Connect without network access. Network without Internet access and ways to solve the problem. Network cable not connected

If devices connect to the Wi-Fi network, but the Internet does not work, you need to determine the reason. The problem may be in the Internet connection itself, in the router or laptop (or other connected gadget).

First you should check if the Internet is working at all. To do this, the network cable is connected directly to the computer. If the Internet connection does not appear, you should contact your provider. Otherwise, check the settings of the router and devices connected to the wireless network.

To understand that the problem is not in a specific laptop or other connected gadget of the user, you need to connect other devices to the router, such as a phone, tablet, etc. If other devices also find Wi-Fi, but after connecting the network without access to the Internet (this is indicated on a laptop), sites do not load, then the problem lies in incorrect router settings. If the connection is successful on other gadgets and the sites load, then the problem is in the connection of a specific device.

How to solve a problem with a laptop, smartphone, tablet.

If only one device says “Unidentified network, without Internet access,” you need to double-check the wireless connection settings to the network. When setting up the router, the user could accidentally change the connection data. You can check the correct settings on your laptop or computer as follows:

1. You need to connect to a Wi-Fi network.

2. Go to the Network and Sharing Center.

3. In the open window, in the panel on the right, click “Change adapter settings.”

4. In the open window, right-click “Wireless Network Connection” and select “Properties”.

5. In a new window, select “Internet Protocol version 4 (TCP/IPv4)” from the list and click “Properties”.

6. In a new window, see if the “Obtain an IP address automatically” and “Obtain DNS servers automatically” items are selected. If necessary, mark them and click OK.

7. Reboot the OS. After rebooting, the Internet connection should appear. If the network, as before, does not have access to the Internet, the connection may be blocked by antivirus programs or firewalls. Then you should turn them off.

How to solve a problem with a router.

Before setting up your router, you must first return to factory settings. To do this, press the button on the back panel of the router and hold it for 10 seconds. After this you need to go to the admin panel. To do this, enter the following address in any Internet browser: http:// or http:// (TP-link, Dlink). In the window that appears, enter your username and password to log in, usually admin and admin. To fix the router, you will need the WAN tab. Here you set up an Internet connection that connects to the router. SND providers use Dynamic IP, Static IP, L2TP, PPPoE, PPTP connections.

For example, Kyivstar uses Dynamic IP; the corresponding settings are set in the WAN section of this provider. If the provider uses a different connection, for example, Static IP, then the setting with Dynamic IP will not work; the router will not connect to the Internet in this case. To set the correct settings, you need to find out exactly what connection technology the provider uses. This information can be checked with the provider itself or viewed on the Internet.

Sometimes providers create a binding to the MAC address, which can also affect the operation of the router. In this case, you need to connect the router via cable to a computer whose MAC address is registered with the provider, find the MAC Clone tab, click Clone MAC Address, and then Save.Update.

There are also situations of the following nature. The user decided to change the Windows 8 OS to the Windows 7 OS. Before the reinstallation, everything worked fine, but then problems began with connecting to the wireless network, the message “Unidentified network” appeared, that is, the Internet stopped working. To solve this problem, you need to go to the Network and Sharing Center, select Manage wireless networks.

Right-click on the network that you cannot connect to and select Properties. In the Security tab, click on the Advanced settings section. In the menu, check the Enable Federal Information Processing Standard (FIPS) compatibility mode for this network. This update should help resolve the connection issue.

⭐️⭐️⭐️⭐️⭐️ Now I will tell you what to do when there is no Internet via WiFi on your Android phone. Those. The connection to the network itself is there, the Wi-Fi icon is active, but it is not possible to access the Internet and instant messengers (Telegram, Viber, Skype) and other applications (Instagram, VKontakte, etc.) do not connect.

This article is suitable for all brands that produce phones on Android 10/9/8/7: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question to a specialist at the end of the article.

I'll notice! If you use a public WiFi network or a private corporate one, then there is a high probability that they will block some social networks and instant messengers. This is often practiced and you will have to come to terms with the situation.

In most cases, rebooting the smartphone or router that distributes the wireless network helps. Another reason could be a software error in the phone’s operation or incorrect router settings.

No internet due to a glitch in Android itself on the phone

Reboot your phone. If the problem was caused by a minor system glitch, restarting the system will fix it.

After restarting if the error persists, you will need to “Forget the network” and then reconnect to it.

Forgetting the network and reconnecting helps resolve the mismatch between the Wi-Fi settings on your phone and router.

