Rules for resetting HP printer settings. How to reset the printer: quickly reset the number of printed pages on the cartridge chip How to disable ink control on a canon printer
Users of HP printing devices often have to reset machine or ink counter errors. Typically, printers have disposable cartridges. But since buying new consumables requires considerable expense, many are trying to find a way to reuse the ink tank. To clear fault codes, the specific model must be taken into account.
What will we talk about:
How to restart the device?
If you need to reset your HP printer and return to the settings that were originally set, you should follow these simple steps:
- In the HP printer program, you need to find the “File” menu.
- Find the “Restart” option and click on it.
- When the corresponding window pops up, you will need to confirm the action, which will subsequently restart the device.
Fonts loaded into memory will be deleted due to a factory reset.
Method for resetting the ink counter
The manufacturer of printers (HP 2050, HP 4283, Deskjet 2130 and other models) usually installs disposable cartridges on printing devices. Thanks to the built-in chip, the ink level is monitored, so a container that does not have a sensor will not be able to work in such a device.
To avoid purchasing new supplies, you can reset the ink counter on your HP printer:
- The cartridge is removed from the device and placed on the working surface with the contacts facing up.
- Using a small piece of tape, seal the contact, which is located in the upper left corner.
- The container is installed in the device, after which you should click “Ok”, print and remove the cartridge again.
- The contact in the bottom row on the right side is sealed. After placing the container back into the device, you will need to print it. Next, the inkwell is removed.
- To reset the counter that monitors the ink level, you need to remove the tape that was glued first from the container and insert the cartridge into the printer.
- The inkwell is removed and the second tape is removed. Next, the contacts need to be carefully cleaned with alcohol. If you install the consumable in its place, the counter will be reset. The HP printer will indicate that the ink level reaches 100%.
The counter can also be reset as follows:
- Three contacts in the top row on the right side are sealed at the same time;
- the cartridge is installed in the device and printing is performed;
- After removing the tape, alcohol is used;
- The container is returned to its place, after which you can begin test printing.
Based on the fact that on some models it is possible to reset the HP printer counter, experts advise using high-quality ink to avoid unwanted damage to the device.
Methods for resetting errors
Modern models of HP Laserjet, Deskjet 2130, HP 4283 and others printers have a system installed whose task is to self-diagnosis the device. The device reports the occurrence of problems by displaying error codes on the display or by blinking LEDs.
Although HP printing devices are quite reliable, they can also fail. Therefore, it is worth knowing how to reset an HP printer error.
Among the existing errors, a malfunction with code 79 is often encountered. This is how the device signals a software failure. To reset, the following algorithm of actions is provided:
- the device is disconnected from the power supply, after which you must wait at least 30 seconds;
- After turning on the printer, you should wait until it initializes;
- If the errors persist, you may need to reset the print queue or have to reinstall the drivers.
Displayed errors are reset differently in different printer models. For example, when you need to reset your HP Laserjet printer to return it to factory settings, you must remember that all existing pages will be erased from the printer's memory.
If you have a Laserjet with a touch panel:
- press the “Settings” button;
- select “Maintenance”;
- Scrolling through the list, you should find the option “Restore default values”, after which the action is confirmed.
Resetting settings on other models
Resetting the HP 2050 printer settings is often required if you need to install a cartridge after refilling. For the device to do its job, you must:
- Disconnect the USB cable from the device, but do not remove the power cable.
- Press the “Cancel” and “Color Copy” buttons at the same time.
- Without releasing the keys, the power is turned off and on.
- The printer will attempt to turn on, but will not succeed.
- After releasing the buttons, you should start the device.
You can reset the HP Photosmart printer (model C5183) as follows:
- the power plug is removed;
- “Ok” and “Help” are pressed simultaneously, the plug is inserted back, but the buttons are held until the Photosmart printer turns off;
- By pressing the cross and down arrow key, the device must be turned on.
In some HP Photosmart devices, for example, C7283, ink errors are reset by resetting the settings. To do this, press “Help” and “Ok” and, after the power plug is inserted, hold until you return to the original parameters.
You can solve problems with HP printers by resetting the settings. The main thing is to take into account the model of the device and adhere to the correct algorithm of actions.
Many users are wondering how to disable ink level monitoring in printers and multifunction devices, because... messages about lack of toner are sometimes untrue and simply interfere with operation. This problem is especially common when using refilled or non-original (third-party) cartridges.
There are several options to solve this problem. As a rule, the use of one method or another depends on the printer model.
1. This can be done by resetting the chips built into the cartridges. They are precisely designed to determine the ink level and prevent refilling of the cartridge. But resetting the chip is quite difficult.
