Why is there no microphone in the Skype sound settings? Solving a microphone problem in Skype
I'm facing the same problem as it doesn't work in Skype. large number users. If this happens to you, then you will not be able to make calls through the program; more precisely, the interlocutor will stop hearing you. Of course, there is also a chat where you can exchange messages, but not everyone is happy with this state of affairs. Moreover, most often, fixing the problem is not difficult.
Device problems
If you have problems with the microphone on Skype, then first of all you need to determine whether the device itself is working. To do this, you need to go to and find it in the list provided. can be connected separately or combined with a camera or headphones. For laptops this device is already built-in.
Advice. You can launch Device Manager through the Computer by right-clicking on it. Go to the Management section and open the desired section.
If you do not find the name of your microphone in the Device Manager list, then the problem may be quite trivial. For example, the answer to the question why Skype does not see the microphone is simple - you simply did not connect it or connected it incorrectly. Therefore, if the device is external, then double-check all connectors, cables, etc. Don’t forget to install the drivers for it, which are almost always included.
Problems with Skype
If you have done all of the above, and the sound still does not appear, you will need to check the program settings. To do this, launch Skype and do the following:
The name of your microphone should be set next to Microphone. If there are several devices, then click on the triangle in the corner and select the one you need. You can experiment by checking all connected microphones one by one. Also, check the box (if it is not there) where automatic configuration is offered. Also drag the sound slider to a higher volume.
Checking your microphone in Skype
If you have installed drivers for the microphone in Skype, and also connected the desired device, then you should check how it works. In Skype this is done using standard tools. To do this, launch the program, and select Echo/Sound Test Service among your contacts. Click Call, after which a connection to the server will occur. The system will prompt you to record a message. If you can listen to it after recording, then all program settings are made correctly.
If you have installed drivers in Skype and the microphone still does not work, then perhaps your operating system does not want to work with the device for some reason. Then you will need to do the following:
- go to ;
- select the section Sounds and audio devices;
- go to the Audio tab;
- next to the inscription Sound recording, click on the Volume button;
- drag the slider higher;
- click OK.
As you can see, if the microphone does not work in Skype, there can be many reasons. First, you need to determine whether the device is connected correctly and whether the necessary drivers for it are installed. If you didn’t find anything here, then go to the program’s sound settings. If there are no problems here, you can go directly to the parameters of audio devices in the system. Sometimes the situation is resolved by reinstalling Skype or updating the application to the latest version.
Skype is one of the most popular and accessible instant messengers, with which you can communicate via text chat and audio-video communication. But often inexperienced users Having registered in Skype and called the interlocutor, they find out that they cannot be heard - the microphone in Skype does not work. Why does this happen and what to do? This is usually due to incorrect settings of the audio system of your computer or laptop.
The main problem due to which the microphone does not work in Skype is crooked installed drivers sound. Sometimes it may not be configured software, for example, Realtek HD Audio.
Let's look at why the device most often disconnects in Skype. There is nothing complicated in setting up this program to do the necessary actions - you just need to check the connection of the device to the computer and its settings in the system. Some devices are automatically configured after connection, but if you are reading our article, this is not the case.
Find the sound card of your computer, whether it's a laptop or a desktop machine. The microphone on the audio card is inserted into a special connector called Jack 3.5. Usually there are several connectors of different colors on the board. For headphones or speakers there is a green input, for an analog input there is a blue connector, and the one needed for sound recording is pink. Almost all computers have colors sound card exactly like that. The only difference is that on netbooks and ultrabooks the inputs can be on the right or left, while on system unit behind.
On computers that do not have an audio card, the audio inputs are located on motherboard. They are located on the built-in module - a small gray panel with three connectors in blue, pink and green. As in the case described above, the microphone input is designated pink. and wait a few seconds - your computer system should automatically detect the device. If the person you are talking to on Skype cannot hear you, you will have to proceed to the following steps.
Drivers
If the device does not work, first of all you need to check whether you have installed sound drivers. When you hear sound from the speakers, most likely yes. To double-check, open the device manager (right-click on the “Computer” icon in the “Start” menu). You can also find it in the control panel. Open the "Sound, video and gaming devices" section. With the “firewood” installed, identified devices will “hang” there. But if there are unknowns (indicated by a question mark), go to the website of the laptop manufacturer or motherboard manufacturer, and download sound drivers from there.
