The sensor on the iPhone 6 is not working well. The sensor stops working on the iPhone, what to do?

If your sensor stops working, there are various reasons. But most likely the update to iOS 11/12 is causing it. In addition, software failure, iPhone overheating, and display contamination also lead to various breakdowns. The following situations are listed:

• The sensor stops working after a while
• The sensor stops working after locking the screen
• Sensor stops working after 10 seconds
• The sensor on the phone does not work after a fall
• The sensor on the phone does not work after water
• The sensor stops working in the cold

And when the above occurrences occur, they should be corrected. If, after a fall and water, the screen does not respond or is broken, then you need to replace it with a new sensor at the service center, and extract the data on the device from an iTunes and iCloud backup in advance, avoiding file loss. In other cases, system failure or malfunction, we recommend the Tenorshare ReiBoot program, which will allow you to fix for free the fact that the touch screen does not respond to touches.

What to do if the sensor does not respond to touch

The free Tenorshare ReiBoot application is a professional utility that can enter and exit recovery mode. And entering and exiting recovery mode can resolve most freezes.

1. Download and install Tenorshare ReiBoot, connect your iPhone, iPad and iPod to your computer.

2. Click "Enter Recovery Mode", and enter the device into recovery mode,

3. Click "Exit Recovery Mode" and exit the device from recovery mode.

In addition, Tenorshare ReiBoot can fix problems with iOS 11, for example, it freezes on the apple, reboots cyclically, freezes when updating the firmware, freezes in headphone mode, black screen on the iPhone but it works, the battery drains a lot. If your iPhone is disabled, connect to iTunes, then you can reset the lock password using Tenorshare ReiBoot.

How to restart your phone if the sensor does not work

iPhone 5s sensor stopped working, and then the screen turns black, in this case, how to restart the iPhone? A simple and fast way is to force a reboot. Press and hold the Power button and the volume down button on the left at the same time for 15-20 seconds, after which the Apple logo will appear on the screen.

How to reanimate the sensor on your phone

1. Launch Tenorshare ReiBoot, after connecting the gadget to the computer, click “Fix Now”.

3. After downloading, start restoring, and wait a little, the restoration is successful.

If it was not possible to restore the iOS system, then change the download path and try again. If the sensor still does not respond well to touches, contact the service center. The reason may be that something unpleasant happened to the hardware.

The reason that the iPhone screen does not respond after touching your finger may be moisture, dust getting inside or mechanical damage. The main indicator of a touch display malfunction is the partial response of the touchscreen to pressing or randomly typing text. In some cases, the iPhone screen does not respond to touches because the smartphone is frozen. By following a series of procedures, you can determine why the display is not working properly.

Common causes of breakdowns

Most often, the iPhone screen does not respond to the touch of a finger after a fall, liquid ingress through cracks, or due to other mechanical damage. Quite rare causes of problems are the following defects:

• touch screen wear
• high RAM usage (the iPhone screen has stopped responding and the buttons are not responding because the phone is frozen)
• iPhone system malfunction (the smartphone does not respond to button presses)
• overheating of iPhones (in such cases, part of the screen does not respond to touches)

It is easy to determine the presence of problems in the operation of the sensor; the following failures are observed:

• The iPhone screen partially or completely does not respond to touches
• In certain parts of the display, the iPhone screen freezes when touched with a finger
• The screen responds to touches with a delay
• Pages don't turn correctly
• the sensor has stopped responding to touch and is typing text spontaneously

To avoid problems with iPhone displays due to mechanical damage, the manufacturer recommends gluing glass or film to the surface of the screen.

What to do if the sensor stops working

If your iPhone screen stops responding, you don't always need to replace the display. In some cases, you can independently determine the cause of the problem and fix it. First, eliminate the possibility of damage to the case or screen surface.

If internal components break, only a qualified specialist can repair the iPhone.

If your iPhone screen freezes, follow these steps:

• use the power button to reboot the device (you need to hold the button for a few seconds)
• remove unlicensed software from iPhone
• reflash the device

If after performing these steps the iPhone screen freezes and there is no response to button presses, you need to completely reboot the device. To do this, you need to simultaneously hold down the “Home” and “Power” buttons for 20 seconds. The smartphone will then erase the RAM and restart the phone.

If after this part of the screen or the entire display still does not respond well to finger presses, the sensor must be replaced.

Installing a new display module

The iPhone screen cannot be replaced separately from the sensor or touchscreen. If the display does not respond well to touch due to damage, then a new module must be installed. Qualified specialists can identify the exact cause of problems using computer and mechanical diagnostics. The technicians will determine exactly why the smartphone is frozen, the device is not rebooting, or part of the screen is not working.

