Flashing zte blade a5 megaphone. Zte blade a5 pro official firmware. Unlock firmware zte blade a5 and a5 pro
February 3, 2018 By
ZTE Blade A5 Pro Firmware Flash File/Stock ROM ZTE Blade A5 Pro
Early steps to Install Stock ROM on ZTE Blade A5 Pro
- Download and Install Spreadtrum USB Driver on your Computer
- Download and on your computer
How To Flash ZTE Blade A5 Pro
- Download USB Driver And Firmware For your ZTE Blade A5 Pro
- Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then Skip this Step.
- Download .pac firmware for your device (Itel, other)
- Download and extract Spreadtrum Upgrade Tool on your computer.
- Now, open UpgradeDownload.exe.Once Spreadtrum Upgrade Tool launched, connect your Android device to the computer (make sure your device is switched off).
- If Smartphone is securely attached to the computer, click on the Load Packed Button and add the .pac file (stock ROM which comes as .pac).
- Having successfully added the.Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
- During the flashing process, your device will restart automatically.
- Once flashing completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
- Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
- Note flashing after phone on must 5 to 10mins
- During the flashing process, your device will restart automatically. Once flashing completed, you will be able to see the Green Passed Message in SPD Upgrade Tool
- After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
Might Also Like
File Name: ZTE_Blade_A5_Pro_SP7731GEA_V1.0.3_02122016_5.0.1_SPD.zip
File Size: 817 MB
How to Flash:
ZTE Blade A5 is a branded Chinese smartphone that received 0 points for performance. Here you can download firmware (for all operators, firmware ROM), find out how to reset settings or get root. There are also instructions on ZTE. This smartphone needs further evaluation. On board it has - ARM Cortex-A7, 1200 MHz
Characteristics
- Type: smartphone
- Operating system: Android 4.4
- Case type: classic
- nCase material: plastic control: touch buttons
- SIM card type: micro SIM+nano SIM
- Number of SIM cards: 2
- Multi-SIM operating mode: alternating
- Weight: 127 g
- Dimensions (WxHxD): 63.8x125x11.5 mm
- Screen type: color TFT, 16.78 million colors, touch
- Touch screen type: multi-touch, capacitive
- Diagonal: 4 inches.
- Image size: 800x480
- Pixels per inch (PPI): 233
- Camera: 3.20 million pixels, LED flash
- nVideo recording: yes
- Front camera: yes, 2 million pixels.
- Audio: MP3, FM radio
- Headphone Jack: n3.5mm
- Standard: GSM 900/1800/1900, 3G
- Interfaces: Wi-Fi 802.11n, Bluetooth 2.1, USB
- Satellite navigation: nGPS
- Processor: ARM Cortex-A7, 1200 MHz
- Number of processor cores: 4
- Built-in memory: 4 GB
- RAM capacity: 512 MB
- Memory card slot: yes, up to 32 GB
- Battery capacity: 1400 mAh
- Charging connector type: micro-USB control: voice dialing, voice control
- Airplane mode: yes
- Sensors: light, proximity
- Flashlight: yes
ZTE Blade A5 Review
Hello! My problem is this. When you turn on the smartphone, a message appears that an error has occurred in the application. I click OK, the same warning pops up, but only about another application. I click OK again and again the error is in another application. And so on ad infinitum. I tried to reset the settings to factory settings, using the key combination (volume and on) did not help. After restarting, 5-10 seconds are normal. then again this info.
»Firmware for ZTE Blade A5
ϒ Official firmware Blade_AF5_B03 based on Android 4.4 KitKat -
ϒ Stock firmware 1.0.1 (with SIM lock) for A5 -
ϒ Stock firmware 1.0.1 (without SIM lock) for A5 -
ϒ Custom firmware Android 7.0 Nougat -
If custom or official firmware for ZTE has not yet been added here, then create a topic on the forum, in the section, our specialists will promptly and free of charge, including. with backup and manuals. Just don’t forget to write a review about your smartphone - this is extremely important. Firmware for ZTE Blade A5 will also appear on this page. Please note that this ZTE model requires an individual ROM file, so you should not try firmware files from other devices.
What custom firmware are there?