Selecting a microphone in devices
When using a laptop with a built-in microphone, you will also have to make system settings. To do this, find Realtek dispatcher HD Audio – it is located in the tray in the lower right corner (next to the clock), and in the control panel in the “Hardware and Sound” section. IN open manager Go to the “Microphone” tab, where you select the desired device and click “OK”. Here you can adjust the sensitivity, turn off the second device, and enhance noise and echo suppression.
A quick way to check if you can see personal computer microphone: open the control panel, go to “Hardware and Sound”, select “Sound”. On the recording tab you will see all devices designed for sound recording.
Important: if the microphone is not detected in the audio manager and system settings, it may be broken or the connector is damaged sound card. You will need another device to check.
Setting up a microphone in Skype
In the Skype window, find the “Tools” menu, there click on the “Settings” line. In the window that opens, go to the “Sound Settings” tab. Here you can select the microphone and speakers you need and adjust their volume. There is an automatic configuration option.
After saving the changes, check if the microphone works in Skype. An easy way is to call Echo Sound support. If everything went well, the slider in “Sound Settings” will move when you start speaking.
We hope our tips helped you set everything up as needed. If all else fails and the device still does not work, you will have to check its functionality on another computer, or connect a third-party microphone to your PC.
Skype is probably the most popular program to communicate via voice and video on the Internet. Therefore, it is not surprising that there are a lot of questions related to this program. One of the most frequently asked questions about Skype goes something like this: My microphone is not working in Skype, what should I do?
Unfortunately, there is no simple and quick answer to this question. There are too many different problems that can lead to this situation. In this material we will look at several of the most common of them.
Problem #1: Sound card drivers are not installed.
If your microphone does not work in Skype, then first of all you need to check your sound card drivers. If the drivers are not installed on the computer, the microphone will not work.
To check your sound card drivers, press the combination Windows keys+ R and in the window that opens, enter the command “mmc devmgmt.msc”. This will open the "" window. In this window you need to open the section “ Sound, gaming and video devices" If drivers for the sound card are installed, then your sound card should be displayed in this section.
If the drivers are not installed, then there will either be no sound card at all or it will be indicated by an icon with a question mark. If this is your situation, then you need to download and install the latest drivers for your sound card.
Problem #2: The microphone is not connected correctly.
Another common cause of microphone problems in Skype is incorrect . In order for the microphone to work, it must be connected to the microphone jack. This connector is usually highlighted in pink. There should also be a small drawn microphone icon next to the microphone jack.
In addition, many microphones have special switch to turn on and off. If there is such a switch, then obviously it should be in the “On” position.
Problem #3: Microphone is disabled in system settings.
You also need to check system settings sound. Perhaps the microphone is simply muted there. To do this, right-click on the speaker icon located on the taskbar. Then in the menu that opens, select “ Recording devices».
As a result, the “Sound” window will appear in front of you, open on the “Record” tab. All your audio recording devices will be displayed here. If your microphone is disabled, you can enable it by right-clicking on it.
Problem #4: The microphone works, but is too quiet.
Many users think they are using Skype, when in fact it works, but is very quiet. To fix this problem, open " Recording devices"as it was described above.
After that, select your microphone and click on the “Properties” button.
This way you will be taken to . Here you need to go to the “Levels” tab and its strengthening.
Problem #5: The front panel is not connected or configured correctly.
If you connect a microphone to the front panel desktop computer, then there may be a problem with connecting this front panel to the motherboard. If it is not connected correctly, the microphone will not work. To check this, simply plug the microphone into the jack on the back of your computer.
It is also possible that if the front panel is connected correctly, it still does not work. This is usually due to incorrect settings. The fact is that the front panel can be connected in two ways (AC97 and HD Audio) and the sound card settings must indicate which method is used.
If you used one method to connect the front panel, but you specified another in the settings, the headphone and microphone jacks on the front panel of the computer will not work.
Problem #5. Incorrect settings on Skype.
If you have ruled out all the reasons described above, but the microphone in Skype still does not work, then you should check. To do this, open the “Tools – Settings” menu and go to the “Sound Settings” tab.
Here you need to make sure that the correct microphone is selected and enable a feature called “Allow automatic setup microphone."
We have all long been accustomed to the fact that communication at a distance using free program called Skype - this is a normal thing. There is no point in talking about the advantages of this software once again, because there are very, very many of them. Despite the almost complete absence of disadvantages, it happens that problems still exist. For example, the microphone in Skype does not work or the connection is poor. There are reasons for all this, which we will talk about.
