Unlocking mts smart start for other operators. MTS Smart Start unlocking and description of the phone. How to unlock an MTS phone if you forgot your graphic password

MTS Smart Start - smartphone for 2990 rubles. In early February, a new branded smartphone with the name MTS Smart Start. The manufacturer of this phone is ZTE. The phone has common features and characteristics ZTE v815w, but is equipped with only one SIM card slot. The phone is sold in two colors - white and black. Also on the MTS website it is indicated that the device only works with MTS SIM cards; how to bypass this limitation will be described later.

Main characteristics of MTS Smart Start

The smartphone runs Android 4.4 OS and is equipped with a 4-inch screen with a resolution of 480 x 800 pixels. As in many budget phones, the processor is from Mediatek, namely the MTS Smart Start MediaTek MT6572 has a dual-core processor with a clock frequency of 1.3 GHz. RAM is only 512 MB. The built-in memory is 4GB, of which 1.2GB is available to the user, so you should immediately think about buying a MicroSD memory card; it supports up to 32GB.

MTS Smart Start, like other Android smartphones, is equipped with a 2G/3G module, Wi-Fi, GPS and FM radio. Of course, we need to mention the camera, and MTS Smart Start has two of them. The main one has a resolution of 5MP, and the front one has a resolution of 0.3MP. During the daytime, relatively good pictures are obtained.

The body is plastic, although pleasant to the touch. Its dimensions are 125x64x9.8 mm. The device weighs only 125g. The phone fits comfortably in your hand. And in our opinion, it will certainly find its buyer.

The manufacturer claims that the phone can operate for up to 8 hours in talk mode and up to 266 hours in standby mode. The battery capacity is 1200 mAh.

How to reset the pattern on MTS Smart Start (hard reset)?
1. With the device turned off, press and hold “Volume+” and the “Power” button simultaneously.
2. On the screen you will see - Hieroglyphs. Press the "Power" button once.
3. Using the "Volume-" button, select the line wipe data/factory reset.
4. Confirm the selection with the "Volume +" button
5. Using the "Volume-" button, select the line yes - delete all user data.
6. Confirm the selection with the "Volume +" button
7. Select the line Reboot system now using the "Volume +" button.
8. That's all.

Unlocking / unlocking MTS Smart Start

At the beginning of this article, it was stated that MTS Smart Start can only work with MTS SIM cards, but the phone manufacturer provides the ability to unlock the smartphone. To do this, it is enough to place a SIM card of a “foreign” operator in the phone, i.e. Megafon, Beeline, Tele2, etc. and thereby you will open a window asking for an unlock code. Where you can get this will be discussed below:

1. You need to write down the IMEI of the phone, where you can find it on the box, either by removing the battery on the sticker, or by typing the combination *#06#, the IMEI will be displayed on the screen.

3. Immediately after payment you will have access to a form to fill out, in which you need to indicate:
- Phone IMEI

3.1 If the form does not appear, for example, you did not click on the “Return to Seller” link, then you should have a letter in your mail with the subject: “ Oplata.Info: purchase on the Plati.Ru platform", this letter contains a link to the purchased product. By clicking on this link you will see a form to fill out.

4. Fill out the form carefully and without errors. Click the "Send" button and instantly, the MTS Smart Start unlock code will be displayed in the paid item section on the same page.

5. Insert the SIM card of someone else’s operator into the smartphone and turn it on. When the phone boots up, you will see on the screen Enter the correct SIM card unlock code (Remaining: 100) and a field for entering the unlock code.

6. You just need to enter the code you received from us and confirm your choice. At this point, the phone is successfully unlocked and is ready to work with SIM cards of any operators from around the world.

Branded phones distributed by telecom operators are tailored for subscribers of selling companies, so they will not work with a SIM card from another operator. To use your phone without restrictions, change the firmware of your MTS Smart Start 3 smartphone.

An inexpensive smartphone with a plastic body, Internet support and built-in Wi-Fi, not distinguished by high performance. It is specially flashed for MTS, so subscribers of other operators cannot use it without first flashing it.

• Runs on the Android operating system version 5.1;
• Camera 2 Megapixels, front – 0.3 MP;
• Screen diagonal 4 inches;
• The internal memory is 4 GB, but is expandable with support for a microSD memory card;
• Bluetooth, GPS, 3G.

With such characteristics, it may not make sense to bother and unlock the MTS Smart Start 3 phone, but for those who have their own motives for such an act, we have prepared fairly detailed instructions on how to do this.

Where to download firmware for MTS Smart Start 3 phone

While some smartphones are compatible with firmware from other gadgets, this does not apply to Smart Start - you will need an individual firmware file. You will have to choose between the official version of the Android manufacturer and custom MTS firmware. The first one is preferable because it contains root, i.e. eliminates operator restrictions. You can download both versions for free online if you search hard enough.

