Online song editor to make a backing track. How to remove a voice from a song: list of programs

The question of how to make a backing track (instrumental) from a song interests many users. This task is far from the easiest, so you can’t do it without specialized software. The best solution for such purposes is Adobe Audition, a professional audio editor with almost unlimited possibilities for working with sound.

Looking ahead, it is worth noting that there are two methods by which you can remove a voice from a song and, as expected, one is simpler, the other is more complex and is not always possible. The difference between these methods also lies in the fact that solving the problem with the first method affects the quality of the backing track, but the second method in most cases allows you to get a high-quality and clean instrumental. So, let's go in order, from simple to complex.

The process of downloading and installing Adobe Audition on a computer is somewhat different from that of most programs. The developer suggests first going through a short registration procedure and downloading the proprietary Adobe Creative Cloud utility.

Once you install this mini-program on your computer, it will automatically install the trial version of Adobe Audition on your computer and even launch it.

How to make a minus from a song in Adobe Audition using standard tools?

First, you need to add the song from which you want to remove vocals to get an instrumental part into the audio editor window. This can be done by simply dragging and dropping or through the convenient browser located on the left.

The file will appear in the editor window as a waveform.

Note: Often, vocal parts in songs are placed strictly in the center channel, but backing vocals, as well as various background voice parts, may not be located in the center. This method suppresses only the sound that is located in the center, therefore the so-called residual voice can still be heard in the final backing track.

The following window will appear, here you need to make minimal settings.

As you can see, the waveform of the track has “shrinked”, that is, its frequency range has noticeably decreased.

It is worth noting that this method is not always effective, so we recommend trying different add-ons, choosing different values ​​for this or that option in order to achieve the best, but still not ideal, option. It often turns out that the voice remains slightly audible throughout the entire track, but the instrumental part remains almost unchanged.

Backing tracks obtained by suppressing the voice in a song are quite suitable for use for personal purposes, be it home karaoke or just singing your favorite song, rehearsing, but performing to such accompaniment is certainly not worth it. The fact is that this method suppresses not only vocals, but also instruments sounding in the central channel, middle and close to it frequency ranges. Accordingly, some sounds begin to predominate, while others are completely drowned out, which noticeably distorts the original work.

How to make a clean backing track from a song in Adobe Audition?

There is another method of creating an instrumental of their musical composition, which is of higher quality and professional, however, for this you need to have a vocal part (a cappella) of this very song at hand.

As you understand, not every song can have an original a cappella; it is just as difficult, if not even more difficult, than finding a clean backing track. Nevertheless, this method is worth our attention.

So, the first thing you need to do is add the a cappella of the song from which you want to get a backing track, and the song itself (with vocals and music) to the Adobe Audition multi-track editor.

It is logical to assume that the vocal part will be shorter in duration (most often, but not always) than the whole song, since the latter most likely has breaks at the beginning and end. Our task is to perfectly combine these two tracks, that is, to place the clean a cappella where it belongs in a full song.

This is not difficult to do; you just need to smoothly move the track until all the peaks and troughs on the waveform of each track coincide. At the same time, it is worth understanding that the frequency range of the entire song and the individual vocal part is noticeably different, so the spectrum of the song will be wider.

The result of moving and adjusting one to the other will look something like this:

By enlarging both tracks in the program window, you can notice matching fragments.

So, in order to completely remove the words (vocal part) from the song, you and I need to invert the a cappella track. To put it a little more simply, we need to reflect its waveform, that is, make the peaks on the chart become troughs, and the troughs become peaks.

Note: you need to invert what you want to extract from the composition, and in our case this is exactly the vocal part. In the same way, you can create an a cappella from a song if you have a clean backing track from it on hand. In addition, it is much easier to extract vocals from a song, since the waveform of the instrumental and the composition coincides almost perfectly in the frequency range, which cannot be said about the voice, which is often located in the mid-frequency range.

Most likely, when inverting, the vocal part shifted a little in relation to the entire track, so we need to adjust them again to each other, taking into account only that now the peaks of the a cappella should coincide with the valleys of the whole song. To do this, you need to zoom in on both tracks (you can do this with the wheel on the top scroll bar) and try hard to find the perfect placement. It will look something like this:

As a result, the inverted vocal part, being the opposite of the one in the full song, will “merge” with it into silence, leaving only the backing track, which is what we need.