- CM - CyanogenMod
- LineageOS
- Paranoid Android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- FlymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and shortcomings of a ZTE smartphone and how to fix them?
- If the Blade A5 does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
- If stuck during update / stuck when turned on (needs flashing, 100%)
- Doesn't charge (usually hardware problems)
- Doesn't see the SIM card
- The camera does not work (mostly hardware problems)
- The sensor does not work (depends on the situation)
Hard Reset for ZTE Blade A5
Instructions on how to do a Hard Reset on the ZTE Blade A5 (factory reset). We recommend that you familiarize yourself with the visual guide called on Android. .
Reset codes (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off your device -> go to Recovery
- "wipe data/factory reset"
- “yes - delete all user data” -> “Reboot System”
How to log into Recovery?
- hold down Vol(-) [volume down], or Vol(+) [volume up] and the Power button
- A menu with the Android logo will appear. That's it, you are in Recovery!
Reset settings on ZTE Blade A5 You can do it in a very simple way:
- Settings->Backup and reset
- Reset settings (at the very bottom)
How to reset a pattern key
How to reset your pattern key if you forgot it and now you can’t unlock your ZTE smartphone. On the Blade A5 model, you can remove the key or PIN in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
Smartphone firmware, ZTE B A5, Video review. It is best to start the ZTE B A5 PRO firmware process by saving the previous firmware version. Step-by-step video instructions on how to update the firmware of the ZTE B A5 P. The camera works with 4 Official firmwares. Official original firmware for ZTE smartphones on our information portal. Programs for firmware ZTE B A5 P
Official and custom firmware for ZTE B A5 P with A 7. Firmware for ZTE B A5 P. The official pre-installed firmware, updated to the fifth version of Android, often causes overload. We invite you to download the most popular programs for flashing firmware on your ZTE B A5 P phone. For 2 days now I have not been able to log in to your website to download the firmware, please give me a link to the firmware for ZTE BLADE A5 PRO. ZTE B A 5 P Official OS firmware
DEAR USERS, DO NOT CONFUSE THE TOPIC, FIRMWARE 5 IS DISCUSSED HERE with simple, clear instructions. TWRP R And of course the patch, also known as the ZTE B A5 P unlock. The ZTE B A5 P firmware runs without a PC, that’s all. Now you can find out a lot about firmware 5. Opening of an official online store in Russia. About the section about the firmware patch note The message has been edited by 74 The ZTE B A5 P firmware also goes through. A large number of firmware can be found at this link
Both official stock firmware and custom original firmware based on ZTE B A5 P Official OS firmware are available for the ZTE B A5 phone. A5 availability of available official firmware and. Download P file Official firmware 4 0. ZTE BLADE A5 PHONE FIRSTWARE UNLOCKING FROM MEGAFON. P, ZTE, sim lock, unlock, 5, unlock, B
Download and unzip the archive disk for restoring the ZTE B A5 P firmware in the root directory C. Official firmware for the Z B A5 P. The firmware that can be downloaded from the company’s official website will help you get rid of constant malfunctions in the ZTE B A 5. Manufacturers A sometimes release new firmware that does not work. ZTE B A5 P firmware. 4 does not have original firmware for ZTE B A5 P
Firmware Official Website Z B A5 P ZTE B A5, 0 Z. When flashing the phone ZTE B A5 P, a. ZTE B GF3 is a good device. Official firmware for the ZTE B A5 P phone. Official instructions for flashing the ZTE B A5 PRO. How to install firmware on ZTE B A5 P? Unlocking and flashing ZTE B A5 P AM A on 5 firmware can be installed in the format
P PMT5777 official. A significant number of official firmware for ZTE B are presented here. Or I'll try this one, the touch does not work in it ZTE B A5 P Firmware Post J152.
One of the largest Chinese smartphone manufacturers, ZTE, announced a line of budget devices in 2016, which includes a classic model for budget employees called ZTE Blade A5 Pro. The model received a good 4-inch display, 1 gigabyte of RAM, as well as a quad-core Spreadtrum processor and 8 GB of internal memory.
The official pre-installed firmware, updated to the fifth version of Android, often causes the smartphone to overload, while it freezes and poorly responds to user actions. You can fix this problem by updating to the latest ZTE Blade firmware. There are two options: via Recovery TWRP and Flashtool. Today we will look at the first one.