Do not install broken firmware under any circumstances - you will not encounter any problems in terms of technology, and besides, there is still a possibility of attackers getting hold of your personal data. Do you need it?

Smartphone MTS Smart Start 3: firmware for all operators

To unlock your smartphone, find and download the firmware by unzipping the disk in the root. The main requirement is the absence of Russian characters on the way.

The operation will take about 10 minutes. At the end, a red, then a yellow stripe will run, and then you will see a window with the inscription “Download ok”. Done, the smartphone is flashed.

How to unlock your MTS Smart Start 3 phone if you forgot your password

We figured out how to reflash the MTS Smart Start 3 phone, now we’ll solve simpler problems. Have you come up with a security PIN code and then forgotten it? Restore access to your device in just a few minutes.

An extreme way to restore access to your phone is to reset the settings. You will regain access, and the information on it will disappear without a trace. Press one of the listed combinations on the switched off device to get into Recovery. Moving up and down with the volume buttons, select wipe data/factory reset/yes/delete all user data, then reboot the device by pressing Reboot.

Smartphone MTS Smart Start 3- another branded smartphone from the MTS operator. While waiting for smart series smartphones, you always expect that you can get an interesting smartphone for a minimal amount. But when it comes to buying, and you twirl it in your hand, an inner voice says, maybe it’ll wait, maybe the next one will be that very expectation. But unfortunately, no luck this time either. MTS Smart Start 3 is an ultra-budget smartphone from the Chinese manufacturer ZTE, listed in the manufacturer’s classification as ZTE Blade L110. In communication stores, MTS is sold at a price of 2,490 rubles, which is certainly a tempting price. But let's figure out what they want to sell us for this money.

MTS Smart Start 3 runs Android 5.1 Lollipop OS, quad-core Spreadtrum SC7731 processor with a clock frequency of 1.3 GHz. RAM is only 512 MB. The built-in memory capacity is 4 GB, there is also an expansion slot for MicroSD cards. The touch screen has a resolution of 480 x 800 pixels and a size of 4 inches.

The smartphone has one SIM card slot and supports 2G and 3G communication standards. In 2G networks it operates in the following frequency ranges: 850, 900, 1800, 1900, in 3G networks - 900, 2100 MHz. Initially, the smartphone is designed to work with SIM cards only from the MTS operator.

The smartphone is equipped with two cameras: the main one is 2 megapixels, the front one is 0.3 megapixels. The main camera has an LED flash.

MTS Smart Start 3 is equipped with a GPS module, Bluetooth 2.1 EDR, Wi-Fi, accelerometer, proximity sensor, display orientation sensor, light sensor, etc.

The smartphone body is made of plastic, overall dimensions are 65X125X10 and weight is 110 grams.

The battery is used with a capacity of 1400 mAh, according to the manufacturer, it should provide continuous talk time for 7 hours and standby time for 200 hours.

What we end up with is that the MTS Smart Start 3 smartphone was released on the market in 2016, but according to its characteristics, it belongs in 2013-2014. A mediocre camera and only 512MB of RAM, not to mention the screen size. It is clear that everyone is now trying to reduce costs and, after the jump in the dollar exchange rate, to reduce this factor when forming the cost, but in the end the end buyer is left with nothing. This is an entry-level smartphone, and is suitable for both schoolchildren and older people as a device for making calls and sending SMS, but using the phone for games is highly doubtful. Although this aspect will be covered in the review, the video of which you will find at the end of this page.

Unlocking / Unlocking MTS Smart Start 3

MTS Smart Start 3, like all smartphones in the smart line, is designed to work in the network of the MTS operator only. But the smartphone manufacturer, in this case ZTE, retains the standard ability to unlock the phone to use SIM cards from any operators. To display a window asking for an unlock code, just insert the SIM card of a “foreign” operator and turn on the smartphone. You will see the following request on the screen: SIM card is blocked. Enter the UNLOCK code to unlock. Attempts left: 100

1. To receive the unlock code you need to know the IMEI; to do this, just dial the combination *#06#.

2. Knowing the IMEI, we proceed to purchasing the product: Unlocking your MTS SMART Start 3 phone. Code. .

2.1 Immediately after payment you will have access to a form to fill out. If the form does not appear, for example, you did not click on the link "

1. The smartphone manufacturer leaves a standard tool for unlocking it. It is enough to insert a SIM card other than the MTS operator into one of the slots and you will be asked to enter the NCK unlock code on your screen.

2. To receive codes you must IMEI slot No. 1 And IMEI slot No. 2. They can be obtained by typing the combination *#06#

3. Pay for the goods (if you pay through an external payment system ( trading platform) and upon completion of payment you will see a button "