We connect Bluetooth headphones to the Samsung TV. How to connect wireless Bluetooth headphones to an HDTV

Wireless headphones are a good solution for a person who decides to watch TV without disturbing others at all. To use this technique correctly, it must be configured correctly. Let's figure out how to connect wireless headphones to a TV.

Connect wireless headphones to the TV. Step by step instructions

We take the transmitter and turn it on. If it has batteries, be sure to insert them into the appropriate sockets. Some models have a power supply that can be connected to the mains.

The next step is to connect the transmitter to the television connector. This is usually a standard RCA connector, but some TV models have other interfaces. If your TV has a different one, make sure to purchase a suitable adapter in advance. TVs often have special connectors on the front panel for connecting headphones.

If your transmitter is activated by pressing a button, then turn it on. Modern devices are equipped with an indicator indicating normal operation.

Communication between the transmitter and the headphones should occur automatically, since they are initially configured to operate on the same frequency. If for some reason the sound does not appear, you should try pressing the button on the device designed to reset the settings and search for the required gadget again.

Adjust the sound to suit you. Consider the quality of the transmission - it depends on how far you are from the TV, the technical characteristics of the transmitter and the presence of obstacles between you. The standard maximum is 10 meters; if the distance from you to the TV exceeds this distance, the signal will begin to be interrupted.

Which headphones should I buy?

The advantages of such a device are the ability to move freely around the apartment and office. This is a very flexible solution that can be used not only with a TV, but also with a smartphone and various other gadgets. The sensitivity must be at least 100 dB, be sure to listen to the devices before purchasing, it is important to take into account the signal-to-noise ratio, the sound quality depends on it.

Headphones are an excellent solution for those who like to watch movies or music programs at night. To use this technology correctly, for example, together with a TV model from Korean manufacturers, users need to know how to connect wireless headphones to a Samsung TV. This can be done in two ways: it depends on the presence or absence of Bluetooth support in your TV receiver.

Each person has a personal perception of sounds - some like loud music, while others do the opposite, so Bluetooth headphones for the TV are an excellent way out of this situation. For computer game lovers This is generally a godsend: even when his son has a separate TV in his room (find out how), he can use wireless headphones for the TV all the time, without interfering with the rest of the family members going about their business.

You can surf the World Wide Web and stay connected at the same time using your mobile phone connected to your headphones. , which can be connected via Bluetooth to a smartphone, TV or other device, is very wide - in specialized stores you will be offered any option: from budget to ultra-modern models. For example, SHC5100 from Philips- a budget option that is ideal for television broadcasting.

Wireless headphones Philips SHC 5100/10

The main condition is that the headset must fit perfectly on the head and not put pressure on the ears, while creating complete isolation from external sounds.

Connect to TV with Bluetooth function

All the latest Samsung Smart TVs have a built-in Bluetooth transmitter. If you have just such a model, then the connection algorithm will be elementary. And in general, it is distinguished by its intuitive simplicity.

If you need to return to listening to sound through the TV speakers, simply turn off the headphones.

It is worth noting that if you have Bluetooth headphones from a company other than Samsung, there may be a problem with pairing. The company's engineers specifically included wireless headphones with the Samsung logo in the list of paired devices so that users would buy similar products rather than competitors' products. Consider this factor when choosing wireless headphones for your TV.

Connection via Bluetooth transmitter

If your TV does not have built-in Bluetooth, you will have to purchase an additional device - a transmitter. The main parameter of a Bluetooth transmitter is number of simultaneously connected headphones. One wireless device can be connected to any transmitter, two can be connected to a more expensive product, but more - while modern technology is not able to do this.

Mpow Streambot- bluetooth for a modern TV that costs $25-30 will give one pair of headphones excellent sound. It has a built-in battery and can also receive signals from other devices via Bluetooth. All devices that transmit sound to , can be listened to without setup.

Bluetooth transmitter Mpow Streambot

If users wish to implement connecting two pairs of headphones, then the price of such devices immediately increases: for example, Avantree Priva will cost you $57, and Miccus Mini Jack is one dollar more expensive. These transmitters will help you connect your headphones to your LG or Samsung TV without any problems.

Avantree Priva Bluetooth transmitter

We offer a step-by-step algorithm for how to connect headphones to a TV using such a device.

We turn on the pre-purchased transmitter - it may have a separate power supply from the network or you will need to insert batteries.
You need to connect it to the RCA connector; if your TV has a different input, then you need to buy an adapter.
You can turn on the transmitter by pressing a special button, but many are activated immediately when connected to the network, as indicated by a special LED indicator.
Communication between the transmitting device and the headphones occurs automatically because they are tuned to the same frequency. If the sound does not appear, then press the reset button - the product will automatically find your gadget and connect to it.

Many users are interested in whether it is possible adjust sound, and at what distance from the TV should I do this? Each specific product has sound adjustments; the distance from the source should be no more than 10 meters, then the signal may be interrupted, but for modern apartments this distance is more than enough.

By connecting wireless headphones, you can turn on the TV at full volume without disturbing others. But to do this, you need to familiarize yourself with the simple rules for connecting them so that everything works properly.

Why do you need headphones for TV?

Why do you need wireless headphones for TV? Everyone may have different reasons. This may be due to hearing impairment, when a loud device disturbs the family. They are connected by fans to get the required volume level. Also, accessories will be indispensable for watching TV or playing games at night.

But why not buy regular headphones, why choose wireless ones? Their advantage lies in their versatility. Once you purchase this accessory, you can use it with other devices. It's much more comfortable than classic headphones. Moreover, the Bluetooth range is quite rich, so there are sure to be accessories that suit all parameters.

What is needed?

You can often find a TV with wireless headphones, but if they are not there, then you need to select them separately. It is necessary to understand what sound input channels the equipment has. If the device is used without acoustics, then you need to inspect the ports. This must also be done if the TV is connected to a speaker system.

There is a standard set of audio outputs:

composite: two L/R connectors;
3.5 mm jack or Audio;
optical input Optical.

Many widescreen devices have an optical port. Composite output and jack are also often found in technology. If there is no analog output, you will need to purchase a digital-to-analog converter that is installed to the optical output.

Selecting a Bluetooth transmitter

To connect wireless headphones to your TV, you need to purchase a Bluetooth transmitter. Its important characteristic is the number of installed headphones. In some you can connect only one, while in others two or more.

If you only need to connect headphones, you can purchase Mpow Streambot. The device has high sound quality, it has a built-in battery, and also has both signal transmission and reception. That is why you can configure reception from other devices.

When you need to connect several headphones, the choice here will not be as large, and the cost will be higher. Devices such as Avantree Priva and Miccus Mini Jack TX4 are great options. There are no differences between the devices when it comes to installation.

Choosing headphones

Wireless headphones for TV come in different varieties. You can buy a cheap option or an expensive one. The main thing is that the device includes the necessary functions.

A good option is Beyution Stereo Bluetooth Headphones. These headphones are very light and reliable. They keep the battery charged for a long time. To watch your favorite shows, this device is ideal.

Correct setting

How to connect wireless headphones to TV? This job is not difficult. A Bluetooth transmitter is connected to the required output. If there is an optical port, then you need to use a digital-to-analog converter: it is attached to the TV, and the transmitter is attached to it.

Then you need to connect the headphones to the transmitter. Within a few seconds, the devices are connected, and you can watch your favorite programs. In some cases, wireless headphones for TV are connected directly.

When there is no sound, you first need to check the connection with the Bluetooth transmitter. It is necessary to turn off the transmitter input, and then send sound to it from an external device, for example, from a laptop. If sound comes from them, but the TV does not, then HDTV or audio system settings are needed. It is important to find items that are connected to headphones or external speakers. Some TVs will not have sound until the desired feature is installed. It turns out that once you buy headphones, you can use them for other devices. Music and transmission of the desired volume will always be available.

