• kmplayer does not play sound. No sound in KMPlayer. What to do. Drivers for sound card are not installed

    A common problem that an ordinary user of the KMP Player program may encounter is the lack of sound when playing a video. There may be several reasons for this. It is worth solving a problem based on the cause. Let's look at several typical situations in which there may be no sound in KMPlayer and solve them.

    No sound can be caused by either incorrect settings or problems with the computer hardware.

    A trivial source for the lack of sound in a program may be that it is simply turned off. It can be turned off in the program. You can check this by looking at the lower right part of the program window.

    If there is a crossed out speaker there, it means that the sound is turned off. Click on the speaker icon again to restore the sound. In addition, the sound can simply be turned up to the minimum volume. Move the slider next to the right.

    In addition, the volume can be set to minimum in the Windows mixer. To check this, right-click on the speaker icon in the tray (lower right corner of the Windows desktop). Select "Open Volume Mixer".

    Find the KMPlayer program in the list. If the slider is at the bottom, then this is the reason for the lack of sound. Screw the slider up.

    Incorrect audio source selected

    The program may have selected the wrong audio source. For example, the output of an audio card to which no speakers or headphones are connected.

    To check, click anywhere on the program window with the right mouse button. In the context menu, select Audio>Audio Processor and select the device that you usually use to listen to sound on your computer. If you don't know which device to choose, go through all the options.

    Drivers for sound card are not installed

    Another reason for the lack of sound in KMPlayer may be an uninstalled driver for the sound card. In this case, there should be no sound at all on the computer when you turn on any player, game, etc.

    The solution is obvious - download drivers. Typically, drivers are needed for the motherboard, since it is on it that the built-in sound card is installed. You can use special programs to automatically install drivers if you cannot find the driver yourself.

    There is sound, but it is very distorted

    It happens that the program is configured incorrectly. For example, the sound is amplified too much. In this case, returning the settings to their default state may help. To do this, right-click on the program screen and select Settings>Configuration. You can also press the "F2" key.

    In the window that appears, click the reset button.

    Check the sound - maybe everything is back to normal. You can also try reducing the sound gain. To do this, again, right-click on the program window and select Audio>Reduce Gain.

    If all else fails, reinstall the program and download the latest version.

    These methods should help you restore sound in the KMP Player program and continue to enjoy watching.

    KMPlayer is a universal player that can play almost any media file format.

    List of formats that the KMP player supports (VCD, DVD, AVI, MKV, Ogg Theora, OGM, 3GP, MPEG-1/2/4, WMV, RealMedia, QuickTime and others). The program also understands captions on DVD discs and is capable of recording sound, video or pictures from any part of the fragment being played. The player can work with internal and external filters and plugins, which will allow you to control the audio and video parameters of the files being played. KMPlayer includes almost all the major codecs for playing information.

    Supported formats:

    • HTTP Streaming(AVI etc including none-streaming media)
    • Directshow playback (avi, mkv etc)
    • Real Engine + Directshow (needs Real Player or Alternative)
    • QuickTime Engine + Directshow (needs QuickTime player or Alternative)
    • Mplayer Engine Support
    • Winamp Input Plugin(decoder) Support
    • Compressed Audio Album Support(zip, rar)
    • Audio CD(2000, XP only / Win9x-Support by winamp plugin)
    • Video CD/SVCD/XCD: CDXA Format (2000, XP only)
    • DVD playback
    • DTS Wave and AC3 files
    • WDM device support like TV or Camera

      • CD Image File (BIN/ISO/IMG/NRG)

    • NRG needs mplayer.dll
    • Shoutcast (Including NSV)
    • AAC, OGG parser/decoder
    • Shockwave Flash/FLC/FLI
    • Ape/MPC/Flac/Module etc
    • Various Image files like png, gif etc
    • Incomplete/Damaged AVI file (Skip Damaged Frames

    Changes:

    • 3D formats (Side-By-Side, Top-and-Bottom) Video playback support (jeokcheong, polarization)
    • 10-bit H.264 support
    • Intel Vidi support
    • "DV5P" additional codecs
    • FLAC files support for sketchbook art
    • When playing audio files, a thumbnail image of the enhancement display (MP3, FLAC, WMA)
    • ColorSpace error correction
    • Intel codec H.264 error correction playback
    • WinAmp fixes Plugin download
    • Malicious code modulated vulnerability video playback occurs EIP error correction register (subject to vulnerability: KISA)
    • Windows 7 fixes on desktop view
    • Album Art error fixes that do not load normally
    • EVR (C/A) when used in SKIP WMV files are not displayed on the screen to correct errors.
    • KMP HTTP read error fixes
    • MOV files, bug fixes in Parser AAC codec.
    • MKV files SKIP error correction.

