Detailed instructions for setting up digital television. Connecting and setting up digital terrestrial television on Smart TV: from A to Z

With the advent of the era of digital terrestrial television, many subscribers of cable and satellite networks began to increasingly think about connecting free broadcasting. Indeed, according to the Federal Target Program on the development of a digital broadcasting network, more than twenty television channels in excellent quality absolutely free. Which includes mandatory federal television channels.

The question arises - how to connect digital terrestrial television at home?

There's nothing complicated about it. To receive digital terrestrial television you will need any standard subscriber equipment DVB-T2/MPEG-4 with mode support Multiple PLP and UHF antenna ( DMV) range. The antenna can be either collective (installed on the house, also called a common antenna) or individual, installed directly in your house or apartment. Depending on the distance to the transmitting center, you must select the desired antenna. They are divided into active (with an amplifier) and passive. When purchasing an antenna, you can first check the power of the transmitting equipment installed in your region and the distance to the transmitting center. Based on the data obtained, select an antenna.

Approximate coverage radius of transmitting stations:
10 W– about 3 km;
50 W– about 5 km;
100 W– about 15 km;
500 W– about 25 km;
1 kW– about 30-35 km;
2 kW– about 35-40 km;
5 kW– about 40 – 50 km.

Let's move directly to the reception equipment. Three main groups can be distinguished: televisions with a built-in DVB-T2 tuner, set-top boxes of the same standard, and digital computer DVB-T2 tuners. Their settings are similar, if not the same.

Check your TV's ability to receive a DVB-T2 signal

Video: how to set up DVB-T2 digital terrestrial television

It is best to connect a digital terrestrial set-top box according to the manufacturer's instructions; it is practically impossible to make a mistake there. You can also watch the official video from RTRS:

A few recommendations, also from RTRS:
connect the antenna cable plug and, if necessary, the digital set-top box to the TV;
enable automatic channel search - the TV will tune to the corresponding digital terrestrial channel; when tuning to a channel in manual mode, you must specify the channel frequency (for example, 35 TV channel, 685 MHz);
Most digital TVs (and set-top boxes) have a built-in signal level and quality indicator, which will allow you to optimally configure your antenna to receive a digital terrestrial signal (see the operating instructions for the TV).

On TVs with a built-in DVB-T2 tuner, all manipulations are carried out through the TV menu. There shouldn't be any difficulties there either.

We recommend updating the software of your subscriber equipment to the most current one. This can be done in specialized services, or yourself (if you are confident in your abilities). The software can usually be downloaded from the manufacturer's official websites.

Frequencies of DVB-T2 digital channels:

21st television channel— reception frequency 474 MHz;
22nd television channel— reception frequency 482 MHz;
23rd television channel— reception frequency 490 MHz;
24th television channel— reception frequency 498 MHz;
25th television channel— receiving frequency 506 MHz;
26th television channel— reception frequency 514 MHz;
27th television channel— reception frequency 522 MHz;
28th television channel— reception frequency 530 MHz;
29th television channel— reception frequency 538 MHz;
30th television channel— reception frequency 546 MHz;
31st television channel— reception frequency 554 MHz;
32nd television channel— reception frequency 562 MHz;
33rd television channel— reception frequency 570 MHz;
34th television channel— reception frequency 578 MHz;
35th television channel— reception frequency 586 MHz;
36th television channel— reception frequency 594 MHz;
37th television channel— reception frequency 602 MHz;
38th television channel— reception frequency 610 MHz;
39th television channel— receiving frequency 618 MHz;
40th television channel— reception frequency 626 MHz;
41st television channel— reception frequency 634 MHz;
42nd television channel— reception frequency 642 MHz;
43rd television channel— reception frequency 650 MHz;
44th television channel— receiving frequency 658 MHz;
45th television channel— receiving frequency 666 MHz;
46th television channel— reception frequency 674 MHz;
47th television channel— reception frequency 682 MHz;
48th television channel— reception frequency 690 MHz;
49th television channel— reception frequency 698 MHz;
50th television channel— reception frequency 706 MHz;
51st television channel— reception frequency 714 MHz;
52nd television channel— reception frequency 722 MHz;
53rd television channel— reception frequency 730 MHz;
54th television channel— reception frequency 738 MHz;
55th television channel— reception frequency 746 MHz;
56th television channel— receiving frequency 754 MHz;
57th television channel— reception frequency 762 MHz;
58th television channel— reception frequency 770 MHz;
59th television channel— reception frequency 778 MHz;
60th television channel— reception frequency 786 MHz;
61st television channel— reception frequency 794 MHz;
62nd television channel— reception frequency 802 MHz;
63rd television channel— reception frequency 810 MHz;
64th television channel— reception frequency 818 MHz;
65th television channel— reception frequency 826 MHz;
66th television channel— reception frequency 834 MHz;
67th television channel— reception frequency 842 MHz;
68th television channel— reception frequency 850 MHz;
69th television channel— reception frequency 858 MHz.

