Creation and configuration of a local network. Computer and workgroup name

The principle of creating a local network in any version of Windows (XP, 7, 8, 10) is practically nothing no different. Exceptions are complex multi-level corporate networks, where several subnets, proxy servers and VPNs are used.

But in this article we will look at how to create home network without resorting to purchasing expensive equipment, but using a regular switch or router with Wi-Fi support.

What is needed to create a network

First of all, to create a local network of a certain number of computers, we need equipment:

Please note: if a direct connection is used (i.e. we insert a twisted pair into both devices without using a router), then you will need not a standard cable, but cross— over, except when modern network cards with MDI-X support are installed. In this case, you can use the standard crimping method.

How to create a local network

Now let's proceed directly to creation. First we need to prepare:

• Install all equipment in its place - computers, routers, etc.
• We crimp cable, if necessary.
• Let's do wiring, i.e. we extend the twisted pair to the equipment.
• Connecting twisted pair equipment.

Costs pay attention, that when the connection is made and all devices are started, the connection connectors on the computers should shine. The same applies to routers with routers, only they have light bulbs located on front panel. If any light is not lit, then the connection has been made. wrong.

When the connection is made, you need to configure the network in the operating system.

To begin with checking working group, for which we go to properties " My computer" You don’t have to open the properties, but use the combination Win+ R and enter in the window sysdm. cpl.

On all devices working group should be is the same, otherwise the computers will not see each other.

To change the group, just click on the button change and enter the group name. Name must be entered Latin alphabet, and match on all devices.

Then we look for network icon in the notification area and with its help we get to Network and Sharing Center.

Here we are interested in the link change additional parameters, it's third from the left and will allow you to edit sharing settings. In each profile we select: Enable network discovery, auto-tuning And general access to files and printers.

Scrolling page and below turn off shared access with password protection. All other settings can be left. Click Save changes and exit.

This completes the setup. The network should work, but only if your router distributes dynamic addresses.

If you used a router, or the devices were connected directly with a cable, then you need to make a few more settings.

Network settings

In case direct connection or using a router, we need change IP addresses of computers. For this necessary:

We will not describe what each setting is responsible for, because... This is quite a large topic. It is enough to enter the addresses described above on all computers.

After making all the above settings, the network should work. However, do not forget that a firewall or antivirus software can completely block the network. Therefore, if nothing works, check their settings or temporarily disable them altogether.

Local network via WiFi router

Setting up a network through a router is absolutely nothing no different from what we described above.

If the device is configured to distribute dynamic addresses, then there is no need to change the addresses. Well, what if IP users static, then you will have to use the previous section.

Also, there will be no difference between whether the device is connected by cable or via Wi-Fi; in most routers, the settings for distributing addresses are configured simultaneously and wireless and on wired connection.

How to make shared folders

After everything is configured, you need to create shared folders for information exchange.

However, this is not yet enough. Now on the folder properties window you need to find the bookmark safety. And then press successively Change – Add.

Hello friends. In the previous article, we dealt with the issue. Today I will start talking about how to set up a channel on YouTube and give a step-by-step checklist with instructions for beginners.

I spent the last 2 days working on the structure of my channel and decided that after all, I would run two channels. One will be personal, with live videos, and the other will be educational, with various video tutorials on remote work and everything related to it.

1. Vasily Blinov- my personal.
2. Remote School- educational.

I created a new channel, which I will set up with you from scratch. In general, for me, setting up a new project is a one-time process. You’ve thought through everything, set it up, launched it, and then you just focus on new content and promotion.

A lot of things depend on the correct setup of a YouTube channel and its design and affect its promotion and earnings. Therefore, I recommend that you devote 2 to 3 days of time to set up, study all the articles that will be discussed further, and launch your project 100%.

To make the entire setup process clear, first of all, I’ll write out a complete checklist of what needs to be done.

Checklist for setting up a YouTube channel

Now, if you go to my new channel from a computer, it looks completely empty. If you also just created your channel, then it looks the same for you.

YouTube's settings are actually a big mess and many newbies can't even find where they are.