How to flash ZTE Blade A5 Pro: step one
First we download it to the computer, then we rename the latter to recovery.img and save it to the root folder of the C:\\ drive. Then you need to download the file with the firmware (700 MB) and save it in the root folder of the phone’s additional microSD memory card.
The downloaded Adb will help us install the drivers correctly. Run the file and then follow these instructions:
- During the installation process, press the letter Y on your keyboard three times, and immediately after it press Enter. This way you confirm your choice;
- After the installation is completed successfully, close the window. Connect the smartphone to the PC in debugging mode: go to the phone settings, and then in the menu item "For Developers" enable USB debugging option. If everything is done correctly, you will see a message indicating that a new device is connected;
- Go to the C:\\ drive, right-click on the white space in the folder and select the option "Open command window";
- Now copy and paste the following commands in order into the line:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot-bootloader
You will see that the custom recovery installation process is complete - the program will notify you about this, after which you can close the window and disconnect the phone from the computer.
Firmware for ZTE A5 Pro smartphone: step two
- Enter recovery mode on your smartphone by holding down the power and volume down buttons at the same time;
- Open item Wipe, and then - Advanced Wipe;
- Check the box next to each item in the list that appears;
- Run a memory cleaner;
- Exit to the main recovery menu and click on Install;
- Find the firmware that you previously saved to the memory card and select it;
- Flash your ZTE Blade phone by swiping to the right.
After 10 minutes, flashing the gadget will be successfully completed, as your smartphone will notify you. Reboot the device by pressing the button Reboot System. And don’t be alarmed, because for the first time a smartphone may take a long time to load, about 15–20 minutes is normal.
When flashing your ZTE Blade A5 Pro phone, namely during the driver installation process, you may see a message stating that some kind of error has occurred. It can be easily solved: you just need to run the file again, only with administrator rights. Also you may not find the menu item "For Developers" in the smartphone settings. For it to start appearing, find the section in the parameters "About the phone" and quickly click on the option 7-8 times "Build number".
How to update the software?
We provide you with different ways to update the software, namely: update using a memory card or update over the air.
To update over the air, you need to connect to a Wi-Fi wireless network or GSM Internet connection and check for updates in the settings.
What should I do if the operating time of the device does not coincide with the operating time declared by the manufacturer?
A smartphone is a complex electronic device that includes the functions of a pocket computer and a cell phone and consumes a large amount of energy to operate these functions. The main amount of energy is spent on the operation of the display module and the GSM transmitting and receiving path. The display brightness is automatically set to maximum in very bright environments (sunny days) or set manually by the user. Maximum brightness consumes maximum energy. When GSM is operating and with stable and stable reception “at maximum”, the device consumes a minimum amount of energy to maintain communication. If the network signal is unstable and weak, the device requires more power to maintain communication. In the case of “Network Search” in an area where there is no network, the device consumes the maximum amount of energy, which is spent on searching for nearby base stations. To reduce your phone's energy consumption you need to:
1. Disable GPS if not required.
2. Disable mobile Internet if not needed.
3. Disable or delete unnecessary unused applications, because they are in an active state and consume the internal resources of the device.
What should you do if your phone freezes, won’t turn on, or reboots?
The cause of rebooting or freezing in most cases is third-party software or programs.
1. Initially, we recommend that you restore the default factory settings (after saving the information you need). If the phone turns on, select the "factory reset" option from the device menu. If the device does not turn on, turn on the device in "Recovery mode" and select "wipe data/factory reset". The method for entering “Recovery mode” is described below in the paragraph “How to enter Recovery mode?”.
2. If resetting to factory settings does not help, update the software. Methods for updating the software are described in the paragraph "How to update the software?".
3. If the software update does not help, contact your nearest ZTE Authorized Service Center.
How to make a backup of data, a notebook or a “Back-up”?
There are 3 ways to do a “Back Up”:
1. In the phone settings, in the "Backup and reset" submenu, check the box for recovery.
2. You can transfer the necessary information to your computer using a USB cable.
3. You can make a “Back Up” using a third-party program.
What should I do if I don’t remember the password or pattern to unlock the screen?