When choosing a digital television service provider, you need to lean towards those companies that provide a full package of services, including setup and service. Otherwise, you will need specialized knowledge on setting up digital television on a specific TV model; this may differ depending on the manufacturer.

General concepts about setting up digital television

Any setting is carried out through the menu of a specific TV. You can call this function using the “Menu” key on the remote control.

To configure digital television channels, call the “Start” menu, then go to “Settings”.
In the “Settings” menu, select “Search” or “Channel settings”. The system offers analogue and digital channel search methods, depending on the year of manufacture and model of the device being configured. Sometimes the TV supports several standards: DVB-T and DVB-C. In the first case - the “Antenna” mode, in the second - “Cable”.
To continue setting up, select the first option - “Antenna”. If an error is made at this stage, the setup will not be completed.
Select the channel tuning method: automatically or manually. The choice is individual, at the request of the user. During automatic tuning, the program itself searches for the required frequencies and assigns sequential numbers to them. These numbers can be changed if necessary.

Manual tuning of digital television channels

On the remote control press the “Menu” key.
Find the item “Manual setup” (may have a different name).
Specify search parameters.
We configure each frequency separately.
In the search parameters we specify the symbol rate 6750, modulation 128 and individual frequencies: 402, 410, 418, 426, 434, 442, 450 and 458.

Depending on the TV model, the digital television settings may differ from the above algorithm. To clarify the procedure, let's look at setting up TV on specific TV models.

Setting up digital television using the example of a Samsung TV

Call up the “Menu” by pressing the green button on the remote control.
Click on the “Channel” submenu, indicated in the list with an icon.
Go to the “Auto Configuration” item.
Select the signal source “Antenna”.
From the proposed options, click on “Digital”.
Confirm the changes by clicking on “OK”.
Click on the “Start” button.

Setting up a digital TV receiver

Having connected the digital TV set-top box, turn on the TV.
We log in by pressing the television remote control on AV-1/AV-2. We put the TV remote control aside, then all manipulations will be carried out using the remote control for the set-top box.
We select the menu language, screen resolution, and make other minor settings not related to channel search.
We search for channels using the methods described above.

The advent of digital television caused a kind of excitement, as content in digital quality became available to a wide range of users. Recently, this particular area of television has been developing very actively; a large number of offices have appeared that will provide services for connecting and setting up digital television for a fee. The good news is that you can set up digital television on your TV yourself.

So in this article we will look in detail at all aspects of setup, both in general and for TVs from specific manufacturers. It is worth noting that there are different types of digital television. All proposed schemes relate to cable “digital”.

General instructions

First, let's look at the general scheme for setting up digital television reception. In different TV models, the sequence of operations and the names of items may differ slightly. Don’t worry, next we will look at the configuration features for specific brands, all points will be illustrated.