What issues will we solve along the way? In this article I will only give a short overview and provide links to detailed instructions for each setup item. If you have already made some settings, then simply skip an unnecessary step.

Step 1. Verify account and additional features

The very first step we will start with is confirming your account. To enable additional YouTube features in the future of the channel, you need to confirm it by phone number and indicate the country.

Step 2. Come up with and change the name of the channel

The second step, I think, is to come up with an interesting and original name for the channel. In separate articles I will give some tips on coming up with a name and instructions on how to change it.

Step 3: Add Keywords

In this lesson, we will look at what keywords are and why they need to be entered in the settings. Do not confuse channel keys with tags that are assigned to each video. There will be a separate discussion about tags when we optimize before and after loading the video.

Step 4. Create a description for the channel

We create a good description and insert it on YouTube. In the instructions, I explained in detail what it affects and gave some tips on how to write it.

Step 5. Add links to external resources and social media. networks

Immediately after the description in the same tab, you can add useful links for subscribers to external sites and your social networks. All links will be displayed beautifully in the lower right corner of the header.

If you have your own website, then in the same step you can link it to your channel.

Step 6. Set a channel avatar

Let's move on to the external part. An avatar (icon) is the face of the channel; in a separate instruction I will give some tips on how to create and install it.

Step 7. Make the header (cover)

At the 7th step of setting up the channel, we need to make a background screensaver (header) for the channel. An important element because it creates a general impression of the project and complements it visually.

Step 8. Make a Channel Trailer

The trailer is one of the main elements of setup and design. This is the first thing a new guest will see when they land on your YouTube page. Therefore, you need to take a more responsible approach to its creation and make it super interesting for your target audience.

Step 9. Create playlists (if necessary)

In addition to information about creating, setting up and working with playlists, in this manual you will find information on how to display them on the shelf of the channel’s main page. Creating partitions is also a very important setting.

Step 10. Set the channel logo

The basic channel settings on YouTube are over, now there are additional ones, not so important, but they also play a minor role and help in the work. First, let's look at how to set a branded channel logo, which will be shown in each video.

Step 11. Set preferences for downloading new videos

This feature with default settings not only makes the process of downloading new videos more convenient, but also saves a lot of time in total. If you are going to upload a lot of new videos every week, then it is worth studying and setting it up.

Step 12. Install a channel promotional video

Step 13: Change Channel URL

(article with instructions will come later)

There are 13 necessary steps to fully set up your YouTube channel. I recommend studying them all.

All this is necessary for the brand and retaining its audience, thereby improving promotion on YouTube. We will talk about this in a separate article.

So, take the lessons, set up your channel and see you later. Be sure to subscribe to blog updates so as not to miss interesting material on YouTube, and ask any remaining questions in the comments.

How to create and set up a Facebook business page to promote your business on the Internet. If you already have a business page on Facebook, then you will probably try to make sure that it gives the maximum return, and for this you need to make maximum efforts on customization. In this article, I will give you some tips on how to improve the recognition of your page and, with it, your brand on Facebook. To create your page, log in and scroll to the bottom of the page to the footer and click Create page or follow the following link: http://www.facebook.com/pages/create.php I would also like to draw your attention to the fact that You don't need a Facebook profile to create a page! Next, select a category for what you are going to promote, enter the name of your Facebook page and agree to the rules that are offered to you. Please fill out all the information you need. As you have probably already noticed, the address of your page is very long and not easy to remember. But this is easy to fix. Type 25 Like and after that you can enter the page settings and edit the address like this: http://www.facebook.com/imya_vashei_stranitsi. This address is much easier to remember. But be careful when choosing a name, because once you get more than 100 Likes, you will no longer be able to edit it. Next, you should choose a good image for your avatar. The maximum allowed dimensions are 540 pixels high and 180 pixels wide. It is advisable to write the URL of your website or blog on the image, as well as other information that you consider important, but do not overload the avatar with text. If you already have your own website, then you should be familiar with traffic analysis tools, such as Google Analytics. Facebook is trying to keep up in this regard and also allows you to view and analyze traffic statistics for your Facebook page. In order to see it, you just need to click on View statistics in the right column. To increase traffic to your page, you need to spend at least 20-30 minutes a day on Facebook. 50% of the time should be spent updating content, writing news, responding to comments, and the remaining 50% should be spent on other people’s pages, commenting on them and leaving links to yours.