If you have forgotten the pattern or digital password to unlock the screen, you need to perform a reset to factory settings: 1. Turn on the device in “Recovery mode” and select “wipe data/factory reset”. 2. If the procedure is not completed, you must contact the ZTE Authorized Service Center.
How to use wireless networks (Wi-Fi, BT)?
1. In the device settings, turn on Wi-Fi. Click on the Wi-Fi icon and you will be taken to the Wi-Fi network management screen.
2. The device will automatically begin searching for active Wi-Fi networks in the access zone from 5 to 50 meters from the access point (depending on the power of the access point).
3. Select the network you need and click on it. If your wireless network is password protected, enter it.
4. Once connected to the desired network, the Wi-Fi icon will appear on the main screen of the device.
How to enable Internet distribution on your phone (USB modem or WiFi router)?
There are two ways to enable Internet sharing on your phone. The first way is to enable distribution as a USB modem, the other is to enable distribution as a WiFi router. Make sure that your device has access to the Internet in order to distribute it:
1. USB modem - this method is used to distribute the Internet to a computer. Connect your phone to your computer using a USB cable and allow data access. "Settings->Wireless networks->More" Modem mode - check the USB modem box." Then the phone will start distributing the Internet to the computer. To stop the distribution, uncheck the USB modem or simply disconnect the cable connection.
2. WiFi router - make sure you have a stable Internet connection via a mobile network or USB. "Settings->Wireless networks->More" Modem mode - check the "WiFI access point" box. To secure your wireless connection, tap the hotspot icon and then tap WiFi Hotspot. In this menu you can set a name and password for your wireless WiFi connection. Your phone will start working as a WiFi router. To stop distribution, uncheck "WiFi router"
How can I quickly see the charging status?
During charging, press the power button. The battery charge status will be shown on the main screen of the phone.
Why is the amount of free memory on the device less than stated by the manufacturer?
Unlike the processor, which has its own built-in memory, other devices, such as a video processor, audio processor and other devices included in the elemental base of the device’s central board, consume user memory resources. A certain amount of memory is reserved in advance for internal needs, but in case of overflow, user memory is used.
What types of device locking can be used?
There are 3 types of screen lock. Select one of the lock types in Settings -> Security -> Screen lock.
1. Locking with a graphic key
2.PIN code lock 3.Password lock
What is the operating temperature of ZTE phones?
The operating temperature ranges from (-10C) to (+50C).
What does ROOT mean?
ROOT is "administrator rights". ROOT makes it possible to change system files, change the system, install test programs and perform other actions. ROOT rights are hidden from users, but can be activated if necessary.
Be careful, careless handling of ROOT rights can harm your operating system.
How to enter Recovery mode?
In the off state, simultaneously hold down the volume button (increase +) and the power button.
What should I do if the battery is not charging 100%?
The device's battery is designed in such a way that it dissipates part of the received charge and can subsequently be recharged. This feature is designed to protect the battery and increase its performance. If the battery does not charge more than 80%, contact a ZTE Authorized Service Center.
How can I add a Google account to the device?
1. When you turn on your smartphone for the first time, you will be prompted to register a new Google account or use an existing one. But this is not a mandatory procedure.
2. To add an account at any time, you can register a new one or use an existing account: Settings->Accounts and “add account”.
How to enable USB debugging? How to get access to the "For Developers" menu?
Enter "Settings->About phone->Tap on "Build number" several times. Then you will have access to the "For Developers" submenu. In this submenu, "USB debugging" and other functions for developers are available
How to connect your phone to PC?
To install the driver (automatically), do the following:
1. Connect your phone to your computer.
2. When connecting, select "Virtual Disk" or "Virtual CD" depending on the model.
3. The computer should detect an additional disk, run “Autorun.exe” on it and install the driver
4. If the drivers are not installed, go to "Settings->For Developers" and enable the "Disk driver". (click on "Build version" 10 times
5. When you turn on (USB Debugging), the driver will also be automatically installed.
What do the letters E, G, H mean?
When data transmission is active on the phone, the following symbols appear on the status panel (signal reception indicator, battery capacity, etc.):
- E means EDGE protocol is active
- G means active operation of the GPRS protocol
- H means active operation of the HSDPA protocol, which is part of WCDMA