1. Using the remote control, enter the menu of your TV. In the window that appears, select the “Options” item. In order to go directly to the configuration, you must select the “Auto Configuration” item. A window should appear on the screen asking you to select one of the signal sources: cable or antenna. Select the first option, and then click the “Start” button.

2. After the operations have been completed, a window should appear in which you must select “Digital” as the signal source and then press the “Start” button again.

3. We are at the final stage of setting up digital television. In the window that appears, we find the “Search Mode” item, several options will appear, we need the “Full” item. Click and fill in all fields with the data indicated below.

Frequency (kHz) - 314,000 (314 MHz).

Modulation - 256 QAM.

Transfer speed - 6875 kS/s.

Please note that some TV models support network search. This means that you do not need to manually specify the above parameters. Simply, after selecting the desired search mode, press the “Search” button. As you can see, setting up digital television on your TV is quite simple. For those who are confused, read on for the illustrated instructions.

It is logical to assume that different TV models from the manufacturer LG use their own firmware and their own menu. However, in general, the menu of all TVs has characteristic similarities. Find the “Menu” button on the remote control, press it and a window appears on the screen in which you need to select the “Options” item.

In the “Options” tab you will see several parameters available for change. In the “Country” item you must indicate either Germany or Finland.

After this, you need to go to the “Settings” menu, there select the “Auto search” item in which you specify “Cable” as the connection method.

After these manipulations, a window should open in which you need to select “Settings” and specify all the values as in the figure below.

If you followed all the instructions correctly, then after searching, the TV will detect all available channels, as well as radio stations.

Please note that LG TVs use an automatic channel update function, which resets the existing channel list at certain intervals and starts a new search. For convenience, it is advisable to disable this feature. To do this, you need to go to the “Digital cable settings” tab and turn off automatic updating. Thus, setting up digital television on LG TVs is quite simple. All it takes is a little care.

Setting up digital television on TVs Philips

So, find the “Menu” button on the remote control and use it to go to the menu of your TV. Next, you need to go to the “Configuration” section.

In the window that appears, click on the “Install” item, after which a secondary menu will appear on the TV screen, in which you need to select the “Channel setup” section. Another submenu will appear, in which we select the “Automatic” item. Settings.” If you have completed all the transitions correctly, a message should appear warning you about the upcoming update of the list of all channels. Click “Start”.

Go to the section"Country" and select either Finland or Germany from the list.

For connection method, select"Cable".

Before you start the channel search process, go to the “Settings” item and make the settings according to the images below.

Now you have managed to set up digital television on your Philips TV. You can start directly searching for channels; to do this, click “Start”.

Setting up digital television on TVs Samsung

On the remote control, press the “Menu” button. Your TV menu should appear on the screen. Go to the “Channel” section (shown as a satellite dish). Several tabs will appear on the right, select “Antenna” and select “Cable” as the connection type. Next, you need to go to the “Country” tab and specify the “Other” parameter. In this case, the TV should request a pin code. If you did not change it yourself, then enter 0000 (default value).

Go to the “Auto Configuration” tab and select “Cable” as the signal source.

Set all parameters as in the image below, then click “Search”.

After all operations, your TV will detect all available channels.

Setting up digital television on TVs Toshiba

Using the “Menu” button, go to the TV menu and select the Russian menu language.

Find the "DTV Manual Tuning" tab.

Manually enter all the parameters as in the image below.

After that, click “Ok”, the search for channels will begin.

Conclusions

We have discussed in detail the diagram of how to properly set up digital television on your TV. We supported all sequences with images for better perception. If you have any questions, use the feedback form on our website or ask a question in the comments.

Digital television in Russia is rapidly gaining momentum. The number of television viewers is growing every day. And at the same time, the question of how to set up digital television on your TV is becoming more and more urgent? In this article we will look at both general points on setting up digital TV, and the features of settings in popular TV models.

General setup

First, let's look at the general aspects of setting up digital cable television.

We go to the TV menu, select “Options”, and look for the “Auto Configuration” item there. A window will appear in front of you with a choice of signal source, select the one you need and click “Start”.
After this, a window should appear in which you must indicate that you need digital channels.
Next you need to select a search mode. Select “Full”. Fields will appear that must be filled in as follows: Frequency - 314,000 (314 MHz), modulation - 256 QAM, transmission speed - 6875 kS/s.

After the search is completed, save the found channels.

Now let's look at setting up digital TV in individual models.

Setting up digital television on LG TVs

Let's go to options. To begin, in the Country tab, select Finland or Germany
Next, go to the settings tab, select Auto search, select the connection method, select Cable.
A window should appear in which you need to select Settings and specify the following data there: Frequency (kHz): 314,000, Modulation: 256 QAM, Network ID: Auto
If everything is done correctly, after setup, all TV channels and radio stations provided by your digital television operator will become available to you.

We would like to draw your attention to the fact that LG TVs have the automatic channel update function enabled by default, due to which the configured channels are periodically reset and new ones are searched for. We recommend that you disable this feature. This can be done in the “Digital cable setup” menu tab.

Setting up digital television on Philips TVs

Press the menu button on the remote control and select the “Configuration” section in the window that opens.
Select the “installation” item, a submenu will appear, select “Channel settings” in it. In the next submenu, select “Automatic.” Installations.” If everything is done without errors, you will see a message that the channel list will be updated. Click “start.”
Select “reinstall channels”
In the “country” section, select Finland or Germany
Connection method: select “cable”
Go to settings and set the following settings: baud rate: 6.875, baud rate mode: 314.00
Click “Start”

TV users ask how to tune channels on their TV. It is important for them to learn how to do this on their own, especially since such knowledge will always come in handy. Setting up TV channels depends on the type of broadcast:

ethereal;
cable;
satellite.

Using a special set-top box, you can have digital channels for the first two types of broadcasting. Satellite TV broadcasts also have good picture quality, but for this they install a dish and a tuner.

On old TV, TV channels are adjusted using special knob buttons. For most models, they are located under the switches or near the antenna connector on the back of the panel. You should look for channel frequency regulators under special covers or in drawers.

Setting up a TV of older models is always done manually. Very often, when you turn it on again, there is a need for additional adjustments due to the lack of memory systems. If desired, digital channels can be obtained by connecting the DVA-T2 set-top box.

How to set up a new TV

To connect a new TV to a regular antenna, you must switch to your native language. To do this, connect the tuned receiver to the antenna cable, then long press “OK”, call up the menu, look for the “Country” item, the word LANGUAGE and select RUSSIAN. Now the entire menu will be in Russian.

Automatic channel tuning on TV

How to set up your TV automatically? Almost cable television, as well as analogue, are configured in the same way. It is performed after concluding a service agreement with the provider.

Turn on the receiver, the message “channels not configured” will appear on the monitor. Using the remote control, call up the “Menu”, move the cursor one by one to the lines “Channel settings”, “Automatic tuning” and indicate the type of broadcasting that needs to be configured. Now all that remains is to press ENTER/OK. The television receiver begins to tune in to the channels, scanning the entire frequency range. This takes a few minutes and depends on their number; after the TV ends, it will show all saved TV channels. If it doesn’t work, open and study the instructions that came with the device. It contains a detailed description of the setup for this TV.

When a TV operator adds new channels, the settings are made again; for this, the edit line is used. But even after restarting the automatic tuning, all previously recorded channels are saved, and new ones are simply added to free numbers.

If the old receiver needs to be configured in a new way, find the “Delete” entry in the menu program, confirm the action by pressing “OK” and restart the automatic setup.

