Samsung s7 firmware. Samsung galaxy s7 firmware Chinese. Download the ODIN Flasher

Often, many of you have encountered the fact that your phone, which has served you faithfully, suddenly began to slow down, stopped working properly, or caught a serious virus from which there was no way to get rid of it.

Then make yourself more comfortable. Now we will tell you how to get rid of all these problems with your phone by flashing its operating system.

If this program does not work on this device, you can try to backup your data using the official Samsung data backup program " ".

Attention!!! We are forced to warn you that flashing a smartphone's firmware is a very serious and dangerous process, and if you do something wrong, your smartphone may turn into a brick. WE ARE NOT RESPONSIBLE for all your manipulations with your smartphone, everything you do is done at your own peril and risk, it all depends on how straight your hands are.

If you are not sure that you can perform this procedure, contact a specialist.

Firmware for Samsung S7 Edge via ODIN program

So we will divide our entire process into several stages:

Disable Remote Control

Before you start flashing the firmware, you will need to disable device activation lock in the phone settings; if you do not do this, the process may end with an error. In newer Android devices, this feature is called "Remote Control".

• So we need to go to the “Settings” window, then “Lock screen and protection”.

• Next we need to go to the “Find phone” subsection.

• Here we log in using our Samsung account details.

• In this section we disable the "Remote control" option.

Install original drivers from Samsung on PC

So at this stage we will need to install original Samsung drivers for mobile TV devices.

If you already have these programs installed, then it would be a good idea to double-check for updates. Before installing drivers, connect your smartphone to your PC. After you have installed the drivers, restart your PC.

Checking for correct installation and operation of drivers

Connect the cable to your phone and if the PC recognizes your phone, then everything is installed correctly. If the computer does not see the phone from the original cable, then try changing the cable.

Download the firmware

Download the firmware to your PC and unpack the archive. As for what firmware to download, we cannot tell you, you need to look in the settings of your smartphone for the version of your firmware, you can see the entire set of firmware -

Download the ODIN Flasher

To install the firmware you will need to download the program " ODIN" in which you will flash your smartphone, for S7 Edge download the version "ODIN" not less than 3.12 -

Important!!! never download the Russified version" ODIN"- this will turn your smartphone into a brick. Next, unpack the archive and launch the program.

Try to preferably unpack the firmware files to the root of the disk. Launch ODIN Unpack the file with the flash driver and run the "ODIN" program.

Activate bootloader mode

Turn off the smartphone using the "Power" button:

• Press and hold 3 buttons at the same time: “Home”, “Volume Down” and “Power”.
• We are waiting for the image to appear on the screen of our device.
• Let's release all buttons.
• Press the "Volume Up" button once.

We connect our smartphone to the PC

Go back to the Log tab and connect the downloaded firmware files in the specified order:

1. BL> install the file BL******tar.md5
2. AP> install the file AP******tar.md5
3. CP > install the file CP******tar.md5
4. CSC> install the file CSC*****tar.md5

Starting the firmware process

Completing the download process

After the download is complete, a “PASS!” notification will appear, which will indicate the completion of the download process. After this, the smartphone will reboot automatically. Disconnect the cable and wait for the smartphone to reboot

Firmware for Samsung Galaxy S7 (clone), flashing a Chinese copy of Samsung Galaxy S7. The subject of discussion belongs to the category: Firmware
Copy of Samsung Galaxy S7 Edge

Copy of Samsung Galaxy S7 Edge

Review of Samsung Galaxy S7 edge.
Review of the game Subway Surfers.
Elephone S3 review.
Review of UMI Super.

Samsung Galaxy S7 Neo.
- MediaTek Helio X25 / 4 Gb.
- MediaTek Helio X25 / 3 Gb.
Regular clones (under-smartphones)
- If you are looking for firmware, you need to provide the following information:
1) brand and model of smartphone;
2) technical specifications (you can get them from MTK Droid Tools.

3) it is advisable to publish a photo (upload here).
samsung galaxy S7 clone SM - G920F - Download.
Build number: ALPS.JB3.MP.V1.
Build date UTC: 20161125-141343.

Kernel v: 3.4.39-2217357 (dpi@DELL134) version (gcc version 4.6.x-google 20120106(prerelease)(GCC)) (cs@dell36-PowerEdge-R710) (gcc version 4.6.x-google 20120106 (prerelease ) (GCC)) #1 SMP Thu Nov 28 20:23:43 KST 2013.

LCD Driver IC: 1-st7701_fwvga_boe.
- SP Flash Tool errors and solutions (if you have problems working with SP Flashtool)
If after the firmware IMEI has disappeared, what should I do?

Where to get it or how to build a custom Recovery?
If after flashing the screen does not display the picture (stripes, etc.)
- You have selected the wrong firmware for the LCD Driver parameter, indicate the LCD Driver version and the guys in the thread will try to help.
What to do if the preloader is lost?
- read the instructions in case the preloader is lost.
Post edited by TexnoMozg - May 20, 2017 00:30.