Date: 2018-08-30 Sergey Rusanov - Blog about business

Comments and reviews: 26

1.jollymuse
Thanks for the useful information. A year has passed since the video was published, but I’ll ask anyway. I created a business page, but I can’t enter a username, I followed the instructions, but there is some kind of time limit, but no explanation of how long it should take before I can use the “enter a username” function... based on your experience how long can this last?

2. Inna
Hello, Sergey I didn’t immediately understand that first in the settings we make a short link to “Username” - for the main page, and at the end of the video a link to “Username” - for the business page. But she did. But now I don’t know how to set up the “Add button” on the business page. Hide a link with a call to action under it? Do you have a video on this topic?

3. M MN
Hello Sergey. I have a question regarding Facebook.
I have a business page with 6,000 subscribers.
What opportunities open up with so many subscribers?
I don't have a button - Like Page when I publish a post to a group.
Could you tell me how to install it?
Thank you.

4. Vyacheslav Koskin
Thanks for the video, very useful. Did I understand correctly that the photo tab cannot be excluded. My page displays the latest publication and then immediately all the photos that I uploaded to the page, and only then all the remaining publications.
Is it possible to remove the block with photos or hide it somehow?

5. Yana ya
Hello Segrey, I watched your video but did not find the answer to my question. Tell me why my company is not displayed in the general search on Facebook? If I type the exact NAME, it gives out. And if a general search gives me all the similar ones in this city, except for me. I just can't find the reason. Thank you

6.Mr. Channel
Hello, Sergey. I have one question for you: I created a page 7-8 days ago, and I already have even 300 subscribers, but on Facebook it says that I have “70 likes + 230 this week.” What should I do, why didn’t I receive 230 like marks??? Please answer me

7. Alisa Cherkasova
Hello, I encountered a problem - for some reason it is impossible to enter a username for the Page ((NOT change, but initially set, although there is a green check mark when entering. Tell me how to deal with this problem. Or is Facebook glitching (for the second day already)

9. Daria Gudyr
Hello Thank you for the very informative video I really liked it. I would like to ask what type of page to choose for a psychologist? I saw that some psychologists have the category psychologist, but I didn’t find that in the list.. Please help me figure it out

10. galynalaz
Thank you, Sergey. I like the clarity and speed of explanation. I have a question. I have a personal account and a group that I created out of ignorance... I am a guide in Madrid. I understand that I had to create a page(((What should I do? Is it possible to change the category. Thank you. Galyna_Lazaryeva

11. Timur Islakaev
Sergey, good afternoon, if you don’t mind, please write an answer to the question, I am developing websites, which category is better to create a page? "Brand or product" or "Entrepreneur"?
Thank you, I hope for an answer.

12. Vyacheslav Dyubailo
Good afternoon Sergey Thank you for the video tutorial, but I still have a question: I was making a page for an internet radio station on FB, and I would like it to have a constant broadcast from the internet page. Is this possible and how to do it? Thank you in advance

13. Elena Panasenko
Thank you very much for the informative and easy-to-understand video. Did I understand correctly that the page is created from an account, only its name can be changed (so that my main account is not visible to subscribers)?

14. Zinaida Yakimova
I created a page, but there is no “STORE” button in the left menu, like, for example, in your account. How to add this button to create a store on FB. Or what does its presence or absence depend on, like mine...?

15. Oksana Gennadievna
Hello Sergey Please tell me what type of page I should choose, if, for example, the topic is entertainment, fashion, life hacks, etc. But I also want to make money on my page as an affiliate.

16. Gulzhan Shyntemirkyzy
Hello Sergey, thanks for the video. Can I ask a question? How can I set up a clickable button on a page so that when I click it, a person will immediately be taken to my messenger? thank you in advance

17. Nataliya Savinkina
Are an account and a business page different things? I have an account for personal photos and posts for friends. I want to make a page for business and personal brand development. Do I need to create a new Facebook account?