Manual channel tuning

Manual tuning for television channels is definitely necessary, because the automatic one records some unsatisfactorily. For example, doubles often appear, the image is of poor quality, and there may be no sound. They are removed. But if the channel needs to be saved, you will have to do it manually. This is done like this:

in the menu look for “Channel tuning”, “Manual tuning” and press ENTER/OK;
select “Program” and assign numbers to the channels;
choose a color system: PAL or SECAM, sound: 2.0 (stereo), 5.1, etc.;
conduct a “Search” for the channel, if successful, click “Save”.

If necessary, these steps are repeated for each of the TV channels. They must be confirmed by pressing ENTER/OK.

Setting up satellite channels

How to set up satellite channels if the dish is installed. The cable connects the receiver and the TV, switching it to monitor mode. The remote control for the tuner marks the desired satellite. In the receiver menu, select its scanning. The easiest way is to entrust this to an automatic search, which immediately does everything on its own, without requiring you to enter the transponder settings manually. Before this, it is advisable to study the instructions that come with the device. It describes in detail how to set up digital channels on your new TV.

There are a lot of such channels, so you need to choose those digital channels that you like best and will watch at least sometimes. We must not forget that when the image deteriorates, the cause may be strong wind and rain, so sometimes the position of the dish is adjusted.

Setting up digital channels

High Definition Television (HDTV) is a modern standard for transmitting compressed video signals. This technology provides the highest picture quality. On all modern TVs with a DVB-C tuner, it is now possible to configure digital channels. But such a TV must also have HD viewing capabilities. This new technology is becoming increasingly accessible to a wide range of users. Various companies are appearing that offer setup of digital channels. But you can solve this problem yourself and for free.

Having general knowledge and the manufacturer's instructions, it is easy to set up any TV. First, mark the lines:

“Options”, “Automatic setup”, mark the source and press “Start”;
hover the cursor over “Digital” and press “Start”;
“Search mode” and “Full” option;
enter the following data into the fields: frequency (kHz) – 314,000 (314 MHz), modulation – 256 QAM, speed – 6875 kS/s.

Modern TVs are equipped with network search, you just need to turn it on and wait. All parameters will be entered automatically. To add new digital TV channels, rescanning is done. After that they appear in the list.

Setting up TV without an antenna

Having high-quality cable Internet, you can watch TV without an antenna. To do this, connect the cable to the TV set-top box. There is another plus: channels from the former CIS countries will become available with excellent quality. Now the vagaries of the weather will not affect the broadcast. There is another positive point: you can watch a missed movie later at any convenient time. can be found in the corresponding section of our website.

Setting up Smart TV makes it possible to watch TV programs directly from the Internet, but to do this you need to have a stable network with a speed of at least 20 Mbit/s.

Let's look at how to set up a Smart TV. You can connect it in the following ways: connect the router and computer with a cable or use the Wi-Fi service. To ensure simultaneous access to a computer and TV via a 3G modem, a TP-Link TL-MR3420 router is used; it is also suitable for a cable network. Modern Smart TVs are equipped with a special output for connecting to a loyal network; it is connected with a cable to the router. In this case, the router gives the TV an IP address and all other necessary settings. There is nothing else you need to do, the TV is ready to go.

Some TVs have built-in Wi-Fi or the ability to connect a Wi-Fi adapter, which can be purchased separately. Which adapter to choose is indicated in the TV instructions. One more condition: the router must also have Wi-Fi. This technical possibility does not require running a cable from the router to the TV.

When connecting via wi-fi, go to “Network connection”, select the desired network, and indicate the wi-fi access password. After this, the IP address for the TV device will be automatically assigned.

TV picture adjustment

Setting the TV image is done as follows: in the “Service Menu” find the “Image” line. The necessary parameters will appear: “Contrast”, “Brightness”, “Clarity” and “Color”. Use the cursor arrows to change them, selecting the ones most suitable for the eye.

Once having set up the TV on their own, each user will be able to apply this knowledge again; they cannot do without it, because very often new television channels appear on the network or the signal source changes. You have to wait for hours for a technician, when the whole TV setup takes a few minutes, and most importantly, you don’t have to miss your favorite show.