Some general information about Skype and common problems
So, thanks to this program we can communicate with people from different countries and regions. To do this, you need a headset, that is, a microphone and headphones, as well as a high-speed Internet connection. If the state of the latter depends entirely on the provider, then the former is entirely your business. You can buy cheap headphones and a microphone and complain about bad connection and audibility, or you can, on the contrary, buy good headset, which will be a pleasure to talk to. Please note that you can buy a webcam that has a built-in microphone. In this case, a headset is not needed. You will hear the person from the speakers and speak into the webcam. As for typical malfunctions, these are damaged USB ports, poor contact, Skype not configured properly and much more, which I would like to talk about in more detail. Let's pay more attention to problems with the microphone. This type of problem occurs most often.
The microphone does not work in Skype
First of all, I would like to say that there can be many reasons. Moreover, they can be associated both with problems with the headset and with failures in your system. The most important thing here is to determine what caused the malfunction. Do not rush to throw away headphones with a microphone, as they may be in working condition. As practice shows, only 35% of cases are associated with a headset malfunction, the rest are the fault of your system. First, let's figure out where the microphone is built in. There are three options: on a webcam, combined with headphones, or used as separate device and connects via USB port. Now let's try to solve the problem. To do this, log in to Skype and go to the “Settings” section. To be more precise, we are interested in sound. If for some reason the microphone does not work in Skype, then it is in this menu that you have to solve this question. Now let's move on to the practical part.
Why doesn't the microphone work on Skype?
As noted above, there may be several reasons. Now let's look at the settings, changing which can lead to a positive result. First of all, pay attention to the special scale. To be more precise, there are several such scales. One is responsible for the microphone, the second for the speakers, but we are interested in the first. Device activity is displayed green. For example, you said something, the scale is filled, but if you are silent, it is empty. If you speak and nothing changes, then this indicates that there is no signal. The first thing to do is check the microphone contact. If it is combined with headphones, then the plug should be orange. Check it out. Also, do not forget to make sure that the port is working properly, as it may become damaged due to active use.
Fixing microphone problems
Let's try to figure out what the reason is. First, go to the device manager. You can access it either through “Start” - “Control Panel” or through “My Computer” by right-clicking on the shortcut and selecting “control”. Here you should find your microphone. If it is combined with a camera, it will most likely be displayed as a USB video device, but if it is a headset, then as an audio device. In case you haven't found desired device, this indicates that the computer or laptop does not see it. The reason may be uninstalled drivers(if any) or poor contact, for example, broken wires. If the microphone does not work in Skype, you can try reconnecting the device. If the element we need is displayed in the device manager, then the problem is most likely in the program settings. Let's look at this in more detail.
Setting up a microphone in Skype
Let's try to figure out a little about what can be changed directly in the program. First, see if the microphone is turned on at all, since it happens that you once accidentally turned it off or the program itself did this during installation or connection. There should be a corresponding checkbox in the sound settings. We also install automatic device configuration. Please note that in Skype you can choose one of several microphones; you may have a different device by default. If necessary, change it to the one you need. Check the sound level that is displayed in the tray, perhaps its absence is the reason for everything. By double-clicking on the icon, you will go to the “volume” menu, where you can perform all the necessary manipulations.
Problem with drivers, what to do?
To check if you have installed latest updates, go to device manager. We are looking for our microphone. If in its line you see a yellow triangle with an exclamation mark inside, then this indicates that everything is to blame incorrect connection or drivers. If your microphone uses a 3.5 mm jack, then the first thing you should check is whether you have mixed up the sockets, that is, perhaps you connected the headphones as a microphone, and vice versa. As for updating drivers, everything is simple. It is advisable to download them from the official website. This will guarantee uninterrupted operation of the device. By the way, you can install the driver from the device manager; to do this, you need to right-click on the microphone and go to the “Properties” tab, there will be a line “Update driver”.
If you have tried all of the above, then most likely the microphone in Skype does not work solely due to mechanical damage or a broken wire, which, by the way, cannot be detected with the naked eye. You can try to fix the situation yourself. For this you will need a soldering iron and tin. Once you locate the damaged area, solder the wires and use insulation. U this method there is one drawback: the sound may not be transmitted so clearly, so the interlocutor will have difficulty hearing you. If you are using an expensive branded headset and it is still under warranty, then you can take it to the place of purchase. If the cause of the breakdown is not your fault, then I will repair the device for free or exchange it. If you are using a headset, the headphones work, but the microphone does not, it is quite possible that it is broken or disabled in the mixer settings.