18. TopFive MMA
Hello Sergey
can you help me. I have a page for 30k people and I wanted to start making money, the page is already 2 months old
what do you advise me to do
or which partner services to contact?

19. John Dukov
Sergey, visitors to the page on which I sell goods can go to my personal account and look at photos and posts not related to business. Should I create a separate account for my business?

20. Anna Karashchuk
Sergey, thank you for your clear explanations. Tell me how to insert a video from YouTube onto your page to fill with content so that its origin is not visible?

21. Tamara Poliakova Knight
What is the difference between a page and a group? What is your best recommendation for business? Is the number of friends counted on this page and in your personal account together? Thank you

22. Valeria Petrenko
Sergey, thank you for the informative video and wonderful guide to action.
Thanks a lot. Easy to understand and repeat.
I wish you good luck.

23. Vyacheslav Yasinsky
Hello. I saw a block in groups that is located immediately under the pinned post, called “Products for sale”, how to create it?

24. Anna Shcherbakova
Thank you for your clear, clear presentation. With little to no familiarity with Internet technologies, I was able to create my own business page without difficulty. success

25. Qnarik Tadevossyan
Hello Sergey. I saw on several pages that a message window opens automatically when you enter the page. How is this done? Thanks in advance.

26. Lyuba Groza
Thanks for the video. I'm just starting my business. Of course, not everything is immediately clear, but I’ll try to figure it out, and there are some things that won’t be completely for “dummies”

Today we will create our own website in a few minutes on WordPress. Such actions really take a few minutes, from start to working and full-fledged website.

Material prepared with the support of: www.nasmillion.ru

Hosting for WordPress. Hosting cost.

In a nutshell, how the work will go. First, you will need a place to host your future website, such placement is called “Hosting”. The most convenient, cheap hosting that will help solve most issues right away is Beget.

Directly from the hosting panel, you can immediately install your future WordPress site in two clicks.

The minimum package for a blog or news site is the “Blog” tariff. Tariff cost: 135 rubles per day. You can compare, on any other hosting the price will be around 100 rubles plus or minus. Beget is convenient because it does a lot for you and is suitable for those who do not want or are not ready to understand the technical details of the installation.

Excellent and friendly technical support is ready to solve even comments on setting up the site, without any problems.

After registration, log into the control panel, go to the “Service Management” section. Choose your tariff (for example Blog), make a payment and the first step is behind us.

Website name and address for WordPress. Domain for the site.

Now we need the address at which our future website will open, for example www.primer.ru. The website address is called “Domain”.

In the Beget control panel, go to the “Domains and subdomains” section, and then select the “Register a new domain” tab.

Here you can choose the address of the future site. Think carefully and take your time, in the future it will be very difficult to change this address, the site will immediately lose all its positions and promotion will have to start again.

Fill in all required fields and register your address.

Creating a website in the control panel.

Now we have an address, almost everything is ready. In simple language, we must indicate what should open at this address and where it is located. The same thing as giving a link to a folder on your computer.

Go to the “Site Management” section and enter the name of the folder, for example “primer” and select your address (domain) in the drop-down menu.

Click on the “Create” button. Now your domain opens this folder, you can check the work by finally going to your address. You will see a notification that the site has been successfully added, a greeting from Beget.

Important step: HTTPS – for a WordPress site. Free SSL certificate.

For those who do not understand, we simply recommend that you complete this task in advance and install the HTTPS encryption protocol for your site. In the future, you will have to do this anyway, and without doing it in advance, you will have to redo a lot of things and lose the position of your site.

In the “Domains and subdomains” tab, where you have already created your domain, opposite the domain name there is a small “SSL” icon. When you click on it, you will be prompted to install a free SSL certificate for your domain. It’s really free and such a certificate is enough for any future tasks.

Confirm the installation and wait until you receive confirmation by email that “The SSL certificate has been successfully installed on your site and the site is accessible via the HTTPS protocol”

After successful installation, proceed to the next step.

We install in advance - PHP 7.1 and HTTP 2.0

Don't worry, everything is done automatically, don't be scared by these complicated names and actions.