Benefits of headphones

The advantages of headphones are the ability to easily move around the room. This is a very convenient solution, since they can be connected to a smartphone, tablet, or laptop. It is advisable to choose devices with a sensitivity of 100 dB or more. Listening to music before purchasing will help you check this. It is imperative to check the signal and noise, because this affects the sound quality.

Many devices come with instructions showing how to connect correctly. Wireless headphones will be an excellent purchase for a comfortable pastime, because many wires will not get in the way.

Sennheiser RS 120 II

These wireless headphones are suitable for Samsung TV and many other models. They have the function of audio signal via frequency modulation radio channel. The system includes an FM transmitter and receiver. Connection occurs via analog inputs.

Headphones are popular due to their optimal price-quality ratio. Due to the use of FM, the coverage is 100 meters, so the signal can even pass through walls. The volume can be adjusted on the side walls of the devices. There is also a wall mount.

Bose AE2W

The device operates on Bluetooth. These are wireless headphones for Samsung, but are also suitable for other devices. If this convenient technology is not available, then an adapter is used.

Bose has excellent sound quality, which sets it apart from many other similar devices. The advantage is that it pairs with 2 devices, so you can pause the movie to make a phone call. It is also possible to switch from watching a program to listening to music on your smartphone.

Sennheiser RS 170

These wireless headphones for LG TV are also suitable for many other models of equipment. They feature Kleer technology, which improves clarity and reduces interference from other devices. The transmitter works instead of a stand for charging headphones. It is used for several headphones.

The device operates with a range of 80 meters. It has excellent sound insulation properties, so extraneous sounds will not be heard. Due to the presence of several modes, you can set them according to their intended purpose, for example, for music, cinema.

Sennheiser RS 180

The device operates based on Kleer technology. Its noise insulation is not as good as that of the previous type, but the sound picture is much wider.

Headphones are suitable for watching movies at home. They can be easily connected to other equipment. With them there will be no inconvenience for people around.

Sennheiser SET 840 TV

The devices will be an excellent replacement for full-size wireless headphones. The design is presented in the form of a “stethoscope”. The accessory does not put pressure on the head, so it is an indispensable option for people who wear glasses.

Stereo headphones have a volume control as well as a balance control. There is a function that improves speech intelligibility. Connection occurs thanks to a 3.5 mm jack. All specifications can be found in the instructions.

Wireless headphones are a convenient thing for watching TV. They are perfect for those people who live in large families, since they will not disturb strangers. It is enough to learn how to connect them correctly, and then various TV programs are available at any time.

1. There is a complete immersion in the music: you are not distracted by outside noise. And the quality of playback in headphones is often higher than in music speakers. Of course, this applies to home equipment - serious acoustics simply do not fit into the conditions of the room.

2. You do not disturb others. Perhaps someone is relaxing in the room, or wants to watch a second TV. Headphones help to separate comfort zones and prevent conflicts with others.

Connecting headphones to the TV in the standard way.

Recommendations: 10 Best Wireless Headphones
, How to set up headphones for high-quality sound reproduction
, Headphone pinout

If your TV does not have a standard headphone jack

If the headphone cord is short

No comments required. In any case, a long cord is a certain inconvenience. It can be caught by household members or pets. And lying on the sofa with wires is not very comfortable.

The ideal solution is wireless headphones

Additionally, this solves the problem of a TV without a headphone jack.

Which headphones are suitable for your TV?

There are Smart TV models that have a Bluetooth module installed. True, its presence does not guarantee compatibility with wireless headphones. You need to look at the technical specifications and make sure that the “sound output to Bluetooth device” function is present. Turn on this mode and power the headphones. The TV receiver finds a new device - and you receive sound over the air line.

If there is no function, you will have to look for headphones with a transmitting module. It looks like a regular USB flash drive.

