not have the touchpad drivers installed. Install the driver and restart your computer. After this, the required tab will appear.

Method number 4. Disabling the touchpad through BIOS

If you want to disable the touchpad on your laptop once and for all, then you can do this through the BIOS. To do this, find a function called “Internal Pointing Device”. This function is usually located in the “Advanced” section.

Find the “Internal Pointing Device” function and change its value from “Enabled” to “Disabled”. After this, exit the BIOS saving the settings (this can be done by pressing the F10 button). After you restart your laptop, your touchpad will be completely disabled.