It’s very simple, opposite your site in the “Site Management” section, click on the icons with the names “PHP and HTTP”, where we select the latest versions of these protocols. This will also be useful to us in the future.

Installing CMS WordPress on the site.

Beget – helps for free install the latest version of WordPress, directly from the control panel. It's very simple and can be done in two clicks.

Go to the "CMS" section. In the “CMS Installation” table - select WordPress and enter the required values ​​in the drop-down panel:

• The installation site is the folder you created.
• The default domain is your website address
• Site description – you can change it later
• Administrator login - for security, come up with your own, different from ADMIN
• Administrator password – be sure to come up with a complex password, preferably a generated one
• Email – enter the administrator’s email, which must be working.

Now click on the “Install” button.

Wait until the installation is completed and a notification will be sent to your email. You can check the successful installation of the site by visiting your site address, where you will see a successfully installed WordPress site and the message “Hello World!”

Installation complete!

Installation of WordPress site on your domain is complete, everything is very simple. It takes much longer to read these instructions; the second time, if you remember everything, you will be able to do it in 5-7 minutes.

From your control panel you can install and create as many websites as you like and even make money from it.

Access to the WordPress site control panel

Our site looks like a standard template that is automatically selected during installation. To change site settings and edit its appearance, we will need access to the control panel.

Access to the control panel of any WordPress site is provided at: www.youraddress.ru/wp-admin

At this address you will receive the following fields: administrator login and password. Enter your details and click login.

After logging into the control panel, you will be able to change the appearance and settings of your site. Install the necessary plugins and themes to design the site.

Basic WordPress site settings.

First, we will need to configure the basic parameters of our site, which will be difficult to change in the future.

Click on the "Settings" section. Fill in all fields.

• Site name – this is what your site will be called when users see it in a search, for example in Yandex or Google.
• Brief description – a description that will make your site easy to find.
• WordPress Address (URL) – do not change it under any circumstances!
• Website address (URL) – here you can specify the address that users will see, for example without www
• Everything else is up to you

Go to the “Permanent Links” section, where select the “Post Name” option, thereby your pages and posts will automatically open via links that include the name, for example: www.youraddress.ru/post-name/

Installing and selecting templates for WordPress

All popular templates have long been freely available, you can download and select them. We do not support pirated distribution of templates and always buy ready-made templates from developers.

WordPress template database – Themeforest

The most important thing is that you can try it, work with it and decide whether the template is suitable for your needs.

Paid templates always have serious technical support and all future problems will be resolved within 6 months from the date of purchase, free of charge!

You can choose any WordPress site:

• Business card website
• Landing
• News site
• Online store

After choosing a suitable template, register and pay for it. In the Downloads section you will receive a link to download the archive and installation documentation.

Installing a WordPress template on your website.

You have downloaded the archive, unpack it into a folder and go into it. Most often, the folder includes other folders: Documentation, Template name.

Be sure to read the installation documentation; the attachments may even include a video on how to install the downloaded WordPress theme.

Attention! Now we will describe the standard procedure, which may differ from what your developers require, but most often the actions are very similar.

Selecting a WordPress theme and installing it.

Go to your WordPress dashboard and click on the Appearance section. Select "Themes" from the drop-down menu. Here you can install any templates you downloaded or choose the free ones that WordPress itself offers.

At the very top of the page there is a button - “Add new”, click on it and on the next page in the same place, the “Upload theme” button will appear. Now you must select the theme file you downloaded earlier and click on the “Download” button.

After downloading, the theme will appear in the list of available ones and you need to select it with the “Activate” button.

The theme has been successfully installed and the template is ready to use.

Installing Demo Content for the selected template.

In order for the template to look exactly the same as it looked when you selected it on the developer’s website, you will need to download Demo Content, which is also usually located in the folder you downloaded.

It happens that Demo Content is downloaded automatically; this will be indicated in your documentation.

You may need the “Export - Import” function if the developers simply saved their version of the site and sent it to you.

During installation of Demo Content, make sure that your Internet access is of high quality and is not interrupted. Also, be sure to check the “Download related content” checkbox, this way you will download all the demo images and pages.