IN You will need to purchase a reprogrammer, that is, a device with which you can reset the cartridge chip, and this is an additional expense. In addition, the reset procedure requires certain skills, so do not try to learn how to program and reset cartridge chipsets on your own; it is best to ask someone who has already encountered this process to help you figure it out.
2. The second option when disconnecting comes down to the following: check for messages that appear indicating that the device is running low on ink. On the printer body, press and hold the Stop/Reset button with a triangle icon and a flashing indicator for 10 seconds. The ink level monitoring system will be disabled for the specific ink tank (the one for which you received an alert).
3. For some cartridges, there is another method: Open "Control Panel" via menu "Start", in category "Printers and other equipment" select icon "Printers and Faxes". Right-click on the name of your printer and select the item from the context menu "Printer Properties"(on some models« Properties » ). On the tab "Ports" remove the marker from the field "Allow two-way communication". Click on the button "Apply" and close the window.
4. This is a kind of modification of the method described above.Disable the feature "Ink level control" on the computer to which the printer is connected. To do this, go to "Control Panel", select option "Printers". Next, call the context menu on the printer icon, select the command "Printer Properties". Then go to the tab "Service", select option "Printer Status Information", click on the button "Options". Uncheck "Display warning automatically".
5. Also, for certain printer models, there are special utilities that allow you to reset the ink counter (for example, IPTool For Canon IP series or MPTool for Canon MP series). Program MPTool works with printers only when switching them to Service or N isolevel mode.
Service- a mode in which you can perform service operations using the printer buttons. To convert a Canon MP series printer to "Service" mode needed:
1) Turn off the printer.
2) Press and hold the print cancel/resume button.
3) Press and hold the printer power button.
4) Release the print cancel/resume button.
5) Press the Resume/Print button twice.
6) Release the printer power button.
After this, the green LED will blink for some time (the blinking time depends on the printer model), then it will light up constantly and the printer will go into "Service" mode.
Low-Level- operating mode intended for low-level operations with EEPROM printer, in this mode it works with the printerMPTool . To convert your MP-series printer to Low-Level mode needed:
1) Disconnect the printer from the network.
2) Press and hold the power button.
3) Connect the printer to the network.
4) Press the Cancel/Resume Print button.
5) Release the power button. (if the system reports that a “new device” has been detected, install the printer drivers, after installation is complete, name the new printer as "Canon MP XXX Low-Level Mode").
after that, the green and orange LEDs will blink and go out, then the orange LED will light up constantly and the printer will go into "Low-Level" mode. You can exit this mode only by disconnecting the printer from the network.
6. Some printer models have cartridges without a chip. Then, to reset the data, a mechanical method is used to seal certain contacts on the cartridge with tape (or varnish). The fact is that the printer remembers how the last 4 installed cartridges were used ID- identifier. Taping the contacts allows you to make the device believe that 4 different cartridges were installed in it one by one; it will “forget” the ID of your refilled cartridge and will perceive it as new.
Schemes for sealing contacts are individual for different printer models and for different cartridges, so it is hardly advisable to list all possible options here. Those interested can easily find them through any search engine.
P.S. To reduce the printer's ink consumption, set up the economy mode. To do this, open the properties window of your printer as described in the third step and go to the tab "General". Click on the button "Printing Settings" and in the additional window that opens, open the tab "Paper/Quality"(on some models"Home"). In a group "Print quality"select the desired value using the drop-down list or mark the field with a markerEco mode(on some models"Quick Print") to enable economy mode. Apply the new settings.
P.S.S. If you are going to refill a cartridge, you need to do this as soon as the ink runs out. Otherwise, the remaining toner will dry out in the nozzles and it will no longer be possible to revive such a cartridge.
Prepared based on materials from kakprosto.ru,prospekt-st.ru, fb.ru, mnogochernil.ru, vsbot.ru, allart-service.ru, domotvetov.ru, zapravka163.ru, resetters.ru
ATTENTION! This post is for informational purposes only. The author is not responsible for possible consequences and economic damage resulting from inept actions. By using the wrong method, the user risks damaging the printer, so remember that you perform all actions at your own peril and risk, as well as under your own responsibility!!! It is highly recommended not to perform the described manipulations with devices under warranty!!!
/ Refilling cartridges / How to disable the ink level control system on Canon printersSome Canon models (Pixma 3600, 4600, MP540, MP630 MFPs), classified as mid- and upper-price devices, are equipped with separate cartridges. Each inkwell is one color. A single print head is installed on the carriage.
This technology is more cost-effective because it is possible to control each color separately. The design of a single print head allows you to adjust the size of the droplet that is applied to the paper. Among the advantages, one cannot fail to mention the improvement in print quality and color mixing.