Post edited by TexnoMozg - August 27, 2016 00:32.

In the settings it says that the device name is Galaxy s7, and the model says SM-G920F.
You won't get far with that kind of data. The original will show similar data.

You look at the data from MTKDroidTools, if the program detects your device and shows the data - 100% clone, and then we’ll figure it out further.
MTK Droid does not detect my phone. I can only send information from CPU-Z.

If the body is cut off on MDT, then the preloader is alive and adb is running and the fastboot will start.
So get into the build prop first and stupidly google for the firmware.
Well, unless of course they first demolished everything to hell in a purely noobish way.

That's when the preloader is demolished - this is already a problem, what to sew if under the battery there is an iron frame with stamping f11)
so if anyone here is a sucker, it’s me who took over this body(
Damn, you need an adb driver, and it doesn’t see 64 percent - 92, 95, 35, 52, 53.
92 95 sees, lied(
92 95 sees, lied(
It sees, but does not work with them. It is enough to remove data. I saw Meizu MX3 on Samsung Exynos 5 Octa 5410.
If you want to do something well, do it yourself. (Ferdinand Porsche).

This is a collection of low-level configuration information for 572 unique Android installations. The raw dataset is available here.
Begin exploring it here, or check out the source code on GitHub (client, server).
Another Android device data set is the Android Device Inventory.

There is a utility for reading build props.
Post edited by TexnoMozg - September 3, 2016 00:20.
I once installed it out of necessity, but then took it down - it’s just an infection.
Post edited by TexnoMozg - September 3, 2016 00:21.

This is all good, but does not fit with the problems described above. If the situation is such that MTKDroidTools does not see the device, then other utilities will also not be able to do this due to hardware limitations, not software ones. If there is no connection with the hardware component, the software will not be able to perform the role of a maintenance link.

It's good that it exists. However, it is better to answer on the subject of a topic or a specific post, and not in general, to the extent of knowledge in some area. Those. without taking it out of context.
Previously, about 11-12 years ago, the sellers themselves provided the firmware (sources). Well, and last but not least, the availability of firmware is the uniqueness of the body - if it is a fake clone, the manufacturer simply does not shine.
Well, most of the available firmwares are ROMs in zip format.
when neither the information in the body is no longer available/broken, nor the information from the build prop.
you need to have aerobatics, merge the firmware and find the markings in it, use it to determine the percentage, etc.
I didn’t see the K50t5 at 52 at close range, although it was sutured) first (internal version on ####5993# a7000 a usr s134 1505051536 mp6 v3 len ovo6752 bmain row, and then it was polished on top with vibeui v2.5 1512 5 495 1 st.

Build date UTC: 20160624-072902.
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P4, 2016/04/16 09:00.
Kernel v: 3.4.39-2217357 (dpi@DELL134) version (gcc version 4.6.x-google 20120106(prerelease)(GCC)) (cs@xhldell-PowerEdge-T620) (gcc version 4.6.x-google 20120106 (prerelease ) (GCC)) #1 SMP Thu Nov 28 20:23:43 KST 2013.

In the settings it says that the device name is Galaxy s7, and the model says SM-G920F.
Build number: KOT49H.G900FXXU1ANC9.
Build date UTC: 20150115-034649.
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P4, 2014/07/08 10:19.
Kernel v: 3.4.39-2217357 (dpi@DELL134) version (gcc version 4.6.x-google 20120106(prerelease)(GCC)) (xhldell@xhldell-PowerEdge-T620) (gcc version 4.6.x-google 20120106 (prerelease ) (GCC)) #1 SMP Thu Nov 28 20:23:43 KST 2013.
LCD Driver IC: 1-nt35512_dsi_vdo_lcm_drv.
Post edited by kovaxx21 - September 6, 2016 20:10.

If you want to do something well, do it yourself. (Ferdinand Porsche).
Here is the information from CPU-Z:
Architecture: 4x ARM Cortex-A7 @ 1.30 GHz.
Total RAM: 453MB.
Internal Storage: 1.45 GB.
Release Date: 2016-03-01.
Build ID: JZO54K.G935FXXANC2.
Java VM: ART 2.1.0.

Kernel architecture: armv7I.
Kernel v: 3.10.72 (1461916388)
Post edited by TexnoMozg - September 10, 2016 00:29.
If you want to do something well, do it yourself. (Ferdinand Porsche).

We are waiting for the details to arrive. Nothing to say yet.
Post edited by TexnoMozg - September 18, 2016 23:52.

If you want to do something well, do it yourself. (Ferdinand Porsche).