It’s clear that your TV receiver must support such devices (again, look at the instructions). The transmitter can use Bluetooth, Wi-Fi, or infrared technology. In the TV menu, turn on the “sound output to USB” mode, and your household will enjoy silence.

Attention: Not all TV models can transmit sound via USB. Even if you can connect a wireless mouse or keyboard to it, this is not a guarantee of compatibility with headphones.

If none of the methods considered is suitable, the only option left is to upgrade the TV. It is necessary to open the case and solder a tap for the connector (which you will mount into the case panel) to the input of the low-frequency amplifier. But this is a job for an experienced electronics engineer, and besides, this entails the loss of warranty.

Thematic materials: 11 Best Bluetooth Headsets for Your Phone
5 Best Wireless Hi-Fi Headphones
7 Best Headphones for Kids
How to charge wireless headphones
How to connect wireless headphones to your phone
, How to use wireless Bluetooth headphones
How to improve sound quality in headphones
, No sound in headphones
, Headphone wiring

Many music lovers use headphones to listen to music. The same goes for TV sound. There are two reasons for this:
1. There is a complete immersion in the music: you are not distracted by outside noise. And the quality of playback in headphones is often higher than in music speakers. Of course, this applies to home equipment - serious acoustics simply do not fit into the conditions of the room.
2. You do not disturb others. Perhaps someone is relaxing in the room, or wants to watch a second TV. Headphones help to separate comfort zones and prevent conflicts with others.
pic 1
It would seem that the problem does not require discussion - buy headphones, connect to the TV, and enjoy a private immersion in the world of sounds. However, there are several problems:
Not all television receivers have the appropriate connector for connection.
Most headphones are equipped with a connecting cable no longer than 1.5 meters. And sitting at such a distance (being “tied” by a wire to the TV) is uncomfortable and harmful.
We resolve issues as they arise:
1.Connect headphones to the TV in the standard way.
Inspect the back wall (some models have the connection option on the front panel) of your television receiver, or better yet, read the instruction manual. If there is a regular connection, we will deal with the technical side of the issue.
The standard for connecting headphones is the so-called “jack”, that is, a pin connector with a diameter of 3.5 mm.

The connector consists of 3 cylindrical information contacts: “ground”, “left channel”, “right channel”.

For information:
If you do not have ordinary headphones, but a headset with a microphone, there are two options for organizing the connectors.
Separate plugs for microphone and headphones. In this case, you connect to the TV with only one connector.

There are headsets with an extended plug, 4 contacts. It is better not to use this connector for connecting to a TV. In theory, the microphone service pin is not used, but it can be shorted to ground. Equipment may fail.

This doesn't mean you need to buy a new set of headphones. There are standard adapter-splitters.

With their help, the information channel for the headphones is highlighted, and you use a separate plug.

Let's return to the connectors on the TV. They are usually marked with a headphone icon, or the abbreviation H/P OUT:

You need to look at the labeling carefully. Connectors of this standard (3.5 mm jack) are used for various purposes. If you see designations like: “AUDIO IN RGB/DVI” or “COMPONENT IN”, do not connect headphones to them under any circumstances.

Next is the software part of the question. The headphone jack standard automatically disconnects the signal going to the TV speakers. That is, you connect headphones, and the loud sound from the TV disappears.
Attention: Before disconnecting the headphones, do not forget to mute the sound. Usually when listening on headphones, you raise the volume level.
There are TV receiver models that do not have this function. After connecting the connector, nothing happens. You need to enter the TV settings menu and switch in the “sound output” section.
2. If the TV does not have a standard headphone jack
Unfortunately, many modern models do not provide the ability to connect headphones. There is a simple solution:
As a rule, any television receiver has audio outputs for connecting external acoustics. They are made in the form of RCA connectors (the so-called “tulips”).