However, with all the listed advantages, the question remains of how to unlock the printer when there is still ink left and how to refill the Canon cartridge (each cartridge is equipped with a chip that acts as a counter for printed pages). As soon as the ink runs out, printing becomes impossible - the device stops until the cartridge is replaced.
PGI-520Bk, CLI-521 are the same non-refillable cartridges that replaced PGI-5Bk and CLI-8. Old-type cartridges did not cause any trouble with refilling, and until the end of the cartridge was replaced, you could manually turn off the page counter (so that the cartridge replacement error did not occur).
How to disable ink level monitoring
About how to refill a Canon cartridge, on which the meter is installed, you can find out from our specialists. Below we will tell you what to do if the printer is blocked due to supposedly running out of ink.
Ink level data is contained in chips and cannot be reset or reset. To prevent the device from being blocked if the ink runs out (according to the chip), it is necessary to disable the ink level monitoring system in the cartridges. To do this, you need to use the paper feed button - press and hold for about 10 seconds. The ink level control system will thereby be disabled - the printer will be unblocked. From time to time, messages about the end of ink may appear, which you should not pay attention to. All Canon devices have their own characteristics, so the proposed method may not help with some devices. Another option is to try disabling the control system via Windows
Many users are wondering how to disable ink level monitoring in printers and multifunction devices, because... messages about lack of toner are sometimes untrue and simply interfere with operation. This problem is especially common when using refilled or non-original (third-party) cartridges.
There are several options to solve this problem. As a rule, the use of one method or another depends on the printer model.
1. This can be done by resetting the chips built into the cartridges. They are precisely designed to determine the ink level and prevent refilling of the cartridge. But resetting the chip is quite difficult.
IN You will need to purchase a reprogrammer, that is, a device with which you can reset the cartridge chip, and this is an additional expense. In addition, the reset procedure requires certain skills, so do not try to learn how to program and reset cartridge chipsets on your own; it is best to ask someone who has already encountered this process to help you figure it out.
2. The second option when disconnecting comes down to the following: check for messages that appear indicating that the device is running low on ink. On the printer body, press and hold the Stop/Reset button with a triangle icon and a flashing indicator for 10 seconds. The ink level monitoring system will be disabled for the specific ink tank (the one for which you received an alert).
3. For some cartridges, there is another method: Open "Control Panel" via menu "Start", in category "Printers and other equipment" select icon "Printers and Faxes". Right-click on the name of your printer and select the item from the context menu "Printer Properties"(on some models« Properties » ). On the tab "Ports" remove the marker from the field "Allow two-way communication". Click on the button "Apply" and close the window.
4. This is a kind of modification of the method described above.Disable the feature "Ink level control" on the computer to which the printer is connected. To do this, go to "Control Panel", select option "Printers". Next, call the context menu on the printer icon, select the command "Printer Properties". Then go to the tab "Service", select option "Printer Status Information", click on the button "Options". Uncheck "Display warning automatically".
5. Also, for certain printer models, there are special utilities that allow you to reset the ink counter (for example, IPTool For Canon IP series or MPTool for Canon MP series). Program MPTool works with printers only when switching them to Service or N isolevel mode.
Service- a mode in which you can perform service operations using the printer buttons. To convert a Canon MP series printer to "Service" mode needed:
1) Turn off the printer.
2) Press and hold the print cancel/resume button.
3) Press and hold the printer power button.
4) Release the print cancel/resume button.
5) Press the Resume/Print button twice.
6) Release the printer power button.
After this, the green LED will blink for some time (the blinking time depends on the printer model), then it will light up constantly and the printer will go into "Service" mode.
Low-Level- operating mode intended for low-level operations with EEPROM printer, in this mode it works with the printerMPTool . To convert your MP-series printer to Low-Level mode needed:
1) Disconnect the printer from the network.
2) Press and hold the power button.
3) Connect the printer to the network.
4) Press the Cancel/Resume Print button.
5) Release the power button. (if the system reports that a “new device” has been detected, install the printer drivers, after installation is complete, name the new printer as "Canon MP XXX Low-Level Mode").
after that, the green and orange LEDs will blink and go out, then the orange LED will light up constantly and the printer will go into "Low-Level" mode. You can exit this mode only by disconnecting the printer from the network.
6. Some printer models have cartridges without a chip. Then, to reset the data, a mechanical method is used to seal certain contacts on the cartridge with tape (or varnish). The fact is that the printer remembers how the last 4 installed cartridges were used ID- identifier. Taping the contacts allows you to make the device believe that 4 different cartridges were installed in it one by one; it will “forget” the ID of your refilled cartridge and will perceive it as new.