This method is quite complex and painstaking, but nevertheless the most effective. There is simply no other way to extract a clean instrumental part from a song.

We can finish here, we told you about two possible methods of creating (obtaining) a backing track from a song, and it’s up to you to decide which one to use.

We remove a voice from a song in literally two mouse clicks using online services. How good is such cleaning and whether you will ultimately want to listen to such music. Having slightly strained the search engines, I decided to find some kind of online service that would do everything for me. But as it turned out, there are only two of them, and two of them are Russian services.

There are no such services on the foreign Internet, apparently because the concepts automatically and qualitatively are completely incompatible. Or maybe I was just looking poorly. Although perhaps some of the compositions turn out to be quite good, but after downloading five different songs, I unfortunately did not hear this.

So, for the lazy - Vocal Remover. Go ahead, download the audio file, enter the digital code (captcha) and literally in a minute you’ll be downloading your song without words. At the time of writing this post, the project had more than 700 likes on VKontakte. This means that it is possible that this resource is not so bad in some cases.

The second service is Remove Vocal Online. However, I didn’t even bother downloading the mp3, because... On the service page you can listen to two sound files. The first before the other after cutting out the voice. More than 1300 likes on VK.

After using these services, in some cases the voice is not completely removed and is constantly present, like some kind of echo. It seems that the sound is not cut out, but simply muffled. If you want to completely and efficiently remove the sound, then you need a specialist.

Program to remove voice from song

When using the programs you will have to work a little. To get started, download Audacity from (about 20 MB in size) and install it on your computer. The program is completely free and has a Russian interface language.

1. Open the program, click "File" -> "Open...", select an audio file and click the "Open" button, or use the hot keys Ctrl+O. After loading the song into the program, you will see two blue audio tracks as in the screenshot above.

2. Now you need to duplicate them. Click "Edit" -> "Duplicate" (Ctrl+D).

3. Click the "Quiet" button on the left, on the duplicated tracks. After the actions have been completed, the paths will turn gray.

4. To the left of the original tracks, click on the arrow and select Split Stereo Track.

Each of us has our favorite songs, the words from which we love to hum at certain moments in our lives. Many of us prefer to sing them in the form of karaoke, but our music library may not always contain a piece of music we like without vocals. In this case, special services will come to the rescue, allowing you to make a high-quality backing track from a song online, and then download it to your PC.

There are several applications on the Internet that allow you to quickly and efficiently make backing tracks for songs online. Most of them are free, others are paid or shareware, limited by the length of the free video processed.

The quality of the backing tracks obtained with their help is at an average level, and directly depends on the quality of the base track (in particular, its bitrate), as well as the characteristics of the vocals in the processed composition.

I would also like to note the trend towards monetization of previously free resources for creating backing tracks. Thus, “Vocal Remover Pro,” which was popular in the English-speaking segment and was previously free, has now become paid. Now you can download the result obtained with its help only on the basis of a paid subscription. In general, working with such resources does not present any difficulties.

For this you:

1. Log in to such a resource;
2. Using the “Browse” button, upload a song to it for processing;
3. Then select processing parameters (if available);
4. Click on the button to start creating a backing track.
5. In a couple of seconds, you can already download the result to your PC.

Vocalremover.ru – a popular domestic service that will help you make backing tracks

The vocalremover.ru service is the most famous tool on the RuNet for creating backing tracks for songs online. It has a simple and intuitive interface, allowing even a beginner to quickly and efficiently make a backing track.

The operating principle of the service is based on calculating duplicate sounds for the right and left channels, and their subsequent removal from the track.

Working with the vocalremover.ru website is extremely simple:

1. Go to vocalremover.ru;
2. Click on “Select audio file”;
3. Upload the desired track to the site;
4. Then turn on karaoke mode;
5. Choose the most optimal filter frequency, format and quality of the final audio;
6. Click on the “Download” button.

Ruminus.ru – free online vocal removal

Another domestic service for getting backing tracks from songs online is ruminus.ru. First of all, this is a database of ready-made backing tracks, where we can find the one we need through the search bar. We are interested in the tool presented on the site for removing voices from a composition, the functionality of which we will use.

To achieve this goal you need:

1. Activate ruminus.ru;
2. Click on “Browse” - “Upload” to upload the composition you need to the resource;
3. To create a backing track, click on “Make backing track”;
4. Listen to the result;
5. If you are satisfied with its quality, click on “Download the resulting file.”

X-minus.me - quickly remove voices from songs

The site x-minus.me in its functionality and capabilities is a brother of the above-mentioned ruminus.ru. This is the same database of ready-made phonograms, which includes in its functionality the ability to obtain high-quality backing tracks online. Working with it is similar to other services of this type.

Phonicmind.com – a high-quality English-language resource that will quickly create a backing track

In my opinion, the English-language resource phonicmind.com is one of the best tools with which you can make high-quality backing tracks for songs online. Of all the available analogues, it allows you to get the fastest result, and you can download both the backing track file itself and a separate file with vocals.

A significant disadvantage of this service is its shareware nature, in which the length of the freely processed track should not exceed 30 seconds.

So, how to work with this vocal editor:

Humtools.com – vocal editor for the Google Chrome browser

The English-language resource humtools.com is intended for creating backing tracks. It has extremely simplified functionality and only works on the Google Chrome browser (it may freeze with other browsers).

It's extremely easy to use:

1. Go to humtools.com;
2. Click on “Click here to add file”;
3. After processing the file, listen to the result;
4. Save it to your PC using the “Download Audio” button.

Conclusion

Among the listed resources that allow you to make a high-quality and quick backing track of a song online, it is worth noting the site phonicmind.com - its result, in my opinion, is the best of its analogues. However, it's worth trying the other tools listed above until you find one that works for you.

The modern music industry regularly releases a huge number of tracks for every taste. Some of them gain such popularity that they are given the honor of being sung in karaoke, and more than once. But how can you remove a voice from a song without sacrificing quality? You need to try really hard. There are several different options for this that are worth exploring before choosing.

How to remove a voice from a song

There are several ways to cut vocals from a track you like. This is the removal of voice through online services and additional software, which, in turn, can be paid or free. Each option has its own advantages and disadvantages. Still, most users prefer special programs, since they allow you to perform more functions than online services. Therefore, first of all, it is recommended to pay attention to the following list of software that will answer the question “how to remove a voice from a song?” You should take the choice of program seriously, paying special attention to their capabilities, since the quality of the resulting “minus” directly depends on this.

Adobe Audition

There are situations when you urgently need a backing track for a song. Many will say that you can just find it on the Internet and not bother creating it. But some songs without vocals are completely absent from the World Wide Web or are of such terrible quality that it is simply impossible to use a minus anywhere. Then the questions arise: “What to do? How to remove a voice from a song? It is for such emergencies that the Adobe Audition program exists. It does not require special knowledge and is quite easy to use.

To carry out the necessary actions with this program, its version must be at least 3.0. It can be easily found on the Internet. The Audition functionality allows you to mute vocals in a song and make them almost invisible. However, if you play it on headphones, the voice will still sound distant. In addition, the program has several more quite useful functions that will certainly come in handy when working with musical compositions.

Antares auto tune

This program is very easy to find in free distribution. It allows you to make professional backing tracks. Compared to other options, Antares auto tune removes the voice from the track almost perfectly. True, you will have to tinker a little. But it's worth it. Here you can select intonation, control frequencies, etc. To ensure that users do not have difficulties with how to remove a voice from a song, the program itself can determine at what frequency the deviation occurs and edit it. For more convenient work, all channels are displayed on a graph that can be easily read. After the backing track is ready, using Antares auto tune, another voice is superimposed on top of the resulting melody.

This software is intended specifically for professional processing. Most often it is used to create new tracks. Conventional programs simply mute the sound in the center, which is often sufficient. Therefore, if the question is how to cut a voice from a karaoke song, then it is better to choose simpler methods that reduce all actions to pressing one or two buttons.

Magic Vocal Remover

Magic Vocal Remover is a paid program for removing vocals. You can find a demo version of it on the Internet, which is quite enough to process a couple of songs. Its advantages are that you can work with several audio files at once, and save songs not on your computer, but in a special online storage. All MP3 formats can be processed. After the composition has been processed, you can use additional software to play the backing track in karaoke mode. Therefore, if you need a program for a single case, then feel free to use this option.

How vocal removal works

After the program has been selected, you need to figure out how the voice is cut so that you don’t have to spend a lot of time creating a backing track.

Most songs place the vocals at the center of the compositional panorama. The work of almost all services and software is based on removing one channel from another, thereby drowning out the wave on which the voice is located. If you use a program with a wider range of functions, the gap from which the channel was cut can be smoothed out so that the change in the song does not stand out too much when listening.

Is it possible to remove a voice from a song efficiently?

When removing vocals using simple programs, it is almost impossible to achieve the ideal effect. It will be quite difficult for a non-professional in this matter to create a net negative. Since most programs simply remove the channel with the voice, about 70% of the sounds of other instruments sounding in the composition are also cut out along with this channel. Of course, you can still get a small effect from such a muffling of the vocalist’s voice, but the resulting disadvantage cannot be used in wide applications. Also, removing vocals directly depends on the quality of the track itself. Therefore, if you do not have the necessary skills to work with such software, then it is easier to find the desired composition on the World Wide Web so as not to waste time. After all, the quality of the resulting minus will be no better than those presented on the Internet.

The steps to cut vocals can be considered more theoretical than practical. Therefore, it is definitely impossible to answer the question of how to remove a voice from a song without harming the quality. However, those users who are interested in this issue can, as an experiment, try to get rid of the voice in any composition. Having tried hard, perhaps they will achieve a good result and still find a way to remove the voice from the song.

You can minus the song using the Audacity music editor. If you do not have this program, then download and install it on your computer. Launch the editor and click the “File” tab, in the window that appears, select the desired audio recording and click “Open”.

Once opened, the music editor will convert the audio recording into a spectrum of peaks. Then, in the track management menu, click the “Divide” command, so the track will be divided into two channels – right and left. To ensure the sound in both tracks is the same, select the “Mono” mode for each channel in turn.

When the audio recording is divided into two channels (upper music, lower voice), select the lower channel, click on the “Effects” tab - “Invert”. In the main menu of the program, click the “Play” button and listen to the resulting minus. If the result satisfies you, then select the track and, through the “File” menu, selecting the desired format, save the backing track on your computer.

You can also convert a song into a backing track using the SoundForge program. Download the program, install it on your computer and run. Transfer the audio recording to the editor, in the control menu, click on the “Processing” - “Equalizer” - “Graphic” tab. In the equalizer window that opens, you need to select the 20 Band display mode, since this mode has the maximum number (20) of sound change levers.

Now you need to remove from the audio recording the voice that falls in the middle of the equalizer (lever 7 - 16). Lever 11, located in the middle of the equalizer, must be lowered to the very bottom, and levers from 10 to 7 should be arranged in an increasing order to lever 6, and the same should be done with levers from 12 to 16, smoothly building them in an increasing order to lever 17.

When the EQ levers are in the correct order, press the "Preview" button, this will cut out the voice frequencies and automatically listen to the resulting composition. If you are satisfied with the quality of the backing track, then click “File” in the control menu and save the track in the desired format on your computer.

Please note

As a rule, backing tracks songs are created in recording studios by professional sound engineers. But this service is quite expensive. For an aspiring musician who cannot afford to pay for the creation backing tracks You can create it yourself on your home computer.

You will need

• Computer, Adobe Audition

Instructions

First, let's decide how we will create it. You can select each part by ear using a MIDI editor. However, then you have to substitute the sound of a VST instrument (“ ”) onto the MIDI track. You can also remove it from a plus phonogram by erasing it using special programs. Let's consider this method in more detail.

You can remove a voice from a soundtrack using Adobe Audition. Having launched the program, we open all previously created copies in it one by one. Having opened all the windows, we begin editing the “original” track. To do this, double-click on the track name in the left part of the window. Then, in the “Edit View” section, select the wave image of the track we need by double-clicking the left mouse button.

In this window, using the “Center Channel Level” knob, you can change the center volume. And using “Discrimination Settings”, adjust the width. You can also select the desired preset.

Now, click on the “Preview” button to preview the recording. And if everything suits you, all that remains is to click on the “OK” button.

Video on the topic

Sources:

• How to make a phonogram, backing track?
• how to make a song into a backing track

Mp3 is the most common format playback Files with this extension can be played on a computer. music center, player and even on a cell phone. In order to convert an audio file to mp3, you can use one of the simple methods.

Instructions

In case the music is on a plain CD, use Windows Media Player to convert it to wma format. Launch the program and insert the CD into the drive. After this, the windows media player module will start, copying it to the computer. If this does not happen, launch the module manually and copy the tracks to your computer. Wait until copying is complete, then proceed to the next step.

To complete the conversion, use a program for multiple processing of tracks. The easiest to use is WMA to MP3 Converter. Download it from http://www.wma-mp3.org/. Install it on your computer, then add the tracks you received from the CD in .wma format. This one supports batch processing of files, so you can immediately add all the files you copied from the disk. Once the conversion is complete, listen to the resulting tracks. If the quality does not suit you, proceed to the third step.

Download and install Adobe Audition or Sony Sound Forge. These are professional audio editors that have high quality processing and a user-friendly interface. Unfortunately, they don't support multiple conversions, so you'll have to process the files one at a time. Launch the audio editor, then open the track you need through the "File" menu. Listen to it and make sure you're comfortable with the volume. If this is not the case, use the Normalize tool. Normalize the track to 110% and listen. If the track runs without noise or crackling, save it. Process all files copied from the CD in this manner.

Video on the topic

Useful advice

Audio editors convert files much better than batch processing programs, so use it only in case of acute lack of time.

Sources:

• how to remake music format in 2019

To convert the stove into a fireplace, it is necessary to make a number of reconstructions: demolish the stove firebox, lay out the fireplace. This is a very labor-intensive process and you cannot do it without certain skills. Therefore, before you start disassembling the stove, carefully think through all the details of the future fireplace.

You will need

• - simple brick;
• - fire-resistant brick;
• - cement;
• - sand;
• - boards for the shelf;
• - facing material.

Instructions

The easiest way to remodel a stove is to simply install a Finnish glass door instead of the stove door. At the same time, all heating properties will be preserved, but the functions of a fireplace will additionally appear. This option is the most economical both financially and in terms of labor intensity. After reinstalling the door, decorate it in folklore style. And on cold winter evenings you can spend time contemplating the flames of the fire through the glass door.

First, disassemble the old stove to its foundations. You can use old bricks to build a fireplace podium. It will burn fuel. Carry out construction using cement-sand mortar. Place niches for firewood in the body of the podium. Cover them with three rows of ordinary bricks or a row of ordinary bricks and fireproof bricks placed on edge.

Set up a portal on the podium, this is the place where the combustion process itself will take place. Determine the portal in accordance with the overall dimensions of the room. It shouldn't take up too much space. Be sure to calculate the dimensions of the combustion window. If you make it much larger than intended, you will get constant drafts and hypothermia of the room. And such a fireplace is usually very strong.

Calculate the smoke opening of the fireplace. It should be 10-15 times smaller than the area of ​​the combustion chamber opening. You may have to narrow the chimney a little.

Set the depth of the firebox in relation to the height of the portal as 1 to 2 - 2 to 3, because a shallower depth will cause smoke, and a larger depth will reduce heat transfer.

Cover the portal opening of the fireplace with brick lintels. Arrange them in a special (circle) manner. Start the work by laying the heels. Support the circle with temporary supports. After the support heels, install the central brick on the circle and continue laying simultaneously on both sides. The overlap of curved vaults and smoke collectors should be no more than 6 cm.

Modern models snowmobiles are quite expensive, so an excellent solution to save money would be a snowmobile converted from motorcycle. In addition, a snowmobile is a very bulky thing and takes up a lot of space in the garage. And this problem will also be solved by a motorcycle, which will help out both in summer and winter.

You will need

• - motorbike;
• - ski for snowmobile;
• - caterpillar belt;
• - lugs;
• - protective casing;
• - trunk;
• - braces and shock absorber rod.

Instructions

Now you can put the caterpillar belt on the resulting wheel structure. The tape should run exactly along the wheel rims. The lugs can be made of aluminum and measure approximately 25 by 25 mm. The lugs allow the snowmobile to handle snow and ice well. Without them, it will be almost impossible to brake on slippery roads and on high roads.

Video on the topic

Please note

Before operating a homemade vehicle, check it for reliability and safety. At first, it is not recommended to develop high speed on a homemade snowmobile to avoid accidents. On frosty winter days, there is a high risk of moisture getting into the fuel supply system. Care must be taken to ensure that this does not happen.

Useful advice

To make a snowmobile from a motorcycle without any special skills, you can use the EXPLORER MOTO system. This design is good because it is installed directly on the motorcycle and does not require its dismantling. And most importantly, the EXPLORER MOTO system provides a variable center of gravity of the snowmobile. If you move the track backwards, you can overcome difficult obstacles created by deep snow.

The reversibility of electromagnetic phenomena allows the use of certain types of electric motors as generators. This makes it possible to build on their basis power plants with foot, wind and other drives.

Instructions

Use a commutator electric motor with a permanent magnet on the stator as a generator without any modifications. When its shaft is rotated at a frequency close to the nominal one, it will produce a constant voltage, also close to the nominal one. The polarity of this voltage depends on the direction in which the shaft is rotated. To filter the output voltage, that is, to remove bursts of self-induction and interference from sparking, use chokes and capacitors. Electrolytic capacitors can only be turned on with respect to polarity, and if they are present in the filter, the generator can only be spun in one direction corresponding to this polarity.

For a universal commutator electric motor, which has electromagnets instead of permanent magnets on the stator, first modify it a little: disconnect the leads of the stator winding so that they are no longer connected to the brushes. Apply constant voltage to this winding - first from the battery, which is charged from the same generator, and when voltage appears on the brushes, the excitation winding can be powered from the generator itself. To prevent the battery from discharging through the generator when it is not driven, use a reverse current relay (or diode), and to prevent overcharging the battery, use a relay regulator. Both relays must be designed for the same voltage as the generator, and their connection diagrams are given in their passports or on their cases.

When the shaft spins, an asynchronous electric motor will not switch to generator mode unless special measures are taken. Connect three non-polar capacitors to it so that the resonant frequency of each oscillatory circuit, composed of a winding and a capacitor, is equal to the synchronous frequency. Connect the capacitors like this: the first - between phases A and B, the second - between phases B and C, the third - between phases A and C. The generated alternating voltage will also be three-phase.

Stepper motors differ from all of the above in that they need to be rotated at a low frequency. Connect two diodes to each of the terminals of such a motor: one with the cathode to the terminal and the anode to the minus of the filter capacitor, and the other with the anode to the terminal and the cathode to the plus of the filter capacitor. Thus, the total number of diodes will be twice the number of motor leads.

Currently, on various websites you can find backing tracks for almost all famous songs. Some of them were recorded in professional studios, and some were created by folk craftsmen who synthesize sound effects on computers.

The largest and most famous sites from which you can: http://a-minus.org/, http://x-minus.org, http://b-track.ru/, etc. They differ from each other only in the interface and the set of tracks available for downloading. There are no problems in downloading the backing track of a song to your computer from one of these resources. You don't even need to register. Using the search system installed on the site, you need to find the required track and download it with one click. At the same time, the site may have several backing tracks of one song, differing in their quality. Therefore, you can choose the most suitable option.

If none of the sites listed above has the backing track you need, or it sounds unsatisfactory, then don’t despair. Continue your search on the Internet, most likely the record you need will be found on some resource. It may be that the song is new and the backing track for it is simply not available yet, then you just need to be patient and wait.

However, there is also an option: you can try to create a backing track from an existing song yourself. This can be done either using a special program, for example Adobe Audition, or on the website http://x-minus.org/remove-vocal-online. This service allows you to “suppress” vocals in any track. The performer's voice will not be completely removed, but will become significantly less noticeable.

Video on the topic