After installing Demo Content, the site should already look 80% the way you chose it.

Selecting the look and feel of your WordPress site and home page.

Most likely, now you need to select a home page from those provided by the developer. There are usually a lot of options.

Some nuances need to be configured in the control panel and individual settings of your theme; all these nuances are described in the documentation.

The site is ready for work and content!

We can congratulate you, your website has been successfully installed and is ready to go. Remember that WordPress is convenient because any improvements and functions can be connected automatically using plugins. Everything you want to add is in the “Plugins” section.

We recommend that you familiarize yourself with the most popular plugins, read about them and install the ones you need. Be especially careful about the security of your site. Review of plugins on our website.

Enjoy it for your health. Successful promotion to you and speedy appearance in the search!

In order to start using the Mindbox system, you need to set up data exchange between Mindbox and an external system (website, mobile application, cash register, etc.). This exchange of data is called integration. We need to create a way to identify each client system (website, application, etc.) in Mindbox in order to transfer data. This unique way is called an integration point.

The integration point for each client system is created once. By selecting an integration point during data exchange, we uniquely identify the client system being used and apply the settings saved for it.

If you need to integrate a website, two landing pages on different domains, a mobile application and cash registers in offline stores, you will need 5 integration points.

For each integration point, you can define rules for confirming contacts, configure access to the user account, and indicate sites on which the Mindbox js tracker is installed.

In order to create a new integration point, you need to go to the section Menu - Integrations- Add an integration point.

Let's take a closer look at each setting block:

1. Integration point ID- system name that is used when calling operations.

For each integration point, the Mindbox manager initiates a number of operations (registration on the website, placing an order, etc.). When the client performs an action, the corresponding operation is called. For example, a client starts placing an order → the “Place an order” operation is called → the action enters the system and is assigned to the client.

2. About the integration point:

A. Name - the name of the integration point in a form convenient for you. For example: “Landing for domain.ru.” Is not the system identifier of the point. Used for informational purposes.

b. Application type - for the integration point to work correctly, specify the type of application that will be used with it.

c. Secret service key - ensures the security of data transfer. To generate, click on the “Generate” link.

If the secret service key from one of the integration points is compromised, the remaining integration points will not be affected due to the uniqueness of the service keys for each of them.

3. Attribution settings

A. Point of contact- it tracks where the user came from and where he performed actions. The point of contact must be unique for each integration point.

b. Flag "This is an integration test point". If enabled, all clients created through this integration point are marked as test clients.

4. Contact confirmation settings- necessary only for projects with a personal account on the Mindbox side.

Specify which contacts should allow registration, authorization and password recovery. A contact marked as giving access to an account has a special status in the system. It is not possible to re-register a client with such a contact. Different clients having access to an account cannot be combined.

5.Account access point settings- necessary in most cases only for projects with a personal account on the Mindbox side.

If you need to check that the email belongs to the subscriber and he agrees to the newsletter, use a separate subscription confirmation mechanism ().

Why might you need to confirm contacts?

Let's take the case of using the Mindbox loyalty program. You can allow spending points only for those clients who have a confirmed phone and/or email. Subscription confirmation is not suitable in this case, since the user can unsubscribe from mailings, but continue to use the loyalty program.

6. Websites with Javascript SDK- indicate the addresses of sites on which the Mindbox js tracker is installed. Information about customer activities will be collected exclusively from these sites. The block is available only for the “Site” application type.

Examples of using integration points and their settings within one system:

• You only have 1 site. We create 1 integration point.
• You have a website and landing page. You want to collect a database of emails, but at the same time understand which site they came from. To do this, create two integration points, one for the landing page, the other for the website. For each integration point, indicate your contact point (the contact points should not coincide!). When you want to find people who came through a landing page, it will be enough to filter clients by point of contact.

The choice of integration point when working in the Mindbox system is also related to the import of customers/orders and depends on the data source.

For example, if you are loading clients who have registered on the site, select the integration point site (usually the name of the site is indicated).

In any unclear or doubtful situations, contact your manager.