This is nothing more than a line output. It is not equipped with a powerful amplifier, but for confident listening to audio information in headphones, it will be enough. An adapter is used to connect to a 3.5 jack connector.

If the audio output is designed to connect 5:1 format acoustics, there will be 5 or 6 tulip-type connectors on the TV panel. In this case, the adapter is connected to the “FRONT L/R” connectors.
To turn off the signal output to the TV receiver speakers, you need to switch in the “sound output” menu.
Another “spare” option is the universal SCART connector
Present in almost every TV model.

This block contains both audio inputs and outputs. Low level: no power amplifier. As is the case with RCA connectors for external acoustics, audibility in headphones is sufficient. When connecting to a SCART connector, you also need to switch the sound in the TV menu.
Since there are no adapters from SCART to “jack”, such a block is installed, which has two modes: “IN” and “OUT”.

Switch to “OUT” mode and connect headphones via an RCA to jack adapter.
If the headphone cord is short:
Of course, you can buy second headphones with a 4 or 6 meter cable. But there is a more economical way: purchase an extension cord.

A TV is one of those devices that, as a rule, requires the highest quality speaker system. For a good TV, you should definitely choose a powerful multi-channel system, preferably digital, that can provide the user with truly surround sound. After all, the pleasure that can be obtained from watching modern films, rich in various special effects, including sound, depends not least on this. And if the TV has a large diagonal and is capable of playing 3D films in high definition, high-quality acoustics are simply necessary - films in Blu-ray quality are extremely rarely supplied with audio tracks with two channels, because without a system with a central speaker, speech in such films will be extremely difficult to hear heroes.

However, installing a good sound system is not the solution in all cases. Many, of course, try to provide conditions for installing a set of speakers - some even make special renovations in the living room for this purpose, organizing wall niches for multi-way speakers. But sometimes, due to lack of space, it is impossible to install all the speakers. Or the possibilities of their use are limited, for example, not everyone can use speakers at night, but the desire to watch TV can come at any time of the day. What to do in this case?

Fortunately, modern television equipment manufacturers have provided for all operating situations. Most TVs produced today can easily be connected to high-quality headphones, which, of course, will not provide the same sound quality as a full-fledged speaker system, but can be used in certain situations. An inexperienced user may have only one problem - correctly connecting the headphones to the TV. How to do this?

Variety of connectors

A TV is a more complex device in terms of connectors than a computer. If on the latter's sound card you can usually find only one connector designed for audio output, plus one or two image outputs, then on the side or back panel of a modern TV there is a whole scattering of connectors in which an inexperienced user can easily get confused.

So, let's look at a typical TV panel and figure out why certain outputs and inputs are needed, and where we can plug in headphones. As standard, the TV is equipped with the following connectors.

Let's start with those connectors that in this situation you should recognize at first glance and immediately discard. These are connectors for connecting a video signal. They are used to connect various players to the TV - DVD or Blu-ray, game consoles, as well as to connect the TV to the video card of a personal computer so that you can use the TV screen as a computer monitor. There are three types of video inputs, they differ in signal quality:

Analog RCA input, known as a tulip. It consists of three connectors, only one of them is needed for video - yellow, and the other two are needed for sound, and here they can be useful to us. But more on that later.
Composite input – splits video into three separate signals.
HDMI is the best option known. Simultaneously transmits video and audio.

To determine how to connect headphones, we find these three connectors and do not look at them. We'll need one of the audio inputs, with some caveats. Sound can be output or input to the TV in several ways:

The simplest one is a mini-jack with a diameter of 3.5 mm. As a rule, it is denoted in a very simple way - with the simple word Audio. Headphones are connected directly to this input.
The aforementioned RCA. We do not pay attention to the yellow connector, since we are only interested in the red and white outputs. They are also available in the section dedicated to composite - these connectors can also be used. Two multi-colored connectors are needed for separate output of left and right front signals. You won't be able to connect headphones directly - you'll have to use an RCA to mini-jack adapter. It costs about 100-150 rubles.
HDMI and SCART output not an analog, but a digital signal, for which headphones are not suitable. If there are no other options (which is extremely unlikely), you will have to use one of these connectors. You will have to connect either through a receiver or through a transformer.