If the sensor does not respond well to touch or has stopped working altogether, and the programs do not respond to button presses, then contact the Yudu specialists. Our specialists will install new screen modules on iPhones of all generations in a high-quality and professional manner.

Experienced technicians guarantee:

• quick and accurate mechanical and computer diagnostics of the device (they will determine exactly why part of the display does not respond to touch)
• comprehensive repair using original spare parts
• troubleshooting at home or in a service center at a time convenient for you

Technicians also provide additional services, such as replacing buttons or worn-out parts of the phone.

Some lucky iPhone owners sometimes have to deal with a rather unpleasant problem - the sensor on the iPhone 5S is glitchy. There can be many manifestations and reasons too. But, not the point, it’s more important to know what to do now.

Sometimes you can do it on your own, but in some particularly difficult cases you cannot do without a trip to a repair shop. Therefore, in order to decide whether to take the device for repair or heroically save it yourself, you need to figure out what the problem is and what caused it.

So, the main signs of problems with the iPhone touch screen:

• The screen does not respond to touch or only responds in certain areas. This may happen all the time or only occasionally;
• The response to touch occurs with a delay;
• The smartphone begins to live its own life: read Chinese blogs, call the Prince of Monaco, and also send vulgar SMS to friends, family and boss;
• Each manifestation has its own reasons, and, naturally, in order to troubleshoot, it is necessary to find out why it happened.

Why doesn't the touch screen work?

If the sensor does not respond to touch at all, this is likely due to mechanical damage, such as a fall. This can also be caused by water penetrating inside the housing.

But it is possible that the problem lies with the OS, especially if the screen is only partially not working. The cause of an operating system glitch may be a simple failure/temporary freeze or an incorrect update.

Also, a certain program, usually downloaded from an unknown source, can cause a sensor to be disabled or malfunction. And it doesn’t have to be “bad” - it just may be incompatible with the current version of the axis or, in general, be illegal among Apple developers.

If the iPhone 6 or 5c suddenly acquired artificial intelligence, and the “rebellion of the machines” took serious turns, then this is probably the work of a virus. Previously, there was no infection for mobile devices, but those days are long gone. Often this is the Autoclicker virus.

If the screen module has already been replaced, it is possible that it was installed incorrectly, something was damaged in the process, or it itself is of poor quality. There is no option - to take it back to the would-be master.

What else can affect the screen's performance?

• The screen matrix malfunctioned;
• One of the device parts has broken down, for example, the corresponding microcircuit;
• Internal contamination and resulting short circuit

In the latter cases, you cannot do without professional help, but in other cases there is a chance to cope on your own.

What to do if the sensor on your iPhone is not working properly?

The very first step that works is to reboot the device. This applies to any electronics. In the case of an iPhone, you need to hold the Home and Power buttons for 10-15 seconds. After this, the device will reboot, and perhaps everything will start working.

If it doesn’t help, then more radical methods will be required - a full return to factory settings or rolling back the latest updates. In this case, all data will be cleared, so it is worth making a backup on your computer before starting this procedure.

It is also possible that dirt has gotten under the protective film of the screen, especially if it is glued poorly. Then you need to remove it, wipe it and stick a new one.

Sometimes, after a fall, microcracks appear on the protective glass, and air and moisture enter the space between the glass and the screen. An oxide film appears on the touchscreen, and it stops responding to commands or does it poorly. There are no options here - the glass is removed, the screen is wiped and a new protective surface is installed.

It could also be the bumper, which sometimes runs over the screen. Therefore, if everything works fine without it, the protective accessory needs to be replaced with a more suitable one.

As already mentioned, the operation of the axis can be affected by a certain program. For example, the Zillow application leads to similar consequences, especially on the iPhone 5S.

And finally, smartphones do not have a cooling system, so when the processor overheats, for example, on a hot summer day, a protection will be triggered that disables the control functionality. Here you just need to turn off the device and let it cool down a little.

How to prevent it?

If all else fails, you will have to go to the nearest workshop. And there they will either make, probably, expensive repairs, or offer to replace the device with a new one.

Therefore, it is better to follow simple rules that will significantly reduce the risks of such breakdowns.

To do this you need:

Conclusion

In some cases, the suggested tips help, but it is safe to say that if the sensor has started to work intermittently, then this will probably continue in the future.