Conclusion
An operating system failure should not be ruled out, especially if there is no good antivirus program. Clean the registry, reboot the system and run Windows scan for the presence of viruses. Perhaps this will help. In any case, you need to try everything that was written in this article; most likely, some of it will help. However, it is impossible to say what exactly. It is also recommended to update Skype to the latest version; this can be done directly from the program. If, in addition to the microphone, your headphones or camera do not work, then it is recommended to check the availability of drivers, the connection of all necessary wires, etc. That, in principle, is all that can be said about troubleshooting and troubleshooting.
Microphone not working on Skype? Then you need to configure it.
Don't know how? Now we will tell you.
There is absolutely nothing complicated about this. The main thing is to strictly follow our recommendations.
In order to set up microphone in skype, you will need:
- Skype installed. You can read about how to register for this program here;
- a microphone of any brand and configuration that fits your PC or is built into your laptop.
All manipulations for setting up a microphone in Skype are performed in this program. No additional actions on the computer are needed.
First of all, you need to make sure that on your device - latest version Skype (read more about how to install it here).
Before you start following our instructions, you need to make sure that the microphone is connected to your computer (and the one built into the laptop is working). If Microphone doesn't work on Skype, in this case, our advice will definitely be useful to you.
So let's get down to business - it's simple and quick.
First stage - launch
In order to launch Skype, the most basic thing is to click on its icon on the desktop. You can press start and find it in programs.
The second stage is the search for tools
Go to the “Tools” section, then to “Settings”, as shown in the figure.
The third stage is setting up
In the “Sound Settings” section, adjust the microphone volume.
Stage four - checking the volume
To check the volume in the microphone, you need to say something into it. If during your response the “Volume” bar turns green, it means you did everything right. Then you can follow the recommendations for checking columns on Skype, described in the sixth step. If the strip remained as it was gray, this indicates that the microphone is not working. How to turn it on, read on.
Stage six - eliminating the problem
First you need to click as shown in the diagram. There will be a couple of lines for you to select. Click on each line one by one and repeat the steps described in the fourth step. If it doesn't work, you need to check all the lines until the expected result appears.
If you still can’t do anything, there are several options:
- the problem is in the microphone (maybe it is faulty or incorrectly connected); driver installation is required (in exceptional cases);
- he doesn't fit operating system devices.
Then you will have to connect it to the computer on the control panel. Go to “Start”), select the “Sounds and audio devices” option, from where we go to the “Audio” tab.
Does the message “Record sound” appear? Yes - then you need to check the microphone volume, as shown in our diagram. If it’s different, try to correct it, and then “OK” in the volume and sound settings and check again.
If none of the above helps, you will have to work with the field (as in the bottom picture) and set other values. To do this, go to the control panel again (via the Start menu) and click “Sounds and Audio Devices,” then go to the “Audio” tab and check the microphone again.
Stage six - checking the speakers
Let's check if the speakers work on Skype. To do this, press as shown in the diagram. If you can hear something in your headphones or speakers, and the “Volume” bar turns green, everything is fine. You can safely proceed to the last eighth stage.
When you hear nothing and the bar is still gray, it may well be that the sound in Skype is not working. Then you will need " Useful advice", and if nothing works, we carry out the actions described in the seventh step.
Useful advice. If there is no sound on Skype, then first of all you need to check the connection of the speakers to your computer. If they are connected, then you need to make sure that the sound is turned on on the computer itself. If yes, a blue ball should appear on the right side of the “Volume” bar. It is in a different place, you need to click on it and move it to the right without releasing the mouse. If these actions are unsuccessful, move on to the next stage.
Seventh stage - sound settings
At this stage we will try to turn on the sound. To do this, click as shown in the figure. Compared to a drawing, you need to choose from several lines. Just click on them one by one, and then you need to repeat the steps of the sixth stage.
Eighth stage - control call
Basically, we did everything we could. All that remains is to click on “Make a follow-up call on Skype.” This way you can know for sure whether the microphone is configured.
What will happen?
A window will pop up. Next, you need to follow the instructions from the answering machine. There is no need to pay for this check, and it can be repeated any number of times. Still no sound? Most likely the sound is not working. Try step six and check the speakers again. If, despite everything, it is quiet, we return to the fourth stage and adjust the volume again. No response means the microphone, unfortunately, is faulty.