So, we figured out the connectors. If none of the simple and obvious connection methods are available, you will have to further understand the options for converting the acoustic signal.

Options for connecting headphones to TV

From the fact that you can find a huge variety of different connectors on TVs, it is easy to conclude that you can connect headphones to this device in several ways. Headphones can be wired or wireless - the latter, of course, are optimal, since watching TV from a distance of about a meter is not the greatest pleasure. And the cable for wired headphones rarely exceeds this length. In any case, the connection is made in one of the following ways:

The easiest way is to connect headphones to the jack marked with the word Audio. This is a regular outlet with a diameter of 3.5 mm. The plug on standard headphones, even the most powerful and high-quality ones, is designed specifically for connection to such a connector. The connection is thus made by simply connecting the plug at the end of the headphone cable and the corresponding hole on the TV body. It would be good if this connector is located on the side panel. If all the outputs are located on the back wall of the TV case, some problems may arise, mainly associated with the inconvenience of using the device.
If there is no minijack on the TV body, you will have to use RCA connectors. But how do you connect a 3.5 mm plug to two analog outputs at once? For this, a simple adapter is used, which in some cases may even come with expensive headphones. This adapter has RCA plugs on one end and a standard headphone input on the other. Assembling the system is very simple - we plug the adapter into the TV, and the headphones into the adapter. You can use any RCA outputs - there can be several of them, up to three pairs.
If you don't have any of the analog jacks, you'll have to use a device that converts the digital signal coming from your TV into an analog signal that your headphones can pick up and convert into sound. The simplest and most common option is to use an AV receiver. The TV is connected to the receiver in any of the available ways - it is best, of course, to use the HDMI connector, since it provides the purest and highest quality signal. And the headphones are already connected to the receiver.

The methods differ in the complexity of implementation and in the total cost of the equipment. Therefore, it is best to think everything through in advance, and if you plan to use headphones frequently, immediately choose a TV equipped with a 3.5 mm output. This way you can avoid the lion's share of acoustic problems.

Connecting wireless headphones

Wireless devices have many advantages over their wired counterparts: not only ease of use, greater range, but also the ability to easily switch between sound sources. You don’t even have to get up from the couch to do this – you can switch headphones from TV to phone in just a couple of seconds.

To connect headphones to the TV, you will need the same mini-jack, which can be obtained using any of the methods described above - find it on the TV body, use an adapter or receiver. A Bluetooth signal transmitter is connected to this connector. It will receive an analog acoustic signal from the TV via cable and transmit it over the air to the headphones. The reception range varies depending on the quality of the headphones - but, as a rule, it is no less than a few meters. Good headphones allow you to receive a signal even from another room.

After connecting the transmitter, all that remains is to find the power button on the headphone body and start the headphones. The sound should appear immediately if the device's battery is charged or fresh batteries are used.

Possible problems

If, after connecting the headphones correctly, sound does not appear in them, it is worth checking some points. First of all, this is, of course, the sound volume. Some TVs separate the signal sent to the built-in speakers and to the headphones or additional speakers. So, the sound on the speakers can be at normal volume, but on the headphones it can be turned up to zero. This function is useful if there is a need to simultaneously provide sound to different devices.

Another possible problem is incorrect TV settings. The settings menu can be accessed using the remote control. In the menu we find the “Sound” item and manually turn on the sound to the auxiliary speakers (these are our headphones).

If there is no sound in your wireless headphones, you should check whether they are connected to another sound source - a phone or laptop. How to do this - see the instructions for the headphones, since the method for each model may be different.

Thus, connecting headphones to the TV is very simple if you understand all the available connectors. To learn more about the capabilities of your equipment, you should carefully read the user manual that came with your TV.