Yes, any master will tell you that real Chinese phones work great. Firmware S G S7 S G920 Chinese. What official firmware are you currently using? The Chinese and Korean copies of the Galaxy are copied to the smallest detail, even with the naked eye. It will help you flash Chinese S G. Chinese phone 7 firmware new file added. Firmware S G S7 clone, flashing a Chinese copy. S SMG930F G S7 Official firmware

Chinese Copy S G S7 Firmware M6571. Firmware for Chinese S G S7. Chinese copy 7 firmware. Please go to the direct link to download firmware version G930FXXU1DQD7 for S G device. Update S S G S7 phones update and firmware. Firmware for S G S7 S G920 Chinese If you bought a high-quality fake, you will need firmware for a copy of S G S6 SMG920F. If you decide to update the S G S7 firmware, then you must accept all the consequences and the possibility of getting a non-working smartphone from

Flashing S G S7, or rather its Chinese copy. Alexey Zholdin 7 months. A CHINESE device, created exactly where the device was assembled, as a rule, nothing good comes out, nothing better, native firmware, on. Updated firmware is a great way to make important adjustments to the phone system, eliminating it. Instructions for installing the official single-file firmware on the S G S7 SMG930. Chinese Copy S G S7 Firmware M6571 Anton Chkalov. The I P 2 smartphone is an example of an excellent product from a little-known Chinese brand in Russia, which

Firmware for Chinese S G S7 How to update S G S7? Now you can find out a lot about the 7 930 firmware Chinese 4, but there are only so many unique facts. In general, it is almost certain that the software on a copy of the G S7 will slow down and actively glitch, and the update. For Chinese S G S7 M6572 Firmware. For Chinese S G S7 M6571 Firmware In general, the software on a copy of G S7 will almost certainly slow down and. After clicking on the link there is a 5 second advertisement, click. Firmware M6571 S S7 Chinese. I ask for help in finding the firmware for the Chinese copy of S 7

Chinese 7 firmware. In general, the software on a copy of the G S7 will almost certainly slow down. EXACT COPY S G S7 ORDER 70 DISCOUNT LIMITED QUANTITY!

Instructions for flashing the Samsung Galaxy S7 SM-G930 smartphone to the new official or custom firmware. Obtaining Root superuser rights on Samsung Galaxy S7 SM-G930, installing custom recovery TWRP recovery.

How to flash Samsung Galaxy S7 SM-G930 to the official firmware using the Odin flasher program? In order to install new firmware on your smartphone, you first need to download several files to your PC:

Then you need to download any firmware for Samsung Galaxy S7 SM-G930 that you like, for example:

Decoding of models:

Operator models:
SM-G930T (T-Mobile)
SM-G930A (AT&T)
SM-G930P (Sprint)
SM-G930V (Verizon)
SM-G930R4 (US Cellular)
Regional models:
SM-G930I (Australia)
SM-G930F (Europe)
SM-G930G (International)
The prefix D in the model means dual-SIM (Duos)

After you have downloaded everything, unpack the archive with the driver for the Samsung Galaxy S7 SM-G930 and install it. Then unpack the archive with Odin and the firmware.
Run the Galaxy S7 Odin firmware program as administrator. To do this, hover over Odin and right-click and select "Run as administrator", then click "Yes".

After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the field "BL"
The AP……….tar.md5 file is inserted into the field "AP"
The file CP……….tar.md5 is inserted into the field "CP"
The CSC file……..tar.md5 is inserted into the field "CSC"

We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"

We put the Samsung Galaxy S7 SM-G930 phone into firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful flashing, the device will reboot automatically and the message “Finish” will appear in the Odin program. That's it!

Instructions for installing custom recovery TWRP recovery on Samsung Galaxy S7 (SM-G930)

To install custom recovery TWRP Recovery on a Samsung Galaxy S7 SM-G930 smartphone, you first need to download the USB driver and install them - SAMSUNG USB Driver (if you haven’t already done so).
Download and unpack the firmware program – Odin
Download the latest version of TWRP for SM-G930F (herolte) from this TWRP SG S7 repository in .img (Image) / .img.tar (for Odin program) format
In the smartphone settings, enable “USB Debugging” + OEM Unlocking in the “For Developers” settings section, which in turn opens if you click 7-10 times on the “Build Number” item in “About phone” settings section
Then turn off the smartphone and go to the “Download Mode” firmware mode. To do this, with the phone turned off, simultaneously hold down the “Volume Down”, “Home” and “Power” buttons.
Before you enter the firmware mode, the phone will display a “Warning”, press “Volume +” to skip.
Connect your Samsung Galaxy S7 SM-G930 phone to your computer using a standard USB cable.
Launch Odin (previously downloaded and unpacked) and wait for the inscription “Added” (“Added” / “Connected”), and if the inscription does not appear, repeat the previous steps.
After you see the “Added” message, click on the “AP” button and find the previously downloaded TWRP files.
Check the “Auto-Reboot” checkbox
Go to TWRP and flash this file – no-verity-opt-encrypt (it is for normal operation of TWRP)

All!! Your Samsung Galaxy S7 smartphone has a custom TWRP recovery installed.

Installing custom firmware on Samsung Galaxy S7 SM-G930

To install custom firmware on a Samsung Galaxy S7 SM-G930 phone, you must have custom recovery TWRP Recovery, if you don’t have it, see the point above.