If deleting the network does not help, check the proxy server status on your phone. It should be turned off:

1. Go to the “Wi-Fi” section of the settings and select the network to connect to.
2. Check the "Advanced" option.
3. Make sure the Proxy Server field is set to No.

Another reason that the phone does not connect to the Internet may be an incorrect date. To check and change it:

1. Open settings.
2. Select the "Date and Time" section.
3. Set the time and date manually or check the “Network date and time” and “Network time zone” checkboxes.

After setting the correct date, connect to Wi-Fi. If the wireless network actually works, you will be able to access the Internet.

Checking Internet access

Before using your smartphone or router, make sure that everything is ok with the Internet. What could be wrong with it:

• You didn't pay, so your provider suspended your Internet access. Make sure there is network access through the wire.
• The router settings include restrictions on visiting certain sites or a traffic limit (common practice for open networks in public places).
• There were problems on the provider's side.

After eliminating these factors, proceed to diagnostics, allowing you to understand in the operation of which device the cause of the problem is hidden.

The easiest way is to connect to the wireless network from another phone/tablet/laptop. If another device connects to the network, then the problem is in the phone, which cannot establish a correct connection.

Checking and setting up the router

If, as a result of some kind of diagnostics, you find out that they occur on all devices that connect to the same wireless network, then look for the cause of the error in the router settings.

First of all, reboot your router. Unplug it for 10-20 seconds, then turn it on. Make sure that the device is close enough to the wireless network source so that nothing interferes with the signal.

Look at the settings and try changing them a little:

When connecting to an open public network, check that you have completed web authentication. Usually, when you try to connect to Wi-Fi in a shopping center, a browser launches with a page for entering a phone number. If you don't do this, you will be connected to Wi-Fi without access to the Internet.

If you are having problems connecting to the Internet in Windows 10, you need to determine what kind of problem you are experiencing. Most often, network access is terminated when problems arise on the part of the provider.

To make sure of this, call technical support and ask to test the connection. If everything is fine on the Internet provider’s side, you need to look for a problem on your computer or Wi-Fi connection settings.

Yellow exclamation mark for Wi-Fi and the inscription “protected”.

• Launch the command line (press the “Win” and “R” keys simultaneously, and then enter the “cmd” command in the window that appears).

• A black window will open, where you need to enter “netsh int ip reset resetlog.txt”, and then press “Enter”.

• Now restart your PC and then test the connection.

Windows also writes a message about the lack of access to the World Wide Web if the wired or Wi-Fi router has incorrect settings. There is a similar problem when the laptop connects to the Internet directly via a cable. If you have suspicions about this, then there is nothing left to do except call a specialist to set up your computer (but, most likely, you will have to set up a Wi-Fi router).

The difficulty of describing this problem in one article is that the provider may provide network access using one of several communication technologies - for example, ADSL or VPN. To connect a laptop or computer to the Internet, you need to obtain settings data from your provider, which, in most cases, is individual for each user and case. But describing them all is labor-intensive, so in such situations it is better to turn to specialists.

Quite often, when connecting to the Internet, you can see the message “unidentified network without Internet access.”

Obviously, it indicates that connecting to the World Wide Web is currently impossible.

Moreover, such a message can be seen both when connecting directly, via cable, and when connecting via wifi. Its appearance does not depend on whether a laptop or a full-fledged PC is used.

Moreover, it can also occur when connecting via a phone or tablet. Therefore, it would be useful to understand why this error occurs and what can be done about it.

We will divide all the many tips into two categories - when the system writes such a message when connecting directly and when connecting via wifi.

Solution. When connected directly

In this case, the error will look like this.

In general, if you use a direct connection, then the most common cause of this problem is problems on the ISP side.

It's very easy to check - if you didn't change any settings, and some time ago everything worked fine, then this is the reason.

You can also check this by connecting the cable to another device or through a router - if the problem persists, this is not the cause.

But if this is the case, there is only one way to solve it and it is to call your provider and have a specialist come to your home.

Incorrect IPv4 settings

Another very common cause of this problem on Windows systems is a failure of the IPv4 protocol settings. To fix this problem, you need to do the following:

• Go to the “Network and Sharing Center”. This is done very simply - you need to right-click on the network connection icon in the quick launch panel. After that, select the desired item.
  It all looks as shown in the figure.

• Select “Change adapter settings” on the left side of the window that opens.

• Right-click on your connection and select “Properties”.

Note: It is quite possible that in your case the network will be called differently. You need to look at what it is called when you try to connect, that is, in the window shown in the figure. The same connection must be selected in the menu shown in the figure.

• The window shown in Figure A opens. There you need to select “Internet Protocol Version 4 (TCP/IPv4)” (it’s highlighted in red) and click the “Properties” button (highlighted in green). After this, a window similar to that shown in Figure B will open.
  You need to make sure that the automatic data acquisition items (they are highlighted in yellow frames) are checked. In most cases this should be the case. But at this stage it would be useful to take your contract with the provider in hand.
  It is quite possible that the provider requires that there be some special data there. In this case, you need to check the boxes highlighted in blue and enter the data from the contract in the fields with the same color. After all the manipulations, click the “OK” button.

If nothing connects now, you can try restarting the computer. Doesn't help? Let's move on!

Problems with TCP/IP

Also, the cause of the error described above may be failures in the TCP/IP protocol settings.

The most effective way to eliminate this option is to simply reset all of these settings.

This is done as follows:

• Launch the command line as administrator. The easiest way to do this is using the following sequence of actions:
• Open the “Start” menu (highlighted in red in the figure);
• Click “All Programs”, find the “Standard” folder there (shown with an orange frame);
• On the “Command Prompt” item (highlighted in green), right-click;
• Select “Run as administrator” (highlighted in blue).

• We write the following there: “netsh int ip reset resetlog.txt” as shown in the figure. Press Enter and restart the computer.

Clue: the above inscription can be copied directly from here using a key combinationCTRL+C, and in the command line you need to right-click on an empty space and click “Paste”.

If this method fails for some reason, you can download a special utility to reset TCP/IP settings at support.microsoft.com/kb/299357.

After downloading it, you just need to launch it, the program will do everything itself.

Problems with DHCP

To check this option, you should launch the command line in the same way as described above and write “ipconfig” there.

If “169.254.[any number].[any number]” is written next to the “Main gateway” (it’s underlined in the figure),” most likely the problem is with DHCP.

To fix this problem, do the following:

• We go to the device manager. To do this, in the “Start” menu, launch “Control Panel” (shown in blue in the figure). After that, in the search bar (highlighted in red) we write “Device Manager”.
  We launch the one next to which it says “Updating device drivers” (highlighted in green).

• In the manager, we find the item “Network adapters” (it is underlined in the figure), on ours (there may be additional ones - virtual ones, but virtual ones usually say “Virtual”), right-click and select “Properties” (highlighted in red).
  In the menu that opens, go to the “Advanced” tab, find the “Network Address” item in the list and in the “Value” field (highlighted in blue) write any 16-bit number with 12 characters. You can write one as shown in the figure. Click "OK".

• Open the command line as described above and write “ipconfig /release” there, press Enter, then “ipconfig /renew” and Enter again.

• Reboot the computer.

If all this does not help, there is only one thing left to do - call the operator and ask for help.

Important: For all the methods described above, the interface was usedWindows7, in other versions of the operating system the appearance of the windows may be slightly different, but the essence remains the same.

Solution. When connecting via a router

In this case, there may be many reasons, but checking whether the problem is really in the router is very simple.

To do this, the Internet cable with an RJ45 tip must be removed from the router and connected directly to the computer.

If the Internet appears this way, then the problem is really in the router. There may be something wrong with its settings.

To eliminate this option, your best bet is to simply reset all settings.

To do this, you need to find a special connector on the back of the device, which looks like the one shown in the figure.

On some routers, “Reset” is written next to it, then finding this connector will not be difficult.

You need to insert a needle, match or something like that into it, press the button located inside with this object, and hold it in this state for several seconds.

After this, you can try to connect again and reconfigure the router.

What else we can do is update the wifi adapter drivers. To do this, go to the device manager in the manner described above.

Only in the “Network adapters” section you need to select the one whose name will include the inscription “wifi”.

Right-click on it and select “Update drivers...”, then follow the instructions in the explorer.

Basically, that's all we can do in this case. If all this does not help, we call our provider again and seek a visit from a specialist.

The reasons for this error and ways to eliminate it are clearly shown in the video below.

Network without Internet access (unidentified network)

Unidentified network without Internet access - What to do?

Today we are all highly dependent on the Internet. And when it doesn’t work, panic immediately sets in, your heart sinks into your heels and life seems meaningless. It may be funny to you, but for some it really is.

The user is especially lost when the Internet is connected, but does not work. Today I will tell you why this happens and what to do if this happens to your network.

Why doesn't the Internet work?

If you are connected to the Internet, but it is not working, the first thing you need to do is find the cause of the problem. To do this, you need to restart all devices that are connected to the Internet. This means a router, a computer, etc. Most often, such a reboot completely solves all problems with the Internet, and it starts working properly. If, after rebooting the router and computer, you do not get the expected result, move on to the next “therapeutic” procedures.

Today, most people connect to the Internet using a Wi-Fi router. If you have the same, then you need to check whether the Internet access indicator on the router is on or not. For those users who use a TP-Link router, the Internet access signal is marked with a globe icon. On other routers, this signal is most often signed “Internet”.

If the indicator is off, you need to check your router settings. If everything is fine with them, then we call the technical support of our provider and ask why there is no Internet, perhaps just repairing the highway or network.

But, if the indicator is on, then there is a connection and the provider is not to blame. Check Internet access on other devices. It doesn’t matter what it will be - a phone, a tablet or another laptop. This way you can figure out which direction you should dig next to solve this problem. I’ll say right away that the case when a router is connected to the Internet, which is known to work well, but at the same time it does not distribute it to other devices, is considered a very rare case. The reason for this problem lies in the failure of the router. It's not difficult to fix this. You need to reset all settings to standard and reconfigure it again, remember that after the reset all settings will be lost and the Internet may not work until the router is configured correctly!

Cases often occur when only one device or computer cannot connect to the Internet using a router, but everyone else can easily access it. In this case, you need to look for the cause directly on this device.

If you are connected to the mobile Internet via a USB modem or WiFi module plugged into a USB port, try disconnecting it and reconnecting it. If this doesn't help, try using a different port to connect. Perhaps reinstalling the driver will help you solve this problem.

Checking your Internet connection in Windows

If the Internet is connected to your PC or laptop, but does not work, and you are absolutely sure that the reason for this is incorrect settings, then you need to perform a series of procedures that will quickly solve your problem.

You need to start reconfiguring by pinging any popular site. To do this, press the combination “Win ​​+ R”. This will bring up the “Run” window.

In the text input field, you need to enter the following “cmd” and click on “OK”. If you are not a fan of my site, you can write Google. After that, press enter and wait for the result. If everything is fine, the server will send you something like this:

If the response from the server contains the line “The connection check failed to find the nodepec-komp.com. Check the host name and try again,” then you need to type another command, for example “ping .8.8.8.8”. This is the IP address of the public DNS server from Google, which will always be available. If the computer has access to an external network, then the answer will be the same as in the picture above, but with different numbers after “answer from...”.

If a ping passes through an IP address, but does not open in the browser, then most often this indicates that there is an Internet connection, but the network does not work due to incorrect configuration of the network card, namely, the address is not registered in them or the address is entered incorrectly DNS servers. I'll tell you how to fix this a little later.

If you observe a different response from the server, then you need to check access to the router. We will also check using ping. You can find out the router's IP address on a sticker that is glued to the back of its case. Most often, the IP address of routers is “192.168.1.1” or “192.168.0.1”. The first address is registered on my router, so I received this answer:

If the router pings, but the Internet node does not, then most likely the reason lies again in the settings of the router or in the router itself.

But if the router is not available for server requests, then there is a reason to go into the settings of the network adapter on the computer. But, before doing this, disable your antivirus and firewall, if you have one. Sometimes it is these two “comrades” that cause problems with the Internet.

If after this the Internet does not work, although there is also a connection, press the key combination “Win ​​+ R” again, but now in the “open” field we write “ncpa.cpl.”.

If you have entered everything correctly, the Windows network connections window will open. In it you need to find your active connection and right-click on it, then select “properties”. In the window that opens, look for the line “IP version 4 (TCP/IPv4)” and double-click on it to open the protocol parameters .

Check “Obtain an IP address automatically” and “Obtain a DNS server address automatically”. Click OK and check the result in the browser.

If this does not help, then check the box “Use the following addresses.” You need to register the IP address from the subnet of your router. If it has IP 192.168.0.1, then set the computer to 192.168.0.2. If the router uses 192.168.1.1 , then on the PC it will be 192.168.1.2. Mask 255.255.255.0. You must specify the router address as the gateway. You can also specify the server from Google as the preferred DNS server.

In any case, watch my video on speeding up the Internet, if you apply all the settings, the Internet should work.

Increasing Internet speed to the maximum!

I hope that at least one of the methods will definitely help you regain access to the Internet. If none of the options for solving the problem helped you, then you will have to call a specialist who will determine the true cause and solve the problem. But I’m sure it won’t come to that and you’ll fix everything yourself.