    KMPlayer no sound [Solved]

    Anyone who has lost sound in KMPlayer after updating their KMP player or a new installation on their computer. So you need to go to the program settings, press F2, go to the menu Filters → Decoders → Built-in audio decoder, select "USE KMP Audio Codec", close the settings and restart the KMP player. After these operations, the sound will appear in the player.

      KMPLAYER2015

      License type:

      Quacked

      Languages:

      Windows 8, 8 64-bit, 7, 7 64-bit, Vista, Vista 64-bit, XP, XP 64-bit

      Downloaded:

    Setting up KMPlayer

    KMplayer has many settings, allowing advanced users to customize anything they want. The abundance of all kinds of settings can cause panic among ordinary users. Therefore, usually no additional program settings are made and all files are played with default settings. However, it will be useful to change some options depending on the content being played. Moreover, any experiments with settings can be canceled.

    The Reset Configuration button returns the settings to default values. You can get to the settings window either by using the F2 key or by right-clicking on the screen area, then “Configure” and “Configuration”

    The player interface is well translated into Russian, so the meaning of the settings is clear if you know the meaning of some specific terms. Options with values ​​other than the default values ​​are indicated with a red line in the screenshots. In the first screenshot, the “Enable advanced menu” checkbox is checked. This option adds several useful commands to the main menu, such as the ability to take a screenshot of a video. The second has a list of built-in codecs. It is recommended to enable the VC-1 codec here as it is designed for HD video playback.

    The “Decoders” tab allows you to select the codec option for the program. You can use codecs built into KMplayer, either installed ones, such as K-Lite Pack or CCCP, or system ones. The latter can (but not necessarily) help if the file slows down during playback.

    Sound Settings

    Sound settings in KMplayer are quite varied. You can add surround sound. There is a good equalizer. You can experiment with the sliders on other tabs. The "Standard" button returns the settings to default values.

    Image slideshow settings

    KMplayer has the ability to view photos (“Visualization” - “Slide Show”). There are also some settings here. To prevent the player from jumping from picture to picture chaotically, you need to uncheck the random display box. The Standard slide transition effect changes slides without video effects.

    Association of files with KmPlayer.

    KMplayer has a beautiful and convenient set of icons for media files. They are more informative than standard Windows ones. To associate them in the settings, you need to check the boxes next to the selected formats, or click “Select all”.

    All settings in KMplayer are applied immediately, without clicking buttons like “OK” or “Apply”.

    There may be several. Let's look at the most likely of them:

    1. The first step is to check whether the sound is muted in the player itself (the volume may be accidentally reduced to zero) or in the Windows system.
    2. If the previous step did not help, right-click on the active player window. In the context menu that appears, follow the path: “Audio” → “Sound Processor” and try selecting another device. This point is especially relevant when using a non-standard audio output device - external speakers, Bluetooth headset, etc.
    3. The lack of drivers for a sound card, although the least likely reason for the lack of sound in KMPlayer, can also not be discounted. It’s easy to determine the problem - if there is no sound when you turn on Windows and the first item from this list has already been checked, then you should go to the official website of the audio card manufacturer and download the latest drivers for subsequent installation.

    If the sound in KMPlayer wheezes or hisses

    Lately, sometimes there have been problems with KMPlayer of a similar nature, especially after updating to new versions of the player. To fix it, first of all try to “reset” the settings to the default option (F2, then click the Reset all settings button), not forgetting to do “Export settings” using the corresponding key next to it, in case you need to return the changes back.

    If the settings are dear to you and you don’t want to change them so radically, try in the Audio menu (RMB on the player → “Audio”) to reduce the gain using Reduce Gain.

    Read more: