Download scanning driver for Samsung scx 4824fn. Performing a sequential memory search

Samsung SCX-4824FN

Windows 2000 / 2003 / 2008 / 2012 / XP / Vista / 7 / 8 / 8.1 / 10 - universal driver

For users who have the above versions of Windows installed and you were unable to install the drivers listed below, you can use it, which will help install the required driver.

Windows 2000 / 2003 / 2008 / XP / Vista / 7

Bit options: x32/x64

Driver size: 71 MB

Windows 2000 / 2003 / 2008 / XP / Vista / 7 - scanning driver

Bit options: x32/x64

Driver size: 9 MB

How to install driver on Windows 10

When connecting any peripheral device to a computer, driver installation is required for initial setup in the system. This is a simple procedure that will take no more than two minutes. Let's look at installing the driver using the Samsung SCX-4824FN printer as an example.

The system will ask for confirmation of the actions, and after consent the installation wizard welcome window will appear. Then everything is simple - you need to follow the installer's prompts. In the first window, you need to select Russian (or another from the drop-down list) and click the “Next” button.

In the new window, select the appropriate type of printer installation, in our case it is “Typical local printer installation”. After checking the box next to this option, click on the “Next” button.

If the printer is not yet connected to the computer, the wizard will remind you of this with the following message:

If all actions are performed correctly without changing their order, the installer will go to the following window:

To complete the driver installation process, you need to click the “Finish” button, after unchecking the “Yes, I want to register” checkbox, which is usually the default.

Procedure for manual download and update:

How to perform automatic download and update:

Recommendation: Novice Windows users are recommended to update Samsung Laser Multifunction Printer device drivers by using the DriverDoc driver update utility. DriverDoc makes it easy to update SCX-4824FN drivers by automatically downloading and updating them.

Additionally, when you use DriverDoc to update your Laser Multifunction Printer drivers, you'll also keep all of your other PC drivers updated by leveraging our extensive database of over 2,150,000 drivers (with daily updates), covering every hardware device.

Install optional products - DriverDoc (Solvusoft) | | | |

Samsung Update Frequently Asked Questions

What do Samsung Laser Multifunction Printer device drivers do?

Device drivers, such as those developed by Samsung specifically for the SCX-4824FN, help the Laser Multi Function Printer and the operating system interact correctly.

What operating systems are compatible with SCX-4824FN drivers?

Windows has a valid driver for the SCX-4824FN.

How to update SCX-4824FN drivers?

The two main ways to update SCX-4824FN drivers are manually using Device Manager, or automatically using driver update software.

What are the benefits and risks of updating SCX-4824FN drivers?

Updating your Laser Multifunction Printer drivers will improve your PC's performance, unlock hardware features, and resolve any incompatibilities. The risks of installing the wrong SCX-4824FN drivers include software crashes, loss of functionality, PC freezing, and system instability.

About the author: Jay Geater is President and Chief Executive Officer of Solvusoft Corporation, a global software company focused on innovative service offerings. He has a lifelong passion for computers and loves everything related to computers, software and new technology.

The maximum resolution depends on various factors, including the speed of your computer, available disk space, memory, the size of the scanned image, and the selected scan bit depth. Therefore, some resolutions (especially the highest resolutions) may not be available depending on the system and scanned image characteristics.

Basic scanning operations

You can scan originals using a USB cable or over a network.

Samsung Scan Manager: You can simply scan your originals using the control panel of this machine, and the scanned data will be saved in the My Documents folder of the connected computer. If the installation process is completed, Samsung Scan Manager is already installed on your computer. This function can be used over a local or network connection.

TWAIN: TWAIN is the default image processing application. When you scan an image, the selected application launches, allowing you to control the scanning process. This function can be used over a local or network connection.

Samsung SmarThru Office: This software expands the capabilities of the device. This program can be used to scan images or documents over a local or network connection.

WIA: WIA stands for Windows Images Acquisition. To use this feature, the computer must be connected directly to the device using a USB cable.

Email Email: You can send the scanned image as an attachment to an email message.

Scanning from the control panel

This device allows you to scan documents from the control panel and easily send them to the My Documents folder on your connected computer. To use this feature, the computer and device must be connected using a USB cable or network.

Additionally, Samsung Scan Manager allows you to open scanned documents using another pre-installed program. Programs such as Microsoft Paint, Email, SmarThru Office, OCR can be added to the application.

Image scanning results can be saved in BMP, JPEG, TIFF and PDF formats.

Scan to App

1. Make sure your device and computer are properly connected to each other and turned on.

Ready to Scan will appear on the top line of the display.

4. Press the left/right arrow until Scan appears on the bottom line of the display. on your PC, then click OK.

5. Press the left/right arrow until the desired setting appears in the display, then press OK.

6. Depending on the connection port, the text of the message may differ. Read these messages and move on to the next step.

Scan Destination: Connected via USB. Go to step 7.

ID: Connected via the network and the user is registered. Go to step 6.

A Local PC >: Select a USB port or network to scan. If the device is connected via USB, go to step 5. If the device is connected via a network, go to step 6.

Unavailable: Not connected via USB or network. Check port connections.

7. Press the left/right arrow until the desired port appears on the display.

8. Enter your registered user ID and PIN, then click OK.

The ID is the same username (ID) as registered for Samsung Scan Manager.

The PIN is a four-digit number registered to Samsung Scan Manager.

9. At Scan Destination, press the left/right arrow until the software application you want appears on the display, then press OK.

The default value is My Documents.

To add or remove a folder for saving scan results, add or remove an application using Samsung Scan Manager > Scan Settings.

10. To scan with standard settings, click Start. Press the left/right arrow until the option you want appears, then press OK.

11. The scanning process will begin.

The scanned image is saved in the My Documents > My Pictures > Samsung folder on your computer. You can use the TWAIN driver to quickly scan from Samsung Scan Manager.

You can also scan from the following Windows menu options: Start > Control Panel > Samsung Scan Manager > Quick Scan.

Configuring Scan Settings in Samsung Scan Manager

You can view information about Samsung Scan Manager and the status of the installed scan driver. You can also change scan settings and add or remove folders where scanned documents are saved when scanning to your computer using Samsung Scan Manager.

Scan Manager can only be used on Windows and Macintosh operating systems. If you are using Macintosh.

1. Select Start > Control Panel > Samsung Scan Manager.

Samsung Scan Manager The Administration dialog box appears.

You can open Samsung Scan Manager by clicking the Smart Panel icon directly on the Windows taskbar.

2. Select the desired device in Samsung Scan Manager.

3. Click the Scan Options button.

4. Scan Settings allows you to change the save location and scan settings, add or remove applications and change the file format.

You can change the scanning device using the Change port function (in local or network mode).

5. When you complete the settings, click OK.

Scanning over a network connection

If your machine is connected to a network and the network settings are configured correctly, you can scan and send images over the network

Preparing to scan over a network

Before using network scanning features, you must configure the following settings depending on the application to which you are sending the image:

To send scan results via email, you must register as an authorized user. Set up an SMTP server to scan and then send files by email.

User authentication for network scanning

To send a scanned image via email or network, you must register local or network authorized users using the SyncThru Web Service.

If user verification is enabled, only authorized users specified in the local or server database will be able to send scan data over the network (email attachment, over the network).

To use the Network Scan Authentication feature, you must register your local or network authentication settings with SyncThru Web Service.

To scan users, one of three modes can be selected: none (default), network scan, and local scan.

Registering Local Authorized Users

3. Select Local Authentication on the General Settings tab of the User Authentication web page.

4. Click the Add button.

5. Select an index from 1 to 50 corresponding to the location where the recording is saved.

6. Enter your name, authorization ID code, password, email address and phone number. Before scanning to email, you must enter your registered user ID and password on the machine's control panel.

7. Click the Apply button.

Registration of network authorized users

1. Enter the device's IP address as the URL in your web browser, and click Go to go to the device's website.

2. Click the Device Settings button.

3. Select Network Authentication on the General Settings tab of the User Authentication web page.

4. Click Apply and OK.

5. Select your preferred Authentication Type.

6. Set the values ​​for each function according to the instructions below.

7. Click the Apply button.

Setting up an email account

To scan and send an image as an email attachment, you must configure your network settings using the SyncThru Web Service.

1. Enter the device's IP address as the URL in your web browser, and click Go to go to the device's website.

3. Select IP Address or Hostname.

4. Enter the IP address in dotted decimal notation or hostname notation.

5. Enter the server port number in the range from 1 to 65535. The default port number is 25.

6. Check the box next to Require SMTP Authentication to enable authentication.

7. Enter the login name and password for the SMTP server.

8. Click the Apply button.

If your SMTP server uses POP3beforeSMTP authentication, select the check box next to SMTP requires POP3 before SMTP authentication.

a. Enter the IP address in dotted decimal notation or hostname notation.

b. Enter the server port number in the range from 1 to 65535. The default is port 25.

Scan to E-mail Software

You can send the scanned image as an email attachment. You must first set up an email account in SyncThru Web Service.

Before scanning, configure the scan settings for the job.

1. Make sure your device is connected to the network.

2. Load original documents face up in the document feeder, or place one original face down on the document glass.

3. Press the Scan/Email button.

4. Press the left/right arrow until Scan to Email appears on the bottom line of the display, then press OK.

5. Enter the recipient's email address and click OK. If you have set up an address book, you can use the shortcut keys or quick or group entry of email addresses to retrieve addresses from memory.

6. To enter additional addresses, click OK when Yes appears and repeat step 5.

To go to the next step, press the left/right arrow to select No, then press OK.

7. If the display asks if you want to send a message to your own address, press the left/right arrow to select Yes or No, then press OK.

This prompt will not appear if Auto Send to Self was enabled when you set up your email account.

8. Enter a subject for the email and click OK.

9. Press the left/right arrow until the display shows the file format you want, then press OK or Start. The device will begin scanning and then send an email.

10. When the display asks if the user wants to log out, press the Left/Right arrow to select Yes or No, then press OK.

11. Press Stop/Reset to return to ready mode.

Change settings for each scan job

Your product supports the following settings to help you customize your scan jobs.

Scan Size: Specify the image size.

Original Type: Specifies the type of original document.

Resolution: Specify the image resolution.

Scan Color: Specifies the color mode.

Scan Format: Specifies the file format in which the image will be saved. If you specify TIFF or PDF, you can choose to scan multiple pages. Depending on the scan type you select, this option may not appear.

To configure settings before starting a scan job, follow these steps:

1. Press the Scan/Email button.

2. Press the Menu button until Scan Function appears.

on the bottom line of the display, then press OK.

3. Press the left/right arrow until the scan type you want appears on the display, then press OK.

4. Press the left/right arrow until the scan option you want appears on the display, then press OK.

5. Press the left/right arrow until the display shows the options you want, then press OK.

6. To configure other settings, repeat steps 4 and 5.

7. When finished, press the Stop/Clear button to return to Ready mode.

Changing default scan settings

To avoid having to customize scan settings for each job, you can set default scan settings for each job type.

1. Press the Scan/Email button.

2. Press the Menu button until Settings appears. scan on the bottom line of the display, then press OK.

3. Click OK when Change appears. silent..

4. Press the left/right arrow until the scan type you want appears on the display, then press OK.

5. Press the left/right arrow until the scan option you want appears on the display, then press OK.

6. Press the left/right arrow until the display shows the options you want, then press OK.

7. To change other settings, repeat steps 5 and 6.

8. To change the default settings for other scan types, click the Back button and repeat from step 4.

9. Press Stop/Reset to return to Ready mode.

Setting up an address book

You can set up an address book with frequently used addresses using the SyncThru Web Service, and then easily and quickly enter email addresses using their assigned slot numbers in the address book.

Registering E-mail Address Quick Entry Box Numbers

1. Enter the device's IP address as the URL in your web browser, and click Go to go to the device's website.

2. Click Device Settings and Email Settings.

3. Click Personal Address Book and Add.

4. Select the cell number and enter the username and corresponding email address.

5. Click the Apply button.

You can also click Import and get your address book from your computer.

Configuring Group Address Box Numbers

Enter the device's IP address as the URL in your web browser and click Go to go to the device's website.

1. Click Device Settings and Email Settings.

2. Click Group Address Book and Add.

3. Select the group cell number and enter the group name as you wish.

4. Select the email address quick entry numbers that will be included in this group.

5. Click the Apply button.

Using Address Book Entries

Use one of the following methods to retrieve an email address.

Email Address Quick Entry Box Numbers

When you send an email message and are prompted to enter the recipient's address, enter the email address quick entry number under which the desired address is stored.

To enter a single-digit cell number, press and hold the corresponding key on the numeric keypad. If the cell number is two or three digits, press the first digit buttons and hold the last digit button.

You can search for an entry in memory by selecting Address Book.

Group address cell numbers

To use a group email address, you must find it and retrieve it from memory.

When you are prompted to enter a destination address when sending an email, click Address Book.

Searching for an entry in the address book

The device supports two ways to search for an address in memory. You can scroll through the list alphabetically, or search by the first letter of the name associated with the address you're looking for.

Performing a sequential memory search

4. Click OK when All appears.

5. Press the left/right arrow until the name and address you want appear on the display. The list can be scrolled up or down in alphabetical order.

Search by first letter

1. If necessary, press the Scan/Email button.

2. Press the Address Book button until Search and Send appears. on the bottom line of the display, then press OK.

3. Press the left/right arrow until the desired bin number category appears on the display, then press OK.

4. Press the left/right arrow. When ID appears, click OK.

5. Enter the first few letters of the name and click OK.

6. Press the left/right arrow until the name you want appears on the display, then press OK.

Printing an Address Book

You can check your Address Book settings by printing it as a list.

1. Press the Menu button until Settings appears. syst. on the bottom line of the display, then press OK.

2. Press the left/right arrow. When Report appears, click OK.

3. Press the left/right arrow. When Address Book appears, click OK.

4. Press the left/right arrow. When the message El. appears. mail, click OK.

Recently, the procedure for connecting peripheral devices to a computer has become much simpler. One of the stages of this manipulation is downloading and installing suitable drivers. In this article we will look at methods for solving this problem for the Samsung SCX 4824FN MFP

Before proceeding with the steps below, we recommend connecting the MFP to your computer and starting the device: this is necessary to verify that the drivers are installed correctly.

Method 1: HP Web Resource

Many users, in search of drivers for the device in question, visit the official Samsung website and are surprised when they find no mention of this device there. The fact is that not so long ago the Korean giant sold the production of printers and MFPs to Hewlett-Packard, so you need to look for drivers on the HP portal.

Once the download is complete, run the installer and follow the prompts to install the software. You don't need to restart your computer to work.

Method 2: Third Party Driver Installers

The task of finding and installing suitable software can be simplified by using a special program. Such software can automatically detect components and peripheral devices, after which it downloads drivers for them from the database and installs them into the system. The best representatives of this class of programs are discussed in the article at the link below.

In the case of printers and MFPs, the DriverPack Solution application has proven its effectiveness. It’s easy to work with, but in case difficulties arise, we have prepared small instructions that we advise you to read.

Method 3: Hardware ID

Each component of your computer's hardware has a unique identifier that helps you quickly locate the software you need to run it. The Samsung SCX 4824FN device ID looks like this:

USB\VID_04E8&PID_342C&MI_00

This identifier can be entered on the page of a special service - for example, or, and from there download the necessary drivers. You can find more detailed guidance in the following material.

Method 4: Standard Windows tool

The last method of installing software for Samsung SCX 4824FN is to use the Windows system tool.

1. Open "Start" and select "Devices and Printers", on.

   

   On newer versions of Windows you will need to open "Control Panel" and from there go to the indicated point.

2. In the tool window, click on the item "Installing the Printer". In Windows 8 and higher, this item is called "Adding a Printer".



3. Select an option "Add a local printer".



4. There is no need to change the port, so just click "Next" to continue.



5. The tool will open "Printer Driver Settings". On the list "Manufacturer" click on "Samsung", and in the menu "Printers" select the desired device, then press "Next".



6. Set the printer name and press "Next".

The tool will automatically detect and install the selected software, at which point the use of this solution can be considered complete.

As you can see, installing the driver for the MFP we are considering is very simple.