Schemes for sealing contacts are individual for different printer models and for different cartridges, so it is hardly advisable to list all possible options here. Those interested can easily find them through any search engine.
P.S. To reduce the printer's ink consumption, set up the economy mode. To do this, open the properties window of your printer as described in the third step and go to the tab "General". Click on the button "Printing Settings" and in the additional window that opens, open the tab "Paper/Quality"(on some models"Home"). In a group "Print quality"select the desired value using the drop-down list or mark the field with a markerEco mode(on some models"Quick Print") to enable economy mode. Apply the new settings.
P.S.S. If you are going to refill a cartridge, you need to do this as soon as the ink runs out. Otherwise, the remaining toner will dry out in the nozzles and it will no longer be possible to revive such a cartridge.
Prepared based on materials from kakprosto.ru,prospekt-st.ru, fb.ru, mnogochernil.ru, vsbot.ru, allart-service.ru, domotvetov.r u, zapravka163.ru, resetters.ru
ATTENTION! This post is for informational purposes only. The author is not responsible for possible consequences and economic damage resulting from inept actions. By using the wrong method, the user risks damaging the printer, so remember that you perform all actions at your own peril and risk, as well as under your own responsibility!!! It is highly recommended not to perform the described manipulations with devices under warranty!!!
Laser and inkjet printers do not have built-in hardware to determine the amount of ink remaining. Instead, software methods for estimating ink consumption are used. The printer calculates the coverage level of each sheet sent for printing. Based on this parameter, the approximate amount of liquid ink or powder toner used is calculated. The information is recorded on a chip, which is usually located on the cartridge. After refilling most models with toner or ink, it becomes necessary to reset the printer.
During reset, information is erased not on the printer itself, but on the chip. Some refill kits also include a separate microcircuit that is installed in place of the old one, the counter of which has been exceeded. Color models may have several such chips. Each of them stores information about the remaining amount of paint of a certain color. Normal use of the device will be impossible until all chips whose life has been exhausted are reset or replaced.
How to reset a printer of any model
When refilling a cartridge at a service center, the chip is usually reset or replaced by the technician performing the service. It is recommended to check in advance whether this service is included in the cost of refueling. Otherwise, you risk being left with a refilled but non-functional cartridge. If the printer is not reset, to restore the correct operation of the device you will have to contact the technician again or find the instructions yourself.
Standard user manuals usually do not contain information on how to reset the on-chip counter. This is due to the fact that printing equipment manufacturers are not interested in providing such data. Most companies recommend not refilling old consumables, but purchasing new ones. Moreover, their cost in some cases may even exceed the price of a new printer with a set of starter cartridges.
Try finding the service manual for your printer model. This document contains detailed steps, diagrams, and step-by-step troubleshooting instructions. It is not intended for distribution to general users, so there is no such manual on the included disc. The availability of service instructions depends on the device manufacturer. Some companies provide it only to authorized service centers, others publish it for everyone in a separate section of the official website.
However, whatever the manufacturer’s policy regarding the protection of proprietary information, you can find repair manuals for most popular models on thematic forums. When the document is found, open it and go to the chapter that describes refilling and maintaining cartridges. Complete the following steps in the required order to reset the printer. Typically, the device will need to be rebooted after this.
Pay attention! On some printer models, you can reset the counter programmatically using a special utility. Other devices can only be reset in hardware, by manipulating the chip.
How to reset a refillable Epson cartridge
Repeated refilling is the recommended maintenance scenario for Epson cartridges. The chip installed on them is used not in the interests of the manufacturer, complicating the refueling process, but in the interests of the user. Its main purpose is to display information about the current ink level in the tanks. You can reset the chip on printers of different models in different ways:
- If the chip does not have a button or two contacts at the top, remove the ink reservoir and insert it back.
- If there is a button, press it and hold it for 5-7 seconds.
- If there are two separate contacts located next to each other, remove the cartridge and close the contacts with any metal object.
Important tip! Confirm your intention to reset the printer when a window with a corresponding question appears. The confirmation prompt may appear either on the operating system or on the LCD screen, if available on the device.
Features of resetting a Canon printer
Methods to reset the chip on Canon devices are much more varied than on equipment from other manufacturers. The recommended algorithm of actions differs depending on the specific model, while for some devices it is indicated directly in the instructions. The most common methods:
- Reset the printer by sealing the desired contact on the contact pad of the cartridge.
- Disable ink level monitoring in device properties.
- Press and hold the cancel button (usually red) for 10 seconds.
- Completely disable two-way communication through hardware properties.
Important! In order to directly reset the information on the chip, you need to use a special device - a programmer.
Read also:
How to make a 3D printer with your own hands: instructions and tips
Types of printers: principles of operation, pros and cons of various types of printing