Often users of modern Apple smartphones are interested in what to do if the sensor on the iPhone is faulty, for example, after replacing the glass. And all because the entire operation of mobile devices with touch displays is directly related to the high sensitivity of the screen to pressure, with which you can use the gadget’s functions, view menus, and work with documents. If the sensor stops working, even after replacing the display, you lose the opportunity to fully realize your needs, which are often very necessary to fulfill.

Why does the sensor on a smartphone stop working?

The touchscreen on an iPhone can start to glitch completely spontaneously, for example, after replacing the display or if the smartphone has been dropped. As a rule, the reasons why the touch screen on a particular phone model does not respond to touch or the touch screen works intermittently are associated with mechanical damage to the device. To protect the display from impacts, you can install a protective glass on it or replace the film on it. Without additional protection, for example, if it falls, the touchscreen on the iPhone sometimes begins to freeze or completely fails.

Also, the reasons why the iPhone screen glitches and the touchscreen stops working are the following:

• liquid entering the device body
• crash after replacing software
• failure to comply with manufacturer's requirements when replacing display glass

If you are sure that the iPhone has not been dropped or water has been spilled on it, but it does not respond to touches, does not turn on, or does not respond correctly to presses, then most likely there is a software malfunction that you can fix yourself.

How does a malfunction of the display module manifest itself?

There are several signs that indicate that the sensor is faulty or the touchscreen on the iPhone is not working. These include the following:

• lack of sensor response to touches in a certain part of the screen
• ignoring any clicks on the display, which indicates that the sensor is lagging
• random operation of the gadget after it has been dropped or after replacing the glass (applications and documents open on their own)

Cleaning your smartphone screen

When starting to restore the functionality of a sensor that does not work well, freezes and slows down after replacing the glass or after you dropped it, you must first clean the display of your smartphone. You will not harm the phone in any way, but you will improve the connection, and perhaps the sensor will stop freezing and slowing down. This method will help if the display does not turn on, does not respond to touch, or the sensor periodically glitches.

If the sensor does not work well when buttons are pressed, and it often freezes or slows down, wipe the screen with a soft, lint-free cloth moistened with glass cleaning liquid for various phone models.

How to reboot your phone

If the touchscreen on an iPhone, after replacing the display or for another reason, periodically freezes or the lower part of the sensor does not work, then you can fix the problem by rebooting the phone. When the sensor on your iPhone fails, do the following:

• Press and hold the power button and the Home key together for 20 seconds
• wait until the device restarts and the Apple logo appears on the display
• check if the sensor is working by touching any icon

This instruction will be one of the possible ways to restart your smartphone if the touchscreen does not work or any part of the iPhone sensor stops functioning

Check your accessories if your screen is frozen or won't turn on

There are situations when it is accessories that interfere with the normal operation of the display module and because of them, the iPhone screen of any model becomes dull and glitchy when buttons are pressed on it. For example, if the original protective film was glued to the glass incorrectly, the sensor stops working completely or becomes dull only in the lower part.

In addition, today you can buy any bumper for an iPhone, but not all of them can boast of high quality. If the bumper you purchased blocks the top or bottom of the display, it will interfere with the normal functioning of its module, and the screen will begin to glitch. To understand whether this is the reason why the touch screen does not respond, you need to remove the back cover and test the operation of the touch screen on the phone. If the problem is in the bumper, then the operation of the sensor, which sometimes freezes, will then be restored. If, after removing the accessory, the screen on the iPhone does not stop becoming dull and glitchy, then you need to further look for the cause of the malfunction of the display module.

What to do if the display module is frozen or does not work well

If rebooting the device does not produce results and, as before, the sensor is faulty, or it does not respond to pressing, then most likely the problem lies not in a software glitch, but in a malfunction of the internal components of the phone and you will have to replace the failed part. In this case, you should contact professional technicians who will diagnose the screen, determine the sensor malfunction and repair the phone.

If the keys periodically glitch and the sensor lags after you dropped the phone, or the display does not respond to pressing, a specialist will first determine the cause of the malfunction and then eliminate it. After diagnostics, the technician will tell you about the condition of the smartphone that was dropped or flooded with water, and why the sensor froze or did not work well. If required, he will carry out a high-quality replacement of the display screen.

In what cases will it be necessary to change the display?

The iPhone screen of any model is regularly exposed to various influences, which is why the touch screen may not respond to touches. Also, scratches on the display can cause the lower part of the sensor to not work. The solution to the problem when the entire screen or part of the iPhone sensor stops working is to replace the glass or install a new module.

You will have to change the display when the sensor malfunctions or displays information incorrectly in the following cases.

Greetings to one and all! I didn’t want to write the title of the article exactly like that, but it’s very difficult to find another word other than “buggy.” Very succinctly (the mighty Russian language is rich and beautiful!) It describes all possible problems with the screen, which lives on its own - keyboard buttons are pressed, desktops are scrolled through, applications are launched, and all this without your knowledge. And the display itself does not respond to pressing!

It would seem that the situation is fantastic and somewhere even mystical, but... in fact, there is nothing strange in this - everything has a logical explanation. Which? Now we’ll find out everything! But first, let's determine after what actions the screen of your iPhone or iPad can begin to take on a life of its own, create chaos, go completely wild and frighten its owner.

There are not so many of these actions:

1. Firmware update.
2. Physical damage (fall, impact, moisture).
3. Replacement or repair of the display (nuances may apply).

That's all. Although no, there is another option - none of the above happened, and the screen suddenly began to “glitch”.

Let's start with general preparation of the device, which will help eliminate some standard issues that cause the touchscreen to behave in such an incomprehensible way:

• If there is film or glass stuck to the device, remove it.
• Wipe the screen thoroughly with a soft cloth. Do not use special cleaning fluids; sometimes they can simply ruin the oleophobic coating.
• To rule out a software problem and errors in iOS, do this.

Yes, everything listed above is quite banal, but it can help. However, these are not all the actions that can be performed in order to improve the operation of the display.

And the first thing you should pay attention to is non-original power supplies and Lighting cables. Although most likely we will talk about the wires (the adapter itself, as a rule, does not greatly affect the operation of the device). Yes, they can spoil your nerves.

Once I myself encountered this and saw how a person’s phone was charging and at the same time periodically lit up, the screen unlocked, pressed on its own, and characters were typed on the keyboard. To be honest, I was very surprised how the iPhone hasn’t called somewhere on its own yet!?

After a short conversation, it turned out that although this bothers the person, he simply does not want to buy an original wire (I rarely use it, and it will do!). The fact that spontaneous pressing of the display is not the worst thing that can happen, and the battery will definitely have to be changed soon, did not interest him.

Conclusion one: if the iPhone display lives its own life and does not respond to touches only while charging, the charger is most likely to blame. Replace and use only certified accessories.

If everything is ok with the charger, then you should move on to the next reason - these are low-quality display modules. There are simply a huge number of them, but there is an explanation for this:

1. Many models are simply wildly popular, for example the iPhone 5S.
2. China will help everyone.

Here you have a large number of screens of varying degrees of quality. Moreover, they can be installed both during repair and on “new” (in fact, restored from an unknown location) iPhone. And if you are unlucky and the screen is set completely to the left, then accidental clicks and other pleasures of life are guaranteed.

By the way, a characteristic feature of this defect is that after blocking/unlocking the device everything returns to normal, but for a while, and then it starts to “glitch” again. This can appear either immediately after repair/replacement or after updating iOS. What to do in this case? Option two:

1. Set to normal display.
2. Try gluing film or glass.

The most interesting thing is that some workshops, knowing the quality of the display they are installing, when replacing a module, stick a sticker on the screen as a “gift”. Often this is done just so that the iPhone or iPad display behaves correctly and does not live its own life. Brilliant move! The difference between a good and a bad screen is big, but the price of the film is small. And everyone is happy: the client thinks that the service is good - he even glued the film, and the workshop itself won money.

Conclusion two: if the iPhone display is “buggy”, most likely it is simply not of very good quality. Replacement required. There is also a more budget-friendly solution that helps many people - sticker of film (glass). With the iPad the situation is completely similar, only it’s harder to glue :)

There is another reason why the touchscreen may behave strangely. But here it would be more correct to say that it will not process clicks at all, and not “just” trigger in the wrong place.

Perhaps we are talking about the display sensor controller and this is very sad. It can be damaged if it falls, gets bumped, gets moisture inside the gadget, or is missing. Only a few service centers have the skill to resolder it (the procedure is done so as not to replace the entire motherboard). Well, it also costs money accordingly - of course, cheaper than completely replacing the board, but still...

Conclusion three: the most serious malfunction in which the iPhone display is pressed by itself is a breakdown of the screen sensor controller. Compared to previous problems, it is rare and much more difficult to correct.

This is the unpleasant conclusion at the end of the article...

However, I really hope that all the “glitches” of your iPhone screen will be cured by simply replacing the charger, wire, or, in extreme cases, a sticker of film or glass. And it won’t come down to complex repairs at the service center. Let it be so!

P.S. And to increase the chances of a successful outcome - put “like” and click on the social network buttons, +50% luck is guaranteed :)

P.S.S. And of course, if you have questions or practical tips on how to overcome a “glitchy” display, be sure to write in the comments!